Counting matching models…
This was modeled off of a 1995 Suzuki Sidekick and should fit any vehicle with a similar dashboard center bezel. Some of the parts fit tightly and will need slight post processing. This was done to ensure everybody could print this even…
DESCRIPTION Much thanks to the creators of Honeycomb system, and the Flashforge Enclosure, for making this remix possible, the links are included in this profile. Codename sidekick is ready for unveiling. All pieces are printable on the…
fortnite sidekicks are now a house hold idem
About I'd been rolling around ideas on how to design a SideKick for the 4 nozzles on each side of the Core One INDX design. I started working before release by using various photos and video stills to guesstimate certain measurements. As…
Designed from scratch with no extra hardware needed. Designed to fit on the Bambu X1C bed size. Uses a decent amount of filament, bed adhesion for the main body has to be really good for it not to lift. 3D printed gyroscopic can/drink…
Halo infinite Sidekick From Microsoft eventual new halo game. This thing is full scaled is roughly maybe 70% game accurate at the time of this post. It does not feature any moving parts; however, I'd like to make one eventually once I…
Please note the license for this design! It does NOT allow for commercial use. This case is designed to fit version 0.41 of the Sidekick64 cartridge for the Commodore 64 and a Raspberry Pi 3B+. Additional material required: 4 screws…
Please note the license for this design! It does NOT allow for commercial use. This case is designed to fit the short version of the Sidekick64 cartridge for the Commodore 64, made for the Raspberry Pi Zero 2. Additional material…
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
A case for the Sidekick64 cartridge based on a Raspberry 3A+ This case is based on the original 3d design which is available at the Github page of this project but was built for the larger version of the Raspberry 3 I'm still working on…
Compatible with the first gen suzuki sidekick and geo tracker. Only tested on my car. Mirror in slicer if you need the drivers side. Profile has been modified to be stronger than OEM. Make sure to consider your material and infill. The…
Easy, convenient, and FAST filament loading for your Genuine Prusa XL! Just insert the filament into the sensor and past the loading gears then press the associated paddle to simultaneously provide clamping force on the filament and…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Leatherman Sidekick Belt holder in PETG. This is for the sidekick and sideways belt loop.
Compatible with the first gen suzuki sidekick and geo tracker. Only tested on my car. This is a large piece so you will have to cut it in your slicer and print in multiple parts. I used superglue to attach the pieces, acetone or an ABS…
Replaces a knob on a guitar pedal for easy, on the fly turning by using your foot. There are 3 files for different knob shaft types: K Type - Knurled texture O Type - Smooth Texture D Type - Smooth but one side of the shaft is flat like a…
The knife is 2mm strong, the saw 0.8mm. I wanted the additional height of the thumb buttons to be subtle and not super thick. I opted for one millimeter. You can adjust the parametrized Fusion 360 file in case you would want more…
In the shadows of the night, the Bat Duck rises. Cloaked in dark tones and sharp contrasts, this multicolored split model captures the essence of a vigilante who watches over the city from the rooftops… only in duck form. The design is…
This is Honeycomb C, I fixed the orientation so it will fit correctly with the other shared remix. The thick side of the honeycomb wall is supposed to face outward, not inward.
This wheel center cap is a replacement for lost or damaged plastic caps that came on Suzuki SUVs, loosely based on the factory appearance but having a 1 CM hole in the middle to use an emblem of your choice, either one that I have remixed…
Simple push-fit Multiboard holder for the Leatherman Sidekick and the same-sized Wingman. It may fit the Rev, though I don't have one to try. Intended to be printed upside down without supports.
Popular WiFi measurement device desktop stand Originally conceptualised for holding the Ekahau Sidekick in position while recording RSSI values for comparing against target device x, y, z. Notice the cut-outs in the struts? They are for…
DESCRIPTION These are files for a 3D printed model rocket that I designed. The rocket has not been flight-tested. However, the pieces seem to fit together nicely after a little sanding and filing. I designed it to also print easy and so…
As summary states its just replacement vent fins. I made mine in ABS and they work fine.
Leatherman Sidekick/Wingman Gridfinity Module This 3D printable Gridfinity module is designed specifically to hold your Leatherman Sidekick or Leatherman Wingman multi-tool. With a precision-fit compartment tailored to the dimensions of…
correct numbering order for the FFC5
Hello everyone! This is a simple little storage tray that can hold the Sidekick notepad under your desk along with an easily retrievable pen. The pen holder is designed to let a centimeter stick out to be easily grabbed. The main tray is…
Ducto de acople para toma de aire de Suzuki Sidekick con snorkel, fabricado en PLA-f, al ser toma de aire el ducto se mantiene a temperatura ambiente Altura de capa: 0.2mm Relleno: 100%
The Keybak Sidekick is a high quality alternate tensioning device for users in USA - it's ~$10-12, and available on amazon for quick delivery. The Sidekick will work fine with the stock rectangular holder, but will sit funny, and I just…
My Roku remote adapter for the sidekick remote control broke.. And I can't find the adapter being sold separately anywhere.. So I took LiveFromNewYawk's design for chromecast remote and made it for roku remote. This is made for Roku…
NOTE: I am still working on the RAMPS 1.4 config file with Marlin 1.1.0. Currently the printer does move around and extrude slowly, but not print worthy just yet. Testing parts to upgrade my 101hero from its gear reduction steppers to…
I needed a way to easily remove and replace my paints for storage. This fits the ArtBin Sidekick 8408AB craft box and the SCAD file can be easily tweaked to create any sized rack. The rack prints in two pieces with divots where the posts…
LG SideKick Handle Replacement This handle commonly breaks, so I designed this part to replace it without having to replace the entire door. The original handle breaks very easily, which makes this a frequent failure point. This 3D…
Introduction I love the incredible SideKick filament loader that @MrFlippant designed. However despite my best efforts to source the specific DC 12V 1000RPM geared motor listed in his build guide for the direct drive I wasn't able to.…
I took the awesome spool holder design by Dereksunday and modified the mount to fit the new Sidekick. It still has the guides for zip ties as well as holes for mounting with screws. Category: 3D Printer Accessories
Magnetic add-on compatible with the current character tray
Even Batman needed a Side Kick, why not the Prusa Box Different widths included. Use mirror to make the one for the opposite side. Let me know if you need specific dimensions as I made it to fit my environment.
(The most up to date version of this project will live in my GitHub repo .) The Intent I love the Sidekick Notepad . I love the way that it lays out. However, I had some issues: When I have it below my keyboard, my keyboard is too flat…
You can scale the model up based on your preference, I wouldn't recommend scaling it down as supports might be hard to remove (YMMV) Settings I used in Orca Slicer Quality Variable layer height Resolution - 0.008mm Ironing type - All top…
Updated the sidekick cards so they can hold action tokens and accommodate Iron Bear
Suzuki Vitara / Sidekick Double Din 2Din side plates Not for a Double Din Radio, but for using TWO single Din 1Din units
I made this for my 1997 Suzuki Sidekick which was missing the shift knob. Not sure what the crossover is but if your shaft is 14mm, this will fit just fine. It's a solid friction fit on mine. I printed it with the hole pointing down…
Covers Side-Box and Side-Kick-Box option. https://www.prusaprinters.org/prints/122767-sidebox-sidekick https://www.prusaprinters.org/prints/110699-side-box-prusa-i3-mk3s-left-right
This is for the rear plastic bumper on 89-98 Geo trackers or Suzuki sidekicks. My bumper guide on one side broke off so i designed this, it might be a bit tight but it works. No pictures of it since I printed it off and put on my car.…
This is my original model I called it iron man's little sidekick because it sounds cool. You can print him and scale him however you want just make sure to use supports. Thank you for downloading and have fun! Update: While printing I…
Morty Zombicide Fais sur Nomad Sculpt TableTop édition FanArt Pre-Supporté 32mm Socle : https://www.printables.com/model/1701671-base-28mm-32mm Cadeau de donation sur Ko-Fi Autres liens : Pinterest : https://pin.it/3WuBRdGWm Cults :…
I made it a bit more tidy for a DC Power Jack to be added to the SideKick. There is a notch to secure it to the DDR_Bottom and another notch for wire routing. Enjoy!
My Suzuki Sidekick has blanks that were old/ugly/missing so I modeled new ones. Considering that the temperature inside automobiles can get very high, I recommend printing these out of ABS or ASA. They press-fit into the hole. Print with…
modified model that perfectly fits into the sidekicks , original model fits only on the naked rails. This one has also overall bigger top to cover the bigger holes on the sidekicks
I was looking forward to the Sidekick model from MrFlippant. Since I was using 6mm tubes on my XL, this was going to need modifications. I also included the bottom parts with spaces for brass inserts, since I was disassembling them many…
Mashed this dynamic duo together because the superhero with the Allen key made me think of a shepherd. Thus was born the dynamic duo, Shepherd Joel and Fluffy!
Made this to 'sidekick' for an existing model for rackmounting HP Elite desk mini's ...sorry only the right side :/
PRINT THIS OUT OF TPU! Wanted a way to add a PVS-14 protector to the ocular of an Armasight Sidekick 640. Used a Nocturne Onyx filter and now the image is even darker (and pinkish-purple), which I have liked while bridging with night…
When I originally received this game from Kickstarter, I immediately sleeved all of the cards with the provided sleeves from backing the project. Once I tried to put everything back in the original insert however, the cards wouldn't fit.…
This spacer is helpful to place the display of an Sidekick64 with the correct spacing to fit inside the Sidekick64 Cartridge Case by bigby: https://www.printables.com/de/model/122968-sidekick64-cartridge-case The spacer by JustinC144 is…
This spacer is helpful to place the 4 THT LEDs of an Sidekick64 with the correct spacing to fit inside the 4 LED Sidekick64 Cartridge Case: https://www.printables.com/model/1648440-sidekick64-cartridge-case-4-led-holes-and-closed-j The…
Wire spool holder for Worx Sidekick work tables, fits into the holes and will accommodate 1/2" EMT conduit. Easy print, supports touching build plate for the through-table peg. 2 walls, 20% infill, PLA is sufficient. Category: Tools
This is a model of LulzBot's TAZ Sidekick printer Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Doesn't Matter Supports: Yes Category: 3D Printers
This is a remix of the upper side of the nice Sidekick64 Cartridge Case by bigby. I have added 2 more holes to see all 4 LEDs. Further I have closed the jumper holes at the front. Since I use my Sidekick64 only with a C64 I saw no need to…
After fiddling around the model (35 versions or something) and 3-4 different magnets, i can confidently say that, this version satisfied me 100%. Parts fit the joystick friction fit. No cuts, no holes all reversible. Friction fit depends…
Tether for the Sidekick 640 Battery Cap Print in TPU
I plan to mount my INDX filaments to a Skadis pegboard with some drybox adapters. I don't want to run filament all the way to the printer, so I want to put the Sidekick on the Skadis as well, hence the model. I added a bucket for a 9V…
Do You Teach TKD Alone Or Do You Have A Good Sidekick
Uses 5 15x3mm Magnets I printed mine with Fuzzy Skin on the sides to hide the layer lines.
Why I Made This MOD I have to give huge props to the original Inomata-K Mk2 design, especially for its shaft and lock system . It's precise and secures everything so perfectly. As someone who loves to DIY filament boxes, I naturally ended…
This allows mounting a SideKick or two to a Voron 2.4 or Trident, for use with Bondtech INDX. All other files and documentation can be found at the original SideKick this is remixed off of. This was put together with the intention of…
Sidekick of dj music man in the mega pizzaplex
This is a replacement burner knob for the CampChef Sidekick propane burner. I had tried other knobs available but each kept breaking after a short time. This is designed to be printed in ABS or ASA with 40% infill (minimum). I typically…
Super simple remix of @JimNagano's super useful frame, to fit the 8mm plugs I had at hand.
NOTE: I highly recommend inserting a folded piece of paper into the stand to protect the phone's silver finish, which is likely to get scratched if you frequently take the phone out of the stand (mine is scratched because of this).…
Why I Made This MOD I have to give huge props to the original Inomata-K Mk2 design, especially for its shaft and lock system . It's precise and secures everything so perfectly. As someone who loves to DIY filament boxes, I naturally ended…
You can scale the model up based on your preference, I wouldn't recommend scaling it down as supports might be hard to remove (YMMV) Settings I used in Orca Slicer Quality Variable layer height Resolution - 0.008mm Ironing type - All top…
LG SideKick Handle Replacement This handle commonly breaks, so I designed this part to replace it without having to replace the entire door. The original handle breaks very easily, which makes this a frequent failure point. This 3D…
Easy, convenient, and FAST filament loading for your Genuine Prusa XL! Just insert the filament into the sensor and past the loading gears then press the associated paddle to simultaneously provide clamping force on the filament and…
I made it a bit more tidy for a DC Power Jack to be added to the SideKick. There is a notch to secure it to the DDR_Bottom and another notch for wire routing. Enjoy!
After fiddling around the model (35 versions or something) and 3-4 different magnets, i can confidently say that, this version satisfied me 100%. Parts fit the joystick friction fit. No cuts, no holes all reversible. Friction fit depends…
Introduction I love the incredible SideKick filament loader that @MrFlippant designed. However despite my best efforts to source the specific DC 12V 1000RPM geared motor listed in his build guide for the direct drive I wasn't able to.…
This is a remix of the upper side of the nice Sidekick64 Cartridge Case by bigby. I have added 2 more holes to see all 4 LEDs. Further I have closed the jumper holes at the front. Since I use my Sidekick64 only with a C64 I saw no need to…
This spacer is helpful to place the display of an Sidekick64 with the correct spacing to fit inside the Sidekick64 Cartridge Case by bigby: https://www.printables.com/de/model/122968-sidekick64-cartridge-case The spacer by JustinC144 is…
Do You Teach TKD Alone Or Do You Have A Good Sidekick
DESCRIPTION Much thanks to the creators of Honeycomb system, and the Flashforge Enclosure, for making this remix possible, the links are included in this profile. Codename sidekick is ready for unveiling. All pieces are printable on the…
Thanks to breadbaker for the original model. This version does not need supports when printing, but use of brim is highly recommended.
Easy, convenient, and FAST filament loading for your Genuine Prusa XL! Just insert the filament into the sensor and past the loading gears then press the associated paddle to simultaneously provide clamping force on the filament and…
"He’s small, he’s fast, and he hates getting called a 'good boy'!" Add Dick Tracy's sharp-witted young partner to your collection with this high-fidelity, static-pose figurine. This model is a definitive tribute to the classic 1990…
Uses 5 15x3mm Magnets I printed mine with Fuzzy Skin on the sides to hide the layer lines.
This is a remix of the lower part of the Sidekick64 Cartridge Case by bigby. The bottom part is divided into two parts to avoid supports and thus get a better surface. The parts can be easily put together without the need for additional…
