Counting matching models…
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Quick and easy Visor Sharpie/Pen universal clip. Great for field workers who need to scribble quick notes occasionally, and can't get caught without a pen! Printed in Prusament PETG.
Sometimes sharpies write a little too sharp. This airbrush mod fixes that by makes sharpies able to draw nice noisy airbrushed lines. Simply attach a straw that you can get with a drink at any fast food place and blow through it. The…
I Designed a stylish Tape roll and Sharpie marker holder. It fits perfectly inside a 77mm diameter tape roller and keeps your supplies neat and accessible. The holder has a special compartment to securely hold your Sharpie, making sure…
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Cricut Pen holder for Sharpie. Extra fine has been tested, Fine is still under development. It should be adaptable for most pens. Check out the spreadsheet in the Freecad source. Print .2mm layer height, no supports. Flip it so that the…
When designing a 3D object, it is good practice to first model the object you are designing around. The most recent Prusa Flash Contest is focused on Sharpie Mods , and I have seen many entries that only rely on a simple radius to…
Takes up one hexagon on the Storage Wall, requiring one of the standard M3 inserts available in that project. Stores a standard 12mm diameter Sharpie pen, and just needs a small push to clip the pen in, giving a satisfying little click.…
Mount a sharpie inside a drawer that will automatically present itself for quick access. Simple lever mechanism will lift and lower the sharpie when the drawer opens and closes. Easy one-handed operation! Update 2022-08-27 New version of…
25/04/2024: V2 Version - added cutouts to the sides so sharpies and pens with pocket clips should also fit 4 of the holders now. Thank you @XanderShade01_404080 for the idea. Here is a link to his remixed version.…
This is an original pantograph design made to hold a traditional sharpie. The design allows the user to either double or divide the tracing in half by switching the location of the sharpie. It also includes a holder for a 40x40mm stencil.…
A replacement lid that fits a Sharpie, made in the form of an historically accurate medieval mace, being modelled on one of the maces in the Royal Armouries Collection of Leeds, England. It prints fine, vertically positioned, without…
The Sharpie Fine markers will fit in the Cricut Joy, but the rim is different from the original markers. With this adapter you can use your Sharpie on the Joy without problems. Incl. Fusion360 file
Holds sharpies, which is a bit fatter than most pens. It can even hold a set of tweezers. Connects to the multiboard system using either a snap or pushfit. There is also now a 15mm version to hold larger items, e.g. toothbrushes. See more…
A remix sharpie holder with just one sharpie for multiboard
A modification of MikkoP's Sharpie Storage Block that allows four standard black sharpies to be stored tip down as well.
A simple stand for markers of all kind
ARTICULATED SHARPIE GUY As requested, here is my articulated version of the Sharpie Guy. I designed this based off the 3.5" G.I. Joe's from my childhood. I printed mine at a speed of 50, with a resolution of 0.2 mm. Assembly instructions…
A shallow tray for Sharpie Pens. Two depths. Deep on better for stacking. The shallow one site nice as a top tray - I needed it to fit an extra layer in the draws I'm using.
It may not be a replacement for true colored filaments, but now you can add any sharpie color you want to your filaments. I've tested a few filaments and found that matte white and clear filaments do the best at taking the color. Pictures…
Compact Sharpie organiser that keeps markers upright, secure, and easy to access. Space-efficient grid layout with a stable base for everyday use. I've given them a slight forward lean and a staggered the height of the rows for easy…
This is Deadpool's head with holes sized for sharpies but other pens or pencils will fit fine, Was printed on anycubic mega pro, can do 5 to 10% infill, I used 0.20 layer height.
A clip for a sharpie to attach to your hardhat. One warning it the clip is a tight fit and difficult to get off after its attached
Multiboard Holder for your Pen, Knife, Sharpie or Pencil. This prints perfectly without any type of support. I designed this to be right in the sweet spot so it can be used for multiple items. The opening is 11mm wide. The unit is 45mm…
When I saw the sharpie sword hilt - https://www.printables.com/model/252108-sharpie-hilt-pen-is-mightier-than-the-sword I knew immediately where I wanted to store it. Printed at 0.2mm layer height & 40mm/sec, this is a 7hr print. Used…
Give your Sharpie a bit of personality with this mod. Requires supports to be turned on. I printed at 0.2mm layer height with a speed of 100. If you have any questions, don't hesitate to ask. UPDATE: I made an articulated version of this…
This is a remix of a model made by Kezat. I made it longer, put accurate millimeter and imperial measuring marks on it, made the tightening knob larger and reduced clearances for moving pieces for more accurate drawing. • After printing,…
As a maker, I'm constantly looking for ways to maximize the utility of the gear I use. Why should any tool have only one purpose? This simple print will instantly improve the form and function of a standard fine point Sharpie marker. Take…
This is a mount for 1" pegboard with 1/4" holes designed to hold up to 9 sharpies at once. As shown, this was designed to fit multiple mounts side-by-side so I could use it in conjunction with 3 packs of 12 sharpies. It does require…
Stone pen holder for use with the Sharpie sword cap (by @cartyski) Make sure the volume is set negative within slicer
Soooo I need to change the wasteboard bed on my CNC and changing the layout to something a bit better for me so I need to plot the work area. There are lots of options but I wanted to use a sharpie and wanted to be straight up and down…
Desk organizer for 24 Sharpie pens.
I use a sharpie at work all the time and hate having them in my pocket. This is a simple way to have one on you all the time, and without it in it doesnt really get in the way. I have used this for about a year and the clip holds very…
I designed these two little attachments for the Ikea Skadis because I wanted to keep my pen and my sharpie with the other tools, always at a good reach but without cluttering the workbench. They are available in two diameters, 12mm and…
Standard size ball marker. Dimples in ring allow the ball to be turned making a straight line anywhere on the ball. Printed in PETG but any will work. Slightly flexible to allow ball insertion, and slightly snug to hold ball so you don't…
Here is a great adapter that will let you use a sharpie with your Silhouette Cameo 4. The fit for the sharpie is tight for a reason, its a pressure fit so it won't come out. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
A small-scale Buster Sword that you can stick a sharpie into and use as a grip. It's stupid and impractical but I think it's a nice little novelty. Printed vertically on my Anycubic Kobra Neo. No supports, but I did use a raft for a…
Forget about those awkward moments when you leave your drink to go to the toilet and when you come back you find a table full of the same colour cups without knowing which one was yours. Either to protect yourself from covid or to take…
This is a remix of Vandelayandco's Sharpie Holder, made compatible with the Honeycomb Storage Wall . No supports needed.
Bring a used-up Sharpie marker back to life as a handy bit driver. Two different model files - one for typical ¼" bits, a second for 4mm electronics bits. Bit is held securely by a 6mm diameter by 3mm thick neodymium magnet printed in…
Add the ability to use Sharpie pens with your Cricut! Tested with the Maker, should work with other models too. Prints well with PLA, works well with the 'Avoid crossing perimeters' setting to ensure there's no stringing. I tried Martin…
A basic 1x1 holder for a pair of Amazon Basics scissors and 2x Sharpie pens stored cap down. This is a double height Gridfinity box so may require magnets to stabilise (I don't use them but the holes are there).
This is an adapter for a normal Sharpie (Fine Point). This will work in a Cricut Explore 3 ( or probably any Cricut Explore version ). Print takes about 10 minutes and doesn't require supports. I printed mine in Hatchbox Black PLA.
Toss some 1" double sided tape VHB or whatever works best for you on the back and stick it where ya need it. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: esun PLA+ black…
After trying out a couple of adapters here, I decided to venture out on my own. The simple version seemed best. I've included the two files for Fine Sharpie pens and Ultra Fine pens, but there are instructions on how to alter the F3D file…
I have created a customizable Sharpie cap that can be edited in Fusion 360 (The Hobbyist Version is fine). Or if you don't want to customize, there is “The Good One” because we all have a favorite Sharpie. There are a couple of parametric…
Here is a 2x6 Sharpie container! Print in any filament, no supports needed.
Primarily designed for ‘Sharpie’, some large / thick pens or markers, similar to the diameter of the sharpie can fit into it. Aesthetically, Sharpie looks better in the ‘pen stand’. Assembly is easy and intuitive. Print Parameters : Layer…
I was looking for a stand for the 24 pack of Sharpies I recently bought and couldn't find one I liked so I designed my own. Works great and despite the small footprint is very stable. All Sharpies are easy to quickly grab, even the ones…
Pen/Sharpie holder for WallControl system. This uses the dual slot base from here: https://www.printables.com/model/53629-wall-control-hooks and mixed together with Tinkercad which you can tinker with here:…
Holder comes in 3 sizes: 10, 11 and 12mm. I do recommend to print with 0.6 nozzle & Arachne perimeter generator (for speed). One holder has room for 19 pens.
This remix simply includes a stone for a mythical desktop display,
Organise your desk, make it easy to find your Sharpie fine point pens. Holds 18 pens. Printed in PLA 0.2mm layer height with 3 perimeters to increase strength .
Designed a sharpie clip for a hard hat that doesn't use the slots for face shields.
I started this as a half joke but it works, so hear me out. It is my answer to a question nobody asked, that is what's the most stupidly overthinked (I dare not say overengineered because engineering is something else) piece I could…
Here's a sharpie holder for a standard "american" peg board! It holds just one regular sized sharpie marker. Note that it can't be removed from the peg board when it has a marker in it.
Inspired by the 90s arts and crafts craze this blow pen fits a Sharpie marker use it to make freehand airbrush art or grab a stencil and be your own banksy. fits standard sharpie marker, brand new markers work best. demonstration on how…
This is a quick Tinkered remix of Donald Sayers' Clipie Hat Clip. The clip's tolerances are tighter on the pen and marker. I needed something to securely hold a pen and marker to my hat at work and this works great. The pen is a Uniball…
This is a sharpie organizer for drawers. Design to be on the top of the stack. Two model general 2x4 and compact 1x4.
My Sharpie collection has continued to grow, and since I use them almost daily I wanted something where I could store/display them on my desk in a practical manner. I came up with this design which is basically offset cylinders staggard…
Sharpie holder for 8 fine point markers. Hexagon model saves space. You can place the marker with the cap up or down. 0.2 layer height
Hardware required includes: x1 “Regular Size” Fine-Point Sharpie (Any color works) x1 Compression Spring x4 Socket Head Cap Screws
Pour ranger mon dock SHARPIE sur le panneau SKADIS (voir sur mon profil “Dock feutres SHARPIE Fine Point”) https://www.prusaprinters.org/fr/prints/103894-dock-feutres-sharpie-fine-point PETG - PLA Infil: 30% (surtout pour les crochets)…
Background If you're a standard Sharpie user, you've used the clip built into the cap. The Metallic Sharpie is great, but doesn't have a clip-cap because it should be stored cap-down to work properly. Due to this feature delete, it…
This is a remix of my Sharpie Guy entry into the Sharpie Mod contest. This was so much fun to make, especially the nunchucks. I printed the arms, legs and shells at a speed of 100, with a resolution of 0.2 mm and everything else at a…
A sharpie holder mounting with double sided tape or a command strip. I try to mark my furnace filters with the date installed and wanted to keep a sharpie close. The mount provides enough grip to securely hold the sharpie vertically or…
I use it on my Adventure Racing backpack Measure the width of your strap, print it and finagle it on the strap. It is hard to put on a strap, but that means it will stay on the strap really well.
Insert your Fine Point Sharpie into one of the spiral holes and rotate the spiral around the ring using the Sharpie as an axle. I added tolerances to the gears, but they are a little tight right off the bed, you will need to run it around…
Remix of m-maiers Multiboard Holder for Sharpies to be directly snapped onto openGrid.
Supports are needed and have fun printing and using it!
I designed this holder so that I could trace the outline of a part and check clamp clearance on a CNC Mill. I didn't like the idea of using a balloon as a spring and wanted to design something that was mostly 3D printable. The top has a…
This is a Sharpie ultra fine Pen holder for Silhouette plotters. It is designed for the Portrait, but it should also work with the Cameo plotters. An M3 screw and nut is required for the clamping, to prevent the pen from being pushed out.…
Portal Diorama - Sharpie Holder This neat Portal Diorama not only will hold two Sharpies, but also be a nice looking print on your desk! Note that the left Sharpie needs to be inserted without the cap. Assembly: Print everything as…
Clip your Sharpie to your ball cap when you are out and have no pockets. Quick, easy print.
Simple adaptor to turn a sharpie into an X-acto knife. Requires a small screw to secure the blade.
Holder for three 11mm diameter Sharpie pens. Will work with anything with a diameter of about 12.8mm or lower. Designed for US sourced 1/8" thick MDF pegboard with ¼" holes on 1" centers. Might work with other types of pegboard but I…
Holder for 20 Sharpies. Keeps the Caps inside. Best printed in Transparent material to see the Colors. Be aware: The hols of the caps a little bit to wide. Just use some tape around the caps to keep them in place if needed. I included the…
Transform any standard sharpie permanent marker into a discreet and effective self defense tool. This 3D-printable insert is designed to fit snugly inside the marker body once the ink cartridge and tip mechanism are removed. This insert…
Pencils, Pens, Sharpies, and 3-IN-ONE Oil Wall Mounted Holder If this helped you out, tips are welcome on PayPal or Venmo If you decide to print or remix your own, I'd love to see a picture of how it turned out. Category: Organization
I couldn't find a mount that worked well with the S1 so I made my own. This is used to mount Devin Montes' Filament Blender to the Ender 3 S1 with 1 Screw (Same screw that comes in accessories pack or equivalent) The Screw is on loose to…
This is a Gridfinity module designed for Zack Freedman's Gridfinity system. It holds 1 sharpie, 1 exacto knife, and a lot of extra blades. I printed this at .20mm layer height with 15% infill.
Ever wanted to skip sketching a straight line or circle with pencil and go straight to maker? Me too!! And you probably know that in doing so you may ruin the drawing!!:( Well your in luck! Introducing the Tool Sharpie 3 in 1 tool for…
2 Nema17 motors 8 mm threaded rods, axles and ball bearings 3 mm screwings of the motors etc. Arduino Nano and CNC Shielt V4 A4988 stepper motor driver Arduino Micro to control the SG90 Micro Servo Software Grbl 1.1 Lightburn Software to…
Remixed the model to remove need for supports and added a letter which can be changed at the top of the cap.
https://www.etsy.com/listing/1288896022/3d-printed-sharpie-mountsholder-magnetic?ref=listings_manager_grid
stick your sharpie anywhere with this magnetic clip on cap magnet designed for 10x3mm magnet for best results print at 0.12mm layer height
This clips to your cap in a second and allows you to grab and store your sharpie in half that time when you need it. There is a slight angle on the clip to keep the sharpie somewhat out of your line of sight and prevents it from…
Holes are 40 mm deep, 12 mm diameter.
The photo shows one of these levers (with a brass bead) posed (but not installed) on a harp. Other levers in the photo are Musicmakers Universal levers. Most harps are diatonic - the strings are tuned to a single major scale, usually C.…
A remix of the popular fidget toy, now as a sharpie cap/stand
Customized version of https://www.thingiverse.com/thing:40406 a simple print in PLA, no support needed.
Has a stacking lip so you can fit two of these trays into a 6u high space.
Clip your Sharpie or Parcelmate to your fridge, or any other magnetic surface. Uses a 10x3mm cylindrical magnet.
Most of the Sharpie holder designs I've seen store them with the tip up, and while this may look nice and make it easy to find the right color, this tends to dry them out, as the ink flows down away from the tip. This design allows you to…
I saw that all other single Sharpie holders were a bit ugly and square so i quickly made this up in fusion 360. uses the push fit to mount to a multiboard snap. orient so that the push fit is horizontal.
Easy to print, no supports required. You might want to print with a brim, because there is not a lot on area touching the bed.
A cap for your sharpie to look like Mjolnir
Slip-on fins for a standard Sharpie marker. It makes your Sharpie write better, as well as fly a bit straighter if you throw it. Included are standard fins, the Buck Rogers, and Modern fins. You'll need good layer adhesion for the latter…
![Sharpie Compass [Large Circles]](https://media.printables.com/media/prints/254399/images/2288096_0ac1b3cb-8aec-47d3-8add-51f4f58a0adb/cc7f46bf-b32e-4a85-99bc-cff5815763a5.jpeg)
