18,045 models
Orginal link not opening due Thingiverse system issue Im re uploaded This snake can be printed at once, with no assembly needed after printed. No supports needed. Head is bigger now and some issues fixed on drawing. Prusasilcer head gone…
UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
I updated “the most articulated Snake ever!!!” that the segments can not be rotated complete 360 degree anymore and holding better together. I added a test file that you can check before, if your printer settings will work without…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Articulated Flexy Snake Hello, I’m excited to share this articulated snake model, the design is fully articulated, so it moves just like a real snake – perfect for desk toys,…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
This printable side-release snap buckle has been designed so that both sides print flat on the print bed, which allows the layer lines to be optimally oriented to create an impressively strong functional buckle. Carefully designed so that…
An easy to print human skull cut into pieces that require minimal supports. If you print with snug supports on the build plate only then only a little of the underside of the nasal structure gets 'stringy' (above the roof of the mouth). I…
Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…
This posable articulated snowman makes for a festive fidget toy. https://youtu.be/h_6IVLau064 https://youtu.be/S00Uxp5Etow Printing All parts can be printed without supports. Several parts (particularly Chest.stl) have very minimal…
The head and body are two separate parts. Simply click the head onto the body. Please be careful when doing this! Tips for printing: Filament: PLA Supports: No! Layer height: 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall…
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
This is a shorter snake that of course prints quicker, but is also stronger since there is less smaller links. If you are looking for the shortest snake, it can be found here: https://www.printables.com/model/856137-shortest-snake-v12
Now you can get the most articulated Snake ever!!! The segments can be rotated complete 360°. I added a test file that you can check before, if your printer settings will work without printing the single parts together. The design is made…
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
This fidget toy is something I originally created for myself to get through the never-ending zoom calls, I'm sure most of you have experienced. Once I had designed the thing, I printed a few out and many of my friends wanted them, so I…
Print twice and slide together.
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
Simply hold the Snap-Fly between your fingers like you're about to snap then… snap and fly! ✈ If you're left handed, hold the Snap-Fly upside-down and watch it defy gravity! The small “mouse-ears” are just for better bed adhesion and can…
This is a pretty tight fit and snaps in place nicely. The case was designed with the official active cooler in mind; there is an intake vent for the fan, exhaust vents at the back and some more vents above the radiator to help with heat…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad Don't you hate misplacing your individual SD cards? Now…
These flexible little snails are almost as fun to hold in your hand as their real-life counterparts. Print them and you too can experience the joy of handling snails as often as you want! Update! - I've fixed the baby snail so the…
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
This is a 'simple', articulated snake with a smooth body (no scales) in 2 lenghts Version 1.1 - 03 V 2025 Original is with a head and 43 body segments - 239mm long Short and keyring versions are with 14 segments - 92mm long It's based on…
This is a fully parametric storage box with a hinged, snap-fit lid , designed in OpenSCAD (you need to install BOSL2) . All key dimensions can be adjusted, making it easy to adapt the box to your specific needs. The design is optimized…
If you want to support me :D or use my model for Commercial use : https://www.printables.com/model/1199152-articulated-snake-v2 3D printing service AVAILABLE here: https://www.fiverr.com/yassir_ela/offer-3d-printing-service -Support: No…
This is a grid for Gridfinity where you can easily attach multiple grids together for those of us that have smaller print beds. The grid can be printed in PLA or PETG. I recommend .4mm nozzle and .2mm layer height. I put the perimeters up…
https://www.thingiverse.com/thing:5380535 Check out the videos: textured variant: topology variant:
Snap-fit ball joint with locking nut - Giunto Sferico ad incastro con ghiera di blocco Compact, reliable, and easy to assemble. The T-SSIC features a snap-fit spherical joint secured by a threaded locking collar (clamping ring). Ideal for…
simple articulated snake, can be resized
A fun little marble maze. No supports required, and assembly is 100% snap-together using ball and socket joints. No hardware or glue required. Requires one marble (not included). Parts base.stl - 1 maze.stl - 1 axle-cam.stl - 2…
Snap-in corner covers for Prusa CORE One printer. Depending on your door orientation, print one of either the “standard” or “swapped” covers. Use this for the corner with the door handle. Print three of the “original” covers and use these…
This highly detailed 3D printed cobra captivates with its segmented body that can twist, coil, and strike hypnotic poses. Each articulated section mirrors the scaly texture of the real venomous snake, bringing lifelike movement to this…
Versatile drain cleaning tool available in three lengths—15cm, 20cm, and 25cm—designed to effectively unclog and remove hair and stubborn debris from (drain) pipes. Works with most filament types, provided they aren’t overly flexible or…
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
Launch into Fun with the Uhltimate 3D-Printed Catapult! Unleash the power of precision and engineering with my state-of-the-art 3D-printed catapult! Perfect for hobbyists, science enthusiasts, and anyone who loves a good challenge, this…
By popular demand, here's a really long version of the Articulated Snake with Scales. How long is it?!???? I don't know, I haven't printed it yet. :) Someone print this and let us know how long it is. I'm guessing it'll be close to 6'…
I have created simple snowflakes for Christmas Tree decoration. Each snowflake is around 5 cm diameter. Easy print. Check out my entire Christmas decorations collection: https://www.printables.com/@miglo/collections/1855906 If you dowload…
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
Now - here the brand new design of my articulated snake, which is not that spiky anymore. The joints are again improved. I added a the mini snake (also as keychain with 3mm hole) which you can use as a test file before a big print, if…
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer…
Object Description: This is the reinforced Version 2.X of my bag clip with automatic snap-in mechanism. Basically it was already a solid design, but even the strongest part can be improved. Recently my wife showed me our first broken bag…
Create your own dragons – directly in Blender! Stop downloading pre-made models. Become a designer yourself! With my modular dragon kit for Blender, you can transform your visions into 3D models. I've done the hard work, precisely…
Pause mid-print for color change and magnet insertion. 4mm diameter, 2mm height magnets. Magnets and colors are optional - tool works just by printing as is. Recommended settings: 0.2mm nozzle 4-5 walls high infill Use the smallest layer…
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Remix of the snowy owl Hedwig by Peter Farell with a flat bottom (for an easier print)
This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…
Here is my take on a catch all / centerpiece / snack bowl! Use it for keys, snacks, TV remotes…morning cereal? I don't judge. Three versions available: 1 Compartment, 2 compartments, and 3 comparments. Check out my other designs too! Coda…
Update 01.06.2024: The wall generation in the current slicer version makes the eyebrows rough. I have adjusted the color so that it is not noticeable (new version V3). Summary This is a model of Lightning McQueen in a kit card style. Some…
There are plenty of drain snake STLs out there, but this one has bite. The design allows larger teeth while keeping the snake small enough to slip into drains. Prints in less than 30 minutes and works well at 0.20mm layer height. Fun…
Articulated Snake v1 by Onasiis This is not my design, designer is Salvador Manceraonasiis • Spain I just wanted to share it with you.
Introducing the Dummy 13 Heavy Sniper Rifle — our most powerful and commanding weapon yet. Inspired by the legendary Barrett .50 Cal, this beast brings serious firepower and an unmistakable presence to your loadout. From its long barrel…
🎨Try KOGI LAB for free at kogilab.com ! Meet the Chillest Snake! 😎🐍 This little guy has a cute stylized look, big expressive eyes, chunky scales, and a fully articulated body with plenty of movement. Curl him up, wrap him around your…
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Overview This is a modular snap-fit hinge designed specifically for 3D printed parts and CAD workflows . The main goal of this model is to provide a ready-to-use hinge that you can directly import into your own designs, without having to…
Compact snowball maker with a hinge. Easy to print and easy to assemble. It has convenient grips to open the mold. Printing: I printed this with PLA, 0,2mm layerheight, 3 perimeters, 15% infil. For printing orientation please refer to 3mf…
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
This snacking tongs will keep your hands and fingers clean while enjoying a bag of cheese puffs, chips or any other bite sized snacks. Requires no effort to keep it in between your fingers. UPDATE - added flat profile version per…
2020-Dec-29: Deleted rubbish. Update the version with bigger mash and smaller front to prevent hittig the leadscrew 2020-April-06: Added new version with much smaller mash - only 0.4mm thick - to pretend hitting the leadscrew at homing…
This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an…
Looking for the ornament version? Check that out here! Create your own snow globe by picking which panes to print and slotting them into the base! The base can support up to 3 panes, and there are 9 options (+1 blank pane) to choose from.…
I remixed the box to have a snap-fit lid and vertical holes for less bridging. I added a new version that takes inspiration from the Galactic Empire. (I was bored and have not had a chance to test print)
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
This my attempt at modeling a fully print in place cobra with a rearing head, it can all be printed in one part without any support and can be scaled up as much as your printer allows. Print settings: No support No raft 0.2 layer height…
This little cobra has got his eyes on you! Glass eyes! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim for this one. That would have been a mess to clean up afterwards! I did use…
Adorable 3D printed snail table lamp — a cute animal night light for kids room, bedside or cozy home decor. Fits the tBulb B dimmable USB LED module. id : se1008797 size : 115X198X150mm files : 3 pieces : 4 maximum size of the component :…
crystal snake, dont use brim dont print small
Just in time for the Christmas season, version 3 of the popular Christmas tree is now available. The "branches" of this Christmas tree are made of snowflakes. There are 15 layers of snowflakes of different sizes that are joined together.…
Watch here for more information! It's time for the classic Ace Pilot Snoopy! This is a 3D modeled and 3D printed version of Snoopy's Pilot form with his house. Hope you like it! Let me know what you think. :) Modeling Software: ZBrush…
This is a remix from Taylor Herrin . For more info how it is created see at the original model. The sculpture were so nice but I wasn't able to print it due to net errors. So I repaired it with Blender. In addition for faster processing…
🪖 Sniper Garden Gnome – The Silent Guardian of Your Backyard Forget flamingos and boring old gnome statues— this tactical legend is locked, loaded, and watching your six . Meet the Sniper Garden Gnome , a low-profile, high-impact guardian…
Simple snowflake Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page…
Unique coiled snake planter pot designed as a bold decorative piece for home or office. The coiled body forms the planting area, making it perfect for succulents, small plants, moss arrangements, or decorative displays. This model…
Golden Snitch Harry Potter
Snappy is a chubby little gator with a big smile and even bigger charm! Whether you keep him on your desk, gift him to a friend, or turn him into a keychain buddy, he’s ready to snap into action. This one-piece monocolor 3MF prints smooth…
Der Ultimative Filament Clip: Snap & Secure Dein Filament! Bist du es leid, dass sich dein Filament auf der Spule löst, verheddert oder unordentlich wird? Unser Snap & Secure Filament Clip ist die perfekte Lösung für jeden…
18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…
I made remix from print by porda ( https://www.thingiverse.com/thing:424612 ). Adjustment compare to porda in this remix: 1) Porda design hasn't infill and Golden Snitch was lightweight. 2) For better print and better result I cut Golden…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Sources: The Snail from: https://www.printables.com/model/262274-filament-schnecke-filament-freunde-filament-snail thx __ The Idea from: https://www.printables.com/model/1257063-toilet-paper-roll-holder Also the solution with black pupils…
Just a rudimentary, stylized snowflake made to resemble a circuit board for the technology-minded among us to integrate into our winter holiday. Designed to be hung from a tree, with the option to hang it from any of the six points to…
A giant version of the articulated fidget snowman! Optimized for larger prints. https://youtu.be/S00Uxp5Etow https://youtu.be/h_6IVLau064 Printing All parts can be printed without supports. Several parts have very minimal contact with the…
Tired of broken wall mounts? Meet the wall mount your PolyDryer actually deserves! If you're like me and love your PolyDryers but found yourself frustrated with the original wall mount being difficult to use (and worse, breaking over…
Designed for peak performance and maximum style, these V-shaped snow plows will clear the toughest of walkways. Each plow (R & L) features a directional tab that'll snap into the front ventilation holes of your Crocs. We recommend…
Printed on an Ender 3 v2 Neo in 17.5 hours. I found an amazing model of a Disney castle, but it would not slice properly for me. I spent a ton of time mesh editing the model to make it super easy to print. The model shows errors, but…
Simple holder for snips/pliers. Attaches to the wall with the M4 insert from the Honeycomb wall.
Snowflake Candle Holder CANDLE HOLDER: 87,39x6,91x100,87mm CANDLE COVER1: 68,53x40,1x68,57mm CANDLE COVER2: 67,13x56,95x67,16mm CANDLE COVER3: 69,13x58,65x69,16mm CANDLE RADIUS: 20mm
"Snow" Globe Christmas Lithophane - A Christmas themed lithophane globe of a winter landscape. The STL file was created using Lithophane Maker Desktop , and the part was printed with American Filament Classic Lithophane White PLA . When…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
This is a series of test prints which were inspired by the following MIT publication : Snap-Fit Joints for Plastics - A Design Guide https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf While the above…
Snoopy, from the comic strip Peanuts by Charles Schulz. Snoopy is Charlie Brown's pet beagle. He is is a loyal, innocent, imaginative and good-natured beagle who is prone to imagining fantasy lives, including being an author, a college…
UPDATE: Due to popular request, the Kit Card was updated in regards of tolerance (fit) and stability. For optimal fit I would recommend using a layer height of 0.2 mm. Christmas ornament version of the loved snitch card. Merry christmas!…
This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…
Print in place: no supports, no assembly. - Looks great, prints great! I designed this to have more detail and more articulation than other snakes I have seen and printed. So much articulation! Really fun model. Print size at 100% is…
Introducing the ultimate solution for guitar players who struggle to keep track of their guitar picks! 🎸 We've all experienced the frustration of dropping a guitar pick, only for it to seemingly vanish into another dimension, never to be…
Model of the golden snitch from Harry Potter. Sized to 1.5" to match sizing seen in movies.
