91 models
Zusammen mit dem Designer @MeisterEdel habe ich dieses Testmodel mit meinem Logo entwickelt. Es testet euren 3D Drucker in Bezug auf Toleranz (inkl. Gewinde), Bridging, Maßhaltigkeit, Wandqualität und Oberflächenqualität. Es gibt zwei…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
Maintaining healthy plants and getting effective rooting in a small aquarium can be difficult. You need a depth of substrate that is normally more than the depth of the gravel and it would be nice to be able to swap out damaged / eaten /…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
Om kabels netjes door een kast of bureau te laten geleiden. Er zijn verschillende maten op het gat terug bij te vullen. Ook zijn er verschillende klokboorgaten. 51mm-5mm-64mm en 76mm. For neatly guiding cables through a cabinet or desk.…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna…
Dies ist ein Testdruck zum kalibrieren von der Horizontale Erweiterung. Der Zylinder ist 20 x 20 x 20 mm und die Bohrung hat den Durchmesser von 10 mm. Schichtdicke 0,2 mm, Linienbreite 0,45 mm. Viel Spaß
This parametric box system was developed for the IKEA Skadis pegboard. With the help of FreeCAD , you can easily define and print the desired dimensions of your box or shelf. The design is compatible with the CSD_Salzburg system, ensuring…
Parameters: Printer used: Prusa MK3s Filament: PLA+ I have printed these parts with a single extruder. Imade stops to change the filament in the first 3 layers (0,2mm each). If you need a help to print in 2 color: here you have a…
NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing. Longer mudguard/fender for Kaabo Mantis 10. Comes in variants: Standard (90 mm) | Wide (110 mm) Front | Back Mudguards are longer than the…
What you see is what you get. :-) Data: Build plate adhesion: Skirt Number of lines: 4 Daten: Druckbetthaftung: Skirt Anzahl der Linien: 4 Print Settings Rafts: No Supports: Doesn't Matter Resolution: 0,2 Infill: - Filament: all Category:…
A versatile scraper tool for multiple uses. Compact and easy to handle, this tool removes prints and residue from 3D printer build plates, keeps general surfaces clean, helps with sticker removal, and can even serve as an ice scraper. Its…
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. Top side should be 100x200x2.3mm~ piece of acrylic . All connections are on front panel. Printed with PETG. Mounting ways: double…
Made the printing surface smooth to minimize issues with first layer. Original author BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe…
Small, fast test print that can test many parameters. Recommended print settings I recommend adapting the settings to what you want to test! Here are the settings I used for the model visible in the picture: layer hight: 0,16mm filament:…
English below Beschreibung Das Model ist ein Halter und gleichzeitig ein Gehäuse für das OralB iO 9 Ladegerät. Es funktioniert vermutlich auch anderen Versionen der iO. Mit diesem Gehäuse kann man das Ladegerät einfach direkt in die…
Original Ender3 .f3d converted for FreeCAD
Counterweight designed for 5A yoyo play. This counterweight is the regular 22x22mm dice with a string seat and the 5A logo embossed on both sides. The volume is 9.814 cm3, check your material's density and your infill percentage to get an…
Using this antenna booster you will maximize the performance of the Remote Controller of your DJI Phantom 3 Standard (or Phantom 2). All you have to do after 3d printing this object is to cover the front side of the reflector with…
Picatinny Wall Mount designed with standard Mil-Spec dimensions. I use them to hold reloading accessories to the wall with my other mounts. I am adding more designs here and on my website https://azjake.com/ . I also have the downloadable…
I have an extension pole with a standard threaded end, perfect for a roof rake. This is the actual rake part, ready for mounting onto a pole of any kind, as long it has the correct thread, the kind you'll find on a push-broom. It's kinda…
The shape is simple and easy to print, but it requires support when printing. modify log: 2024/3/15 Slightly adjust the thread of the lower foot to make it easier to assemble. The original design can be combined, but tools are required.…
Enclosure for PCBv4.1 for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. Top side should be 100x188x2.3mm~ piece of acrylic. Printed with PETG. M3 screws 12mm x8
this is a lid for canned Leberwurst or similar. (100mm diameter)
Gedruckt mit PLA in verschiedenen Farben. Eignet sich zum Verbrauch von kleinen Filament-Restmengen.
Piston Ring Compression tool for 4G63 85mm std Made out of pla might need some light sanding just give it some more walls
1" Ring. The mount is a MIL-STD 1913 with a weaver style mount. As you can see it fits a picatinny nicely. I just opted not to make it with placement bolt. Made for my S&W SD40VE, but with more adjustment. I originally made it for my AR15…
To fix something around a screw rod M6円錐形化粧ナット 穴のあいているものをネジの中心に固定したいときに使います KnurledCone: insert an M6 nut DecagonConeNut: insert an M6 nut DecagonConeM6: already M6-threaded Tube-shape support materials are initially prepared in…
M27 / Reducer / Pipe reducer / Adapter / Fitting reducer
Ich habe mir kleine Schilder entworfen, die die Filamentrolle am wegrollen hindern und mir gleich anzeigen wie die Farbe gedruckt wirkt und um welches Material es sich handelt. Die einzelnen Schilder haben den Vorteil das sie leicht…
A MASSIVE round of applause to MirageC; not only for his design but willingness to share it with our 3DP community. Please check out his work and join the fun. This is a remix of the recently released split carriage design for the STD…
Print with 0.4mm nozzle and 0.15-0.2mm layer height. 2.5mm walls and 40% infill at 220°C for maximum strength. Orient with the rail mount side down. Use a support interface for easy removal. Because of the large surface area, some designs…
Scale it 99-101% in x- and y-directions with your slicer to tighten or loosen it. It is a good idea to tap the thread after printing. ネジが緩すぎたりきつすぎたりする場合はスライサーでｘｙ方向に縮小または拡大するとよいでしょう。印刷後にタップでネジ穴を仕上げるのもよいでしょう。
What you see is what you get. :-) Data: Use the preparation test before you start your print (printer warm up). It helps you to ensure that your printer settings are ok. It is only a visual test. No measurement! Daten: Der…
This little form will help you to create cool hot-dogs based on the toast bread slice. How to make? put the form on a slice press to make folding lines put cheese and sausage or anything you like bake or put in microvawe for about 30s add…
Pretty basic but matches my requirements. Best printed in white and painted appropriate colours. The back is hollow and will hopefully let enough light through when lit from behind with LED lamps. I made this for a diaorama but can be…
Du schaffst das! - Oben wird eine Münze mit dem Bild des Ziels eingesteckt, Schieber für Schieber erarbeitet man sich sein Ziel und am Ende kann man mit der Münze stolz sein Ziel in der Hand halten und/oder eintauschen. Beispiel…
Subido en formato de Freecad para adaptarlo a las necesidades de cada uno.
My new Aiper pool robot vacuum has a knob that is hard to turn. I created a spreadsheet-driven FreeCAD file that created the perfect wrench for this. the design is flexible enough to use for other such applications
This headset holder can clip onto all tables with thickness of 34mm. A FreeCAD file is included, so you can change the thickness.
Remix of "Canopy Flasher ASW15/20 by Kareltje" for Std Cirrus and bicycle light from china as donor led and reflector
Printing Instructions 0.2mm layer height, all including 1st layer. 15% infill grid 2 perimeters no supports letter face on plate ABS recommended (and tested) For convenience, a 3mf file for use with Core One is included. It contains all…
Referenzen für Teile aus TPU Bei diesem Testdruck geht es nicht um die Druckqualität sondern um die unterschiedlichen Eigenschaften für Druckteile aus TPU. Der Testdruck wurde komplett im Prusa Slicer konstruiert und kann somit direkt im…
0.15 layer 45% Infill support (tree) nach ermessen
Scale to your desired size, I however suggest to keep the height arround 3mm. Just a few grams of filament is used, ideal for the “last meters” For example, 80mm is arround 5-6 gram (<2 meter of filament) Print it “upside-down” for the…
Just a replacement part for an old Ferrari like Playmobil car (model 3708). Do you like my design? Print, upload your MAKE, receive Prusameters! Please leave a “like” …. ❤ Feel free to follow me …. ✅
Nails on a chalkboard Sound! https://recorder.google.com/e683131f-b969-445c-8522-bc0679318f25 The new STD meme sound: https://mega.nz/file/IuEV3CLS#QVvz2wZjSH-fp4iHWwJwpm4N7nWaDPeZyDpsT-8-M9I Description Translated into English with the…
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
Softjaw clamps designed to hold your receiver securely without marring or damaging the body. Best printed in PETG or PLA+ (I don't reccomend use Carbon fiber or Glass filled Polymers as those are slightly abrasive) Print with 4 walls and…
Age of sigmar Slaves to Darkness Pledge to chaos tokens (eye of the gods)
Dimensions taken from the original brass insert and are approximately 8.7mm major diameter, 12.7mm length with an 1/4" - 20 UNC thread. For use in your designs, not suitable for printing. Other sizes: M2.5 x 5.7 x 4.6 -…
A modified version of the battery bridge to use as a headband close to the center of the head. The original bridge has been made vertical without the angled pitch, it's not flat horizontal across the top of the head to attach padding to…
Nederlandse remix met 2 versies: 📁 Blank versie - zelf personaliseren 📁 "Prettige Kerstdagen" versie - ready to print Aangepast in TinkerCAD met Nederlandse tekst. 💡 Print tip: achterzijde in glow-in-the-dark + 12V LED strip = magisch…
Passend zu einer hebrstlichen Jahreszeit: Kürbis zum ausdrucken. Der Kürbis ist problemlos skalierbar und passt sich dadurch an deine restliche Dekoration an. Es wird kein Support benötigt. ACHTUNG: LEIDER GIBT ES DA DRAUßEN VIELE…
Materials needed 10mm x 5mm x 2mm Magnets 2.2mm x 6mm Screws Stainless Steel Printing Instructions Layer Height: 0.2mm Material: PLA, ABS, ... 2 Perimeters 15% Infill Assembly Instructions Slide magnet into slot Secure with 2.2…
A tested picatinny rail profile to remix into whatever you need. ***This is NOT NATO (metric) pic rail*** This is MIL-STD-1913 (english) Profile!
BR-STD-3 unfortunately breaks away after some time. Simply cut open the proximity token, remove the round token from the center and place it in a new housing.
This flange I designed to fit the ID of 5inch flexible dust collector hose and attaches on the bottom outflow of the superdustdeputy where the material will be collected in your bin of choice. I printed this is Overture ASA orange with .2…
Frau hat sich eine LED Lampe gekauft. Sollte als Deko auf dem Tisch gestellt werden. Schnell war klar, sie sah irgendwie trostlos aus.^^ Also kam die Idee einen Ring mit bestimmten Themen wie Jahreszeiten zu drucken. Diese sollte man…
Skyeliner (Std & HD) - Immortal-T Bottom Mount Category: R/C Vehicles
Welcome to Tectonic! The adventure game pitting players (or teams) against each other on a constantly shifting island. Tectonic is a 3d printed, modular hex-tile board game that can be as large or as small as you want. Each piece can be…
NewScottie.FCStd is FreeCAD source. Adjustable parameters are in items of Top and TissueBox in NewScottie.FCStd, FreeCAD source. Default sizes are: Tissue box: 64.6 mm x 110.0 mm Line size: 4.4 mm x 12.0 mm Cabinet shelf thickness: 16.0…
I recently got a Paint Audio Midi Captain STD MIDI controller to assist with getting more functionality out of my Headrush Core. The label sheet is just a 2-3 layer flat cover, that is reversable. In my pictures I tried making it with…
Just a cute little cookie cutter
The ornament height is 9 cm, width is 21 cm and thickness is 0.2 cm. No support needed. I printed is with 4 perimeters and no infill.
The front idler pulley on my Y axis seems to be bent over as it's only secured to the thin metal shell of the base. This little piece takes the tension off the spindle. Just remove the front brace, slot the part into the existing holes…
Picatinny Mount designed with standard Mil-Spec dimensions. This was made to hold reloading accessories mounted to the bench behind my Dillon 550. The design was inspired by accessories made by https://azjake.com/ .
Picatinny Mount designed with standard Mil-Spec dimensions. This was made to hold reloading accessories mounted to the back of my reloader bench mount behind my Dillon 550’s. The design was inspired by accessories made by…
Printed with sherpa mini print recommendation. (ASA, 01.mm layer hight, 0.4mm forced width) From the eacs04 you need to remove the silicone ring. I recommend to print only the filament sensor part (as in the picture) to see if your switch…
This is a toolhead design for Modix printers , intended for use with the TriangleLabs STD6 hotend , supporting either an Orbiter extruder or a Bondtech LGX Lite PRO . Hotend: https://trianglelab.net/products/std6 Extruder (LGX Lite PRO):…
update !! Sorry folks! I have from number v12 a litle bit changed ,at the top open circel both sides 0.15 mm off.the arm wil better fit and assemble too! . now is all perfect. For mine motorhome,27 years old. an kabet-holder was broken…
A 1:5 STD S5M reduction, printed and run on an S5M 690 belt: a 20-tooth pulley on a 100-tooth wheel with eight spokes. The wheel's top flange prints as a separate ring and glues on over 40 nubs; the 20-tooth pulley prints its flanges in…
Recommended to print top-down so they are nice and flat. I used a smooth PEI sheet and PLA to be extra sticky. Just lay them on top of the buttons and put the lid on the cube, and you're good to go!
Parameters: Printer used: Prusa MK3s Filament: PLA+ I have printed these parts with a single extruder. Imade stops to change the filament in the first 3 layers (0,2mm each). If you need a help to print in 2 color: here you have a…
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
A versatile scraper tool for multiple uses. Compact and easy to handle, this tool removes prints and residue from 3D printer build plates, keeps general surfaces clean, helps with sticker removal, and can even serve as an ice scraper. Its…
A modified version of the battery bridge to use as a headband close to the center of the head. The original bridge has been made vertical without the angled pitch, it's not flat horizontal across the top of the head to attach padding to…
Dimensions taken from the original brass insert and are approximately 8.7mm major diameter, 12.7mm length with an 1/4" - 20 UNC thread. For use in your designs, not suitable for printing. Other sizes: M2.5 x 5.7 x 4.6 -…
Scale it 99-101% in x- and y-directions with your slicer to tighten or loosen it. It is a good idea to tap the thread after printing. ネジが緩すぎたりきつすぎたりする場合はスライサーでｘｙ方向に縮小または拡大するとよいでしょう。印刷後にタップでネジ穴を仕上げるのもよいでしょう。
This is a second version of my first cage design, fully original design, I'd say a second iteration but both are good fit (at least for my use case) Remember to file the pieces and properly post process them if used as body jewelry I…
The SZG-STD-MOUNT is a mounting frame for connecting a standard SYZYGY peripheral to a SYZYGY-compatible carrier. It provides a secure mechanical connection and proper board-to-board alignment when using SYZYGY hardware on a benchtop. The…
This is a russian nesting doll version of a ding ding. To make a ding ding fit, you need to either scale it up to 167%, or down to 60%. I'd recommend adding custom supports on and around the three points on the head where the bottom slots…
The RestDeck was designed after realizing that a lot of us use the Steam Deck in bed, and finding out that gaming for periods longer than 20-30 minutes can become tiresome for many people. There are two ways to use your RestDeck; the…
![DNL Kaabo Mantis 10 Mudguard [std/wide, front/back]](https://media.printables.com/media/prints/306890/images/2689878_5597f1d7-da13-4fc0-90cf-2c543353b984/img_3648.jpg)
![[STD] Picatinny 20mm mil-spec 1913 Profile [Tested] Blank Step File](https://media.printables.com/media/prints/ae83917e-57ac-43c6-b501-ad04cbccfae2/images/13028364_50f09e8e-f44a-4352-a6a9-f1f1cb8b64f7_682f40f9-4c3b-4125-8682-525906da0e1b/std-picatinny-20mm-mil-spec-profile-tested-blank-step-file.png)
