P
PrintablesIc3Gr33dy
PIR HC-SR501 Case
This is a case for your PIR sensor. It fits perfectly into the case. Have fun :)
- Downloads
- 632
- Likes
- 47
- Rating
- 4.88
Search results: sr501
Counting matching models…
P
PrintablesCorn Leaf
HC-SR501 (SR501 / SR-501) PIR Sensor Tiny Case w/ Snaps
Smallest possible case for the HC-SR501 PIR with snaps, mounting posts and indexing notch. Screws or tape mount to wall.
- Downloads
- 485
- Likes
- 33
- Rating
- 5
P
PrintablesHouse3D
PIR HC-SR501 Housing Without Extension
Remix of the HC-SR501 with extension. I removed the back but included a slight gap in the back for cable to run through. Print Settings Printer: REPRAP Samuel Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category:…
- Downloads
- 423
- Likes
- 17
- Rating
- 5
P
Printablesopentux
HC-SR501 PIR ceiling case
Dear makers, we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from…
- Downloads
- 340
- Likes
- 23
- Rating
- 5
P
PrintablesManelTo
PIR HC-SR501 (step format)
An HC-SR501 PIR component in step format for use in your own designs.
- Downloads
- 307
- Likes
- 13
- Rating
- 0
P
Printablesclement0635
Support and enclosure for HC-SR501 motion sensor module
This enclosure is designed to fit perfectly an HC-SR501 motion sensor module such as this one .
- Downloads
- 261
- Likes
- 26
- Rating
- 5
P
PrintablesA-maze-1ng
PIR sensor housing with movable mount (HC-SR501)
For my project I needed a articulated mount for the HC-SR501 PIR senor. The base plate can be attached with M3 wood screws. The coupler needs to print with support. What you need: 4x M3 heat insert (I used M3x5.7mm) 4x M3x8 screw 3x M3x12…
- Downloads
- 187
- Likes
- 18
- Rating
- 5
P
Printablesbeerman
PIR Motion Sensor - WEMOS D1 Mini + HC-SR501 - Philips Hue
After making one of Qrome's awesome print monitors I noticed how similar in size the OLED module and a PIR sensor I had to hand were. So instead of reinventing the wheel and creating a new body for the motion sensor I remixed Qrome's…
- Downloads
- 164
- Likes
- 17
- Rating
- 5
P
PrintablesScott Gibb
HC-SR501 PIR Sensor Case
HC-SR501 PIR Sensor Case This thing is a simple bolt-on case for the HC-SR501 PIR Sensor, the case is designed so that it can slide onto my Panasonic TV and face the rest of my room. The case was designed using an open source step file…
- Downloads
- 149
- Likes
- 10
- Rating
- 0
P
Printablesopentux
DHT22 + HC-SR501 PIR ceiling case
Dear makers, we would like to share our ceiling case for DHT22 sensor, together with PIR Arduino compatible sensor HC-SR501. Use two 2x4mm screws for fixing PIR. Drill hole 67 mm. We tested with PETG due to higher temperature resistance…
- Downloads
- 121
- Likes
- 17
- Rating
- 0
P
PrintablesChris Twomey
HC-SR04 + HC-SR501 Casing + Angle Adjustable Cradle
Remix from https://www.thingiverse.com/thing:1799012 Allows housing for both HC-SR04 and HC-SR501 for when you need both motion and distance detection. It also fits a small microcontroller in the rear, though you will need to use glue or…
- Downloads
- 107
- Likes
- 14
- Rating
- 0
P
Printablesplanetar
Case for ESP32, PIR HC-SR501, 0,96 I2C Display and 2 more sensors
This is an enclosure for 3 sensors, a display and a ESP32 to run them all. It has quite some volume and a lot of air vents and it keeps the sensors in pockets that can be sealed with a bit of gum to keep the influence of waste heat within…
- Downloads
- 100
- Likes
- 8
- Rating
- 0
P
PrintablesIra S
PIR HC-SR501 IR Sensor Enclosure for Arduino and Raspberry Pi
Small enclosure for a HC-SR501 PIR Infrared Sensor. Enclosure includes notch for use with a small cable tie to secure the cable so it won't pull out. Additional hole below the sensor hole is for an optional LED if you want to add one to…
- Downloads
- 94
- Likes
- 11
- Rating
- 0
P
PrintablesMark B
Wemos D1 mini with shield, PIR (HC-SR501), DHT22 and 3 leds
Holder for D1 Mini with shield and LEDs. Optional separator that can be wrapped in Aluminium foil to provide additional shielding
- Downloads
- 72
- Likes
- 4
- Rating
- 0
P
PrintablesChristian Fornes
Master volume knob Onkyo TX-SR501E
50mm OD 27mm Tall Volume knob for 6mm potentiometer shaft.
- Downloads
- 57
- Likes
- 5
- Rating
- 0
P
Printablesebarnes
SR501 Motion Sensor Case
This is a case to hold the SR501 Motion Sensor for prototyping/DIY projects. It snaps together and requires no glue. I made it to support my Inventr.io Projects. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
- Downloads
- 50
- Likes
- 3
- Rating
- 0
P
PrintablesBantje_k
3D Printed Motion Sensor Case (ESP8266, USB-C, ESPHome, HC-SR501)
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
- Downloads
- 45
- Likes
- 7
- Rating
- 0
P
PrintablesNotLikeALeafOnTheWind
8020 mount HC-SR501 Infrared Distance Sensor w-cable tie start v2
A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesTadeas.Grohmi
HC-SR501 PIR sensor case
There is hole for some cables and also there is space for neodymium magnet. Im using esp8266 and ESPhome. Made for wall mounting
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
PrintablesMalaMaker
HC-SR501 PIR Motion Sensor Housing (w/ moisture seals)
This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable. Hardware:…
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
Printables
3D Printed Motion Sensor Case (ESP8266, USB-C, ESPHome, HC-SR501)
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
P
Printables
HC-SR501 PIR Human Motion Sensor
This enclosure is engineered for a precision fit around the standard HC-SR501 sensor module. Design & Material: The case features a minimalist cubic design, likely printed in PLA or PETG. The bright yellow color makes it highly visible…
P
Printables
Bewegungsmelder HC-SR501 Gehäuse MK1
http://www.amazon.de/Foxnovo-3V-5V-10DOF-9-Achsen-Attitude-Indicator-L3G4200D/dp/B00PRFPYI6?ie=UTF8&psc=1&redirect=true&ref\_=oh\_aui\_search\_detailpage Category: Other
P
Printables
Minimal Case for the IR-Sensor HC SR501
A minimalistic case for the Infrared-Sensor Module HC SR501 . Has holes to reach the trimmer for sensitivity and output pulselength. Print Settings Printer: FIashForge Dreamer Rafts: No Supports: No Resolution: 0.20 mm Infill: 100%…
P
Printables
Magnet Holder For SR501 Pir Sensor
I made a bed light where a sensor is used to detect movement, which should be located at the bottom of the bed, near the place where the legs go down. Over time, it became clear that this sensor was being knocked off its place by both the…
P
Printables
HC-SR501 PIR Human Motion Sensor
This enclosure is engineered for a precision fit around the standard HC-SR501 sensor module. Design & Material: The case features a minimalist cubic design, likely printed in PLA or PETG. The bright yellow color makes it highly visible…
P
Printables
Box for PIR motion sensor HC-SR501
A box for the PIR motion sensor HC-SR501 Opening for the 3-pins and for the two adjustment-screws see e.g. https://www.electrokit.com/en/pir-rorelsedetektor-hc-sr501 Check this out too ...
P
Printables
HC-SR501 PIR Sensor box
HC-SR501 PIR Sensor box. HC-SR501 IR Pyroelectric Infrared PIR Motion Human Sensor Detector for Arduino eBay Seller : dkjna_ltd Box bolts M3x5mm PCB mounting holes 2mm bolts Video on YouTube:
P
Printables
Enclosure for HC-SR501 PIR sensor board
This simple enclosure is created for HC-SR501 PIR sensor board. It is specifically designed to blend seamlessly with the interior decor and to provide elegant solution for your security system sensors. The main goal was to combine ease of…
P
Printables
Case for HC-SR501
Case for the HC-SR501 Motion Sensor with 3mm Screwholes. Category: 3D Printing