561 models
Festool D27/ D36 suction hose holder - simplify your tool management Where do you currently hang in your suction hose? Print your own Festool suction hose holder and make your everyday work easier and more productive. Do you need further…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Instaid of the millionth itteration (or reupload) of McGybeer's (awesome) cute mini octopus I started from scratch and came up with my own articulated print in place octopus. This one has suction cups and a more detailed skin/shape. I…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
Stworzyłem przyssawki do trzymania szyny festool. Ze zwykłych przyssawek pobrałem gumową przyssawkę oraz metalowe elementy. Zaprojektowałem nowe elementy dopasowane do mocowania szyny festool. Całość złożyłem tak jak w oryginale…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This suction cup is an upgrade to my old design, where this one uses no screws or bolts! it does not hold air forever, as the filament is not soft enough to close completely, but it is very strong for a short period of time. Printing…
Print approx. €6.01–€7.35 excl. taxPreliminary estimate for PETGSource material: PET
This suction cup can be used to lay tiles or moved stuff with smooth surfaces, or just for fun! The only things you need to make the suction cup is a rigid filament, a flexible filament, 1 M3x20 bolt + nut and 4 M5x20 bolt plus nuts. The…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
This is a device designed for efficiently mixing two liquids. Leveraging the Venturi effect, it creates a vacuum suction from the little inlet, that draws one liquid into a high-velocity stream of the other, resulting in a rapid mixing…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
When the gearbox is reassembled rotate the drive wheel in reverse until it's in the neutral position on both sides before installing. So that they synchronize and it doesn't just go in circles.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
3D file of the original IKEA Tisken support to replace the original suction cup with custom hooks, wallmount etc. Example here: https://www.printables.com/model/319150-ikea-tisken-hook Support is needed. See gcode.
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Festool suction hose reel holder - improve your tool management. Can be used in addition to : https://www.printables.com/fr/model/806346-festool-d27-suction-hose-holder…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
I did not have a soap tray in my shower so I created one. Unfortunately, the tile in my shower did not work with the suction cups. But maybe you have a shower that suction cups will stick to. [Suciton Cups Sold Separately] I designed this…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
This mount interfaces with the plastic base plate included with the camera itself via three M3 screws and two nuts. The semi-circular slot on the base allows for the camera to be rotated slightly to either side of perpendicular to get a…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Holder for soap which draining the water instantly. Also work with IKEA's previous Stugvik suction hooks.
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
The grid has 5 mm x 5 mm holes. With a radius of 175mm. And it is designed for firefighting sports.
Print approx. €8.68–€10.61 excl. taxPreliminary estimate for one variant
When your Ikea Tisken sucking cup stops sticking to surface and starts “sucking”, and nothing helps, it is time to replace it for more sticking solution. Print on the smoothest bed you can find, to ensure good sticking of the double-sided…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
This is version 2 of the Qbert suction cup model. I originally made one based on model remixed so it would fit a 45mm suction cup (hangerspace)- My wife pointed out that I had that fancy XL so why can't Qbert have some colour? Now he…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Firefighter suction basket 1:1 220 x 220 x 160 mm
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
KLIKBOT (Zing) Suction Cup Limb Joint Replacement This replacement suction cup limb joint is designed for Zing KLIKBOT action figures. It replaces the original connector used on the arms and legs when the factory part becomes damaged,…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Robust tablet mount for the SAMSUNG Galaxy Tab S7+. It holds the tablet securely and is well suited for smooth surfaces. Ideal for attaching the tablet to the inside of the car roof, directly to the window, or any other smooth surface. No…
Print approx. €6.20–€7.58 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Very strong suction cup mount for the Starlink Mini (22lbs per suction cup). No screws required, secures directly into where the kickstand is. Overengineered for extra strength (if you love your Starlink and your car why not). Great for…
Designed to suck only clean air. For example, from the filament package. Don't try vacuuming dust... Designed to have a firm friction fit. The firmness will depend on the printer and the filament. For the best results, cut the model and…
Diese Absaugung kann in Verbindung mit einer Tisch- oder Ständerbohrmaschine verwendet werden. Je nach Toleranzen des Druckes muss man die Verbindungsstücke ggf. etwas anpassen. Material: PETG This extraction unit can be used in…
Toothpaste extruder with suction cup support base - Exprimidor de pasta de diente con base apta para ventosas
Ein Absperrschieber/Blastgate für eine Absaugung mit HT-Rohr DN40. Zusätzlich werden 4 kleine Schrauben benötigt, um die Teile zusammen zu schrauben. Nicht zu fest anziehen, sonst gleitet der Schieber nicht mehr richtig. Das Teil1 muss…
Starlink Mini 4x Suction Cup Mount Created for these suction cups: https://amzn.eu/d/3gncJJb Printed on Prusa MK3S, Bear 2.1 EXXA Upgrade. PETG, 25% infull, 4 walls.
This 3D printed water toy is the perfect activity for kids in the bathtub. The modular system allows the individual parts to be combined in any way you want, creating new water tracks over and over again. The suction cup attachment…
The design builds on this my base mount: https://www.printables.com/de/model/58753-screw-mounting-for-dremel-3000-schraubhalterung I used it to build myself an arrow cutter with which I cut carbon shafts. (Carbon dust is known to be…
Suction adapter is hold by magnet (3pcs D10x5mm), pipe diameter is 40mm
DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Use customs support (see picture for support placement) Recommend to print with 0.24 Layer height and lower speed for overhangs to avoid using supports. Printed with TPU 1999-2001…
These are suction-end nozzles for the CAMLOCK connector by @PeterH . There are lots of sizes that can use to suit your needs. The nozzle name format is (end-depth by end-width by end-angle) so the 20x80x60 named nozzle has 20 mm depth, 80…
Check out our latest version at www.asana-dental.com Dentists are among the most vulnerable group of the population due to disease infections. The main reason for this is the exposure to infectious aerosol, which arises when drilling…
Placeholder for vacuum bags. This attachment goes in the bag. Is placed under the suction seal and prevents the bag from. Use "tree" as support material and use a slotted screwdriver to smash the material out of the holes Update…
Print vertically to ensure the layer lines don't snag on the carpet.
Starlink Mini Suction Cup Mount for Car, Camper, or Caravan Windows This is a remix of the original Starlink Mini Suction Cup Mount, designed for improved practicality and usability. Key Features: Uses affordable suction cups designed for…
This is my take on a DIY suction hose adapter for the GTS 635 216 bench saw. My vacuum cleaner from Einhell has a hose with an outer diameter of 36mm and an end socket wall thickness of 2mm. This adapter takes both into account and…
This remixed cable spool with attachments for suction cups is meant to complement suction cup based Starlink Mini mounts for vehicles that are widely available on Amazon. It is for vehicles with glass/moon roofs only. Given in vehicle…
This is a suction hose hand grip (like 2.863-012.0) for my Karcher WD6 Premium vacuum cleaner. There are three versions attached. Because of the height for some printers it's shortened for the Ender3 and Prusa i3. It's meant to be printed…
Intended for .2 layer heights, .6 extrusion width. Can be printed from any non-elastomer material but ABS, ASA, or Tough PLA would be preferred. No supports required. Inspired by…
In order to have clean air when airbrushing, I built a suction system that uses a standard workshop vacuum cleaner. To prevent the airbrush paint from clogging the filter of the vacuum cleaner, I added a separate filter before the intake.…
This is a replacement suction strainer for the Sunsun HW-702B aquarium filter. The original can be easily damaged when used in an aquarium with turtles or other pets which are stronger than fish. It should work with other filters that use…
After testing several suction discs for vacuum bags for filament spools and not finding a product that fully met my needs, I designed a custom disc that combines resistance, functionality, and ease of printing. This disc is compatible…
Suction cup hook Hook made from pla or pet-g suction cup from TPU
This Bottle-Holder is for 0,5L NRW Beer-Bottles (check the pictures) with a diameter of ~70mm and a height of ~260mm. It's the type of bottle that's mainly used in Austria, Germany and Swiss. It should stop them from rolling around inside…
This suction clamp adapter is made to fit Makita/Festool-style track saw guides. It may fit others, but I don't have “multiple track saw system” money. I only included one side of the set. You'll need to mirror all the files to get the…
Designed specifically for betta fish to lounge and rest, this model comes in two dimensions: - 100mm x 40mm with slots - 70mm x 40mm with holes It's compatible with screwable suction cups, though alternatives can be used. Printed using…
EN: Next components (flexible hose) i used from model Bosch PBD 40 by ariskilic - Thingiverse update 13.03.2023: I reupload model of original flexibile elements here, because from Thingiverse disappeared. For fixing on drill you can use…
Teile 22 / 22B / 22C Material PLA Layerhöhe 0,2 mm Infill 10 % Support 5% Tree Teil 22A Material TPU95 Layerhöhe 0,2 mm Infill 100 % Support 0 TPU A95 von 3DJake Dieses Filament ist auch druckbar mit Bowden-Extruder. This filament is also…
These are vacuum nozzles for the CAMLOCK system. A few select sizes. The nozzle name format is (end-depth by end-width by end-angle) so the 20x80x60 named nozzle is 20 mm deep, 80 mm wide, with a 60 degree end. 20x20x45 20x80x60 30x60x30…
This bird feeder is completely print-in-place (with supports) and requires one suction cup to attach to a window. I suggest using Organic supports in order to print the lip on seed bucket and the drainage holes.
This is a suction cup aquarium planter I designed for small plants to be planted on the glass of the tank. This is very useful if you desire to plant a aquarium plant that needs a different substrate or if your plant needs to be raised…
suction adapter mount on the base "rod"
Designed to attach to those standard suction cups that come with all of the aquarium equipment.
You know what the world really needed? That's right, another soap dish. I couldn't find one that was quite what I wanted, so I made exactly the right thing. This is intended to mount to a shower wall using suction cups. The design allows…
This is an aquarium (or other glass surfaces) mount for temperatur sensors DS18B20 / DS18S20 (6x50mm). the sensor just snaps into the mount and there you go. you need two suction cups (small ones) like the EHEIM 6803…
A suction cup mount for the FasTrak Flex (2022). Easy access to adjust the number of riders. I recommend 3 walls at 20% infill. If you're in a hot area, I recommend PETG or don't leave it out in the sun. Worked perfectly with the 20mm…
Biesse vacuum suction cups 54mm Print Settings Printer Brand: Raise3D Printer: Pro2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.25 Infill: 15% Category: Other
This part locks the suctions cups in place so they don't accidently come off. This video shows how to use this part. The EEW Nano 2 is available here: https://www.dreamingrobots.com/product/eew-nano/
Many years ago I designed and released plans for a open-source seed cleaner made from wood, which turned out to be very popular & is now in use in many countries: https://www.realseeds.co.uk/seedcleaner.html This is an adaptor for the…
Here is a shelving and storage system that uses suction cups to hang from any smooth non-porous surface such as glass, tile, or polished metal. Suction cups can be quite the eyesore so what makes these special is that they conceal the…
This model serves as a replacement for the original adapter. It is available in two variants: a faithful replica of the original design and an optimized version specifically tailored for printing. The optimized model accounts for reduced…
This is a print for a mount to hold a starlink standard size dish to the underside of a moonroof or sunroof with suction cups. The link for the suction cups used on amazon is listed below. No additional hardware is needed. The mount is a…
A removable dust suction hood for the table saw BOSCH GTS 10 XC is suggested. A detailed description can be found within the download-files.
When I bought my vacuum pump to start preserving my filaments in better conditions I felt forced to select this tiny pump due to its attachment which ensured me that I could use standard vacuum bags (those with a valve mechanism). As…
If you drill into your walls, or floors, you need to get the dust out for the dowel or mortar to set properly. Commercial borehole cleaners cost 40€ and more. This one costs cents to make. If you print it with PLA or PETG, be careful…
Check out our latest version at www.asana-dental.com This is a version without retractor, which is more suited work work with a dental dam.
I needed to suck some water from a hole using a drill pump but wanted to just get water, not leaves etc. This prints easily, standing up. I used supports around the Garden fitment, but maybe they were un-necessary. Thanks to ‘Done’ and…
Maturity: Good 3 prototypes. In use since 2020/04. Heavy duty drill helper with suction channel that can be connected to a dry vacuum cleaner. Typically useful when you use some long SDS bit to drill perpendicular holes in bricks,…
This is my take at a Stratux case remix. I wanted something better than the plastic injection case sold on Amazon ( https://amzn.to/2VFRRFG ). My goals are: to shorten overall height, have it easy to mount and unmount (portability), and…
For wet & dry vacuum cleaners that don't come with a wet nozzle(mine didn't) this will work. Inner diameter is 35mm and about 110x10mm at the "suction end", check your's or modify accordingly, thickness increased from 1.5 to 2.0mm for a…
I was handed down an ipad air 2 and i want to use it for long road trips for navigation and movies for the passengers! Its a three piece design where i super glued the ipad holder to the mount behind it. Hardware: m3x40 bolt with hex nux…
Check out our latest version at www.asana-dental.com Another remix of my previous dental aspiration adapter. This version has a hook for a dental dam (Kofferdam).
I used this motor: https://www.amazon.com/dp/B0F21RW7MJ?ref=ppx_yo2ov_dt_b_fed_asin_title The screws to mount the fan axle and motor are M3 screws. I'd recommend get a M3 Screw set. I used a shitty Kingroon 3kps Pro, the print quality is…
A towel hook with a tpu suction cup. To assembly it you need insert the suction cup to the puller and then add the case. Assembly Video: M3 20mm screw is also required. Important: The suction cup is printed with TPU 95A on a smooth build…
This is an accessory for newer model Dyson handheld vacuum cleaners. It has a short length and a 13.75 mm OD tip. Before printing verify the connection onto your Dyson model. For example it should include the two guiding rails on the side…
Are you also completely disturbed by those non-interchangeable sizes of dust extraction hoses? Nothing fits nothing. I'm done with adjusting regular PVC pipes on the lathe and fixing things with duct tape, so I've made these adapters.…
Edit 02.04.2021: Verstärkung des Oberteils, insbesondere im Bereich der Spindelklemmung Edit 28.11.2019: Ich habe die Absaugung aufgrund der eigenen Erfahrungen nochmals verbessert (V2): 3-teilige Konstruktion - so lassen sich die Teile…
No Supports Suction Cups used - 2.5inch https://www.amazon.com/gp/product/B07X8THYRJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
DIY Suction Bell: Homemade and super effective! This 3D printed suction cup made of flexible TPU A95 guarantees quick and clean removal of clogs. I welcome all feedback! I'm eager to see your finished models. Happy printing!
My whife choose the design, and I have to redesign the wall-mounted to use the suction cup from the other holder. How I Designed This Redesign the wall-mounted to use the suction cup Using Fusion 360 Category: Kitchen & Dining
Intro and instruction video. https://rumble.com/vbx3i7-3d-printed-gopro-hero5-hero6-hero7-magnet-and-suction-cup-mounting-kit.html I was in need of a way to mount my GoPro in multiple places without hauling around a tripod, no luck. So I…
Yep, I needed a spot to hang my shower razor. Do I have a ledge I could use? Why yes, yes I do - but what fun would that be. Anyway, I knocked out this rough prototype, possible changes to come. I'll reprint in black to match the other…
EN: The suction basket serves as a filter for solid particles with a diameter of over 1.5mm and is mounted on a garden hose with an internal diameter of 1 inch. Since garden hoses do not have a very precise diameter, I am attaching two…
It was made to be printed with nozzle 0.6/0.8mm Becouse i care about practical more than visual, i have printed it with: nozzle 0.8mm layer height 0.4 supprts only touching plate it took about 1h55m on the photo while printing is print…
v3: similar to v2 but added a flange to prevent the fork from falling and potentially damaging the car's roof/windshield while positioning the bike. Still should print without supports. v2: Beefed up the sides a bit and made it printable…
I needed a smaller nozzle for my handheld vacuum, so I designed an adapter and a nozzle. The adapter should be printed with a flexible filament in order to have grip on the original vacuum nozzle, while the new nozzle can be printed in…
Dental Suction Tip Adapter from high to low
#### This is my arrow cutter for cutting carbon arrows with a Dremel 3000 or 4000. I use it to cut arrow shafts between 27 and 31 inches, with a diameter between 4 and 7 mm. It is my second, improved version and it works very well for me.…
This EZPass mount is designed for the newer slim profile rectangular model. This holder is designed to use common suction cups instead of hook and loop fasteners. I hate using the double-sided tape mounts because they leave such a sticky…
Simple DEwalt 7485 vacuum adapter to connect chip vacuum cleaners with 100mm tube diameter Semplice adattatore aspirazione DEwalt 7485 per connettere aspiratrucioli con diametro tubo 100mm
Dies ist mein "Absaug Dingens V3" für die Standbohrmaschine. Die Absaugung der Späne vom Forstnerbohrer funktioniert prima. Es sind 4 Versionen enthalten mit verschiedenen Innendurchmesser des Absauganschlusses. (35, 38, 40 & 44,5mm) Hier…
Simple sponge holder with suction cup mounting. Dimensions are optimized for bigger kitchen sponges. Suction Cup Details: Head diameter: 14 mm Neck diameter: 10 mm i use this:…
INFO: Ikea has changed the design of the Tisken suction cup and is no longer compatible with this model without modification. The new suction cups are not separable from the rest of the hook. Just be ware which version of the suction cup…
Use case Suction cup holder for action cameras are significantly more expensive than suction cup holders for household usage. Which does not mean that those for household applications are necessarily worse in quality. This part adapts a…
Ein Absaugadapter gebogen fuer eine Scheppach Dekupiersaege von Innen 35,2 mm auf Aussen 40 mm.
This was designed to be mounted to glass with three industrial suction cups. It had to be robust enough for 6+ G's acceleration, and rapidly stow-able, and take up as little space as possible. The base includes a cavity for a 4500 mAh 6S…
I created this Suction Hygrometer Holder to hold (using two 20mm suction cups) the common rectangular hygrometer (humidity / temperature sensor) that is available from dozens of vendors on Amazon, AliExpress, etc. It is designed to be…
This is a sleek window mount for the FasTrak Flex and Flex CAV with protruding passenger-count wheel. It is designed to work with (qty 3) 0.8" mini clear suction cups . Remove the velcro tape from your toll tag and then push the tag all…
![Soap Dish, Suction Cup Mount [Parametric]](https://media.printables.com/media/prints/79964/images/858559_bfa0e166-8e54-4a79-83eb-64416c2419fe/eba1c12c835da4a033030c1d8c415866_display_large_79.jpg)
