Counting matching models…
Lord of the Ring - The One Ring dice bowl by Skar84 - Thingiverse This is a reupload because of course thingiverse is so broken the page and file is gone AND you cant even log in anymore. All credit goes to Skar84
Whipped this up quick in fusion360. My take on the Beskar bar in The Mandalorian.
A beskar brick wallet I remixed from a couple of other designs. I use it every day!
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
The Mandalorian beskar armor left arm (whistling birds). The model is based upon on-screen pics and it is not very accurate (I haven't been able to get quality pictures of it). UPDATE: Uploaded new "electronics friendly" version (V23). It…
This is a digital 3D printable model of Mandalorian Beskar Spear . The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed…
The Mandalorian beskar armor right arm (flamethrower). The model is based upon on-screen pics and it is not very accurate (I haven't been able to get quality pictures of it). UPDATE: Fixed wrong surface on right attachment. UPDATE: Fixed…
Beskar Ingot: Mandalorian: Star Wars Print standing upright for best details. Textured on all sides.
⚫SKARO DALEK⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every Saturday! And…
Display your prized Mandalorian Black Series helmet with style and flair using this Mandalorian Bag Symbol inspired display stand! 🎁 Perfect Gift for Mandalorian Fans: Whether you received the Mandalorian Black Series helmet as a gift or…
The Mandalorian beskar armor shoulder. Modeled from scratch based on on-screen pics. Use two glued elastic bands to secure it in place, the lower one around the arm and the upper one around the chest. UPDATE: Remodeled the shape to better…
Printed this in Prusament PCBlend so that it doesn't deform in my garden shed in summer. PETG should also be working, though.
Here's my attempt at a Beskar Ingot from the Mandalorian. Scale it 150% percent. Post a make and check out my other files Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament:…
Holders for axe and Fiskars Xsharp™ knife sharpener. Tested with axe X10 and X17.
Easy to print no supports designed as a cake topper for a star wars fan.
Wenn sich nach einiger Zeit der automatische Auslösemechanismus nicht mehr funktioniert, muss die Feder im Inneren nachgespannt werden (Vorsicht). Das hier bereitgestellte Werkzeug kann mit einem großen Schraubenzieher genutzt werden, um…
This is an organizer that both stores your game and helps set it up on the table. Skara Brae has a ton of cool wooden pieces, so sorting through all the baggies constantly was getting tiring. The card holders should have plenty of space…
I cut the base off of the Glock display and replaced it with the Mandalorian Ingot. Printed fine and locks in like a magazine. “Weapons are part of my religion” - Mando
Mandalorian Beskar coaster and action figure stand.
This hook will allow you to put your shovel or pitch-fork on a wall safely till next time you'll need it. I made it, so I could hang the snow shovel till next winter. The hook wide enough (90mm), so the shovel will stay in it's designated…
designed for a dual skar 6.5 setup on a 3800 box
Keep some Beskar in your pocket with this Mandalorian Beskar keychain! This was printed with silk PLA. Print at .20mm layer height and change filament at layer 2.20mm. Happy printing and this is the way!
Taking inspiration from the iconic Fiskars scissors with orange handles, I did a Fusion360 cad model as I broke the handles by accidentally dropping my scissors on the floor. It is not like the original, but brings the scissors back into…
Print in 0.15mm or 0.1mm at slow external and internal perimeters (10mm/s). Finish with a base coat of gloss black and paint with a silver finish. Make sure all the layer lines are filled in first with Bondo or a filler primer and sand…
Sag Tschüss zu den Eisschichten auf den Scheiben.
⚫ Skaro Dalek 1960s⚫ This is the last model for the year 2024. Expect a new models in 2025 Follow me on YouTube for more info about what you can look forward for. :-) ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can…
Wearable sheath for the Fiskars X7 hatchet. Can be mounted to Tek-Lok style belt clips. Mounts facing forward on the left, mirror parts for right. Two mounting styles: fixed or pivot. Pivot can spin around on the belt clip, fixed cannot.…
All prints are oriented for best placement. I used PETG but any filament should work. I used a .3 layer height but again you can print in finer detail if desired. Happy printing!
Mandalorian Paperweight... because, why not!
I was looking for a Fiskars hobby knife holder for #gridfinity but couldn't find one. So I remixed kaspertulstrup's x-acto knife holder to fit the bigger Fiskars version. Gridfinity is the ultimate organizer for your whole workshop! Zack…
🇮🇶 مرحبا بك في العراق Welcome to Iraq This model was designed by Faiz Kamel @churnwalker21 Al-Askari Shrine , the ' Askariyya Shrine (Arabic: مرقد ٱلإمامين علي ٱلهادي وٱلحسن ٱلعسكري, Marqad al-ʾImāmayn ʿAlīy al-Hādī wal-Ḥasan al-ʿAskarīy…
Prints in two parts, where they can be glued together. I screwed on the bottom part upside down on the PVC Riser first, then applied superglue around the rim and screwed down the top part. I kept the screwing motion going while the glue…
A Remix of this Beskar Easter Egg optimized for Vase Mode
PLA 0.2 Printed on MINI. 2025-12-12. Version for 200mm.
Handgriff für eine Astschere L99 Fiskars, Ersatzteil für den Handgriff Handle for a L99 Fiskars loppers, spare part for the handle
Small covers for the commonly used (7/16" EU) threaded propane/butane camping canisters and stoves. Protects the threads from dust and dirt. Print with a small layer height of 0.08mm.
This is a remix of Oskar's Cube from TautologicalRecursion. Run the rods from the circle to the square in the maze. The original cube was too big for my taste and the rods do not slide properly in the maze. Therefore I've scaled…
This prints as oriented. Max bridge length is ~10.5mm, and the tolerances include this bridging. Sheath is just the right kind of snug! the orange one has a bit of holofoil laminate on it 😎
I needed a place to mount my ZWO ASIAIR on my ZWO FF65 APO, same type as the Askar 65PHQ. The original CNC machined part is expensive and hard to get. Other 3D-printed alternatives were sold for exorbitant prices, so I started to design…
A model of a Beskar Ingot from Star Wars. I'd recommend printing it in silver and then painting the details with black acrylic paint. I printed the ingot in one piece without supports. To get a better surface on the bottom, it can be…
I wanted a holder to put my two most used cutting tools in one place. This was designed to fit the “AFA Tooling” deburring tool ( Amazon link ) and Fiskars clone of xacto knife ( Amazon link ). I find the Fiskars version more comfortable…
The Fiskars X-series ultra lite axes are great for hiking and their smallest X13 model would make a perfect emergency axe if the empty handle could be used for storage, this cap does just that! It is made in two versions, one hollow with…
I tried to find a nice case that would nicely (and safely) hold a hobby knife, because the original cap just seemed a bit flimsy. Couldn't find one, so I made my own! Also as a bonus, the case holds a spare blade box. The knife is about…
When using the Dew shield I used Black Velour Flocking see link to self adhere onto the inside for a smooth close connection. I printed the parts with CF PLA as I liked the dull black finish.…
This is an accessory for Jacob Cardwell 's BIG BRICKS - Mandalorian figure. Please have a look at his awesome model. Printing instructions: The spear is easy to print. Just put everything upright onto the buildplate with a 5mm brim to…
to easily have it hang on the wall
Adjusted inner diameter for QuickFit extensions. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 30% Filament: Does not matter PLA, PET-G Category: Household Supplies
Nothing too fancy, held on with double sided tape on the side of my desk for quick access. The part number on my snips are AA0620.
Handle for Fiskars replaceable tools. I printed from ASA in two parts (A and B) and glued. SW x2 nozzle 0.4 layer 0.2. You can print with Petg, it should also withstand. A slight cut can be needed on the handle. Fastening to the nit.
Scientifically accurate model of a halzskaraptor. The model features high-poly feather and scale texturing along the model. I recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take…
https://youtube.com/shorts/XhEza27AbTo?feature=share print the model standing up! some of those tools I know it fits: Hedge shear HS52/53/72 Loppers L32/70/77/74/31/78 tell me if you know more models! added a clamp that fits the L5532
Repair Kit for the use of cavity wall boxes in plasterboard if the hole was too large or the edges were broken out
Introducing a 3D printed hook specifically designed for the new IKEA GRILLSKÄR back panel, taking your outdoor kitchen organization to the next level. While the panel comes with a two hooks, the need for additional hooks might be needed…
Printed with Prusament ASA, 5 perimeters (fully filled walls), adaptive layer height. Wall thickness is 3.5 mm. Bottom plate geometry is shown in a picture. Tested with telescopic handle L.
Holder for fiskars tool attachment
A hook board that is designed to hold a set of Fiskars hand garden tools, the hooks are shaped specifically for the design of hole in the handle that this Fiskars set has. Print Settings Setting Walls 2+ (I used 6) Layer Height 0.2mm…
Mount for holding three small gardening tools where the hole for hanging the tool is greater than 1 cm in diameter.
This is a remix of the "Beskar Ingot with Damascus Pattern": https://www.thingiverse.com/thing:4038610 I remixed it into an external USB 3.0 SSD case. It should hold any standard SSD, up to 7mm thick. I used the USB controller from this…
Update --------- ___ easy to print ___ Garden hose water sprayer holder for irrigation. A tripod stand with adjustable angle or alternatively a simple bipod stand. Simply clamp the hose coupling into the hose holder to irrigate your…
I recently bought Fiskars detail knife , but the protector it came with can fell off and wear down with time. I decided to use my leftover magnets from previous project. The magnets hold the case closed and holds the tip in place as well.…
Concepto del diseño Skarlet Chibi es un modelo con estilo de arte chibi que presenta un personaje con una apariencia misteriosa y armada, ideal para los amantes de los juegos de rol y figuras coleccionables. Uso Esta figura es perfecta…
Thanks to TheMADEngineer for his design, which looks like it solves a similar problem. I was not happy with my original design however so used the sprinkler pattern from his model, scaled to fit. The square hole to one side is because the…
Inspired by: https://www.thingiverse.com/thing:5359910
An arcade sequel to Thayer's Quest (which is what a few Dragon's Lair cabinets were converted to back in the 80's), Kingdom II: Shadoan had a few minor items to collect throughout the often confusing and sometimes incoherent journey that…
Printed in PETG/0.2/20% infill. I printed mine laying on back with supports, but should be working with bottom on the plate.
Lifting pad / riser block with notches designed for the stock Vixen dovetail and rings on the Askar 71F Flat-Field telescope. Effectively raises the OTA by 7.4mm which provides enough clearance so that you can slide the dovetail under…
Ikea BÅTSKÄR leg reinforcement to be able to mount wheels and hold the weight of a gozney dome. The video probably explains best how it works: https://drive.google.com/file/d/1EPvcd3F1K8oWjecm6nUqga08nSA9Reul So far everything holds quite…
A simple rail that attaches to the tube rings of an Askar FRA400 refractor telescope. The rail mounts to the rings using M6 screws. The center holes are designed for 1/4-20 or M6 screws and hex nuts (11.5mm between flats) whereas the…
This isn't the prettiest model, but it is functional enough to solve my issue. I didn't like that the Fiskars thread snips I use for sewing lay in an always open state, apparently newer models now have a closure mechanism. I designed this…
Alright, you mugs, listen up! You're thinking of betting against Huskarl Valdis? Look at her. Her authority isn't from some dusty god; it's forged from a million paid contracts, melted right into that magnificent armor. She doesn't fight…
Small stand to put my mandalorian beskar on my desk, mine was purchased from etsy at the following link https://www.etsy.com/listing/1027418627/full-metal-hunters-ingot-weighs-nearly
I designed this for my kid to play with. Having no clear references I tried to replicate what I have seen in images over the internet. Have fun.
Remixed https://www.printables.com/model/125570-bar-of-beskar-from-the-mandalorian by cmazz.
“Every society has something to offer. The cloners. The Jedi. And even the Mandalorians. By aggregating the best of each, I will create an army that will bring order to the galaxy” - Moff Gideon Introducing the newest member of the…
For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…
Simple hook that allows to hang backpack or bag under the desk, in hands reach. I suggest printing it with supports on build plate, in orientation shown on a screenshot.Mine is printed this way in PLA and it works so far, even with heavy…
Prevent charging cords and other cables from sliding off your desk with this handy cable clip, designed to fit a 22.5mm thick desk like the IKEA Skarsta. This is a remix of a cable clip originally designed for the IKEA Gerston desk. If…
Air Tag luggage Tag made of Beskar. Category: Gadgets
An FDM friendly OEM compatible gameboy pocket front, featuring a beskar pattern and empire speaker grill, with a built in bracket for funnyplaying IPS displays and gameboy color and gameboy pocket button compatibility. If you make it,…
I have several of these snips and they work great… except the lock wears out overtime and they keep popping open. A quick run at a replacement part and here it is. I made it a bit snug and it works well. One end is flat so that it can…
Replacement clasp for Fiskars bypass pruner. Printed from PET-G, 0.15 mm layer height. If oriented as shown on attached picture, supports are needed only for bottom bridge. PLA should also work, probably with better overhang performance,…
The cap that came with my knife allowed the tip to extend past the top of the cap, usually right into your finger. I created this replacement and included a reminder that the #11 hobby knife only allows us to use it with the required…
Ring that holds the hood of an Askar FRA400 refractor telescope in the extended position. Requires a 10mm or longer M2 screw and hex nut. Without the screw, the ring is flexible enough to be passed over the hood.
The Fiskars Hardware (21cm) scissors are a bit wider and did not fit well in the original holder. I made the opening 20mm to make the bigger scissor fit well. Print Settings Printer Brand: Creality Printer: Ender-6 **Supports:** Yes…
I have had these for 20 or so years so and the clip broke 4-5 years ago so I finally got around to replacing it. This is a modified from the remix to fit this exact model not sure if it would work on other models. I of course tossed the…
Customized version of https://www.thingiverse.com/thing:16627 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: teeth = 104 profile = 12 motor_shaft = 61…
Easy to print easter egg
The hand grip is printed with ASA and is smoothed with aceton by spraying. I have used spraying to finish only outer surface of the hand grip, because warping is lower if only partial surfaces are smoothed. The hand grip works also fine…
Iconic Movie Characters - Schindler's List - Oskar Schindler & Amon Goeth - 1993
Simple prints. I cut (with a small chisel) a slight notch on both sides of the original snips to allow the new clip to slide into place. The clip is direction both left-to-right and top-to-bottom.
Vitesse maxi augmentée de 80 km/h si imprimé en rouge.
BESKAR STEEL BUMPER CASE FOR FLEXIBLE FILAMENT ONLY use Concentric as the initial layer pattern I used the already well-designed Adafruit bumper case as a starting point, as I saw no need in redesigning something good and I wanted to…
Fiskars manufactures a line of tree pruning tools with extendable reach and a pull string operated pruner. They are popular and effective pruners and a good value. However, the pull string has to be long enough to function at full…
![Doctor Who - Post Time War Dalek [2012] ★SKARO DALEK★](https://media.printables.com/media/prints/75799/images/7871489_a41a8051-5d2e-4fd8-99e1-5c8b16749666_987f6701-daaf-43a1-8701-4326e696a9f1/gg1.png)
![Doctor Who - SKARO DALEK [1960] by-MrHan/24](https://media.printables.com/media/prints/1037308/images/7871476_6d896f49-631f-4067-9ed8-b586fbb3b4c0_627546ca-fea3-4aa7-856b-eb81ec1bbc75/gg-6.png)
