Counting matching models…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…
Simple brackets, takes 4 screws. Mounts the switch upside down and leaves some air through for cooling. Updated with V2 for a nicer printing result, without the elephant's foot through the rounded bracket. It's angled now.
Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.
just removed the front logo because I could not get it to print cleanly.
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
A bracket to mount the TP-Link TP-SG108 switch under a table or desk. Use 4 x #8 wood screws. Switch is held into place using bumps on the bracket that fit into the existing switch mounting slots.
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…
A 10-inch rack mount for the TP-Link TL-SG108S-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Do you like my models?…
There are other suitable designs for TP-Link SG108, but I didn't like them; I designed one in which you can easily slide the switch inside the rackmount. The hooks in the middle tightly fit with the body of the device, and it keeps it in…
The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…
rotated the honeycomb pattern to make it easier to print
Simple bracket to mount a network switch to a wall or other surface. print 2 brackets, one for front, one for rear. I used #6 screws to mount. Designed in Fusion, parametric model is attached for easy editing to fit your router/switch.
10" Rack Mount Solution (1U) for a TP-Link TL-SG108PE Switch. You can use double-sided tape to secure the power brick in place and zip ties to manage the power cord. The screw holes are designed for M5 screws Dimensions ( in mm ): W=254 x…
This is a remix of https://www.thingiverse.com/thing:3089825 with the following improvement: improve lan clip accessibility by changing the switch mount position reduce the mount width from 12 to 10mm slightly adjusted dimensions for a…
Designed this to mount the TP-Link TL-SG108-M2 in a 10-inch rack. The switch doesn’t fit through the front opening but fits inside, so I made this custom shelf to hold it securely. Printed with - PETG If this print helped you out,…
TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.
3D model for 3D printing designed to mount a TP-Link TL-SG108E switch into a 10-inch rack. The switch is inserted without its original metal case – only the bare circuit board is used. You will need m3 inserts. Print withou supports.
To secure the switch, insert into the rack mount, Then insert the small side into the switch slot and slide the large side (with the flat side toward the back of the switch) onto the raised area on the mount to lock it into place.
A simple mini rack slot in for TL-SG108E TP Link switch
TP-Link TL-SG108 Network Switch mount compatible for mount into an IKEA pax cabinet hardware needed: 2x heat set insert M4 (length: 8,1mm) - i used the one from Ruthex 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (IKEA)
I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…
---> English Lab Rax - 10" - 1U - TP-Link_TL-SG108E: TP-Link_TL-SG108E 10" 1U Mount with lid. 2x M3 heat inserts + 2x M3x6mm needed. I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U - TP-Link_TL-SG108E:…
A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…
Small switch stand designed to work with TPLink SG108E, 8-port switch, but should work with any switch that is 158mm wide which I believe a lot of 5 and 8 port switches are; just double check yours. The bottom cable ties allow for your…
This is a 1U mount for the TP-Link TL-SG108 8 port switch, but I suppose it will hold anything that fits this opening. Dimensions ( W x D x H ) 6.2 × 4.0 × 1.0 in (158 × 101 × 25 mm) The idea is the pins hold the wings in place as well as…
Remixed this to make it fit a 19" Rack, adapted mount from @Mauker you can use the mounts side by side, ore use some of @Mauker's modular Parts 3x M5 screws 3x M5 hex nuts. Thx LikeAZanda @Mauker
Adaptation of the original print for a TP-Link SG108PE v2
A remix of an already good model. Changes. 1. Adjusted the height on the inside as my switch was 25.8mm high. 2. Added radius on the ventilation slots on the side to reduce the bridge when printing it standing on the front. 3. Added…
I recently purchased a tp-link multigig switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting. The bracket is split into to halves to be…
collection https://www.printables.com/@yahbluez/collections/518691 Needed an under shelf mount for this small switch… …used FreeCAD to make one. (Feel free to use the included CAD file to make and sell your own. licence: GPL v3) Picture…
Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…
This is just a simple wall mount/shelf for the Mini server rack for TP Link TL-SG108 and Raspberry Pi model to sit on. That model can be found here . I printed with 25% infill in PLA and seems to be plenty sturdy. I made it more on the…
This model is used to combine a TP link switch with a part of this (amazon) or this (aliexpress) 24 port patch panel. After receiving the patch panel I noticed it consisted of three 8 port parts. I already had the TP link switches and…
A custom-designed wall or desk mount holder for the TP-LINK TL-SG108E 8-Port Gigabit Switch. This holder securely fits the device, ensuring stable placement and easy access to ports and LEDs. Ideal for organizing your networking setup at…
A simple way to attach your tp-link TL-SG108S Switch to the IKEA SKADIS peg board. Based on cloudybasements design.
1U Mounting panel for a TP-Link TL-SG108 to match the Modular 10" inch server rack project
Remix to accomodate TP-Link TL-SG108 (had de 94mm verison) a rasberry pi 3B+ with heatsink and my ISP ONU model AN5506-01-A1. The parts that are different from original are in Gray. Both of them connect with the LEFT TP-Link TL-SG108…
I made this to be able to mount my switch upside down to save space. It snaps on from the side and is then held by the rubber feet and friction. If you remove the rubber feet from the switch it could also just slide in and hold by…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link Switch TL-SG108 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
This 3D printable holder is custom-designed for the TP-Link TL-SG108PE 8-Port Gigabit Desktop Switch , ensuring a perfect and secure fit. It's ideal for mounting your switch on workbenches or mobile parts , helping to optimize space and…
Part Description ESRack Module for the TP-LINK TL-SG108E. The dimensions are slightly different from the SG108. Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket…
Remix off TL-SG108E holder by Jesse Schauer to fit TL-SG108 mounting holes instead.
This is just a simple remix of the patch panel for the Mini server rack for TP Link TL-SG108 and Raspberry Pi model to sit on. That model can be found here . I did not have slim keystones and they would not fit due to close spacing. I…
Decided to re-organize my network hardware by moving (most of) it into a 10 inch rack. After printing the parts for the rack itself (check this fantastic design by McBig ( https://www.printables.com/model/427461-10-inch-server-rack ) and…
Creator dimas_art has a very good looking TP-Link SG108E holder that I wanted to turn into a multiboard compatible mount. I took his model and remixed it to add two multiboard snaps. I suggest printing in the orientation shown in the…
10-inch rack mount for TP-SG108PE V2 switch https://www.tp-link.com/us/support/download/tl-sg108pe/v2/ Remixed version of " 10" Switch Rack Mount (TL-SG108PE)". That was suitable for V3 or V5 versions of this switch, but I have a V2…
Summary A small desktop server rack that's built around the TP-Link TLSG108 network switch. Includes an 8 port RJ45 patch panel, switch panel, and a raspberry pi (~3) panel. Most dimensions were based on a standardized server rack, with…
Tplink SG108 modular rack mount likely also fits netgear GS108 requires 1u rails, recommended to print with ASA https://www.printables.com/@LvL_Dani_470947/collections/2036642
I re-mixed this to 2/3U and added keystones to the both sides
You can find here 2 holes and 3 holes versions of the holder for TP-Link TL-SG108, 8port switch. I used PETG, 0.2mm with no issues. Enjoy
Custom protective case designed for the TP-Link switch model TL-SG108PE , an 8-port Gigabit Easy Smart Switch with 4 PoE+ (Power over Ethernet) ports. This case was engineered with the following features: Proper ventilation : multiple…
Has space to plug it in, just had this switch on hand and needed a mount for it. Used double sided tape for it, but could definitely use the screw mounts. If you want to add these pm me/comment and I can upload the .step
Remixed this to allow mounting of the TL-SG108S-M2 which has slightly different keyholes than the TL-SG108S
10" rack mount for tp-link TL-SG108PE and its power brick Printed with black PETG
un remix de Celeste's Panneau de montage en rack robuste 10" de Celeste V.2 pour TL-ER605 (-V*) et TL-SG108 (-E) endeux/
I needed a mount to attach to a steel cabinet and didn't want to drill holes. Requires: (4) 8mm x 2mm magnets [ https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html is what I had on-hand]
I needed a mounting solution for my TP-Link SG108PE since double sided tape wasn't cutting it. There is a mount for both the switch itself and the power brick. Simply use 4mm screws and install. You can use it both on the underside of a…
Used in my Home Lab video I wanted to use this model but I wanted to route the cables nicely, so I added a hole to allow the cable to be routed to the back ALL CREDIT GOES TO ORIGINAL CREATOR, THIS IS A QUICK REMIX TO ADD ONE THING!…
Improved Fusion360 file based on BryanPryor's design for a TP-link switch bracket Added: Easy recognizable parameters as favorites Fixed: bracing did not scale correctly when changing parameters
I remixed the model to work with my larger switch, a Raspberry Pi mount with included two keystone jacks, and a blank panel.
Rack mount for TL-SG108PE for 10'' rack
Remix of this model: Can now mount underdesk using openConnect
Simple Mount for the TL-SG108PE Power Brick. Fits 10 inch rack. Use a temperature resistant material like PETG.
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
A simple way to attach your tp-link TL-SG108S Switch to the IKEA SKADIS peg board. Based on cloudybasements design.
I remixed the model to work with my larger switch, a Raspberry Pi mount with included two keystone jacks, and a blank panel.
Used in my Home Lab video I wanted to use this model but I wanted to route the cables nicely, so I added a hole to allow the cable to be routed to the back ALL CREDIT GOES TO ORIGINAL CREATOR, THIS IS A QUICK REMIX TO ADD ONE THING!…
Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.
I wanted to mount my TL-SG108 Desktop switch under my desk to use the space better but the mounting channels are meant for walls. i designed these brackets to be as unobtrusive as possible and hold the switch securly upside down.
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
Print with the front down. No support needed. Connect the two pieces with 3 M5 screws and nuts.
Same as original you will need 3x m3 inserts Print without supports
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for TL-SG108(PE) / SF1006P This bracket is designed specifically for the TL-SG108(PE) / SF1006P switch, offering a clean and secure fit in your 10-inch…
I was tired of using double-sided tape and decided to use something more sturdy. That is why I created this rather simple design to firmly mount my TP-link switch to any surface that is screw-able. I know, I could've used the 2 hang slots…
Used in my Home Lab video I wanted to use this model but I wanted to route the cables nicely, so I added a hole to allow the cable to be routed to the back ALL CREDIT GOES TO ORIGINAL CREATOR, THIS IS A QUICK REMIX TO ADD ONE THING!…
Wallmount to mount two TP-Link TL-SG108 behind each other. Clamps perfectly when you apply the rubber feet to the top one of the switches.
I had some fun do design this one. This might be the reason why it looks a little “fussy” :) I love the voronoi style, not just because of the optics but also to save material at printing. Donations are welcome and helping to keep my work…
UPDATE 8/17/2026: I'm working on a more universal switch mount for these relay rack mounts. The idea is to have one mount that works for various switches that have a similar profile (160mm wide and approx 26.3mm tall). That would include…
This is a requested wing for a TP-Link SG108PE (POE) switch (I'm not sure if this is a V5, but I suspect it may be). I believe it has 98mm spacing between the screws, but I do not own this one, so cannot say for sure. Use this at your own…
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…
