Counting matching models…
The Shell Case is a simple and effective solution for organizing cooling on the ASRock AMD BC-250 module. This snap-on shell allows you to mount a single fan quickly and securely without modifying the card or its case. The model requires…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
The 1.2L Replacement case for DeskMini x300. Basic “slots” styled core that's compatible with the whole DeskNano x300 system. This core fits most coolers, but doesn't fit Wraith Stealth. See if you can print this first, since the other…
Check out my Amazon Page to see what kind of gear I use to make these models! This was designed to be used as a classroom exercise to teach students about 3D printing, math, and design all at once. Print out these blocks and assemble them…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
3D printable cardboard construction screws and handle. I printed the handle with supports. but didn't use any supports with the screws. Printed on a Sainsmart Ender 3 at 0.2mm layer height. It would be nice to have deeper threads but that…
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
ASRock BC250 Complete-ish CAD 3D Model Why Does This Exist? My project required a detailed ASRock BC250 model so I could design custom cooling and enclosure solutions. Every public BC250 model I found was either dimensionally inaccurate…
We printed this at x: 125% y: 125% z: 250% to maximize build plate and make taller for the purpose of a classroom Valentines collection box. .2 layer height. We included files for no text or a simple Valentine's message. You can run an…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
Asrock B450 Pro4 IO/shield. Category: Electronics
Flexible SRO cover. Printed from TPU. Included negative space (if somebody wants to modify). Also, there is a version for hard plastics such as PETG/ABS/PLA. Category: Sport & Outdoors
Sometimes one simply needs to have a way to store a LOT of phones. Maybe it's a classroom environment. Maybe it's game night at your house and you don't want your friends distracted (or cheating). Maybe it's a family gathering and you…
Here is the Asrock B450m Pro4 IO/shield. Enjoy! Category: Electronics
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
Coral Reef Literacy Classroom Set Seven printable coral models with labeled display bases Overview Bring the wonders of a tropical reef straight to your classroom, makerspace or museum display! This collection contains seven 3-D printable…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
SmallFormFactor.net forum post Design features Smaller than original DeskMini case Increased cooling performance across all components Decreased noise/turbulence More aesthetic choices Filler options for de-soldered VGA systems (see…
Get the classroom refreshed with new pencil-shaped hall passes! I've designed these hall passes to fit a variety of needs (e.g. carrying styles, destinations) and you can customize them further with your color choices and adding text to…
The source marked this model as adult content.
Printing parameters: 0.1 12 walls infill: 0% filament: PA12 or PETG
This is a replacement I/O Shield for an Asrock B550M Pro 4 Motherboard. It should snap into place on it's own. If you wish to add metal shielding, the I/O Shield is 2" tall - the same height as 2" aluminum foil tape used for ducting. It…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Tanjiro Kamado magnet. Category: 2D Art
A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Collection of basic crossroads for wooden train. All models were printed and checked - works good with IKEA set that I have. I think it have to be ok also for Brio set but I didn't check. Added also picture for improved demotions of…
Deckt den Übergang von Heizungsrohren zum Fußboden ab. Es sind keine Schrauben nötig. Der Durchmesser der beiden Rohrdurchführungen ist 16mm. Translation DeepL Covers the transition from heating pipes to the floor. Screws are not…
Hall passes I designed for my wife Pernille Ripp. I used rocketburn11 nurse pendent found here: https://www.thingiverse.com/thing:289124 The Office logo from jakestaby found here: https://www.thingiverse.com/thing:3118823 I recommend…
There are two versions: 30 phones (81.6x19mm slots, 250 x 207 x 70mm) Some phones with thick cases might not fit in this version. 16 phones (86x19mm slots, 176 x 166 x 70mm) This version has a lot of space for many phones.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
ASRock BC250 to AM4 Cooler Adapter Why Does This Exist? I wanted better air cooling for the APU in my ASRock BC250 Steam Machine. The existing AM4 adapters I found did not accurately account for mounting height or the offset processor…
DEMON SLAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Inosuke Hashibira magnet. Category: 2D Art
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
During a renewal process of an elder flat I ran into need of replacement of heating pips covers. Original old and muddy part was for Ø16mm pipes and had a CTC-distance of 50mm. I created several versions: “Abdeckung Heizungsrohre Ø16…
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
DEMON SLAYER FANDOM: Add some Demon Slayer flair Category: 2D Art
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
About a year ago my brother, who is finishing his PHd in Physics, approached me about designing a housing for an affordable spectrometer for use in a classroom and that could be utilized for low grade lab use. It primarily utilized an…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Rectangular Gutter Cover for a common application in wet room drainholes (DE:Abflussrost) Untested first iteration of a parametric design. As si the lid has 142mm square dimension and the seat area tapers down from 136mm square at the…
Mit diesen Klammern können die Kärcher Reinigungsrollen des Hartbodenreinigers schneller gedrocknet werden With these clamps, the Kärcher cleaning rollers of the hard floor cleaner can be dried faster
If you like my work and want to support me, here is the link Buy Coffee These is my case for AMD BC-250. It is designed for the BC-250 motherboard and Flex ATX power supply. The case has space for a heatsink on the backplate, heatsink can…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Rohrclips M25, RohrHalter M25, M25 Installationsrohr Drucken, Liken, Bewerten, Kommentieren.
3D Printed Welding Models: T-Joint & Butt Weld Educational Tool Description: These 3D printed models are designed to visually and physically demonstrate the two fundamental types of welds—T-joint and butt welds—in an educational setting.…
das ist mein erster Make, bei Problemen oder Fehlern schreibt mit bitte das ich was anpassen kann. ich empfehle das ganze in etwas festerem tpu zu drucken. die Konen haben alle eine 2,5mm Fassung für Standard 2,5mm Carbon Stangen, um mir…
The most refined version of a project to produce classroom-durable caddies for craft supplies in my wife's classroom. Printing in two pieces to get the layer lines aligned in a way that will make for both a strong box and a strong handle…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I made these for my wife (who is a teacher) for decorating her classroom. She also does a Back to School tree with ornaments. These are mostly designed to hang from a tree like a Back to School tree, or they could be hung on a string for…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
Dies ist eine symetrische Doppel Heizungsrohr Abdeckung für den Boden. 2x ausdrucken und kann dann ineinander gesteckt werden. Deckt unschöne Löcher oder ausgefranste Teppiche um das Heizungsrohr am Boden ab.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Gerade im Bereich von 90 Grad Verläufen sinnvoll. Silber ist das Original und blau der Druck. Ich empfehle PETG und eine Layerhöhe von .12 oder .16 mm . Keine Stützen nötig.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Français : Cherchant à reproduire une salle de classe pour un exposé de ma fille j'ai réalisé un ensemble chaise + tableau d'école la chaise et le tableau s'impriment en utilisant les supports se complète et mis à l'echelle avec le bureau…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I couldn't find an insert that I was happy with for Tokaido, so I made my own that has most of the features that I was looking for. I believe it will fit all content for the game without any lid lift. Sleeved cards should not be a…
Overview Ultimate Egg Drop Capsule Cub Scouts, Classroom or STEM Projects This project started as a Cub Scouts egg drop challenge for my grandson and turned into one of those builds that was just too fun not to share. A 3D-printed,…
Model of NASA Space Launch System (SLS) rocket for the classroom
AssemblyAid: -For dart cups with a neck diameter of 5mm -For dart shafts with a diameter of 2,5mm Notice: With the assembly aid, the shafts can be glued straight into the cap with superglue! Dart Cup Dimension(mm): Cone_Diameter: 16…
The IO Shield that comes with the X470D4U motherboard does not fit the SuperMicro SC512 series chassis. This solves that problem. This was modelled with a SC512F-350B chassis. Print instructions You may need to slightly shave with a sharp…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is the most complete, easy to print, truthful to original and customizable set of duplo compatible tracks you will find. You can even create your own versions by customizing my onshape model here . (various angles, lengths and…
Hey zusammen, ich habe hier den Griff, das Mundstück und die Endkappe für ein Blasrohr erstellt. Benötigt wird ein 12mm Alu Rohr aus dem Baumarkt mit 1mm Wandstärke, das man auf einen Innendurchmesser von 10mm kommt. Um es wirklich…
Double rosette for heating pipe / Doppolrosetten Heizungsrohr for Pipe/Rohr Ø = 18mm finishing with sandpaper Edit like you want, but don't sell it. Print Settings: Rafts: No Supports: Yes Resolution: 0.2 Infill: 10-15 Notes: Print it…
Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Mit dem Bogen lassen sich 25mm Installationsrohre einfach im Winkel von 90° zusammenstecken. Gedruckt habe ich den Bogen in 45° mit Support.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Print the part face down for the best results! Please consider subscribing to the YouTube channel!
Printed on both the Prusa Mini and the Bambu X1C
Easy print without support. Size 170x175x48mm. Holes for axis 2,2mm. For axis use filament (Just cut cca 20cm filament). Small box size 40x40x40mm.
Blasrohr Mundstück für Außendurchmesser von 20mm und Innendurchmesser von 18mm im vorderen Bereich beträgt der Durchmesser 20.8mm, sodass man Platz für Schrumpfschlauch hat. Die zweite Variante ist kleiner nur 20.2mm für die Verwendung…
IO shield for ASRock B365m Pro4 motherboard. Partially based on Peggy67's B450m Pro4 shield, rebuilt off of Renaud11232's blank shield. I bought a used board that didn't come with a shield and needed to finish the build. STEP file…
This design allows you to improve airflow without modifying the original cooler. When paired with a high static pressure 120mm fan (e.g., Arctic P12 Pro), it provides sufficient cooling for everyday use and gaming. In my setup, CPU…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
I remixed this model from the original Noctua design to fit into my Asrock Deskmini X600 with the Noctua NH-L9a-AM5 fan. It should be suitable for the AMD AM4 and L9i (Intel) version and Deskmini X300 as well. You just need 4x 20mm M3…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A medium sized 3-plant planter adding onto my staircase stylized planters! This one is a moderately sized planter, and you'll need a print space about 10 inches across. -=|More of My Planters!|=-…
I worked with an inner-city teacher looking for a pencil holder that met a few important requirements: made it easy to scan the classroom to confirm that all pencils were stored was satisfying enough to use that students would return…
Description A custom CPU cooler mounting plate and optional backplate stiffener for the ASRock BC-250 . This adapter is specifically designed for the Thermalright AXP120 , but it should work with other CPU coolers that share the same…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
IO Shield for ASRock Z87 Extreme4 Motherboard 2020-11-17: Added second version, more like original one (with holes for audio). Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100%…
