Counting matching models…
Tanos BasePlate Printed with Aurarum Black Petg Set Skirt to 0. Recommended printing with a .8mm Nozzle at .4mm layer height ([email protected] is great but time consuming) May add Parametric .FCStd if enough interest.
I used Tinkercad to add three magnet wells on the bottom of the puddle jumper and add extra support for the front magnet. Now as a fridge magnet, notes can be affixed to your fridge or message board.
Its a small C4, it needs to be painted. The G-codes are for a Ender 3 Pro.
20 Tabletthalter Für Schnapsgläser Serviertablett ca. 24 cm lang, 19 cm breit, 3 cm dick, Loch: 3.8 cm. Bitte beachten Sie, dass der Bodendurchmesser des im Halter platzierten Glasbechers weniger als 3.8 cm betragen muss Mehrzweck – Das…
Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…
Es einfach zu drucken, ich gebe auch auch noch eine g-code Datei für Pla mit Stützen mit.
Decorate the frames of your doors
CSGO case that can store the 3d glock popular prop!!! I suggest printing it in 0.30mm . 10% infill to save filament. Can store other things! Its a great storage for all Counter-Strike players and gamblers ;) Can be used as a gift box for…
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
Nur noch ein Arm. Seht euch auch Typ1 und Typ2 an.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Gobble up some Thanksgiving fun with this 3D printed turkey model! Perfect for your holiday table or seasonal decor, this little turkey is…
Stargate SG1 REPLICATOR from serial stargate
The hole on the gear is designed to fit the SG90 horn after trimming it so that only the circular portion remains. If needed, you can apply a small amount of super glue between the horn and the gear for a more secure fit.
Case for Wemos 18650 charge circuit shield (link below). https://www.aliexpress.com/item/4000957793394.html I used Mrlnka's "Wemos 18650 Charge Shield / Holder Dimension Model" to design this case.…
I designed some Adapters to fit SC and LC Fiber Plugs on a Visual Fault Locator from Wish WARNING! don't use Pressure on screwing the Adaptors on the Laser. You can Brake your Laser Diod!!!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Board models for: BME680 SHT31/SHT41 SGP30 Category: Models
Bow before your god! (Or at least, your 3D printer). Bring the menace of the System Lords straight to your print bed with this highly detailed, 3D-printable Goa'uld symbiote. Whether you are a loyal Jaffa, a disguised Tok'ra, or just an…
This is my version on a Ubiquiti rack solution, it mounts a 3P USG with the Gen 2 Cloud Key with allowance for a network port on the front, and lastly a Raspberry Pi. Printed in 3 parts and slid together using a dovetail style connection…
Printed in PLA, 0.16 mm Layer, Filament Change in Layer 8 and 11.
Remixed Model with simple Stand to hold a filled TE-SG
Servohalter SG90 mit Clickdeckel. Seht euch auch Typ2 und Typ3 an.
A stylized low poly 3D model of a Thanksgiving cornucopia, featuring clean polygonal geometry and smooth faceted forms. The model depicts a traditional horn of plenty filled with fruits and vegetables, blending festive abundance with a…
Easy to print. No supports needed but you might need a brim (depends on your printer). You probably need to turn the models in your slicer in order to print with no supports!
Hausmodell "Struckmannshaus" (Maßstabsgetreu) - Auch als Vorlage für ihr echtes Haus aus den Gebäudedrucker Dieses Hausmodell stellt das Haus dar wo ich von 2002 bis 2014 lebte. Dies Bauwerk ist mein wahres Zuhause und beherbergt viele…
model for designing, not printing(you can if you want to) tolerance +-0,5mm
Servohalter SG90 Clickbefestigung mit Clickdeckel Seht euch auch Typ1 und Typ3 an.
RIS rail 91mm that i made for personal purposes.
This is a 3D Model of a Marker that will perfectly fit a Puffco Plus Portable Dab Nail. Its not a very good disguise so I would not condone using this to smuggle the pen into places it shouldn't be, however, it does do a good job at…
Systainer3 Box to Sortainer adaptor, You will need to print two(one as mirror image on Y axis). Both adaptors will "bookmark" to fill one end of the tool box top, with room left for one standard 60x120box.
Here are grips for your ASG CZ 75 D Compact. There are three models : a grip similar to the original, with the same thickness ; a thin grip (-3 mm for each grip) with a honeycomb pattern ; a thin grip without pattern. The thin honeycomb…
M12 Spacers Inner Diameter: 12.1 mm Outer Diameter: 25.1 mm Heights: 2 mm / 4 mm / 6 mm / 8 mm / 10 mm Generated with the <BRB> Shape Generator | BSG v10
a little box for the sgp30 co2 sensor
Thanksgiving cookie cutter. The cookie cutter should be well floured and the dough should ideally be rolled out to 4 mm.
Zusatzkühlung Deye Hybridwechselrichter SUN-5/6/8/10/12/15/20/25K-SG01HP3-EU-AM2
Custom protective case designed for the TP-Link switch model TL-SG108PE , an 8-port Gigabit Easy Smart Switch with 4 PoE+ (Power over Ethernet) ports. This case was engineered with the following features: Proper ventilation : multiple…
Nur ein Arm. Seht euch auch Typ1 und Typ2 an. mit Clipbefestigung Orca Slicer mit 0.08 Höhe
I was asked to make the E5 Rank and here it is.
New and improved replacement for Parkside x20V Rivet Gun. It's a tiny bit larger but much more impact resistant than the original. It is very solid and I reccommend printing it in clear PETG or some sort of fiber reinforced filament, so…
Vnútorná súčiastka do airsoftového granátu značky asg storm 360
Nikon F & F2 Reparatur ausgerissener Gewindering für die Augenkorrektur Linse. An manchen Suchern für die Nikon F oder F2 ist das Gewinde aus dem Suchergehäuse ausgerissen. Der Reparatursatz besteht aus einem Dorn mit Gewinde zur Aufnahme…
I needed to mount my switch in my 10 inch rack and could not find any brackets for it so I made these. Could be used for other equipment.
ASG magnifier red dot protector . I added plexiglas
fall/Halloween themed desktop mini golf novelty gift
Using parts of MiniMarti’s organiser ( https://www.thingiverse.com/thing:5135839 ), which looked great but I wanted something that would work for vertical storage. Print one of each file. Bits tray lifts out for use in play, and the…
Da alle Terrassen ein Gefälle haben damit dass Wasser ablaufen kann, steht der Grill natürlich schief. Dafür habe ich einen Standfuß gemacht, damit der Grill wieder in Waage steht. Mit Löchern, damit das Wasser ablaufen kann und einer…
cool text based on for csgo players and fans
Muttertags Geschenk für den 10 Mai mit Schrift und Sterne
Thanksgiving Gather Sign. Run a string from one hole to the other and hang from the string in the middle.
This is my Maker Chip the front has my minecraft skin, and the back has my qr code.
Just print without supports, use bridging. 0.2mm PLA or PETG transparent. Fill it with your GBB 6mm shake and fill your magazine in just a second.
can be used to atach things to a SG90 servo horn
I made this because i needed to have some reference when designing mount for it. Tinkercad
cool text based on for csgo players and fans
Nachdem das Abflussgitter gebrochen war habe ich es etwas dicker nachgezeichnet. Passend für 175mm Abfluss
For the version with detachable grips you will need magnets (5x3). I haven't printed it myself yet so let me know if there is anything to improve.
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
Use the screw that comes with the SG90 to atach to the servo
Immer wenn ich ein originelles Modell zu Helloween suchte, fand ich zwar Modelle von Geistern und Kürbissen. Aber davon hat man irgendwann genügend rumstehen. Daher machte ich aus zwei Modellen eins: den Kürbisgeist von Helloween. Das…
Remix of Andy Forsberg's fantastic fish feeder for a classroom deployment. Due to the little fingers and general clumsiness inherent to the primary classroom environment, I figured some slight tweaks were necessary my wish list came down…
For installing the remote bass knob from Rockford Fosgate (only tested for PLC-1) to your car with double sided tape (2cm) Print with (tree) supports as is. German: Zum Einbauen des Remote-Bassreglers von Rockford Fosgate im Auto mit…
Longer, Taller , added feet, broken into smaller pieces for easier printing. Some original added parts. used super a glue to hold together. used OnShape and link below for those interested.…
Helps you disguise your obvious gifts so you can surprise your friends and family. It helps create a box without using lots of filament and it can easily be reused. The box creates a conventional wrapping experience. Makes it easier to…
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
Model of non-rotating Stargate simplified for this scale and separated chevrons. Stargate - Diameter 203 mm It contains two parts which I recommend glue together with superglue. You can also use three dowels for better aligning (adjust…
Some valve caps for vehicles, I made these with 0,2mm nozzle. This far: tesla, f150, bmw, toyota, yamaha, gasgas, will add more later.
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the SGC…
Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.
Zusatzkühlung Deye Hybridwechselrichter SUN-5/6/8/10/12/15/20/25K-SG01HP3-EU-AM2
Angegeben ist das Lochmaß in der Breite. Die meisten sind 2 Teilig! Also drauf achten das ihr links und rechts mit gleicher größe nehmt. Ich habe sie mit ganz dünnen Doppelseitigen Klebeband eingesetzt. Beim Drucken die Gitter Auf der…
***UPDATE*** Modified geometry to make it print easier. Added a variant for the up and comming HK33. Use TPU for best performance. Also fits HK33, HK53 and PSG-1. I included models for all variants plus HK51 & HK21. (In case you are brave…
Halterungen um den 5-Punkt-Sicherheitsgurt von Stokke am Tripp Trapp befestigen zu können. Montage erfolgt wie beim Original. Wurde 3D-Druck-freundlich konstruiert: Möglichst wenig Überhänge und integrierte Supports. Gedruckt mit vier Top…
I did this to mount a switch under a table. I recommend printing as shown in the picture (the .3mf file is exactly the same) to minimize the risk of layers peeling off from each other during screwing down.
A very simple yet functional stand for the ASG UrbanSniper/MB-06
100x160mm sign, with art of a pumpkin, turkey, and family; reading “Happy Thanksgiving” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit…
Handy Halterung mit Ausgang für Ladekabel. Knickt das Kabel beim Laden nicht ab.
Puffy and simple in appearance models of a turkey, chicken, and duck. All tasty birds for a thanksgiving day feast. Printing tips: Some supports are needed especially for the underbellies and beaks. I recommend tree supports. They can be…
I found Andrew's design quite useful as it rigidly fixates the switch, even when (un-)plugging ethernet cables. The present design has openings for better ventilation, since the original design was blocking the vent holes present in my…
A 7-inch Rack Mount for the TP-Link SG1005P | SG105(E) | OC200 series. This model is compatible with the GeekPi RackMate TT (Affiliated link). This model is part of a series of 7-inch rack mounts I've designed. You can check out the…
My new TL-SG105 doesn't fit the original mount downloaded here. Vendor design changes perhaps? The original mount peg positions are 14.33mm too far from the tab border and are also too big to get through the “+” holes on the switch. What…
Fits that specific model, but may be tweaked for other models as needed via the main files.
white until 5.6mm red until 6.1mm gold until 6.6mm finish with dark blue
I couldn't find a 10" rack mount for a SG2210P which was designed for the ports facing forward. This model has a gate at the back (press in using the bar closest to the "teeth") to stop the switch sliding rearward when you plug in network…
Für Schäfte von 4,5 bis 8mm Außendurchmesser Man benötigt die base, eine cap mit dem Außendurchmesser des Schafts (nächste Größe) und drei Inserts mit dem gewünschten Winkel (0°, 1°, 1,5° oder 2°) Der Bajonettverschluss funktioniert am…
Hello all, here is my version of a holiday gnome in a Christmas tree disguise. It can be printed as a Christmas decoration. Hope you like it ;o). Have a nice day !
Un accessoire stylé pour les fans du Paris Saint-Germain et les amateurs de streetwear ! Ce porte-clé circulaire fusionne le prestige du PSG avec l’iconique logo Jordan, pour un look à la fois sportif et urbain. ✨ Détails du modèle :…
I built this for the novritsch SSG10 but I'm pretty sure it will work on other VSR10 platforms. (let me know if not) It's worked for me for a while with me running an HPA setup. I don't know how it will run with a regular spring setup.…
Parc des princes - PSG Ce modèle est gratuit pour un usage personnel. Si vous aimez mon travail et souhaitez me soutenir, vous pouvez m'offrir un café via le lien sur mon profil ou directement avec PayPal : https://paypal.me/jobejp Merci !
