Counting matching models…
***NEW NOTE: Hey everyone, please stop reporting to me that someone is selling prints of this design. See the licensing at the bottom – commercial use is freely allowed. The original was by Happy Moon, who licensed it like that (and I do…
The original version was too angular, so I made it smoother and removed a few flaws.
This is a remix of the wavy stand with smoother edges.
This new version has much smoother surfaces when 3D printing since it uses Quad Meshes. I've also tweaked each letter shape while converting them so that they don't have any strange divots or creases.
I used blender and Prusa's simplify algorithm to make Scott McDonalds's awesome Cursed Pirate Coin a bit smoother, see picture for comparison. For FDM printing I recommend orienting it vertically and enabling tree / organic supports (~20%…
This is an set of profiling tools for forming a smooth surface on silicone sealant. pls comment if you need other sizes.
This is a remix of the excellent cable chain for the Sovol SV06 made by rogerquin ( https://www.printables.com/model/447467-cable-chain-spine-for-sovol-sv06-3d-printer-extrud ). To make the chain flex smoothly, I used blender to scale…
3D Printed Silicone Caulking Nozzle with Integrated Smoother This nozzle streamlines silicone application, combining dispensing and smoothing into one efficient tool. Designed to fit standard caulking guns. Key Features: 2-in-1…
Joint smoother with 3 different roundings 10 mm , 2x5 mm 1 mm. Size 20x20.
Printed at 0.15mm with PLA+ no support
Printed on my Sovol SV06+ PrusaSlicer settings were: Print Settings: 0.10mm detail Filament: Generic PLA Printer: SV06 PLUS
Just because the original is beautiful but impossible to print… I try to make it smoother and delete some errors when slicing it. I know its not perfect but now it can be print with no problem Hope you like it
Foam Smoother Spinners for Shadowfoam to smooth out the cutout in your foam insert. With 1/4" tool shaft. Print in 0.10mm layer height to get a nice sharp edge and use 100% infill for more strength.
I noticed that when priming the Yeethammer it would get stuck towards the end if I didn't pull with enough force. This was a result of the geometry of the “track” in the “cam-track-fore-l/r” parts requiring more force towards the end of…
A wallpaper smoother at the hardware store costs around €5. Highway robbery! Print your own for a couple of cents. Has a smooth side for smoothing out wallpaper, and a sharp side for corners and tricky areas. The sides are even labeled so…
Molded from scratch inspired by Reloada 's design. I made the following changes added a hook to prevent the body from shooting off the press when the slot opened up modified to accept an M5 screw instead of a M6 smaller plunger with pilot…
Il Spiral Fidget è un gadget antistress dal design accattivante e funzionale. La sua forma conica, unita a scanalature a spirale precise, offre un'esperienza tattile estremamente fluida e soddisfacente. Ideale per alleviare lo stress o…
No print support needed Different chamfer size on each side
This is my take on how to make a NERF RAMPAGE PRO X (Half length) Pro LvL PRIMARY w/ an Average FPS of 125-130 with a 9kg Spring & Integrated Worker PCAR & requires NO SHELL CUTTING!!!!! Took the concept of Alternative_Cap_277…
Small roll holder upgrade that prints in 30 minutes. They are made to fit with tight tolerance so they spin nicer. They aren't bearings, but they are way cheaper than other options and do the job just as well really. - Print 2 - Gently…
I've recreated the role with a smoother surface compared to the orginal stl.
I simply edited the teeth to be longer and facing back and smoothed the model Updated 7/22/26 7:58pm Made a wider lower jaw as an option Updated 8/13/26 6:27pm Fixed up the teeth and made some parts of the skull top thicker so that it…
Added fillet so it is easier on the fingers. Made outside diameter 0.2mm smaller to reduce clicking resistance
Simple fondant smoother. Print it on glass bed for smooth surface.
Making the assumption that there will have some amount of weight on it, I've made a very short version of salzig's LACK table stacker model, thickened the walls a bit, resized the leg "receiver" hole a bit and beveled the edge to account…
My girlfriend asked me to create a smoothing tool for applying cream on cakes. So I sat down at the computer, designed one for her, modeled it, and 3D printed it :) The height of the tool is adjustable, and it features a screw for…
Recommend pouting wall order on outside to inside for better results.
Ultimately, it's a cleaner result and the center of the spool is the right color. While I lost the spiral winding, the filament is smoother.
Stop hitting your legs on that damn corner of the bed frame / table / etc – glue this on! Has a cutout inside for double sided tape. Print instructions Stop hitting your legs on that damn corner of the bed frame / table / etc – glue this…
Based on the image of Wolfcraft Joint Smoother.
The "Snap Ball" by DaveMakesStuff is a wonderful model. The Snap Ball at thangs.com: https://thangs.com/designer/models/3d-model/109485 The Snap Ball at thingiverse.com: https://www.thingiverse.com/thing:5408201 But the top surface of the…
Hello everyone! AnkleKris is back with my newest creation, and I’m proud to introduce you to the Disc Shooter V2.0! While doing extra testing on V1, I realized that, as fun as it was, it wasn’t fully complete — there were lots of places…
made for corners in 16 and 20mm in diameter
In Bambu Studio I used .4 nozzle, .12 High Quality settings with 4 walls and the Arachne wall generator. As in the rest of the original design, I used M3x5x4 Voron Heatset threaded inserts.
look on the down picture. its easy to see what to do. its might same as solving the dummy 13.
A simple case for TL-smoothers with a board size of 50x28x8. there is a single version and a double version with some mounting holes
When slicing the model, i kept having a weird hole in the tongue that i couldn't get to go away. I just made it so that the smoothed out as well as making the whole model have more polygons and softer edges.
A Smoother version of the Clicker Coin wheel but smoother, and looks somewhat like a quarter
A smoother and more “natural” shrimp hiding cave. Used for breeding or otherwise protecting shrimp and shrimplets. Also good if you have shrimp who hide a lot, but still want to be able to see them.
New Version Available Why should I print this ? This is a remixed version of "Smoother Makita LXT USB Charger". I closed one of the USB holes and made it taller to accomodate for my USB stepdown converter. I tweaked it in Freecad from the…
I was chasing that perfect surface finish with clean, shiny metallic reflections, and realized that the original STL had some low-poly faceting around the outer cylindrical surface. Since this was noticeable as vertical lines when printed…
This is a remix of https://www.printables.com/model/417067-game-board-spinner. Someone asked me about a game spinner and I liked this one. The creator mentioned adding a washer to make the play better. So I added a small (1 mm) raised…
A case for the TL-Smoother Plus v1.1 from Trianglelab. BIG WARNING: Several commenters on Thingiverse reported that this did not fit their TL-Smoothers. It appears that Trianglelab did not consistently size their PCBs, so this is unlikely…
just smooth version of original model, includes 3mf with sliced model for easier print. Reqires gluing
Smooth rolling spool holder modification for Core-One+ and Core One L printer spool holders. The yellow part shown is the existing bayonet base that mounts to the printer. The rest replaces the crooked post that leaves your spool hanging…
Alfawise U30 smoother mount holder.
Description This tool was born out of pure necessity! While renovating my bathroom, I needed a small tool that I can hold with two finger to smooth out the silicone caulk bead. I had the repair kit from Wolfcraft, but the handle was too…
The feeling of the original handle was not to my liking therefore I created this remix. This remix gives you a handle that slides in the slot with two small spring arm to give it better alignment. The handle has now a more linear movement…
individual box to place the tl smoother near the stepper motor The box is fixed on its support, from the inside or the outside (2x diam 5mm ) published on thingiverse : https://www.thingiverse.com/thing:3399073
Got a new Ender 3 and the benchy showed signs of "Salmon Skinning" saw a recommendation for TL smoothers for the X and Y axes and figured I'd give it a shot. I planned to use double sided tape to mount them in the main board case, but I…
This is a remix from SolidRye. I have included pictures of the TL smoothers I have. They did not fit in SolidRye's holder due to the pins protruding on the bottom side of the circuit board. I modified the holder to have openings so they…
BOM: Printed with ROSA3D Starter PLA Black The "Ninja" scraper is back, and it feels better than ever. This is the Version 2 (V2) update to my popular infinity-loop print removal tool. What's New in V2? Based on user feedback and testing,…
This is a pair of clips that fit a type of TL smoother and the clips will fit the Kywoo 2020 frame. It could also be used for other 2020 frames. The clips have an offset so that when installing inside the box it does not protube outside.…
only use 8 pcs M3x6 and 2 pcs M5 nuts mounts on the original frame If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Resolution: 0.2 Infill:…
Note: I use ball bearing 608ZZ for this project
A mount designed for the specific TL-smoother model I got. Since these boards aren't standardized, you may need to tweak the model to fit the board you got. (FreeCAD model included) The board should friction-fit in, but for good measure…
There is two version: - The normal one to glue directly to the back of the phone with glue - The multipart one, where there is a 0.2mm “channel” to place double sided tape Printing: I recommend printing in PETG if you want a polished…
UPDATE 04.03.2019 I've made different changes: aligned the position of some screwholes to fit better option to screw the box on the y-axis extrusion removed some mm onto the backside to fit better on printers with just a 220x220 print bed…
A case to mount a triangle labs 'tl smoother plus' style of TL smoother PC. It mounts on the back of the extruder to the rear cable cover. You may need some longer M3 screws (8-10mm) if the existing ones don't fit. Fitting a TL Smoother…
CRKT CEO FLIPPER Grip Fix! This is a replacement part I modeled myself for the CRKT CEO Flipper. Which fixes the main issue I had with it, that the bottom metal plate that holds the clip is extremely sharp and digs into your hand. I also…
I decided to install TLSmoothers on my Anycubic Predator and I really really liked SolidRye's Anycubic Predator TL Smoother Holder here-> https://www.thingiverse.com/thing:3794073 . I ordered my smoothers ( I like TriangleLabs products…
h I've designed casing for the new version of TL-Smoother boards which measured at width 22mm x length 36mm x height 7.7mm. It is designed to be highly configurable so that you can assemble it in many different ways. Video explanation…
A simply TL-Smoothers holder for smoothers 40 x 30 with vertical connectors. Un semplice porta Smoothers per filtri di dimenzioni 40 x 30 con connettori verticali. Possono essere fissati con un semplice pezzetto di biadesivo (come ho…
Ordered some tl smoothers to test from Aliexpress, but while waiting for them to arrive, I thought that why not build one as I have the proper diodes. As it seemed to work for what I wanted (fixing DRV8825 jerky slow movements), I decided…
Casing TL-Smoother 8 diodes TL-Smoother module In the slicer, you must enable the detection of thin walls.
I already had a mosfet mount under the bottom screw hole for the main board so I have removed the bottom mount point. These are the TL Steepers I used: https://www.amazon.co.uk/dp/B0719D5N2V (not an affiliate link) I have remixed the TL…
alors j'ai reçu mes smoothers pour ma tevo et il fallait bien les mettre quelques part. j'ai donc fait cette pièce pour les clipser a l’intérieur du boitier. ne voulant pas faire de trou dans le boitier je l'ai fixé au double face. de la…
TL Smoother mount for Zeelo TL-Smoother from Amazon Category: 3D Printer Parts
This is a Holder I designed for the FYSETC TL Smoother. The Boards just snap in. It is capable of holding 5. The board fit is slightly loose intentionally I just used little pieces of brim to tighten them up. additional file added for…
This is to replace the cover that goes on top of the Wanhao D9 MK10 extruder assembly. I based it off the original cover dimensions and made it taller to fit a TL-Smoother inside. The TL-Smoother must be the design that has the connector…
The coins are cool. Smooth. This is a case for 14 of them. The design is durable for heavy duty pirate play. No supports. I hope you enjoy the model! Comments📖, likes❤, ratings🤩 encouraged!
I bought the Nulaxy Laptop Stand laptop stand from Amazon , the https://www.amazon.com/gp/product/B07P54RSPY I really like the stand it's super solid. But I feel like the edges on the base are a bit sharp for sliding sensitive in the…
UPDATE A modular version is available which is updated to fit the new boards that are shorter. If you purchased the TL-Smoother after December 2016, please download the updated model for the casing at…
MMU3 electronics cover modification to accept button caps for the switches. Please measure your button distance and adjust holes accordingly! Not every cover is the same and switches are not always soldered in the right angle. This…
WARNING: Read before you print or even buy a TL Smoother: So far I've never seen someone saying how hot a tl smoother can get while you print something. I've printed my rack with PLA and after 30 min it's getting deformed due to the heat.…
It seems that the Plano Tactical Case (https://smile.amazon.com/gp/product/B0722CZMXZ) does a good job in keeping four 1kg spools of filament and two 500g spools dry and sorted. But, the latches pop off when I drop the lid. This prevents…
Hi everybody, After several months testing the MKS Robin Lite (32 bits board) on one of my printers, I ended with a solution than did not needed to be changed. So it was time to design a convenient case which holds all the boards system…
Use a 38 mm OD, 35 mm ID acrylic tube, 50 mm length.
Update 20200122: I've managed to make a design which can fit three (3) TL Smoothers into the factory Ender-2 electronic enclosure. It's an extremely tight fit, however, so make sure the wires are bent clear and be careful when…
Double Smoother mount for Anet A6 and A8. Mount Replaces two spacers of the mainboard. and take a look at my other Anet A6 parts: https://www.thingiverse.com/andreas-giesert/collections/my-anet-a6-parts Print Settings Infill: 100%…
This is a simple little tool to use with your Sunlu Filament Connector / Splicer (or other if applicable). After the heating cycle, simply close this tool over the spliced connection with the PTFE tubing and hold for about 30 seconds…
Fixed alignment issues for the Ender 3 Pro. The fan is offset on the bottom panel and there is a case screw in the way. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.4mm Infill: 25%…
http://www.thingiverse.com/thing:326641 modified to be 98mm long for spool holder extension. Category: 3D Printer Accessories
For completing devices you need: 12V 80 mm PC BRUSHLESS fan (80x80x25, or 80x80x10.8) glass container with outer diameter 148 mm and min. height 190 mm (I use glass vase from Pepco, SKU 35327801) 4x M3 screw (lenght 6-10 mm) + screw tap…
Modified the follower to be a little smoother and deepend the magwell catch thing.
Here a remix of the TL-smotther housing for Ender3 PRO to accomodate 4 modules. Unfortunately the orginal design was based on different tl-smoothers (different size). NOTE : you need to trim down the pins of the tl-smooter (flush with the…
Only bigger holes in toroid shape. 24.03.2019 Added second version. From https://www.thingiverse.com/thing:3495639 Category: 3D Printer Accessories
Fixed a few things in the original to make it easier and faster to print. The Fusion 360 original model contained a few things that made printing of them slower than necessary. The loft that created the shield contained some…
I just added 4040 rail mount from , 4040 V Slot Mount for other designs by FullApature Print Settings Printer: Mingda Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: Jessie PLA Category: 3D Printer Accessories
I Made a Case for my TL Smoothers for my Ultimaker 2+ Print in ABS maybe also PLA works. You have to modify your Mainboard Cover like in the Pictures. Tools recommended: Dremel or something else. Print Settings Printer Brand: Ultimaker…
I added 4040 Rail Mounts and a pair of tie loops. Print Settings Printer: Mingda Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: unknowen PLA Category: 3D Printer Accessories
A remix of RaffoSans drag chain and cooling fan base part with an intergrated TL Smoother Bracket from Asterchades. Use with this drag chain: https://www.thingiverse.com/thing:2526464 Print Settings Printer Brand: Creality Printer: Ender…
I needed a single holder for 8 dioids, TL-Smoother and couldn't find any. Two holes for M3 screw to secure it to 2020 extrusion. Category: 3D Printer Accessories
I wanted some venting on top so I added this . https://www.thingiverse.com/thing:2402881 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: unknowen PLA Category: 3D Printer…
Helps with friction created by sharp bends within PTFE / bowden tubing by running the tubing through this collar to force the angle. Used on both my Centauri Carbon and Kobra S1 which both had issues when I ran PTFE tube from the shelf…
![Velociraptor Skull (Smoother + slightly updated teeth + new jaw) [REMIX]](https://media.printables.com/media/prints/56f43609-7425-4d29-9528-c5d8a1715984/images/13569187_949ea601-ff4a-4e20-94c0-7c95246b92d6_043ddad3-94df-4c65-8fc9-a64e838bbff4/screenshot-2026-08-13-182037.png)
