496 models
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
***Update*** I have uploaded versions with a smaller overall diameter. I have a SodaStream Duo and it came with one plastic bottle and one glass bottle. I wanted to have a stand for them to let them dry upside down. So I did some changes…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for PETGSource material: PET
A model of a standard, easy-to-print SodaStream cap. I didn't use supports, but if you don't mind taking them off, print quality could be better with them. There are two ways to print this model. One is to print out the complete cap in…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
SodaStream Glasflaschenständer zum trocknen
Print approx. €14.04–€17.16 excl. taxPreliminary estimate for one variant
This is a bottle holder for our Sodastream. For licensing reasons, I published this model without the Sodastream logo. There are two different versions of the lid. Once for the 1 liter glass bottles and once for the 0.75 liter glass…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for one variant
...not really a "source file" remix but a reinterpretation of the basic design done from scratch in FreeCAD with some refined edge chamfers - parametric *.FCStd file is included Dimensions are fitted to the much more chunky SodaStream…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
When washing your sodastream glass bottles, leave them to dry in this holder, which fits both the bottle and the lid. Furthermore it features a removeable dripping tray. Print instructions Models These models can all be printed in any…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Sodastream Halter für Glasflaschen zum austrocknen. stabil / Standfestigkeit hoch / schlichtes Design Sodastream holder for glass bottles to dry out. stable / Stability high / simple design Print instructions Printer brand: Prusa Printer:…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
A twisted stand for drying the Sodastream glass bottle. Designed in Fusion360 and printed with PLA Black without any supports.
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
I dropped my 1L Soda Steam Slim Bottle a couple times the and the bottom plastic base broke so I modeled a replacement. Just put a little hot glue in the bottom and boom…back in business. This model is designed to print with no supports.…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Make your sodawater with a 0,5 liter pet bottle, like coke, fanta,… Works on Sodastream DUO, EASY, TERRA, ART, POWER and JET which uses normally 1 Liter Sodastream PET-Bottles Older Systems like COOL,.. have shorter bottles, for that you…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for PETGSource material: PET
A double bottle stand for the sodastream DUO bottles. Glass bottles and plastic bottles fit into the rack and the caps can be inserted. There is also a drip tray if the stand cannot be placed at the sink. Printed on a MK3s with PLA in…
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for one variant
This stand is a convenient way to dry your SodaStream bottles after washing them. It hugs the exterior threads, allowing maximum airflow to reach the inside. You can prop the cap up against one of the legs. I've included versions with 3,…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
Simple stand that allows the waterbottles to dry out. Fits bot sodasteam and wassermax bottles. Print with standard settings in PLA or PETG
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
Der Abtropfen hilft, dass sich in der Flasche kein Kondenswasser sammelt und richtig trocknen kann. Die Flasche steht dadurch fest und fällt nicht um. Habe für meine Freundin 3 Stück gedruckt und sie ist begeistert. Habe es nur für die…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
Was looking for a good bottle holder that would drain towards the sink. Most were either too elaborate or didn't drain away. This one is to the point and works great. v2 - Wider, longer, taller, edges lifted to keep it from draining in…
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for PETGSource material: PET
Simple 2-part sodastream bottle stand that assembles for use, and disassembles afterwards in seconds for space-saving flat storage in a drawer (or similar). Printing: Material - anything you like really - not important. Silk PLA pictured…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
I was annoyed that our empty plastic water bottles always topple over when we open the kitchen drawer. So I made this holder which keeps up to three bottles in its place. Although this minimalistic design looks quite fragile, it is…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Die Version 2 unseres bewährten Sodastream Flaschenhalters bringt zusätzliche Funktionen und zahlreiche Verbesserungen mit sich, die Ihren Alltag noch praktischer gestalten. Neben der sicheren Aufbewahrung von Sodastream-Flaschen verfügt…
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for PETGSource material: PET
Simple and easy to print replacement-nut for the pressure hose of the SodaStream Crystal 1.0 and 2.0 and SodaStream Jet. If you have the option, select the "Nut.stl" file. The other file, "Nut_Co2_side_slim.stl", is designed for the side…
This stand is made for the drying of SodaStream bottles. Multiple stands can be stacked , regardless for which bottle. Currently there are models for the following bottles: SodaStream DUO plastic bottle (30 mm inner diameter) SodaStream…
Features: Prints in one part Fits on glass bottles (Sodastream crystal) Fits on plastic bottles Easy on your printer Many different designs to choose from Printing: Choose the design you desire for your bottle type and print it with at…
I designed this to keep the CO2 bottle for my budget aquarium C02 fertilizing from tipping over. Fits an 425g C02/60 Liter/ 60mm diameter CO2 bottle Print instructions Used PLA, 0.3mm Layers
This is the nut that connects the little black CO2 hose, the hose has to be pushed through the slot in the nut. Printed with PLATech for strength. No supports needed Print instructions Category: Replacement Parts
An adapter to use soda bottles (European?) with your SodaStream machine. This adapter fits the older style of SodaStream threads (pre 2018?). What differs this from the others here on Thingiverse is the grip on this adapter to remove it…
Un adaptateur pour les bouteilles sodastream en verre (Crystal) Bitcoin : 1DdrhYUJKzw3iEnvEhfff3Fox8DJin94F3
Hello together, Who doesn't know the struggle with CO2 cylinders lying somewhere around in a cabinet taking up a lot of space? Therefore i designed a small bracket to screw into the cabinet. Depends on the bracket you need, it can hold…
I made some modification of model by dede67, his model has the same thin walls like original (which is originaly made from ABS), such thin walls is is easy to crack (around the holes). My remix add some material around the holes and the…
Buy me a coffee, if you want :) Introducing the Sodastream Drip Cradle – the ultimate accessory for your Sodastream experience. Crafted with precision and care, the Drip Cradle is not just a holder, it’s a statement of efficiency and…
The CO2 bottle fixing block in my Sodastream carbonator broke, so I decided to make one myself. Updates: 15.4.2024 - Second one lasted again roughly a year. PLA might not be the best material. Try to use PETG or even better PC or Nylon…
This is a 3D printed adapter designed by my friend Alex Courville to connect old Sodastream CO2 tanks or the Sodastream bulk CO2 fitting to the latest style Sodastream machines. O-rings are available in my Tindie store . You can see see…
PLA, 0.2mm resolution, 20% Infill. With Support. Interface pattern spacing 1mm, xy-separation 100%
A Nut to replace the original SodaStream Nut wich is pressing the Tube in the bottle head. The broken “old” nut can stay on the black tube. printed in PLA with a layer hight of 0,2mm
A simple stand for two SodaStream bottles and caps. It can be placed next to the soda stream to dry washed bottles. The bottom tray is rimmed to keep water from running off the table. I made this with PETG filament, but PLA would also work.
Do you use a Sodastream tube to carbonize/pressurize your precious brews in Cornelius kegs? Have you (like me) found it a bit cumbersome moving a keg around with its Sodastream tube attached? Or just finding somewhere to put the…
Print sideways as shown for tensile strength. Add a 30mm M3 bolt and a square (hex works) nut. Some support needed between the holes but not much for easy removal.
I designed this holder for a aquarium co2 dispenser.
With this printed I can safely and securely attach my Sodastream CO2-bottle and the regulator to my Cornelius keg in my kegerator, making sure the bottle doesn't fall over and my beer isn't flat when I want to pour a pint. A remix of the…
Based on a bottle cap and inspired by a bottle stand, i needed more than an only one bottle stand, so i designed this and remodel all the thing with more bottle space and my own design. CAUTION: The 3 and 6 bottles models need a print bed…
Halterung von Sodastream Crystal Glasflaschen. Zum trocknen nach dem Spühlvorgang und zum aufbewahren der Flaschen. Der Halter wurde mit einer 0,2 Nozzel und mit einer Schichthöhe von 0,2 mm gedruckt. Das Infill beträgt nur 5%, dadurch…
A SodaStream Bottle Cap with a nice design and handle. 0,20mm Resolution, Support on the built plate only, infill 20%. PLA. Used Creality Ender 3 Pro.
Modified for Sodastream JET (https://www.amazon.com/dp/B07Q3966XW/ref=dp_cerb_1) Made the lever longer. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 10% Gyroid Filament:…
This is a simple bottle holder for sodastream glass bottles and the lid. There is a small gap underneath the opening to let the bottle drain water from washing and let it dry. Prints sideways in one piece with minimal supports.
Unfortunately, the Sodastream Cristal bottles are not compatible with the Duo. With this adapter, the Cristal bottles can also be used with the Duo. The short adapter can remain in the soda stream if only Cristal bottles are used. The…
This is a storage and dispenser for SodaStream PET caps. it holds up to 7 caps at once and prints without supports. The caps can singly removed on the bottom. UPDATES: 2021-02-14 Added version for Crome Bottle caps as requested by…
Hey Printers, this is an adapter that connects a standard PET bottle to SodaStream Terra, working with the SodaStream Duo maybe - please give me feedback in the comments. If you would like to support my designs to give me a small tip,…
The design of this bird feeder is based of the design from Gavin Kennedy. It uses an old SodaStream PET bottle instead of the soda bottle. In addition I have designed a roof to fit the outer diameter of the bottle. The segments of the…
Origin My household uses a lot of Sodastream water and we have a fairly large collection of these clear polycarbonate bottles acquired over time, but as they age the “expire” and can be unsafe for pressurized use. Design Parts: Solid cap…
WARNING CO₂ is under pressure! THIS MUST BE USED ONLY WITH SAFTEY VALVES IN PLACE This still may explode or break - be prepared Be careful Cover with towel when testing Wear eye protection Print slow with 10 perimeter/walls Use PCT, PC or…
Der Verschluss kann als Ersatz für den Original Verschluss eingesetzt werden. Er ist dabei recht griffig und gut zu drehen. Es wird empfohlen, ihn in PETG, ABS oder ASA zu drucken, da PLA die Spülmaschine nicht übersteht. Zusätzlich wird…
This adapter makes it possible to connect standard soda bottles directly to Sodastream carbonator. Use a seal from a normal bottle cap, an o-ring or something else to properly seal the soda bottle properly to the adapter. Model is made…
Safety advise: use at your own risk! Don't use without a gasket! Remix from https://www.thingiverse.com/thing:3404200 This adapter let's you use crystal glass bottles in the sodastream easy. You need an O-ring - or even better an original…
A insert to use crystal bottles with the sodastream duo. I added a hole to easily remove the adapter when you want to use other bottles. + I removed the sharp edge.
The sturdy, stylish drip holder for glass carafes (Sodasystream Crystal) and plastic bottles brings order to your kitchen! The design makes it easy to put the glass carafes and lids in the holder. Der robuste stylische Abtropfhalter für…
I want to make some projects in the future with old Sodastream bottles so I derived part of found model to be my universal start point and I think it could help others, too!
Note: the holder works fine but after a few runs the used PETG has deformed. I used the Auto program on the dishwasher which should not exceed 60 degrees Celsius but together with the mechanic force it will not persist. I am looking out…
Egoutoire pour bouteille sodastream x4 Bitcoin : 1DdrhYUJKzw3iEnvEhfff3Fox8DJin94F3
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
I tried to make an exact copy of the release lever for the sodastream pump. Minor simplifications were made for the cost of using more material. The model seems to fit very well and works properly. However, strengthening of the sides…
Support for CO2 Cylinder for Sodastream or similar. The "Bottom" part is minimal conic, so the Cylinder is stored safely
Remix for no supports print. Replacement part for broken push button on the SodaStream JET.
Inspired by https://www.thingiverse.com/thing:4602157 I created my own bottle stand for drying (and storing) SodaStream Crystal glas bottles. Important for me was a secure stand (the bottle does not tilt or touch other bottles with two…
This is a screw on funnel for PET soda stream bottles. Presses snugly against the top of the opening with no gap. Designed to print without supports. 2020-10-13 Update: Added Step Files for the Funnel and only the thread.
This is a screwable cap for the SodaStream C02 Cylinder
We drink a ton of sparkling water so make up a bunch of SodaStream bottles then leave them in the fridge to chill. We used a clumsy bottle rack to stack them horizontally on a shelf but they'd frequently fall off and it was quite…
This is inspired by Steffan Krautzs SodaStream Rocket Dryer. https://www.thingiverse.com/thing:809870 Its a really useful kitchen tool to dry out the SodaStream PET bottles after washing. To make the stand more compact for store, I have…
There are some cases when it's hard to pour a liquid into a standard plastic SodaStream bottle without spilling. For example, if you are pouring water from a Brita filter, or juice from a screw-top carton box. This funnel is designed to…
drip holder for the soda stream crsytal bottles. it can hold the bottle an the cap. It should work für other bottles. The tray can be easyly replaced, so you can clean it.
You only will need some M3x40 screws.
Store 8 SodaStream 60L carbonators. Works great to transport them to your store for exchange. Designed to fit the print bed of a Prusa i3. I used PETG but it should be fine to use PLA. For faster printing, use a 0.6mm nozzle and 0.3mm…
Most of the exisiting dripoffs for 3D printing did not fit for SodaStream Duo glass bottles, so I designed this one. @OliWee_1551265 made a wallmount for this dripoff, take a look at Sodastream Duo Drip Off Glass Bottle Wallmount .
Here is a fixing solution to the press button of a Sodastream Spirit machine that broke. This part is quick to print (less than 30 min) with a minimum support. It helps to maintain in place the broken original piece. You can glue it also,…
Sodastream bottle cap. Use the gasket
Changed design for the shown bottles.
This is a stand for a Kegland Oxebar keg (4l and 8l version) with a SodaStream mount. Puts together a Oxebar keg and a SodaStream cylinder into a nice package so it can't fall over (especially for the 8l version). If you use a mini…
This is a remix of https://www.printables.com/model/300630-sodastream-jet-button/ where I removed the fin on the button
Dieser Trichter mit Gewinde passt auf Sodastream-Flaschen. Wir nutzen eine alte Flasche als Behälter für das Geschirrspülmittel und verwenden den Trichter zum Nachfüllen der Flasche. This funnel with thread fits sodastream bottles. We use…
PLA or PETG can be used 0.2 mm layer height 0.4 mm nozzle
Do you live in absolute filth? Does the state of your pantry walk a fine line between something you're just quietly ashamed of, and a genuine hazard to your families health? Mine too! This model takes you just one tiny step further away…
My sodastream got broke... i think this might be the most frequent reason. You can find this problem with the broken plate for the locking pin, everywhere in the internet. Ok... got a printer, so i can print a new lever... but why…
The injection molded plastic push button on the top of my SodaStream broke in half. I made this simple replacement (V2) as a temporary fix until I could buy a replacement button. I printed it with Translucent Blue PETG so it would be…
Mir ist bei der Reinigung des SodaStream leider die Hülse kaputt gebrochen. Auf Nachfrage beim Hersteller, teilte man mir mit, dass es das Teil nicht einzeln zu erwerben gibt. Unfortunately, the sleeve broke while cleaning my SodaStream.…
I printed mine using a 0.8mm nozzle and 0.4mm layer height and no supports at all, which seems to come out just fine. As you can see, there are some bridges that would probably be of better quality when using supports. I don't care about…
Its a little Rack for 3 co2 Bottles Sodastream
This is a slight remix of ShaneF12's file to specificly fit Sodastream Glass Bottles, who have a smaller hole but still require a strong base since they are heavier and have a bigger bottom. The new tip is 2,4 mm wide. I recommend…
This is a stand for the Glass Bottles from the Sodastream. Water can escape easily, nothing goes inside the bottle, ensuring maximal airflow. Water droplets will vaporize on the bottom and not go over the small border. Please leave a Make…
Just a simple Sodastream Bottle Stand with a width of 10 cm. Works with the plastic bottles. Didn't tested it with the glass bottles. Printed with 20% infill at my Ender 3. Uploaded the same at Thingiverse:…
Potential Danger! CO₂ is under 57bar pressure ( 5.7 MPa). So be aware this is not a toy - wear protection glasses and gloves. Dry Ice is very cold -78°C ( - 108° F ) direct contact can lead to severe burns. Print with lot infill and…
Why My colleague lost the drip tray to his Sodastream Jet machine, which was rather inconvenient. I was able to get a hold of a spare one and modeled a replacement that's tested and fits. Features Tested to fit Sodastream Jet machine…
Da wir mit einigen Sirups gleichzeitig arbeiten und hier manchmal Verwirrung über den Inhalt der Flasche entsteht, habe ich die Vorlage von Kryštof um die bei uns am häufigsten verwendete Symbole erweitert. Der Dichtungsring ist direkt…
just a small step for a designer - one giant change for mankind :) But the real oscar goes to: https://www.thingiverse.com/devstroyer/designs for the basic design ( https://www.thingiverse.com/thing:3657011 ) I love it - thank you ! I…
small secure screw on ring to dry Sodastream glas bottles (crystal / Glaskaraffe ) upside down - single dry rack
A modular rack for the CO2 cylinder, to store them more efficient in the shelf. The rack fits perfectly on the IKEA Hejne shelf. The parts are screwed together with M3x16 Screws. The connectors are unthreaded and the Screws are screwed…
chamfer on bottom to compensate elephant foot 3 perimeters line width 0.45 0.2mm layer height TPU flex material 0.8mm top/bottom tickness hide seam no retraction top pattern: concentric
This is inspired by Steffan Krautzs SodaStream Rocket Dryer. Its a really useful kitchen tool to dry out the SodaStream PET bottles after washing. To make the stand more compact for store, i have made two of the legs foldable The design…
The first gasbottleholder needs screws. This version is slightly different and do not need screws. Some bolts holds everything in place. If you feel better, you can glue them together.
Neat little Sodastream syrup bottle tray Also compatible with YO syrup bottles
We like to fill up our sodastream bottles with still water and keep them in the fridge until we're ready to use them. The only problem is, it can get confusing trying to keep track of what's carbonated and what isn't! I made these cap…
