Counting matching models…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
This is a remixed version of the excellent cord spool from Stubbsie to use it as a camping/travel clothesline. I added a hook to the shell of the spool and designed an another hook for the cord end. Printing Print in PETG or ASA/ABS with…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…
Description I was replacing the clothesline with a new rope but the old tensioner was rusty and wouldn’t work. This is the replacement that can be used with up to half inch (12mm) rope. You may need to manually rotate the cams to lock…
Really love all the various sock clip remixes, adding one more that hooks onto a clothesline instead of a drying rack. Should be much easier than fiddling with clothespins for drying socks outside. Originals provided by @ Bike Cyclist and…
The mechanism of tension of the clothesline (rope). This works with a clothes rope in a polyethylene sheath with a diameter of 2 mm. The turnbuckle mechanism with two opposite threads allows periodic tightening of the stretching rope over…
Heyho :) After several clotheslines have already broken because they were previously simply knotted to the hooks / eyelets, I have a small 3D printable alternative for fastening: Advantages: The main load of the clothesline is no longer…
This wire holder is designed for a wire with a diameter of 2.5 mm and a base frame with a diameter of 14.5 mm. Printed with 50% infill. You are welcome to change the stp file according to your measurements. Or you write down what…
This compact, print-in-place clothesline clip is designed with a cam-lock mechanism that provides a strong grip on clothes and the line. Unlike spring-based designs, the cam mechanism should help minimize creep over time, making it more…
This handy tool was designed to quickly and effortless tension a clothesline while being out on a camping trip. Simply put the slid over the line and start winding until the desired tension is reached. Afterwards, the tensioner is fixed…
Alternative when the towels are wet.😎 Alternative wenn mal die Handtücher nass sind.😎
So Happymodel Decided for the Bassline 2S to only release dimensions and not an STL File. The provided files are close to the dimensions of the stock battery holder. I use this for mounting in a little tightly: GNB 550mAh 2S 90C LiPo…
Small camping clothesline to roll up. I have attached a carabiner to both the eyelet and the line itself. The spool fits approx. 30m of paracord or similar cord. The following materials are also used: 1x ball bearing 608zz 4x cylinder…
Protection for frame and motor. Print in TPU there is two models to choose, the last one has more clearance between the TPU and the motor, it doesn't need supports. Remer to clean well and cut pieces of TPU stuck the inside walls, and you…
It is a holder that stretches the clothesline and keeps it taut. On the arret use a spring from the ballpoint. Use screws with a diameter of 3mm with a maximum length of 40mm for fix the cylinder. For the fix on the wall can to use screws…
Mit dieser Anreißlehre kann man bequem ein Maß einstellen und beliebig oft an verschiedenen Stellen identisch Markierungen setzten. Somit kann man Bohrungen exakt gleichmäßig anzeichnen. With this marking gauge, you can easily set a…
I made another version of the field for a compact chess set. Here, as in previous projects, everything needed for the game is collected in a small volume and the kit is completely printed on a printer. In this chess, as in the previous…
Functionality Description: The cord holder is a component of a ceiling-mounted drying system, allowing for the controlled lowering and raising of laundry rods. 3D model introduces solution by locking the cords in place, safeguarding…
ABT Sportsline GmbH brand keychain, with a simple and easy design for a quick impression and low material cost.
I have designed a simple screwable line tensioner. It consists of two parts. LineTensioner_Hook: designed with opening to be hung on the wall. LineTensioner_Thread: is screwed into LineTensioner_Hook. A hole allows to pass and to knot the…
Made in ASA for good UV and solar resistance. No need for supports. Easy to print.
Printing and Assembly Instructions for 3D-Printed Clothesline: Printing Parts: 1. Components to Print : 2 x Pole Connectors 2 x Base Connectors 2 x Stability Flanges 2. Printing Settings : Material: PETG for outdoor durability and…
This sock clips rack holds 9 pairs of socks (or 18 single socks) and attaches to a clothesline or the spokes of a drying rack. Also works with wash clothes!
The cap for our rotary clothesline foot from brabantia was broken, leaving a hole in the ground, With 2 small children around, this is asking for trouble. A simple functional design. What does what it should do without fuss
Summer is around the corner. At the Route 3D6 household we hang our swimsuits and towels over a 1in rack to dry. This clip helps the towels and swimwear from blowing away in the wind. I have included a fusion file for users to change the…
tried to find a solution to install a new (4mm diameter) clothesline after the former one had the plastic wrapping shredded due to punctual stress. the previously used tensioner applied pressure to a small point ripping the wrapping…
On my Hills Fold Down clothesline, the plastic clips used to tie off the wires failed after many years. This is an dimensionally-accurate model of my original clip, however there is a different version for current clotheslines…
Added a wider version plus a supported version to help fix and battery wobble
We bought a peg basket that had no way to hang from the clothesline frame. The metal handle wire measures 4.2mm in diameter. This hook fits snugly onto the frame so it doesn't come loose during strong winds. No need for any supports.…
A Spare Wheel Holder for the Upper Tray of the Electrolux Swissline Dish-Washer Printed in PET-G with 100% Infill, No Supports
Soap dishes don't need to be boring, so how about using one that hangs in the air...from a clothesline? This soap holder has a removeable grate in the bottom to allow the soap bar to properly dry while the reservoir at the bottom collects…
The orginal wall fastener was crumbling down, I drew this replacement in FreeCad. Printed in Prusament PETG + carbon fibre.
Holds folding clotheslines wings, fitted for 17mm rods
This is actually a remix of some sample filament spool I found, but can't find the source anymore. (If you do know where it came from, PM me!) One set includes a bearing hub where you can use any spool you want, it just needs adjusting in…
Choose 3.5 or 10.5mm version To mount: 4 x 25 mm wood screws Print settings: 3-4 perimeters 0.2mm layer height 30% infill brim Original design files:…
Support de corde à linge pour VW Caddy MK5, Ford Tourneo Connect (+2022), Ford transit Connect (+2022) (modèle imprimable en 3D). @Utilise une tige en bois ou en aluminium de 20 mm de diamètre. @Deux pièces imprimées permettent…
While trying to fix my old 80+ year old dryer my family needed a way to dry clothes without worrying about birds pooping on our stuff outside. The mounts were printed with a blue PETG with settings as follows: 3-4mm wall loops 40% infill…
Designed for 2s GNB 650mah LiHV batteries. The ones with an orange wrapper and flowers. Slightly bumper this away from the base plate as my flight controller has the motor connectors coming straight from the bottom, so I needed to give…
You need to print Bassline_battery_holders_14x18.stl Bassline_battery_holders_14x18 - version for tattu r-line 550mAh and GNE 720mAh HV Bassline_battery_holders_2x1s - version for 2 battieries (you need dummy connector)…
Ganchitos para colgar las perchas en la soga y aprovechar al maximo la soga para colgar la ropa impreso en 0.2 y relleno del 20% sin sopertes
[EN] This is a DIY retractable clothesline model, designed for robustness and durability. It utilizes a standard chainsaw pull starter recoil spring (or similar) as a powerful automatic retraction mechanism. Say goodbye to saggy and…
The tensioning handle on my Hills Retractable Clothesline failed after a few years of use. Whilst spare parts are available for just about every other part of the clotheslines, I could not find a replacement tensioning handle for love nor…
It’s an adapter to fit an ekey sline, maybe also an xline, into a 2N mounting module. I printed my surface mounting frame for the 2N IP Verso as well and wanted the same optics for mounting the ekey a little lower for the kids to reach…
Keep clotheslines spaced so laundry dries evenly. Nothing special but gets used almost daily.
A small 3D-printed holder designed to secure the end of a clothesline or rope. Easily mounts to wood or wall surfaces.
I designed an additional arm for the GIMI Modular 4 clothes airer because I broke one. It adapts to any tubular profile with a diameter of 16.5 mm, but if you download the Fusion360 file you can modify it according to your needs.
Some spacers if your a moron like me and wanna kneecap your bassline your gonna need some m1.4 bolts that are 5.5mm long (I haven't actually tried this because i don't have any bolts long enough)
If you have several long clotheslines next to each other, it can sometimes be nice to be able to hold them apart. For instance, I like to dry duvet covers, bed sheets or other large items hanging from the middle, one half on each side of…
HM Bassline&Mobula8 Storage Case
Update: Also works with the Trackit SR Have a look at my other design for the Trackit! Fancier WIP version:…
Replacement part for an clothesline slider. Print Settings Printer: Craftbot Plus (Pro) Rafts: No Supports: No Resolution: 0.2mm Infill: 100 Filament: Clas Olson PLA Notes: If correctly oriented no supports are necessary (see pictures).…
This is a support for a clothes line. use these as needed when hanging your laundry to prevent sagging. the pulley makes it very easy to move the clothesline required parts: 608 bearing 3/8" (8mm) threaded rod to build print both parts…
replacement foot for clothesline
after third rope change in a single year, this model was born. adjust desired height in slicer, go with 100% infill. I prefer petg, but whatever floats your boat will probably do the job.
An upgrade to the original Happy Model Bassline battery tray.
"Remixed" from https://www.thingiverse.com/thing:4549912 To be used with a 35mm felt pad Print Settings Rafts: No Supports: No Resolution: .20 Infill: 60% Category: Automotive
ABT Sportsline is a digital STL model prepared for 3D printing. Preview renders show the supplied geometry from multiple angles. Choose scale, orientation, supports, layer height and material for your printer. Digital file only; no…
Hook for moving clothesline back and forward, if you have that kind of clothesline on your balcony ;)
Needed a way to hang smaller items for the mrs on the ikea clothesline / clothes hanger, made thing little part that clips on the top. Allows you to hang smaller items on either side without it sliding off.
The wife complained that the hangers would fall of the clothesline when it was windy, so I designed these clips to secure the hangers. The clip is designed for a 4 mm clothesline, I can create for other dimensions if necessary.
End caps for folding metal clothesline. Two different sizes. The SmallCap.stl is 10.5 mm (0.41 inch) deep. The BigCap.stl is 17 mm (0.67 inch) deep. The inside diameter of the caps are 26 mm (1 inch). Printed in ABS to ensure longer life…
My grandma had one at the farm in the 1940's. My mum had on at home. So, I might as well make one for myself today lol... It just keeps both sides of a clothesline on pulleys together. Otherwise, the weight of the clothing will make the…
This is a replacement clip for those that stay out in the sun for too long and eventually break off, complete with logo! Supports will be needed, best printed in an upright position (default in the supplied model)
Recommended material is the TPU flex Please check if the angle of the drying rack foot are compatible (normally they have the same angle)
1 Clothesline pivot needs 1 Thread lock. done in .2mm layer height. .4 nozzle
Damit mein Modell "Anreiselehre" auch den Weg ins Skadisregal findet, habe ich ihm heute eine eigene Halterung entworfen. So that my “arrival gauge” model also finds its way onto the Skadis shelf, I designed its own holder today.…
Na výběr je ze dvou druhů - děrovaný s hexagonálním vzorem nebo plný. Modely a tiskové soubory jsou přiloženy. --- There are two types to choose from - perforated with a hexagonal pattern or solid. Models and print files are included.
Wall-mounted plastic holder designed to secure up to 7 clothesline cords. Provides clean organization of drying lines and prevents tangling or sagging. The model is compact, easy to print, and suitable for indoor or outdoor use (depending…
EN) A clothesline tensioner is a quiet little helper we usually notice only when it’s missing. It’s a simple piece of plastic that keeps the line pulled tight so it doesn’t sag under the weight of wet laundry. When the wind blows, the…
This is sliding rack fixing + end pcs for other end and end plug. this model should be 17mm pipe and 5 mm wire suitable. made small change after printing, since was little loose.
A neat little addition to the home. No more tying knots — this clothesline clamp is a far more practical and elegant solution. Print instructions: Material: ASA Layer: 0,2 mm Perimeters: 2 Infill: 20% Infill Pattern: Gyroid Supports: No…
i wish to abuse 18650s from 2011 and thus i needed to create this, i haven't tested it yet so not a clue if it works but i mean it should. I'll test it once i get my printer back.
This is sliding rack fixing + end pcs for other end and end plug. this model should be 17mm pipe and 5 mm wire suitable. made small change after printing, since was little loose.
Wall-mounted plastic holder designed to secure up to 7 clothesline cords. Provides clean organization of drying lines and prevents tangling or sagging. The model is compact, easy to print, and suitable for indoor or outdoor use (depending…
Designed for 2s GNB 650mah LiHV batteries. The ones with an orange wrapper and flowers. Slightly bumper this away from the base plate as my flight controller has the motor connectors coming straight from the bottom, so I needed to give…
1 Clothesline pivot needs 1 Thread lock. done in .2mm layer height. .4 nozzle
Ganchitos para colgar las perchas en la soga y aprovechar al maximo la soga para colgar la ropa impreso en 0.2 y relleno del 20% sin sopertes
i wish to abuse 18650s from 2011 and thus i needed to create this, i haven't tested it yet so not a clue if it works but i mean it should. I'll test it once i get my printer back.
3D Printing Settings No supports Printed in PLA. (Insert in PETG) Infill: 5–15% Layer height: 0.2 mm Average print time: Vase: 10 hours Insert: 3 hours 15 minutes Dimensions: Vase: Height 18 cm, Outer diameter 13.5 cm Insert: Height 17…
Audi Sline key ring. I printed the inner part with 97% so that it fits better. Secured with some superglue. Printed on a carbon optic plate.
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![#0179 [UPDATED] Automatic Paracord Tensioner for Clotheslines [spring loaded, for 4mm cord]](https://media.printables.com/media/prints/962702/images/7581598_122262e0-2234-49ee-be2c-d0307a9276db_a2d9492a-091a-48f9-9736-3e0258748626/rl-20240819-011.jpg)
