P
PrintablesPeter Farell
Stormtrooper Sharpshooter of the First Order.
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
- Downloads
- 2,030
- Likes
- 619
- Rating
- 5
Search results: sharps
121 models
P
PrintablesWizavich
Insulin Needle Sharps Dispenser
I wanted a dispenser for my insulin needles that could hold a lot of them. The 110mm tall one should hold an entire box of 100 comfortably but there are smaller versions included if you prefer. The inside has a small slope to help them…
- Downloads
- 810
- Likes
- 145
- Rating
- 5
P
PrintablesNoktious
Safety Razor Blades Sharps Disposal Box
Tossing used blades in the trash is really bad. Tossing them in this box, and then in the trash is much less bad. NOTE: The razor blade silhouette on top is a separate solid body within the mesh of the box, you can select it in the…
- Downloads
- 739
- Likes
- 62
- Rating
- 4.71
P
PrintablesStay At Home Bob
Sharps Disposal Can for Utility and Hobby (X-Acto) Blades
This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…
- Downloads
- 694
- Likes
- 123
- Rating
- 4.94
P
PrintablesDigital Forge 3DP
Sharps Container
When my pharmacy started giving out cardboard sharps disposal containers (which they then refused to accept once they were full), I decided to put together my own sharps containers. I've included two versions on four plates - a square…
- Downloads
- 385
- Likes
- 14
- Rating
- 5
P
Printableszeroflow
Razor Blade (Sharps) Container
One-Way container for used razor blades Print instructions Print with the opening down. https://a360.co/3diroqg
- Downloads
- 367
- Likes
- 40
- Rating
- 4.8
P
PrintablesMrGreaterThan
Blade Bin - Utility Knife Sharps Container
This container is for safely disposing of your utility knife blades. Drop them in through the slot on the top and throw the whole bin away when full. The internal geometry prevents the blades from falling out. Update - 11/18/2025:…
- Downloads
- 266
- Likes
- 24
- Rating
- 5
P
PrintablesThump2010
Diabetic Pen Needle Sharps Container
I wanted something on my desk that was not huge, bright red and with bio hazard signs on it for my diabetic pen needles so I came up with this. It has a needle bender for both ends of the needle cap, one is just a hole, lay the needle at…
- Downloads
- 253
- Likes
- 33
- Rating
- 5
P
PrintablesT-MAN
Diabetic sharps container
I designed this simple sharps container to be printed without supports quickly and I wanted a compact form factor. I also wanted to make sure people knew there were sharps in there so I put a biohazard ☣️ symbol and a “WARNING SHARPS” on…
- Downloads
- 247
- Likes
- 37
- Rating
- 5
P
PrintablesDinoOnTheInternet
Sharps Container
The sharps container will accept blades up to 25mm in width. The outer dimensions are 40x30x68.4mm . The model comes in two parts, the main body with debossed text and the text object. If you want the single color container, print just…
- Downloads
- 194
- Likes
- 10
- Rating
- 5
P
Printablesjaztermareal
Sharpshooter mode and mid transformation versions Star Wars DC15 A rifle with enhanced detail for 1:12 , 1:6 and 1:1 figures and cosplay
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. Two more variants of the enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. This time one…
- Downloads
- 187
- Likes
- 44
- Rating
- 0
P
PrintablesMartin Lyne
Travel Sharps Container - Prefilled Injector pen
I've been looking for a travel sharps container for prefilled injector pens for a while now but the only ones that would take a full sized pen are 0.5l bins and far to big for air travel. The model consists of two parts and screws…
- Downloads
- 164
- Likes
- 25
- Rating
- 5
P
PrintablesConnorBGenc
Vase Mode Sharps Disposal for Box Cutter and Razor Blades (Gridfinity Compatible)
Throwing out box cutter blades or razor blades? Don't just throw them in your trash or leave them laying around, or you risk accidentally cutting yourself! Print this quick sharps disposal container instead. This is a vase mode print, it…
- Downloads
- 160
- Likes
- 21
- Rating
- 5
P
PrintablesSnobbyComa8
Sharps Container (MMU)
Simple case for sharps disposal. Lid requires a multi-material printer for the label. Glue the lid on after printing.
- Downloads
- 155
- Likes
- 32
- Rating
- 5
P
PrintablesErik van de Pol
![[ALCH] sharps / blade disposal box (ModuBox)](https://media.printables.com/media/prints/469779/images/3849579_e015dd7a-3ea9-41e1-a76d-c0196c71941b/blade-disposal-1x1.jpeg)
[ALCH] sharps / blade disposal box (ModuBox)
Don't throw hobby knife blades in the trash! This is a 1x1-grid, sealed blade disposal storage box, compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular…
- Downloads
- 146
- Likes
- 24
- Rating
- 5
P
PrintablesRobMcFarlane
Simple Sealed Sharps Bin
Designed as a quick single piece print to give a safe way to dispose of old blades. Printing Notes ----------------- To get the best result, print the model upside down (slot against build plate) to prevent drooping when bridging the gap.
- Downloads
- 132
- Likes
- 4
- Rating
- 5
P
PrintablesElectrical_Imposter
Pegboard Razor Blade / Sharps Disposal Bin
I got sick of the old bottle I was using to dispose of razor blades taking up room on my bench, so I designed this to mount on a pegboard. Its sized for 1/4" holes at 1" spacing. Print Settings Notes: Optimized for the following print…
- Downloads
- 115
- Likes
- 29
- Rating
- 4.67
P
PrintablesSlow3D
Sharps Container - Large
Container for safe sharps disposal like needles and cannulas. Two lid types allows for day-to-day use and disposal. The solid lid is used to close the container prior to container disposal. The other lid has restricted portals for needle…
- Downloads
- 108
- Likes
- 7
- Rating
- 4
P
Printablestooclewell
Razor Blade Sharps Container (Vase Mode)
Vase Mode print for a razor blade container. Seems like blades can still fall out if you hold it upside down, so I'd recommend taping over the opening before disposing! I printed at 0.3mm layer height with an extrusion width of 0.8mm…
- Downloads
- 108
- Likes
- 10
- Rating
- 5
P
PrintablesCrossCartridge
Sharps Rifle box patterns and jigs
measure your cartridges to make sure they will fit. Print the pattern and make a test box. The folding block is used when taping the corners. Some of the scoring jigs are imported together into the slicer, use left mouse button on the…
- Downloads
- 106
- Likes
- 14
- Rating
- 0
P
PrintablesSlow3D
Small Sharps Container
This container was designed for safe sharps disposal like medical needles and cannulas. It is based on the Australian Standards for Sharps Injury Protection (AS 23907:2023) The key requirements, from the standard, that were incorporated…
- Downloads
- 94
- Likes
- 3
- Rating
- 0
P
Printablesbiketiger
SHARPS DISPOSAL CONTAINER
Disposal container designed for Xacto blades Small size for desk drawer convenience. No supports necessary
- Downloads
- 94
- Likes
- 13
- Rating
- 5
P
PrintablesEd Ivory
Sharps Container Magnetic
A used sharps container for the workshop. There are recesses in the back for removable magnets. Quick and dirty design. Make it better if you like. ***Not parametric*** But the fusion design files are here so you can play with it, just…
- Downloads
- 94
- Likes
- 11
- Rating
- 0
P
PrintablesMatt
Scalpel and Blade Sharps Disposal Container
I made this for collecting my used scalpel blades. Affix lid with CA glue for a permanently enclosed container. This model has not been designed for clinical waste containment or disposal. Please check your local laws/regulations for…
- Downloads
- 93
- Likes
- 12
- Rating
- 0
P
Printablessmdollins
HSW Sharps Container
Print Instructions : Print upside-down (slit against the print bed) 2 walls no supports
- Downloads
- 86
- Likes
- 13
- Rating
- 5
P
PrintablesRevlos
Sharps Container
First thank you for an awesome model!I modified it slightly to be a desktop sharps container. I was recently diagnosed type 2 and needed something to store my sharps in. I figured I would 3D print a smaller container that fits nicely on…
- Downloads
- 84
- Likes
- 6
- Rating
- 5
P
PrintablesAsa
Sharps Container - no supports needed
Stay safe and dispose of those sharps properly! If you don't know how to do a color change in Prusa slicer see this video for a tutorial (no MMU nor AMS needed):
- Downloads
- 83
- Likes
- 24
- Rating
- 5
P
PrintablesFutrell Garage
Sharps container for needles
Simple container for my used syringes. The lid and container fit on the Creality K1 build plate.
- Downloads
- 81
- Likes
- 8
- Rating
- 0
P
Printablesddl.vnt
ddl sharps razor blade box container
simple box container to store used DE safety razor blades be careful when trowing them in the bin, might be very dangerous for you and other operators print as in the model, i'd recommend not to use layer height greater than 0,2mm pretty…
- Downloads
- 81
- Likes
- 10
- Rating
- 5
P
Printablestooclewell
Rotating Sharps Container
Printed on bambulab p1s with 0.16 layer height. Rotating section has a 0.2 mm clearance. OnShape Files:…
- Downloads
- 81
- Likes
- 8
- Rating
- 5
P
PrintablesMichaelKroes
Sharps container with Tickle Flex
This sharps container for diabetes needles contains a holder for a Tickle Flex and new needles. The hazardous waste logo is printed with a color change mid layer by setting the number of extruders to 2 and setting the extruder change…
- Downloads
- 79
- Likes
- 10
- Rating
- 5
P
PrintablesClaire321H
Utility Blade Sharps Box
Box to deposit spent trapezoidal utility knife blades. Keeps blades secure with tapered interior opening to prevent blades from falling from box if overturned. Do not overfill box. When depositing a blade becomes difficult, dispose of the…
- Downloads
- 73
- Likes
- 8
- Rating
- 5
P
PrintablesAstrobirder
Clorox Bottle Funnel for Sharps disposal
This funnel fits a US Clorox Bleach bottle to make it easier to use as a sharps disposal. Can be used for hobby blades (x-acto and similar), razor blades or diabetes sharps like pen needles. There is a thin wall that fits inside the lip…
- Downloads
- 71
- Likes
- 23
- Rating
- 0
P
Printablessui77
Sharps Container
This sharps container provides a secure solution for the disposal of needles.
- Downloads
- 69
- Likes
- 11
- Rating
- 0
P
PrintablesDakumori
Sharps Disposal Container
A simple sharps disposal containers with biohazard warning labels and a screw on top for safety. Prevents needle sticks for trash disposal workers. I recommend printing in a non-brittle filament to protect against drops. Ideally ABS or…
- Downloads
- 64
- Likes
- 14
- Rating
- 0
P
PrintablesStefan Kellner
Dew Shield for Sharpstar 15028 HNT Telescope
Simple dew shield. I covered the inside with velours.
- Downloads
- 62
- Likes
- 4
- Rating
- 0
P
PrintablesAnosognosia
2L Pop Bottle Sharps Lid
I found similar adapters online, but they didn't fit my pooch's larger insulin needles. This screws into the top of a 2L PET bottle, and can be sealed with the original lid during use or when full. the slide could be finessed to reduce…
- Downloads
- 62
- Likes
- 11
- Rating
- 0
P
PrintablesNick
Sharps disposal container big enough for Olfa blades
Glue the top to the base, and then slowly fill it up with your used blades over time. In 30 years when the container is full, throw the whole thing away and make a new one. Don't be that guy or girl who throws razor blades into the trash.…
- Downloads
- 62
- Likes
- 5
- Rating
- 0
P
PrintablesMatt Gard
Drop Target for a Game Plan "Sharpshooter"
This is a recreation of a hard to find pinball machine part. Thanks to njPinWiz for supplying a part to take measurements from. Measurements were rounded to the nearest mm. I did not "hollow out" the back of the part. The walls of the…
- Downloads
- 61
- Likes
- 0
- Rating
- 0
P
PrintablesAaron L
Sharps container
This container is meant to be a safe way to dispose of double-sided razor blades. The blades easily slide in from the top and won't come out again. I only tried printing this on a Prusa MK3S and I suspect it'll be fine for any other…
- Downloads
- 61
- Likes
- 5
- Rating
- 5
P
PrintablesJay Dubya
Sharps Keeper
I'm diabetic so I have to prick my finger, twice a day, with a sharp lancet to measure my blood glucose level. The used lancets need to be stored until they can be safely disposed of. I wanted a container that was easy to put them into,…
- Downloads
- 59
- Likes
- 11
- Rating
- 5
P
PrintablesTJJohn12
2nd Mass. Sharpshooters Monument - Gettysburg, Pennsylvania
Two companies of Massachusetts sharpshooters, a rarity in the American Civil War, fought as independent units attached to other commands. The 2nd Company of (Governor) Andrews sharpshooters was attached to the 22nd Massachusetts Infantry…
- Downloads
- 57
- Likes
- 9
- Rating
- 0
P
Printablessquidmouse
Sharps Container with Drop Slot
Recently got diagnosed with type 2 diabetes. Started using a glucose monitor and realized I needed a place to put my used lancets and test strips. So I designed this simple two piece container that I can easily deposit and dispose of…
- Downloads
- 53
- Likes
- 10
- Rating
- 5
P
PrintablesDiscotehk
.50-90 Sharps Cartridge Model
This is for a breach block shot counter for the Deadlands TTRPG. It's a 1 shot rifle so you really only need one round but you could always use them to fill out a Quigley Down Under cosplay, other bandolier or ammo belt. Cat for scale No…
- Downloads
- 52
- Likes
- 5
- Rating
- 0
P
PrintablesWhat2Print
Needles/Sharps Box from Insulin Pen
A used needles box from insulin pens. I made this blue box and red lid for the sharps.
- Downloads
- 51
- Likes
- 9
- Rating
- 5
P
PrintablesCyclone-6
Portable Sharps Needle Container
This is a portable, disposable Sharps needle container (for diabetic needles, etc) with one hand closure and snap lid. This model is NOT FDA-cleared and should be used only when FDA-cleared sharps containers are not available. The model…
- Downloads
- 51
- Likes
- 7
- Rating
- 5
P
Printablesmabster314
Sharps Container
This is a small container I created to hold razor blades. It's intended to be disposed of with the sharps inside of it, and is marked “SHARPS” on the side. Print it with the slot facing the print bed. I used 15% lightning infill.
- Downloads
- 49
- Likes
- 2
- Rating
- 5
P
PrintablesGuym
Solar filter for SharpStar 61EDPH V3
3D Printable Solar Filter – SharpStar 61EDPH V3 Description This is a front‑mounted solar filter holder designed specifically for the SharpStar 61EDPH V3 apochromatic refractor (61 mm aperture). The model is intended to securely hold…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesCamPaine
Sharps Bin for HSW
This is a sharps bin for Honeycomb Storage Wall. Once the bin is full throw it in the bin and print a new one. Designed so that once blades have gone in they cant come back out. I have Tested for 10A blades and Stanley blades If you wish…
- Downloads
- 48
- Likes
- 14
- Rating
- 0
P
PrintablesCarbon by default
Simple Sharps Container / Box ( sealed )
Small sharps container designed to be printed in one piece for personal use. It has 1.35mm walls all around ( ~ 3 perimeters ). As shown in galaxy black PLA. No supports needed. Use your best judgement when handling sharp objects. I do…
- Downloads
- 48
- Likes
- 5
- Rating
- 5
P
Printableswesleyac
DE Safety Razor Blade Sharps Bin - Print In Place (by alasdairedward)
This is a reupload of DE Safety Razor Blade Sharps Bin - Print In Place by alasdairedward on Thingiverse! This is a print-in-place sharps bin for DE razor blades. It should hold at least 60 blades and is completely sealed so it can be…
- Downloads
- 46
- Likes
- 4
- Rating
- 0
P
PrintablesJon@Studio17o7
Mounting Bracket for 5 Quart Sharps Container
Wanted a simple mounting bracket for an Oakridge 5 QT Sharps container I have been using for home sharps disposal. All of the brackets I could find were either way more complex or way more expensive than I needed. (All designed for…
- Downloads
- 43
- Likes
- 6
- Rating
- 0
P
Printablesmatt
Sharps container
Just a small Sharps container, Couldn't find one I liked so I made it. 0.20 standard X1C, with 5% infill for me. Its my first model I have uploaded so please be kind to me lol. There is an open top one with lid and a compeltly closed one…
- Downloads
- 42
- Likes
- 6
- Rating
- 0
P
PrintablesFoden
Disposable, or emptyable, sharps container
I really liked the original container but it was just a little too narro for the blades I use to lay flat. So I up'd the scale to 108.7%, exported the lid and edited that in F360 - added a ‘shute’ to make it harder for the blades to fall…
- Downloads
- 41
- Likes
- 9
- Rating
- 0
P
Printableswhy not
Portable Sharps Disposal Container
This is a portable sharps disposal container. It is designed for portable and compact laboratories and also to be hung from a backpack for easy use. this is a good print for taking studies into the field were you have to carry your…
- Downloads
- 37
- Likes
- 12
- Rating
- 0
P
PrintablesFelixAtter
Sharps Bins for small blades
print flat, model has internal arches to support roof so no additional supports needed. Smaller 30mmX80mm box works for most small blades as shown in pic. Longer 100mm version was created for a friend that does taxidermy and needed it for…
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
PrintablesBlargruck
Razor Sharps Container
This is a small razor sharps container for safe disposal of double sided razorblades.
- Downloads
- 35
- Likes
- 1
- Rating
- 0
P
Printablessmdollins
Sharps Disposal Container
Printed in PLA. No supports needed
- Downloads
- 35
- Likes
- 4
- Rating
- 5
P
PrintablesRyxxi_makes
Division 2 Sharpshooter class Cherry MX Keycap
Division 2 Sharpshooter class Cherry MX Keycap uploaded a new repaired model that fits the key better Category: Video Games
- Downloads
- 34
- Likes
- 8
- Rating
- 0
P
Printablese.nygren
Sharps Lid for protein powder container
Biohazard sharps container lid for protein powder container. The containers seem to come in multiple sizes — this one is for the one with the lid with an outer diameter of 139mm. It should be possible to adapt to the smaller size and I…
- Downloads
- 31
- Likes
- 6
- Rating
- 0
P
PrintablesWrightBuilt.ca
Sharps Disposal Bin
Designed to replace my full sharps container. Mostly used for broken utility/hobby blades. Objects inserted into the container remain inside well when inverted and shaken (I couldn't get any out and gave up after a few minutes). To find…
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
Printableswarms
Large Sharps Container
seal with gorilla tape and dispose of your sharps properly. opening in the model is slightly wider than in the photo shown, to accommodate slightly larger 3ml syringes.
- Downloads
- 29
- Likes
- 0
- Rating
- 0
P
PrintablesDiscotehk
50 Sharps mock breach block - single shot Deadlands shot counter
A single shot shot counter for the Deadlands TTRPG. Use it to keep track of whether you have a round loaded or not. Remove the mock round when you take a shot, load another when you successfully pass your reload. Gives you the feel of…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
Printablesericjray
Metro Shelving Clip-on Sharps Holder
I discovered the very well-made “CUP” holder from NotLikeALeafOnTheWind , and used that as the basis for a holder for a sharps container for my esthetician wife to use in her shop. Printing is straightforward with no supports needed.
- Downloads
- 26
- Likes
- 7
- Rating
- 5
P
Printablesmethlon
Gridfinity AmongUS sharps box
a Gridfinity AmongUS themed sharps box, just fill with blades (from behind) and Vent um I mean throw away included 2 versions with recycle tags (PLA and PETG) should print without supports enjoy
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
PrintablesHawkeye
0.8 MOD gear 80T (for Sharpstar Askar FMA180 telescope) & 0.8 MOD gear 40T (for ZWO EAF motor)
This is a 0.8 MOD gear 80T for Sharpstar Askar FMA180 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 40T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
PrintablesTurnipToss
DE razor blade sharps bin
Made a small simple box to hold used sharps. Holds half size DE blades as that is what I use. Tape or glue the bottom to the top. STEP and Solidworks files are included for modifications. Print Settings Printer Brand: Prusa Printer: I3…
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesGeorge
Sharps / Razor Disposal
I needed a better way to discard used utility razor knives. i was previously wrapping in electrical tape, but that was never a guarrentee for safety. This was a simple solution and portable / stowable option for those interested. The top…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesHawkeye
0.8 MOD gear 114T (for Sharpstar Askar SQA55 telescope) & 0.8 MOD gear 57T (for ZWO EAF motor)
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesYourRobotOverlord
Safety Snapper and Sharps Collector for Retractable Utility Knives
I created this for use at work to provide a safer way to snap off Olfa blades and collect the sharps for disposal at the same time. There are two for the most common blade sizes: 18mm 25mm
- Downloads
- 21
- Likes
- 7
- Rating
- 0
P
PrintablesGenericLifeform
Break-away Segment Knife Sharps Holder
Container to safely break and store the shards of a break away knife. Easy to print and just throw away the whole container once full to safely dispose of the shards.
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
Printablesmeub
1993 Nerf Sharpshooter Conversion for Elite Darts
This is a drop in replacement for the stock plunger on the 1993 Sharpshooter for one that supports a 17/32 brass barrel for use with Elite darts. It can easily be swapped in for the stock plunger without any permanent modifications to the…
- Downloads
- 19
- Likes
- 6
- Rating
- 0
P
PrintablesKosmos Design
Sharps Box
This is a sharps box that I designed! It requires zero supports and should work with any print settings. Do keep in mind the warping of the corners, potentially better with a raft. FIX FOR WARPING To print without a raft: In PrusaSlicer,…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesFuNIILab
Reusable Sharps Bin
A reusable sharps bin for disposing glass/quartz micro and nanopipettes, commonly used in chemistry/biology laboratories. Although disposable sharps bin are preferred (and maybe mandatory in some places), access to these are not a reality…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
Printablescsh
Sharps disposal for X-acto blades -- Spiral Vase
I like to change out my knife blades early and often, but they are awkward to throw away. This simple sharps disposal container fits about eight standard #11 hobby knife blades. They blades will just fit in the slot, and won't come back…
- Downloads
- 17
- Likes
- 7
- Rating
- 0
P
PrintablesQueued
Diabetic sharps container, 2-color remix
A container for sharps, as per the original, remixed for multicolor printers
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
Printablessolids modeler
Sharps Portalab
A Sharps disposal kit with the capacity to attach lab collection or analysis accessories to allow for quick field setup of basic collection, sampling, and/or testing of clinical, chemical or biological requirements. Sharps container has a…
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
PrintablesRadek Průcha
Key top protection - Sharps gauge bonding
PETG or PLA, perimeters 3, infill 20%. Print on the side
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesIvy Nightwind
Sharps container wall mount for 2 gallon
Couldn't find a model anywhere for the 2 Gallon sharps containers I use in my tattoo studio to mount them to the wall. Saw this model by zoejanexy on Thingiverse however it was not the right size and shape for my standard containers.…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesEliTheAsianGuy
Insulin Pen Tip Sharps Container
Originally this was designed to fit the Unifine Pentips, which I am using this for. It will fit pen tips no larger than 18mm in diameter. The container features an angled opening, which I thought would help prevent needles from falling…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesCreatedByLayers
Sharps Disposal Warning Sign
This is a fun way to direct people where sharp items/objects can be disposed of. you will need to do color changes or use an mmu or ams to color the item in.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesgholland
Dwarf Sharpshooters
This is all the files from PhysUdo combined to print as one! Print Settings Printer Brand: Up! Printer: Up Plus2 Rafts: Yes Supports: No Category: Toys & Games
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesFoden
Sharps container - modified lid
Added lip to stop blades coming out
- Downloads
- 13
- Likes
- 5
- Rating
- 0
P
PrintablesJenno
Replacement Lid Converting a Lysol Bottle to a Sharps Receptacle
For personal home use only - not medically approved A replacement lid for an empty Lysol container (95 wipes size) that can be utilized for hypodermic syringes / needles collection before disposal. The outer seal rotates from its closed…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesRoman Hujer
EAF holder TS 76EDPH (Sharpstar)
Focuser holder for TS Optics 76EDPH (Sharpstar) APO triplet Support for: ZWO EAF OnStep Nema17 Focuser My Astro focuser BOM 1x GT2 Timing pulley 40Teeth/Bore 6mm 1x GT2 Timing pulley 20Teeth/Bore 5mm 1x GT2-142mm Timing Belt size 6mm 3x…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
Printablesslightlysneakyseal
Sharps container for razors and stuff
Print with the opening towards the bottom. Two version one with fully flat base for easier printing, one with a razor silhouette on it.
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesMaker Wulf
Utility Blade (Sharps) Container
This model scales up the original for use with utility blades. Adds a sliding dovetail for the bottom so everything can be printed easily without supports. Use a dab or two of CA glue to affix the bottom in place. Recommended print…
- Downloads
- 11
- Likes
- 6
- Rating
- 0
P
PrintablesKubamelon
Sharps Disposal Box for Safety Razors
Sealed box for disposal of shaving blades / other sharps
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesSysErr
Sharps dispenser
Use for storing/dispensing my sharps for my diabetic insulin pens
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
Printablespeepsnet
Half Razor Blade Sharps Bin
I wanted something to to store my used razor blades in. This uses very little filiment and is disposable. The blades are inserted through the bottom and won't fall out. I also designed a view port to see how full it is. The lid snaps on…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesJosh
Sharps Box
Sharps container to hold used razors and scrapers for later disposal. Print with the opening on the build plate to ensure the tapered face prints easily without any supports
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesc8_h10_n4_o2
Gridfinity 2x1 sharps container
A gridfinity bin to discard used blades in. This can be printed with zero top layers and zero infill to save a bit of filament in the bottom.
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
Printableswinchcable22
Sharpshooter Gun Shooting Rest PAD
Sand bag pad replacment for the (Winchester / Allen Company) Sharpshooter Gun Shooting Rest. Fols and pops in easily. Best prtinted in TPU 95A. Printing on side of bottom work. side is more durable but longer print time and sligth more…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesWhat2Print
Insulin Pen Sharps Container
Insulin Pen Sharps Container that is not to big but holds at least a few weeks of sharps. Can be printed with a single layer change at layer 120 on the lid to color the text. Use supports to get the text color different on the lid. The…
- Downloads
- 5
- Likes
- 3
- Rating
- 0
P
PrintablesMason Fizer
Small Sharps Container (Various)
Small square sharps containers. Project file has three different prints for 3 different sharps blades. The largest is the double-sided razor container, while the other two are for #2 and #11 X-acto blades. The slots are sized specifically…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesBenjamin Borshchevsky
Safe Disposal Box for Used Blades / Sharps
Both original models are fantastic!
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesNightStorm
Sharpstar 13028HNT-AL Dew Sheild
This is a fully parameterized dew shield I created in FreeCAD for my Sharpstar 13028HNT-AL Newtonian Astograph. . It prints in two pieces, a collar that fits around the OTA a mating the tube body. One can optionally put a piece of foam…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesMedieval Kenieval
Sharps Bin Wall Mount
Wall mount hook to hold the sharps bin out of reach of children and pets by fastening to the wall.
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
Printables
0.8 MOD gear 114T (for Sharpstar Askar SQA55 telescope) & 0.8 MOD gear 57T (for ZWO EAF motor)
This is a 0.8 MOD gear 114T for Sharpstar Askar SQA55 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 57T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…