Counting matching models…
Plastic is not very strong, but when it is attached, there is no leverage to break it, so it is secure enough. For printing use 100% infill and 0.1mm layer height. Numbers in model names are clearances. Cover part is designed to be…
A simple shackle for my Traxxas TRX-4M Defender bumpers. Printed in resin and painted. Paper clip can be used to be pressed in to fasten it to the bumpers. Drop of glue might be needed at the ends to secure the paper clip in (I did not…
Designed to be printed flat without support. Picture is with 6 strands of #275, 3/32" (2.3mm) paracord, but 4 strand of standard #550, 5/32" (4mm) should fit well too.
Modular 3D printable model set, which allows you to create authentic chains and shackles for hands, legs, and neck, perfect for a wide range of cosplay creations. Whether you're embodying a fantasy, sci-fi, or historical character, this…
Print in resin for the best results. I also suggest supporting it instead of printing it to the build plate. You will need to support the rafter tails and the inner rafters as well. Good luck.
This is a model timber building designed for 28mm wargaming, however it can be scaled so would be great on any type of scenery layout. I am creating many free models and also sell some more elaborate models on my website in my digital…
Inspired by @74TOFU's fursuit shackle prop, I created this model from scratch and added some improvements. Cuff diameter is 72mm. Measurements were made specifically to be worn over my fursuit arm paws. Prints with 0.2mm layers. Supports…
Inspired by the streets of Anandapur in Disney's Animal Kingdom at Walt Disney World, this shack usually marks the entrance to a harrowing trip through the Kali River Rapids. It has that amazing lived-in feel that the rest of the park has…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
I designed this nice remix for a project to lock a crate with a padlock or D/CLP-shackle. I added my source files (.ipt) so you can make adjustments if needed. The geared hinge is a print in place part only support needed for the cut-out.…
A set of inserts that can drop into the included tuck boxes, which will also function as holders for the resources etc. The main aim was retaining the original tuck boxes while at the same time increasing their strength, and making them…
This snap shackle is good for light duty rigging and can be scaled up in size. 200% was a useful working size for me. Materials: Printed parts Spring - The size depends on the width of the gate pin, the spring should slide onto the narrow…
This model is to represent a small out building that is under construction. It is printed with Prusament PLA. Print the structural elements in the color filament that represents new lumber. The roof rafters are simply glued at the roof…
A shackle mount for use with the original shackles that came with the TRX4 2021 Bronco. Simply remove the tube bumper part and mock winch, and bolt these on using M3x5mm button head screws. Interested in our RC crawler bodies and…
I didn't want to buy a whole set of shackles for the hook, so I just designed one to use with a M4 Screw. I printed it with PETG and 100% infill for extra strength, but you could definitely get away with using PLA. I used a M4x20 screw I…
Paracord bracelet shackle with a counter bore that retains the pin.
This is an insert for Shackleton Base. The personal Player insert was designed to fit Clownfeet's design of the 3D domes. His design can be found on Thingiverse or Makerworld (I painted his file and gave him credit). Clownfeet's 3D Domes…
This is a model timber building designed for 28mm wargaming, however it can be scaled so would be great on any type of scenery layout. I am creating many free models and also sell some more elaborate models on my website in my digital…
This 1/18 scale Guard Shack playset is one of the first things I designed. Fun little playset for G.I. Joes and other 4 inch action figures. Every military base playset needs a guard station right?
🦀 Crab Shack Fairy House – Undersea Magic with a Pinch of Whimsy! 🐚 Welcome to the seaside sanctuary where fairies vacation! The Crab Shack Fairy House is a delightful blend of coastal charm and fantasy fun, designed to look like a cozy…
I wanted to add a little pizzazz to my truck but did want to spend the money to add these shackles that might just get stolen! And the best part you can print in any color you like or to match your needs! DO NOT USE FOR ANYTHING BUT…
For those of us who remember Radio Shack growing up I wanted to make a logo to be a shelf or desk decoration as a reminder. It does not include any hangers, stands, or legs only the logo itself.
3/8" SCREW PIN ANCHOR SHACKLE
Update 17.07.2025: New Version added. Better printing gcode. Fits better. Original is broken. New Verion: Stronger and more aerodynamic. At least 4 layers above, below and walls. At least 25% infill. I put felt tape on the inside of the…
I have fond memories of what Radio Shack used to be as I was growing up. I spent a lot of my allowance and any other money I could earn on electronic parts, kits, tools, etc. I wanted a reminder of those days in my office so I created…
This is the knife Shaco uses in League of Legends. Print in two halves then glue together or you can print all together if your printer is big enough. I recommend scaling to 4000-5000 percent as the model is very small.
A small shackle with 3d printed locking pin and a smaller shackle. Bigger shackle has ID of 25mm and fits around a quarter. Reposition body to lay flat and print without support, loaded properly can hold over 100lbs at 20%infill in PLA.…
The model can be scaled up easily in your slicer. If you have some you can use gift ribbon to make tow straps.
This is a model of the abandoned house where the portal connects to from The Owl House. Length Width Height 36.4mm 34.3mm 35.1mm Print Instructions Printed at 0.1mm layer height. Does not need supports. If you want to support me, you can…
Ramshackle Dorm, once abandoned and haunted by ghosts, now inhabited by MC and Grim! Charms for Grim and an UNOFFICIAL design for the Main Character Models are 65mm in height. Scale them smaller for earrings or bracelet charms. Printed…
Do your friends drive Jeeps that haven't so much as seen a dirt road? Swap out their fancy recovery shackles with one of these! They'll never miss it! I suggest splitting the shackle into two pieces to print, and then gluing them back…
Video link Soft shackle rope pulley for up to 6mm rope This pulley was designed for low to medium operational loads, but will hold the rope up to the breaking strength of the soft shackle that was used in the assembly. Use 3mm dyneema…
I needed a quick release shackle to allow my students egg droppers to drop easily from a beam hanging from the ceiling. The latch can print with no supports or brim. The main body needs to be printed with supports everywhere (would block…
Working Shackle Hoist model with removable pin, created to aid in printer part design changes. Step file included
A shackle lock holder for Abus Granit XPlus 540 that mounts on the bottle mounts. 63mm between bottle mounts +/- 5mm. Fit is tight and avoids too much wiggling. Had great results printing: vertically supports only on the inside part using…
This compact shackle key is designed to help you securely tighten your shackle pin, ensuring it stays firmly in place and won’t loosen over time. Commonly used on sailing yachts to fasten rigging and secure equipment, it provides extra…
Krampus can holder Collection - Shackled Krampus Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim,…
A custom shackle bumper for Jeep Wranglers or Gladiators, with " 1941 " inlay. The main body should be printed using either Nylon, TPU or Onyx (nylon/carbon fiber) material. This will give you some flexibility to get the bumper around the…
This is a mounting plate for shackles and other accessories with a 10x10 mm bolt pattern. It reuses the original mount points of the Bamboo4x4 rear bumper pieces. Hex nut cutouts are for M2 nuts (4mm socket). I've printed the part with…
To build this hoist, you will need: 2x 14mm straight shackle 6m (or more) of 6mm rope 6 pulleys to be printed in a very strong filament, I used Iglidur C210 2 rope holder (optional, not on the image) 4 rubber band to close the rope…
Bring a little magic to your shelf or terrarium with this whimsical Witch’s Cottage. Featuring a tall, hat-shaped roof, arched doorway, star-window detail, chunky chimney, and cobblestone base, this miniature house looks like it popped…
Tackle to increase your lifting strength This tackle is designed with the idea that if the plastic parts break, you should not drop what is being lifted. And of course you can modifie my design easy by downloading *.3df file. Safety This…
For those of us who remember Radio Shack growing up I wanted to make a logo to be a shelf or desk decoration as a reminder. This logo is from the 1990's, it does not include any hangers, stands, or legs only the logo itself.
An upgraded, high-durability replacement shackle spline clip designed specifically for the Kryptonite Evolution Mini-5 U-lock. The stock aluminum spline connector is famously prone to loosening, causing the lock to vibrate loudly, rattle,…
Rim is designed for ABS Tire is designed for TPU. I printed mine with 5 outside layers and 30% fill (which was probably a bit excessive) 0.2mm layer height. Rim slides into tire with a bit of persuasion. Feel free to glue in place. These…
Replacement of the wooden tokens to indicate the standing rocks and shacks. Also included are disk and cubes, if you want to replace one of the light blue colors, which are hard to differentiate on the map. Sources for remix:…
No supports needed, just trim the tabs on the hitch plug when complete! This is not meant to be structural, but hey post up if you do some pull test with. Im guessing it wont be good due to layer line issues….
There are 2 types of chains. V1 and V2. The difference is the placement of the chains coming out of the cuff. It should fit most models. Printing: Print with 50+% infill so you don't break them. Print without supports, Brim is ok.
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
If you are using access to 3rd row only from right side of the car you can use step on the left side for this box. Store shackles, straps or other items here. Use velcro tape for attaching box into the place.
Did it from PETG. 02, 20% infill As this item should withstand marine environment I wish I could use Nylon instead.
The long pin… should be on an angle to hook the gate into the closed position like this one https://www.printables.com/model/193865-quick-release-snap-shackle I tried using a spring from a pen, where else can I find a spring easily?…
Shachihoko – Chibi YokaiZ Collection This model is part of the Chibi YokaiZ collection. Check out our growning collection on our Patreon! Optimized for resin printing, but also compatible with FDM printers. Most YokaiZ characters are…
Now, that’s an improvement. The low building gives you a solid base, but the two tiers mean you can spot trouble coming from miles away. That watchtower perch is key for your marksmen or for spotting any Glassen Wing Vultures circling in…
Battery Lid for the Honda CR250R Motocross Bike Featuring Ricky Carmichael RC Motorcycle RadioSack Model 60-4353 Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me…
Large dish for staring hermit crab shells to keep them from getting covered in sand. Approx. 220x127x51 Recommend using PETG due to the high humidity typically found in hermit crab tanks.
I just added the "Emergency Anchor Release" text deboss, and scaled down to 60%, identical otherwise to the original.
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168) The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the…
Fun little Dog Poo Bag Holder Prints easily in separate pieces and glues together Prints with no Supports, Just place logically on the print bed. I used small offcuts of filament to mount the shackles in the holders. It is a snug fit on…
Dimensions: 180 x 54 mm. Only one colour swap required! For those with BambuLab machines, the included 3mf file has an AMS colour swap included. If slicing yourself: 0.08 layer height recommended, will work with others when the swap is…
Increased spring shackles for WPL C94 UAZ-469. Also suitable for other WPL models. (SolidWorks 2020)
meant to secure a 2.5 - 3 inch diameter pipe or object using a carabiner and paracord to lock it down.
That's the sad end of a caravan. A Shard Shack that didn't make it, the wagon now permanently vitrified into the cracked, glowing glass. It’s a monument to the Sinking Sands. You see the little pieces of coin scattered around? The fool…
Got a Pinecil V2 recently but found that the RadioShack Soldering Iron Holder/Cleaner combo didn't fit the Pinecil, so I decided to create an end cap that's essentially the same design as the original but it's designed to fit the Pinecil…
A case to be used with the version of Kung Fu Flash cartridge found on retrohackshack.com/shop. It has been customized and improved over several other cases I have found online. The style of button was inspired by hackup version on…
Remixée pour l’utiliser comme urne lors de notre mariage sur le thème « tropical »
This is a shelf for displaying 4 RadioShack LCD games. It's around the same height as a CD jewel case or gameboy box. RadioShack-Cradle.stl - The part that holds the games. Print with 3 walls, 0.4mm wall thickness, no infill .…
3d printable sailing block/pulley Uses a soft-shackle and 6203 bearing My soft-shackles are 60cm of 2.5mm dyneema. Printed for testing in PLA and tested as shown in photos, I don't have any numbers on how much it can take but it was quite…
That's a Shard Shack. Not much to look at, but it's a testament to stubbornness. It's a home built out of the last salvageable corrugated iron and wood, a miserable fortress surrounded by the very Obsidian Shards that want to cut it down.…
Made the shackle holder have a weirdly specific twist in it (which I did backwards at first, hence the two different ones in the photo) so it'd hold the shackle to the leg of my rack (with the top of the lock held by its own mount).…
A fully printable pulley with an extra eyelet to add something else if needed.
The shackle holes are symmetrical 2.4mm and not threaded. I printed in PLA with 0.20mm layers and the screws threaded securely with no other preparation (I oriented them opposing directions for each side).
Small improvement over the first version. Note: not compatible with original.
For the Warn Epic Sidewinder shackler, you can purchase an Isolator to protect the pin from being damaged from rocks or other road debris. I was about to make one to 3d print and figured it would be nice to keep the OEM pin with my winch…
This model gives of a complete feel for the mysteries Gravity Falls holds...
Longer shackles for FMS Mashigan with leaf-springs kit. The way the leaf-springs are designed, you either end-up with a lowering kit if you go axle above or a high-heels kit with axle under ... Easiest way to correct the lowering kit is…
Fitted box for the PhysicsHack Vortex Dome: https://physicshack.com/product/vortex-dome/ Print instructions Print with PETG using Archimedean chords as top and bottom fill pattern, and no skirt as it barely fits on the i3 MK3S platform.
I really like the RadioShack branded soldering iron stand that I have. Unfortunately, the stand was designed to be used with a larger soldering iron and the TS100 that I have right now didn't fit well. I removed the plastic cup that the…
Overview I made this model when restoring my Radio Shack Red Arrow Buggy. All parts are hard to acquire for this old buggy. Tires wear out and replacements aren't available. Some people switch out the wheels for other more-common wheel…
This stunning miniature model captures the terrifying assassin in a menacing, ready-to-strike stance, wielding his signature jagged twin poison daggers. The figure features intricate sculptural details, including his sinister jester's hat…
Print two pieces, join with M2 bolt (and nut, if needed)
FS_Spacers should work on any Freckleshack style screen that does not use the PCB for locating the LCD within the shell. Specifically this means Freckleshack or the new backlight kit from China with the touch sensor backlight control.…
Sliced and diced the bottom and lid in 3D Builder to fit the Radio Shack 22-204 & 22-214 meters. Removed FLUKE logo. Used 4-40x1-¼ inch screws, Cases are PETG and latches are PLA.
Just print and hang on your wall for all your friends/neighbors to see.
The handle of my trusty Radioshack double-sided pick broke, again… I had already super-glued it a couple of times and this time it broke on the other side. It is still super useful, so I figured it was time for a new handle. Quick and…
As requested by a Reddit user. Work in progress!
Repair kit earphone shackle for Philips SBC HP200
100x160mm sign, reading "Visit the Shag Shack for Quick Trim and Longer Bangs" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
I picked up a Realistic (RadioShack) Stereo Mixer many many years ago. Unfortunately, what knobs did remain on it when I got it all broke pretty quickly. They're just quite brittle. Unfortunately, I have not been able to find any knobs…
The Shackle Box is designed to hold 2 shackles tightly to prevent road noise. Its designed to work with a Molle system. hand the box on the back of your Molle seat cover or a hard Molle panel. Keep your recovery gear organized with the…
thole is my project in which I will focus on parcord bracelets. Or rather accessories for making them
This hanging shackle bracket snaps onto Barrina T5 grow lights bars and adapts them to hook mounting. Uses M3x30 screw and locknut. PETG & stainless hardware recommended. Print with supports. Clip is fairly stiff and requires some force…
Spacers for Palm Centro, 685, 690 LCD, used by Freckleshack, Alioli and AIO (Chinese) kits for CGB, MGB and DMG. These spacers work for DMG only. Print them with your preferred material and settings and place them as shown in the photo.…
Our base unit thermometer that we have had for years broke the stand that keeps it upright. I designed a simple model with PLA I had around.
I upgraded my soldering station to a T12 station, so printed some updates to my 30+ year old Radio Shack soldering stand. I like the brass coiled sponges better than the wet sponges, so I designed a holder that would fit the recess in my…
This is the end of a carrying strap to accommodate a 3/16 in anchor shackle and a 2 inch wide Velcro strap. I made this to carry skis with a shoulder strap I had from another bag. The shackles are from Home Depot (Everbilt 3/16 Anchor…
Created some specific tuck box inserts for the robotics, selenium and evergreen companies
![Radioshack RC Car Tire & Rim Assembly [FREE]](https://media.printables.com/media/prints/1202421/images/9031347_86046047-ee6c-4f77-8416-826405a29bfb_e22a39e5-ff4d-4c3b-be61-1acb06b2c45f/pxl_20250222_124357543.jpg)
