Counting matching models…
Cardboard shipping tube lid Models: Simple lids for closing cardboard transport tubes. The lids are available in two sizes, for rolls with an inner diameter of 40mm and 99mm. The size can be adjusted with scaling in the slicer. For…
Tested and printed without issues using Cura slicer. A 20ft shipping container is a standardized steel unit, 6 meters in length, used for the safe transport and storage of goods by sea, rail, or road, and it is also commonly repurposed as…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the SGC…
This is the latch for attaching the handle to the Prusa printer shipping box I lost the box handle from my Prusa printer box and was able to reprint it thanks to @Pokohui. Unfortunately, I was missing the latch to attach the handle. A few…
This is a simple DDR4 RAM guard to protect a desktop memory module during shipping or storage. The RAM stick fits into the tray and stays in place. It helps protect the PCB and the gold contacts from damage. Made for standard DDR4 desktop…
Printing Instructions To achieve the intended look of a miniature cardboard box and a wooden pallet, printing with Wood PLA filament is highly recommended for this project. The natural texture and color of wood filament perfectly…
A shipping container that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. If you like this model check out this collection of my other toy train models.
This is just a box specially made to hold the Funwheel Box Front Battery Brackets by @LiaIsTheCutestKitten This box has a slide cover top, holds two brackets, and 4 bolts.
**** Update: I created a version for 2 pin Fender / LTD locking tuner style *** Created this model because I am planning to sell some of my tuners that I swapped out. I wanted to create a better way for shipping tuning pegs safely in the…
**** Update: I created a version for 2 pin Fender / LTD locking tuner style *** Created this model because I am planning to sell some of my tuners that I swapped out. I wanted to create a better way for shipping tuning pegs safely in the…
Cardboard shipping tube lid Models: Simple lids for closing cardboard transport tubes. The lids are available in two sizes, for rolls with an inner diameter of 40mm and 99mm. The size can be adjusted with scaling in the slicer. For…
As with the original, print it on it's back, the chamfer removes the issues with the sharp overhand. For the lid, there are strange artifacts that show up in the “N” (at least in Orca slicer) unless you disable the “Only one wall on top…
Tested and printed without issues using Cura slicer. A 20ft shipping container is a standardized steel unit, 6 meters in length, used for the safe transport and storage of goods by sea, rail, or road, and it is also commonly repurposed as…
This remix of the "Stackable Shipping Container Desk Storage Compartment" by 3D Mieks features the Chromakopia logo from Tyler, the Creator's new album on the side of the container. It retains the original stackable design, functional…
This stackable organizer tray is 130mm x 185mm x 35mm (~5" x ~7" x ~1.5") and is designed to hold the drop-off package receipts you get from places like UPS. Designed, so no supports are required!
(Re-upped these because Thingiverse continues to be retarded and won't re-instate the availability of the original thing. For a site the relies upon content creators to give their efforts for free, for its profit model, they really are…
DIY Maersk Shipping contaimner powerbank with 21700 cell. 18W PD module in use from aliexpress or similar https://www.aliexpress.com/item/3256807135744764.html…
Its a container ship with a shipping container. Hope you like it.
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
The shipping dewar positional cooling device (SDPCD, known as the ‘Cajun Ejector’) is a 3-D printable device that can assist cryopreservation with various standard cooling rates by use with shipping dewars. Efforts in development of…
Had get a whole bunch of end caps to label some tubing, so I whipped this up quickly. Made both 2.5" and 3" versions.
Shipping container for miniatures with 25mm base (necromunda, kill team, etc.) I am still counting on modifications and
This is a simple parts to replace damaged Creality K2 Plus back panel standoffs. Like many of you my new K2 Plus arrived with a little damage. I didn't even notice this was broken until I went to perform input shaping and the back of the…
Small shipping container for whatever you may need a shipping container for.
This rocket nose cone was designed to fit a shipping tube. I'm not sure if there are standard sizes for these, so please measure before printing. The file is labeled for the measured internal (INT) and external (EXT) diameters of the…
A dispenser for your desk, workbench or whatever place you use when packaging cards for shipping. Fits the Classic Shields, should fit the Peel & Seal ones too, but I don't have any of those to confirm. Load them up from the top and there…
Remix of https://www.printables.com/model/392555-hard-drive-disks-storage-rack I needed some small hard drive containers for shipping some hard drives. I remixed the model for shipping 2X, 3X, 4X, or 5X 3.5" Hard Drives.
This is the ultra basic version of the parametric box with hinges and latches I've also published on here (check it out under my profile). This version of the box has no mounting points for hinges or latches and it just for shipping…
I designed a tiny shipping container that can be 3D printed without supports, perfect for diorama displays. Nozzle size 0.4 mm Layer height 0.2mm 1.75 PETG filament Nozzle temperature 240°C Heated bed temperature 80°C
Designed for Gaslands, but works with any Hot Wheels or Matchbox Sized cars. Uses magnets to attach lid.
Designed for Gaslands, but works with any Hot Wheels or Matchbox Sized cars. Uses magnets to attach lid.
If you ever had the ends of your bicycle wheel axles get damaged during shipping like this: Then these are what you need for safe shipping...lol. New wheels are typically shipped with them but they usually get tossed or you can't find any…
This is a set of military shipping containers that I designed. Scaled to 1:100 but I would recommend printing at 200% (1:50) if you need to plan with the PALCONs and 463L pallets due to their size. I also included the 20ft Container by…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the PSA…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the SGC…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping PSA…
I developed a series of collectible card protectors to protect the expensive cards that I was shipping out for sports cards and other collectible cards sold on eBay and through other sites. After cutting up cardboard and wrapping the…
I wanted to put a dehumidifier inside my shipping container, and allow an electrical extension cord and water hose to pass through to provide power to the dehumidifier and allow exhaust water out without rain leaking into the shipping…
This 3D-printable shipping container design offers full scalability, allowing you to produce models in a wide range of sizes. Material PLA Infill: 20% Resolution: 0.4mm Thanks
This compact and practical storage box is perfect for organizing small items such as electronic components, screws, nuts, bolts, or desk accessories. The design is optimized for easy printing with no supports required and walls thick…
A model I made while messing with shapes in Tinkercad. I decided to make the shipping container into a functional box. I haven't printed this but I would orient it with the hole in the container facing up and leave everything else as it…
Simple case for sending out trading cards in a toploader. Default depth of 7mm is good for one toploader plus a 1mm foam piece on each side for additional protection. Adjust depth and re-render in open scad as needed.
A simple stamp I designed to allow you to cover sensitive information on your delivery boxes!
N scale Shipping containers that are designed for FDM Printing
Known as drill bit tubes, storage tubes, shipping tubes. Use them to protect long, thin objects for shipping or storage. Prints on my X1C for a perfect sliding fit that's easy to extend and retract, but won't fall out. Comes in a variety…
Summary: This is a simple, functional mount I designed to hold my JADENS Bluetooth Thermal Shipping Label Printer and a spool of MUNBYN Thermal Direct Shipping Labels on a MultiBoard setup above my desk. It keeps my shipping setup…
This 3D-printable shipping container is designed for tabletop games like Warhammer 40K, Infinity, Stargrave, and other 28–32mm systems. It’s a clean, functional piece of terrain that prints in one piece without supports. Whether you're…
Protective (in theory?) carrier for AMD SP6 socketed chips. There is slightly excessive slop on the bottom half, could probably benefit from a few millimeters added back. How do the two halves connect? you might ask, well, use some tape.
Adapted the original model to the Lego Duplo dimensions. There are several dimensions, 4x6, 4x8, 4x10
I love the design by SevenUnited and figured the only way it could be better is if I could store other stuff in it like scatter terrain. The clip part of the design is from thing 6778096 on thingiverse. I've been printing the doors…
Free Shipping is one of my favorite BattleBots. I made this because there were not any official toys of Free Shipping. This toy version is based on its design in WCIV. The wheels and axels are press fit and the orange pieces are glued on.…
I wanted to send some minis but didn't have a small box, wanted something I could add padding to and didn't want something flimsy that'd be easily crushed so I came up with this. It could be a nice little carrying case too. The lid isn't…
Bracket to utilize the shipping brace as a handle for the Roly Lasermatic MK2. It uses existing factory mounting locations, but with slightly longer M3/M4 screws. I did have the drill two holes in the acrylic for the lower/inner screw on…
Just screw it into your wall with your choice of the screw holes, then pop your scale display into the bracket. Use an Ethernet cable (and a female/female Ethernet coupler, if your scale display's cable doesn't detach on both sides) to…
Hardware used: https://www.amazon.com/dp/B0DTHB9HQ2?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 https://www.amazon.com/dp/B0B2PJV38X?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3…
שילוח הקן - קן יונים - Nest shipping - pigeon nest (birdhouse) שילוח הקן – המצווה, שכרה הלכותיה מצוות שילוח הקן – שילוחה של האם הרובצת על הבנים – היא מצווה הזוכה למעמד מיוחד. אמנם קיום המצווה הוא דבר נדיר יחסית – עבור רובנו פעם בכמה שנים,…
I buy and sell a lot of Gillette safety razors. I designed this block to allow me to secure the razors to safely ship them without worrying about them getting damaged. I've used it for Fat Boys, Slim Adjustable, Ball End, Flares, long…
Please scale down if it requires a lot of filament. Finger joints should fit but don't sue me if they don't
I created this to organize the packing supplies I use to ship out cards that I sell. This design makes the process a whole lot easier. I designed this after not finding anything that met my needs. It holds two packs of Team Bags, 50 Top…
I designed this based based off a cardboard one I made a couple of years ago. when being sliced make the bottom 5 layers. Paint some manual supports for the door handles. I printed with no other supports and it printed pretty well. I'm…
The locals call 'em 'Cycle Coffins' because, in this world, things go in, but they rarely come out in the same state. These crates are the backbone of the Docks - stacked high enough to block the sun and heavy enough to crush a Hauler.…
Ship your DIP chips (300 mil) up to 40mm long (think the footprint of a 555 Timer, but much longer) without damage. Simply put your chip in here, place the cap on the end, and throw a piece of tape on it. Unbent or bent leads should fit…
this is my model i made of some shipping containers, i am still redesigning them but if you want to remix it, i have the step files there as well. but make sure not to publish to makerworld.
Efficient 4-part thermal label stand with 608 bearing rollers. Fits rolls and fanfold stacks. No supports required! Description: Upgrade your shipping station with this heavy-duty Thermal Shipping Label Stand. Designed specifically for…
This is the latch for attaching the handle to the Prusa printer shipping box I lost the box handle from my Prusa printer box and was able to reprint it thanks to @Pokohui. Unfortunately, I was missing the latch to attach the handle. A few…
This is a simple DDR4 RAM guard to protect a desktop memory module during shipping or storage. The RAM stick fits into the tray and stays in place. It helps protect the PCB and the gold contacts from damage. Made for standard DDR4 desktop…
Shipping container set with 4 different sizes that can be all combined and stacked. Should be printable without support.
Tanks in a shipping container format. It has the same sizes as my previous shipping containers and works with the same grid system and can easyly be stacked into large piles of containers.
Printing Instructions To achieve the intended look of a miniature cardboard box and a wooden pallet, printing with Wood PLA filament is highly recommended for this project. The natural texture and color of wood filament perfectly…
Sizes in 0,1 inch - number of pins WIDE. Scale your model height to your board length. Example board with : 7u: Arduino pro micro, Arduino Leonardo, Arduino Nano, Teensy 4.0 11u: ESP32 DOIT DEVKIT, Additional caps for securing, adhesive…
This model has been specifically optimized for 3D printing to ensure clean lines and zero frustration. Unlike other over-engineered models, this pallet features a completely flat deck design that allows you to print it upside down with…
Shipping protector for wheels and hubs with 10mm solid axles or 15 mm thru axles. The fit should be tight enough that you need to thread the protector onto a 10mm axle, but should go on easily. It should have a very light press fit into a…
This is a simple Pokémon Single Card Shipping Container I made for my own card shipments. A sleeved card fits inside, and I already tested it by shipping the card shown in the photos. It arrived safely, so I decided to upload the design…
This model has modular inners which can be modified to fit any 28mm mini or you can just have the mini loose and it will still protect from being squished
Produced with the awesome support from my Patrons! Here is my take on a futuristic shipping container. It can be used to ship medical supplies to Eros, or ammunition to Armageddon. An added feature is automatic atmospheric control keeping…
Low profile, easy print shipping holder for top loaders. Prevent bending or flexing of your cards in transit by shipping them supported in the case. Designed to hold 3" by 4" top loaders. Can fit 2-3 max per case if needed.
This is a dual-color "Fragile this side up" sign because I urgently need one and I don't have a sticker. Add a filament change command at 0.6 mm when printing this sign. Start printing with white, then switch to red filament after 0.6 mm…
This one has been on my list for a while. The shipping container terrain I releases a few years ago for Gaslands was part of the reason I started my patreon. After Gaslands Refuelled was released I kept meaning to update my containers…
Hi There. Some time ago I was looking for a model of a shipping container with a sliding cover, but couldn't find any I liked, so y made one myself. The print you can see is at 60% scale of de model. Anyway, I made the model in Fusion 360…
Programs used: Onshape Dimensions: approx. 8 x 8 x 8 cm Printer used: Craftbot Plus Pro Design by Alle43221
