8,135 models
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Updates 01-03-2023: Uploaded a new redesign. 06-12-2021: Fixed mesh issue with Basin_3x1, updated Basin_3x1.stl. 20-07-2021: Fixed the sizes of BasinCover_3x3, 3x1 and 1x3, small fix parametric parameter. 06-07-2021: Added extra drainage…
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Details This is a device to get a centered marking, regardless of the width of whatever you want to mark. It works by placing the stopper on either side of the beam, bar, etc. and twisting the device until both stoppers touch the sides.…
V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…
EDIT 6/8/2020 - Added my S3D FFF configuration in the Files section in case anyone wants to download it Gcode to print a 3DBenchy sliced in S3D Chris Elkin profile with retraction changed to 6mm @ 60mm/s Honeycomb infill 20% Jerk 10,…
STYR-01 is a compact and charming rolling robot that fits in the palm of your hand. It features a passive stabilization system using an internal counterweight. Thanks to this mechanism, its head always remains upright while rolling,…
If you like this design, check out some of my other designs like this one. What Files to Download Chose a model based on the pictures below Single Swipe: Double Swipe: Double Swipe Curved: Also available is the Self Watering Insert: Print…
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
A truly extraordinary decorative object. A moon with a small bowl attached for flowers and decorations. Standard size: 230x230x90mm. Easily scalable smaller or larger if required. A truly extraordinary decorative object. A moon with a…
9/22 update - added the XL & XXL Sizes Watch out YouTube video on how we made this! CLICK HERE FOR ASSEMBLY INSTRUCTIONS AND MORE DETAILS
Check out the new motorized version ! I made this carousel to organize the myriad of small parts and fasteners I've accumulated on my workbench. It can either be wall mounted via a French Cleat or set on a workbench. It's compatible with…
The Self Defense Knuckle Spike is an ergonomic self-defense tool designed for both striking and stabbing. Crafted to provide versatile protection in perilous situations, this tool enables effective defense against assailants. With its…
Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…
The original model had supports within the model data. I removed them and cleaned up the surface afterwards, so you can generate your own support by your slicer in the way you think the supports work best. Don't try to print it without…
Rose – Paint-It-Yourself Figurine A blank, matte-white model of a classic rose, designed for personal painting and decoration. This DIY collectible blends timeless elegance with a minimal, smooth form—perfect for creative projects, gifts,…
Soap bar holder that drains on its own
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
The source marked this model as adult content.
Introduction The design was inspired by all kind of different self watering pots I found, trying to combine them into the best solution possible. A special mention goes to Prusament for their “ PLA Recycled Self-watering Pot ” design.…
GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…
Low Poly Jack Russel Terrier sculpture. Print at least with 10% infill. This model requires supports. COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA Check out our other models . Your likes and downloads support more content. Happy…
Modern designed self watering succulent planter with water chamber. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion…
Verleihen Sie Ihrem Indoor-Garten mit dem Moosstab-Set eine elegante und präzise Lösung zur Verbesserung des Wachstums und der Präsentation von Kletterpflanzen. Das umfassende Set enthält einen sorgfältig gestalteten Moosstab – Dieses…
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Squid Game - Osselet Set [Updated] Ready to Print Squid Game-Inspired Jacks Game (Osselet) from Netflix Dive into the thrilling world of Squid Game with our unique jacks game! Inspired by the intense challenges of the hit series, this…
Stärke: 6mm Gedruckt auf Prusa MK4 Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: 15%
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
Original part : https://www.thingiverse.com/thing:4946522/files Enjoy
🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…
Details This is a device to get a centered hole, regardless of the width of whatever you want to drill into. It works by placing the stopper on either side of the beam, bar, etc. and twisting the device until both stoppers touch the…
a 50x60x100mm Low Poly Wolf *Free to Sell*
Electric Cable Diameter 2mm -> 6mm, mounted using double sided tape The STL files are scalable
3D-printable clip-on clamp to quickly mount and tension backdrops & greenscreens on a cameraset without damaging the material! Can also be used for tarps, banners, mesh screens, shade cloths, camping covers, towels, etcetera to the ground…
Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…
Self watering bulb for planters. Just fill it with water and stick in soil. Comes in 100ml, 200ml and 300 ml versions If the bulb is getting empty too soon for your liking, try covering the opening with a bit of soil and then sticking it…
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Print Instructions Filament: PLA or PETG Supports: None! All my designs are created to 3d print without support. Perimeters: 3-4 (to achieve watertight seal) Layer Height: 0.15-0.3mm And finally …. share a picture of your print in the…
The source marked this model as adult content.
Hello Guys, It's been a while...I've done this project couple of weeks ago, but wanted to create an youtube video on haw to build it, but still didn't got the time. Anyway, I'm publishing it and will add the assembly video and the…
Various designs for XT30 connectors Here you will find my designs for the XT60 size and MR30-M . News 12.03.25 Step files available 22.11.23 added design of angled and round mounting bracket 02.11.23 added design of standard mounting…
Prints in place, it has a hole in the bottom for an LED tea light, should hold in place by friction. I recommend printing with 4 walls (so the lithophane part is solid) and drop the model 2 mm below the build plate for a flatter bottom…
2x2 version of Zack's nipper holder with the angle of the holders tweaked so they fit inside a 2x2 square. If you have long tools they will still stick out of the 2x2 area but not nearly as much as in the original (which works better in…
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
Rescale this model as needed, I made the walls a little bit thicker than needed in the default scale, so unless you scale it to be very small, it should still get at least 1-2 perimeters. Check the preview after scaling! If you change the…
Back Story Of This Design: I wanted to push my skills with 3D modelling and put my green thumb to use so I decided this would be a great place to start on expanding my skills at making nicer looking models in CAD. This planter is designed…
this is a model of a pentagon fidget . it collapses and twists and you can sell it !! it has 1.2 mm thick walls with gaps of 1mm. use / sell responsibly
Introducing the first design from Parallel Goods. This Self-Watering Planter is exactly the growing environment your plants need, while giving you flexibility in your watering routine. It’s super easy to use: just plant your favorite herb…
All in one: Vier Varianten meiner Industrieschlüssel - immer griffbereit Vierkant: Durchmesser ca. 6mm; Kantenlänge: 8mm Dreikant: Durchmesser ca. 6mm; Kantenlänge: 8mm Schaltschrank (ohne Mittenloch): Durchmesser ca. 8mm; Seitenkanten…
Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 26 March 2023…
Print in place folding display stand easel Files include the solid display stand, a thinner model, and one with a 2 sided honeycomb pattern good for color change. The stands can be folded flat in half when not in use. The solid and hex…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
BMW Schlüsselanhänger mit E30, E36, E46, E90, E34, E91
Simple self watering plat pot with floating water level indicator. Inner pot diameter: 8 cm. The reservoir is designed to hold approximately 100ml of water. It is possible, though not recommended, to fill a bit more. When using an…
Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…
A blank, matte-white model inspired by the timeless art of bonsai. This DIY collectible distills the quiet beauty and meditative balance of miniature trees into a smooth, minimal form—perfect for slow, intentional painting and peaceful…
A Detailed Parts List can be found in the description of the YouTube Video below: This robot does not require any supports to be printed. Designed by Kelton Serra (Build Some Stuff) in Fusion360.
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
A beautiful design plant pot with self-watering. Simply add the water to the reservoir and the plants will take care of themselves. There are holes in the storage compartment that allow water to flow into both planting chambers. 🚀 Support…
Heizkörper Entlüftungs-Schlüssel Da hier viele bei den Kommentaren angegeben haben das sie mit 110% gedruckt haben, hab ich nochmal nachgemessen. Die 4kt Vertiefung hat genau 5,0 x 5,0 mm Eine Neuauflage mit 110% (5,5 mm) findet Ihr hier:…
Overview This is a filament pelletizer which converts old or unwanted filament into short pellets. It aims to be safe, tidy and easy to use. My favourite feature is the self feeding mechanism that is geared from the power drill input. To…
Turning the knob makes the content of bottle came out in controlled portions. Possible uses: Sugar, Coffee, Tea, Condiments, Powders, etc. … Important Printing Settings and others Print at 0.2mm, no support needed but uncheck PrusaSlicer…
A self-defense keychain inspired in the cats of sailor moon. Easy, fast and useful print (tbh you never want to use it, but it's good to have the power of the moon at your side) Also, you can change color at the moon layer to make it look…
Have you ever been to Wallmart searching for that perfect wedding sign holder, but nothing seemed to fit? Well search no longer! Here is the perfect fit for any of your wedding sign needs! Wether it be the guest book, table placments, or…
A switch cart holder that as you spin it, the games will pop up to make it easier to read and pull them out. I recommend printing the base in 0.12 layer height so that the ramp is as smooth as possible. A 608 skateboard bearing is…
Info: inspired by great gyroscopic model from @phi.gl for stroller, I wanted to have it in the car :) Thanks for originil print! I used this ventilation connector shape from print by @icepick Designs (thank you too) I designed car vent…
This is a print in place picture easel and plate stand. It is 180mm tall so it works really well for 5x7 photos and smaller. I recommend printing in .2mm so the hinges will print in place. Check out my YouTube channel for more maker…
Escher's Birds and Fish. I created this in 2016 because I just had to have a bas relief of this work on my wall. My final mural is about 180cm (71 inches) wide, and was created by taking silicone molds of each of the four pieces printed…
Please note that the license for this print is for the layer-change G-code only. The Roses of Unicofil flower used as an example remains “Attribution-NoDerivatives” and is itself unmodified in this print. By dynamically adjusting the…
Just "discolored" remix with added brim on selected areas
Now you can get the Gridfinity Carousel with 100% more motors and gears! The design is based on the Bookwheel mechanism by Agostino Ramelli. The Carousel has a total of 50 Gridfinity squares and can fit bins up to 7 units tall (49 mm),…
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
Sea Otter – Paint-It-Yourself Figurine A blank, matte-white model inspired by the playful and peaceful sea otter. This DIY collectible captures its floating charm in a smooth, minimal form—perfect for creative painting and fans of…
Buddha – Paint-It-Yourself Figurine A blank, matte-white model inspired by the serene presence of Buddha, designed in a calm, minimal form for mindful painting. This DIY collectible invites peaceful reflection and creative…
Let me introduce my new 3D-printable tool, designed to guarantee you maximum precision when centering holes and drawing guidelines on the thickness of any panel! This tool is the ideal companion for woodworkers, hobbyists, and makers.…
The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D Mainly designed for instax film but fits also other pictures. 🛠 Suggested…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
This is another cool looking groot planter version, which is a self-watering planter, so that you don’t have to care on watering your plant (you should print it with a size which enables bigger plants to grow in the pot!) Instructions:…
A blank, matte-white model of a serene lotus flower, ready for your artistic touch. This DIY collectible captures the spirit of purity, calm, and beauty in a soft, minimal form—perfect for creative painting and peaceful decor.
I am in the process of designing/building a spare room model railroad and one of the key features I needed was a drop-down bridge to span across the entry to facilitate a loop layout. My design criteria were: 27" opening, prototypically…
Owl Vessel Print with at least 4 perimeters if it is going to hold water. I would also anneal it in a pre-heated oven at 120 or so for about an hour. Added owlvase2 (2/10/10) there was a tiny hole in the bottom of removed model.
A blank, matte-white model of a cheerful sunflower, ready for your colors. This DIY collectible captures the bright, simple beauty of nature in a smooth, minimal form—perfect for adding a touch of creativity and warmth to any space.
Self-balancing bat, print in place and optionally glue the teeth on (as far forward as possible); have also uploaded a single tooth if you would like the bat to spin. Also included a version with a hole to hang the bat, should balance on…
Introduction I started designing my own self watering pot as I found all the other ones out there didn't fit my needs and, safe to say, I got a little carried away. So here is my collection of self watering pots with many different…
Kleiner Schlüsselanhänger im Trecker Design. Es gibt zwei Varianten. Bei der ersten sind die Kotflügel und Motorhaube höher als der Rest, bei der zweiten sind die Räder höher. Das Modell ist etwa 3,5 x 3 x 0,5 cm groß. Meine Modelle…
A self watering pot in a space-efficient, awesome square shape. 120x120x150mm (4.7x4.7x5.9'') external. Scaling it down will work, since wall thicknesses are 2mm - Upper, 2.5mm - Lower. Just be sure that it has at least two perimeters. A…
Thingverse reupload of metabolit "plant pot self watering - Blumentopf" https://www.thingiverse.com/thing:3745796/files NOT ORIGINAL MAKER
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
Here you will find my designs for the XT30 size and MR30-M . News: 12.03.2025 STEP files available XT60 Male vertikal/ horizontal mount simple and slim design suitable for a wide range of applications To additionally secure the plug in…
UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…
Can be used to start growing basil and chili and other plants which need a lot of water at the start. When reloading a bottle make sure you are quick - it will be sealed quickly (a solution will be added soon - check out Update 1) Print…
I remodeled these to use Black Light strips. Use black light strips and barrel plugs with a power supply. I glue the barrel plug in the bottom with a black light strip randomly shoved inside. The black light strip superpowers the glow in…
A blank, matte-white model inspired by the genius of Albert Einstein. This DIY collectible captures his iconic spirit of curiosity and imagination in a clean, minimal form—perfect for fans of science, creativity, and invention.
Introducing a innovative self-watering planter with a clay texture, featuring a detachable stand and designed to be printed without supports . This planter includes a convenient sleeve valve that regulates the water intake for your plant.…
A Self-defense keychain. Just a Info, this could be illegal to carry in some jurisdictions in the World. Check your loc
Very detailed model, can be printed at 200-300%. Tree Supports - Ensure object xy distance is >1mm from the model. Unfortunately my tree supports were to close to the necklace and I accidentally pulled it off. Brim - Suggested only for…
![Squid Game Gonggi - Korean Jacks - Osselet Set (Jacks Game) [Updated]](https://media.printables.com/media/prints/1123432/images/8479780_aec8d906-b096-4e90-bd50-58292bb4f8b6_f838fc03-0805-4fb2-898a-edf94517cb3f/screenshot-2024-12-27-221040.png)
