Counting matching models…
Update 2: I wanted to make a slightly different collecting tray and connect it to the segments. I succeeded, but it was difficult to connect it to the segments. Which is actually logical, because the container brings a stiffness to the…
I experimented with making a segmented flexible hose. Took a few tries until I got the tolerances right. But it works great now. Print instructions Category: Machine Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
General Don't forget to check out the other models: Version #1 Version #2 Version #3 (this model) Prolog This dice tower was inspired primarily by my work by multiple artists. However, this model was created from scratch (not a remix) to…
This three segment storage bin was inspired by the “Pen, Pencil, Markers, Stuff Holder for Honeycomb Storage Wall” by K2_Kevin. I liked his design, but was looking for something that would hold everything vertical instead of at an angle.…
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…
A bigger version of my 75mm flexible hose. More or less made for my specific situation. That's why there's the Y-split piece. Print instructions Category: Machine Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
This is a segmented chameleon keychain, created from an svg file found at flaticons.com. Icon made by Freepik from www.flaticon.com. The gaps turned out a bit too big for my taste. I may go back and make them smaller and add more segments.
Flexible 2.5in (63.5mm ID) segmented/modular hose system designed in such a way that all parts can be printed in vase mode for faster prints and to ensure a good seal between each component. The hose is capable of 90° bends with 6…
Each file creates a different angle template 10 for 36°; 12 for 30°; 16 for 22.5%; 20 for 18°; 24 for 15° Use your favorite print settings. Primary use is to set angle arms on a wedgie sled used to saw segmented for segmented woodturning.
The original design was screwed onto the back of the printer. I wanted a magnet mount in case I needed to clean. This design uses (4) 6mm x 2.5mm magnets. This should fit all current Bambu machines, I have tested on X1C and P1P. 2023/8/10…
This is my first 3d printing design and the excuse reason for buying a Prusa mk3s. Before watching Marius Hornbergers video on practical printing I thought that the only thing you can print are figurines and parts for a 3d printer.…
Big Thanks to teslapunk for his model. This is an adapter for his Flexible segmented vacuum hose . I drew this model in Inventor. Also check out Flexible Hose for Dust Extraction by Makers Manual I used Prusament PETG to print the parts.…
This version of my parametric box is used to create segmented dividers for multipart storage. Follow the quick guide below for how to modify. Open the Change Parameters function and modify the amount of Rows or Columns you desire From…
This hose has a 40mm diameter at the end and can plug directly into a 40mm HT-tube. At the other side is a nozzle that reaches around your drill and collects most of the dust. The nozzle prints in two parts and must be assembled with…
It's a simple magnetic interface that directs the Bambu poop through the segment tubing. Update 2/12/24: After about a week from uploading the original model, someone mentioned that the tube connector was backwards and was catching the…
This is a set of shoulders, and armor that i modeled for my own custom Dummy 13 "Zendwarth". They're scaled to the standard Dummy 13 frame, HOWEVER, these have never been printed under 250%. You MUST Scale these up before printing. I…
A name tag for your lanyard that features “displays” that you can colour in yourself! Assembly Instructions 3D-print the name tag model you want! Available in either 7-Segment or Dot-Matrix options. Using a marker or pen, write your name…
Eye holes, pivoting jaw, and segmented into parts for assembly
A flexible segmented hose makes a great air duct for the exhaust fan on my 3D printer enclosure. Inspired by several other terrific segmented hose models , I built my own segmented modular hose model and library! I chose OpenSCAD so the…
Wanted to use teslapunk's Flexible Segmented Vacuum hose with my Festool CT MIDI I so I remixed etinen's adapter to be merged into the original DN40 part from the Flexible Segmented Vacuum Hose. Update: Didn't like how tall the original…
Parametric module to create a piece of segmented track for Thomas- and Brio-compatible wooden train sets. This is similar in play value to the branded "wacky track" or "crazy track". This includes its own brim to hold the shape together…
This attachment adds a spool buffer mounting port to the top of the Cassette Buffer. This attachment is made by modifying the official segmenter-R3.stl file. The usual rear attachment port is retained, so you can use either the top or the…
Container for leatherworking harness needles. Made to fit needles that are up to 2 5/16" (59mm) in length. Lid screws on with a ¾-10 UNC thread, so if there are issues printing, the threads can be cleaned up with a standard tap.
I've remixed my version of air_ 's magazine rack to make vertically stacking multiple racks a little cleaner and using a little less space. It uses these magnets to secure the rack to your safe or gun cabinet. There are 3 segments. The…
I've designed a segmented hose with an inner diameter of 50 mm. The models of Marius Hornberger inspired me to create a dedicated diameter for all 50 mm users as I am. The hose has a pretty tight fit; however my workshop is only around…
I wanted to build a poop container for my Centauri but didn't like the idea of having to rebuild something else once the ams came out for it. Since I already had one of the “(The original) Bambu lab segmented poop chute pipe” models on my…
A detailed Version 2.0 skull-shaped fidget toy made with a distinctive segmented construction. The individual sections give the model its unusual appearance and make it interesting to hold and play with. The skull design combines a…
A elegant Angel in vase mode The size is made to put a tealight inside. Just Print it without bottom layers and with a 0.8 line width with your 0.4 nozzle which is possible without any modification. Printing in normal mode is also…
This utilizes two “ universal hooks " which need to be printed separately (file included)
This is a brimless version of the segmented train track. Category: Playsets
I remixed the “segmenter-R3” to be closed for the other open side. This way it is a lot stiffer and also the benefit of bolting the other side as well. This makes a very strong buffer segmenter for the MMU3. Update 7-11-2023 Added…
During preparation of my MMU3 parts I try to colorize the machinery a bit. So I retinkered the org. Prusa file with TinkerCad and gave the indentations a shot of color. Hope you like it. Explore my other Printables:…
This model is compatible with the lego system.
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
print 13 Segments 100% infill 0,12layer for stiff CLICK Have Fun
Jemně po-upravený model, předělán pro MMU dvoubarevný tisk, pro snažší přečtení, z duvodu zavěšení nad MK4 , čelem k sobě - nikoliv dozadu, jsem potřeboval otočit pořadí číslic, aby bylo schodné jak na MMU3. První role v pravo, Pátá v…
Holder for Flexible segmented vacuum hose 40mm with clamp or screw possible.
These parts are designed to use a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I decided to build out some parts so I could print a camera mount with vase…
Elevate playtime with this remixed ball launcher, meticulously scaled for Bambu P1S (or equivalent) printers! Inspired by the original design ( printables.com/model/119577-tennis-ball-thrower ), this version offers seamless printing and…
I was very happy to find https://www.printables.com/model/568673-segmenter-of-prusa-buffer-in-multicolor - but there has been a new revision on the parts since that model was made, so I remixed with the new R4 version in place of the R3…
Just a osVAC adapter for https://www.thingiverse.com/thing:4522208 . Should also be customizable. Please download the f3d file and create your model with the matching size/parameters. Check out our Youtube-Channel for more DIY and osVAC…
Segmented box with spout (front only) and lid for honeycomb storage wall system (HSW). I use this for my filament clips but it's good for any small objects. It needs two “empty-insets” to be fixed to the HSW. The hinge parts are quite…
Hi everyone, may I present to you, a modified version of the segmenter (r4) for multicolor print. The segmenter is a part of the MMU3 buffer. In segmenter-R4-separates-models.3mf are all letters separated, so you can easily print single…
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/192489 === Separate your pills, Skittles, M&M's, or whatever you have with this 2 compartment container/bottle. This allows you…
A remix of https://www.thingiverse.com/thing:4522208 for proper dust collection air flow. Added is a fitting to mate up to a generic 2 1/2" dust port. funnel_male_chamfered.stl was added for printing round side down on a raft. With a…
A recursive curvature design. Designed to print without supports. If you download or collect, please "Like". _________________________________________________ The resin print is available for purchase at the following website: Structural…
DIY fumes extractor: - heavy stand (uses 100x100x25mm metal scrap bought from local ebay like site as ballast) - articulated segmented arm (Marius design) - connection to 75mm flexible hose (threaded connection) - cheap duct fan with a…
Segmented dust collection hose compatible with various nozzles and connectors. All parts print without any supports, with 0.3 mm constant layer height. The tolerance values between the ball and the socket part are kept tight. PLA works…
i prepare color version for segmenter (R3 version) print with text side to heatbed Buy me a coffee: https://ko-fi.com/jokereuc
I was looking for segmented poop chute like the Bambu from @JP_196628 for my new Qidi plus 4 plus it can be removed like the mount from @GreySiD_886425 but I could not find one, so I remixed to combine both ideas to make Qidi plus4…
Nessuna effetto pratico sul sistema buffer, ma solo un fatto estetico. Valido sia per la serie R3 che R4. Parametri di stampa come per l'oggetto originale. Sorry for my bad english. No practical effect on the buffer system, but just an…
Original design was done by Willie McCoy on Maker World. I have segmented the head, neck frill, and body from each other to be printed separately and then glued together. I have created a second file for the neck frill to be printed in…
My printer doesn't like the magnet holes, and I printed a magnetless Gridfinity. Whipped this up with the use of the Parametric Web Generator. Please excuse the dirty bottom, it printed very clean, but I had glued my print surface so it's…
Intended to be glued to trashcan's lid after making a hole in it
print flexi_100_connection.stl from Marius Hornberger and pause at layer 245 and place Part-A on top and continue printing. After printing, connect to Part-B with 6 M4 12mm cylinder screws and screw to the wall/table. the outer diameter…
Update After a discussion with a https://www.printables.com/@PennybridgePioneer (see comments) and some time in between I noticed that I could improve the center piece – read further down what and how. Problem We have some obstacles…
Meet the flexi mouse, a little grey character built in three body segments that shuffle and bend in your hand. She prints fully assembled in one go, so there is nothing to glue, clip or fiddle with once the bed cools. The tail is a fixed…
TLDR: If you just want to print it on a single plate mostly dialed in print the .3MF: PLA hoop-4-segment-one-build-plate - If you like it as a thank you go watch some of my videos and drop thumbs up! My models will be free for the…
This model lets you mount the MMU3 Buffer on the side of the Prusa Enclosure like a wall clock. Prusa Enclosure has numerous holes on the side and the back, so it can be mounted on one of them. Since the original "segmenter-R4.stl" part…
This simple cylinder is segmented into 5 mm areas. Each area is 4.8mm tall with a 0.2mm ring (totaling 5mm). Intended for use with 0.2mm layers, each area can have it's parameters altered and the rings make it easy to tell where a change…
This design produces a star with a radius of 117.8mm, giving a tip-to-tip distance of 224mm, and a thickness of just over 25mm There are two versions included: one without LED holders and one with them. The LED holders help to keep the…
A simple basket for cutlery, or other long objects like pens, etc. If you align the segments you have 2 groupings. Change orientation to form 4 or more groupings. Why I wanted to create something that was easy to print and modular. Also…
Onewheel Pint segmented magnetic fender (OW Pint segmentový magnetický blatník)
This is a remix of the R4 buffer MMU version by Filmmax. I have it mounted facing forward so I wanted the numbers to go from left to right instead of right to left. This upload only includes the faceplate and the numbers, you'll need to…
Anticipating a higher volume of filament waste after I receive the Canvas (multi-color) add-on for my Centauri Carbon, I needed a different poop collection solution than the moderately sized drawer type collector I'm now using. Also, with…
My parents have this mirror for years, I believe it's from IKEA. There are multiple segments held in the corners between a plastic part attached to a wall with a screw, and a snap-in cover. One of the covers got lost so I modeled and…
Because my printer is sitting in a dark corner, I wanted some light to better watch the first layer. The light consist of seven white LEDs, witch are soldered together and powered via USB. (see wiring diagram; Resistor should be about…
LED diffuser assembly designed to attach to the 1515 extrusion of the Railcore II. The assembly is designed for 10mm wide LED light strips that can be cut in 100mm segments. Each assembly dovetails into another so that the diffuser…
A unique Segmented Owl Fidget Toy 2.0 designed for satisfying movement and endless fidgeting. The owl-inspired shape gives it a distinctive look, while the segmented construction allows the parts to move smoothly in your hands. Perfect as…
An osVAC inlet for @MartinsMusing_252528 superb Flexible segmented vacuum hose . For print instructions etc have a look at the original model page.
Hier findet Ihr ein Modell das Ihr für verschiedene Tests nutzen könnt. Vom Grund her ist es eine Erste Schicht Kalibrierung für z.B auf dem Prusa Mini Live Z einzustellen, jedoch kann es auch für Tests zu Temperatur, Flussrate,…
This project arose out a discussion with the owner of a liquid resin type 3D printer, and his inability to print change gears as they were too large for his print bed. I do not own a liquid resin printer, so I tested my design with my FDM…
A 50mm tall, 250mm diameter segmented circle with lap joints. This was made for pouring tools for telescope mirror making, with a filleted edge so it can be set against the mirror in question to produce a matched curve. Print 4 of these…
Needed an attachment to my fan to attach the flexible segments to.
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Print all external pieces flat on the bed and use tree supports to support the upper part of…
Magnetic poop chute for the sigmented pipe. With 8 4mm by 2mm magnets.
The original model has three perimeters (0.4 mm nozzle). Vase mode model for .4, .6 and .8 mm nozzles. Printed with PLA. Other material and extruding width need further testing. Do not scale this model, since the imbrication of both ends…
My take on a food dehydrator to filament dryer modification. The segments interlock to make a 13" or 165 mm diameteter ring that fit MrCoffee brand dehydrators. The rings are high enough for two filament rolls can be stacked to…
I have always been a huge fan of the Flexie Rexie and many other articulated 3D printed animals that have been made. When I saw this amazing model I really wanted to be able to print out one in many different colors without having to need…
I wanted to scale up my trefoil knot print, so I designed a version which can be printed in “fit-together” segments. Print Instructions The knot is printed in six segments with “socketed” connections. In order to keep track of the…
A bit different then the multi-extruder model. This comes with a keyed base to assemble the various conic section pieces. There are a couple options with this design: Single extruder, small volume and/or multi-color/material Print each…
Definitely use a raft, it's pretty topheavy, doesnt need supports though Cobbled this together in a couple of minutes so promise not to look at the geometry up close
My WEN drill press column is 48mm, so a new clamp was needed. While I was at it, I beefed up the adapter holder. I also made an open-ended shroud. Hope these help someone.
The available rings for those ~250mm spools don't fit my printer's bed, so made this segmented version. Have to print 3 for each side (3 fit on the bed of my Anet A8 in one go as per photos) and then clip them into the spool. I used some…
I modified it to fit in the small carrier the crabs came and split it into fresh/salt water.
Now that the Core One can use MMU3, it needs more space in the buffer because of the increased size of the PTFE tube. So, to maximize the space in the buffer and minimize issues (filament pushback), i remixed the segmenter by adding 1cm…
This model is a remix of the MMU3 buffer segmenter part for use specifically with the large capacity buffer model. I designed this so that it is easier to print face down with fewer supports and improved the quality of the text. Although…
A super simple fidget that you can play with forever. It is made with small pieces which snap together and apart , rotate in different angles and the segments can be can be connected to make it as long as desired . Print settings: Layer…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This connector allows you to use the segmented pipes / tubes for the poop shute on the Creality K2 Plus wich has the Heat Recirc mod installed wich you can download here:…
A segmented human skull. From a real CT-scan of a man. He had cancer and a really bad accident
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a spool for filament samples that are too large to print out of just loose coil, but too small to warrant a fully-sized or even quarter-sized spool. The spool is made of segments, so you can stack as many of them as you need. You…
Design It's very difficult to get a Dew Shield for an 300 mm Newton Telescope (Skywatcher 300 PDS). But printing it is also not possible for much people because it would demand a 3D-Printer with a printable area of 400x400 mm. Therefore I…
If like me, you want to use the CoreOne MMU3 Lite mod you will very quickly realize that the buffer is not larger enough for the original PTFE tube that came with the bare CoreOne (610mm while the MMU3 Lite version uses a 450mm tube). To…
A low, contoured wrist rest that sits flush against the front of an MX Keys or MX Keys Mini. It crests about 28 mm out from the keyboard and slopes away toward you, so the heel of your palm is supported without the front edge pressing…
Modern lion wall art designed as a large modular panel. This geometric segmented design creates a bold and clean visual, perfect for contemporary interiors. The full assembled size is approximately 74 cm x 64 cm , but the model is…
Remix of the original model to work with rectangular magnets 9.5x19.5x1.6 that can be purchased on Amazon. I put some glue attack and pressed with pliers. It works perfectly and is specially designed to work with ams Hubs. Special thanks…
Segmented Ring Coaster Set with Holder – Tech-Inspired Circular Design A sleek set of 3D printed coasters featuring a segmented ring pattern arranged in clean concentric circles. This modern design combines symmetry with a tech-inspired…
These files are part of my xBuddy cooling chimney: https://www.printables.com/model/1147850-xbuddy-cooling-chimney. In addition you also need to download @teslapunk's “link” and print it three times:…
