Counting matching models…
This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for PETGSource material: PET
Sunshade for a rifle scope. Moreover, it adds a protection for a scope lens and a nicer look :) Uploaded model (both versions) has these parameters: inner diameter: 57,0 mm outer diameter: 66,0 mm I use this sunshade for my rifle scope…
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for PETGSource material: PET
This model contains the three initiative tokens needed to play Star Wars Unlimited. The first player token is the only token needed for 1 vs 1. The multiplayer “ Twin Suns ” game mode needs the “Plan Counter” and “Blast Counter”. These…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
This is a replacement for the clip that holds the car sunshade. The fourth picture shows the original part (left) vs the 3d printed one (right). Although made specifically for a FIAT Grande Punto , it can be expected to fit other car…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
A simple hook to replace a broken one of a Renault Laguna rear sunshade. Not an exact replica of the original , probably best to print in a material that is more resistant to heat like PETG or even ABS since it gets pretty hot inside cars…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
5 Color Hueforge model of a mech in a field at sunset. DO NOT RESCALE Ive included a small 100x100mm and a large 200x200mm model slicing is the same for both Colors used: (all matterhackers build series /polymaker (I do not know the…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
EN: The sun visor is made for a Technaxx TX-28 but may also fit other devices. As the camera occasionally overheats in strong sunlight and only starts up again when the temperature drops, I designed this sunshade. 1 model is split and can…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
I have created the sunscreen holder shaped to be fitted into the makeup drawer that has curvy angles.
Print approx. €6.68–€8.17 excl. taxPreliminary estimate for one variant
Darth Vader loves watching sunrises (and sunsets). Hates long walks on the beach, however. In the early morning hours, before the galaxy awoke, Vader would venture to a secluded spot on a remote planet, far from the prying eyes of the…
Once I created my iphone dedicated sunshade I decided that it's time for universal one. So, this one is a three part print in two size options: normal - fits iphone X/XR/12/13/14 size phones (regular versions) MAX - is designed for big…
Another Mavic Air 2 sunshade V1: fit for Samsung galaxy S9, but should work for most. Your phone must be at least 55 mm width and do not exceed 160mm length. V2: fit for Samsung galaxy S21 ultra, but should work for most. Your phone must…
A Vintage Futuristic Look. With 3d printing You Can. Two Version Available Print instructions Print Best with PLA no Support 5% infill For a snug fit, you should scale model so the width of the 3dmodel is same as width of the head. (I…
Sun screen and mounting bracket for a Humminbird Helix5 unit. The sunscreen clips on to the unit (from the back) and can easily be removed again. Printed in PLA. No supports required. STEP files are included. OnShape document is here:…
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
LED tealight holder resembling a Sunset Hill . Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. I printed the model on the side (see photo), and in line 15 I added a color change to evoke a…
I have added a sunshade to the design of Kytu. ( https://www.thingiverse.com/thing:4446393) Unfortunately, you have to print it with supports now. So a little bit of cleaning in the end is necessary. I printed it with 15% infill, 3…
Should fit Garmin striker 4 plus and cv plus. Attaches without adhesive and prints without support.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Orange At layer #18 (1.52mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.
I designed a Red Dead Redemption style model for you. It turned out to be a successful, high collectible value model. I printed it myself and it came out very nicely. I would be happy if you added it to your collection as well. Note: I…
I made a sunshade for my new DJI Mini 2 remote. It clips onto the rails of the phone holder and the top slips down over the top bracket. It's fairly secure though is does wobble a little since the sides are free-floating. Made to fit by…
sunscreen found on Tingiverse for my motorbuddy.
A futuristic looking shade for your special event. Other Apex Shades Styles. https://www.prusaprinters.org/prints/105385-apex-03-sunshades https://www.prusaprinters.org/prints/25075-apex-2001-sunshades
There is a thin gap between the frame and the display separating the whole frame from touching the display.. Use some thin felt or fabric to apply. Evenso I did not manage once to scratch the screen with the PLA printed Frame it cant hurt…
There are a number of sunshades for various Lowrance Hook Reveal models, but I really wasn't satisfied with them for one reason or another. Some of my dislikes were multiple pieces, flimsy looking, prevented angle adjustment, and most…
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
I wanted a sun shade and killflash for my Eotech Holosights that was robust and could take a literal beating as well as stand up to heat concerns. Print with hex down, use tree supports. I recommend PC, Nylon, or HTPLA. Don't cheap out,…
This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…
No more hassle with rubber bands, velcro, tape or clamps to attach the sunshade to the zumo. Install once and it's ready for the whole season. A recess is provided to open the back without disassembly. The power button is also easily…
Replacement part for a Fiat Siena sunshade, the original part broke and I decided to create a 3D piece and print it Print Settings Printer: Vitofeli Grand X3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 40 Filament: Print…
Recreation of the sunsword from the CoS book with a few personal touches. You will probably have to split it into 2 or 3 parts to print it easier.
I used Nuka Cola Clock by techoutreach for the cap shape but scaled it down and made the hollow in the back conical so its heavier. It'll still accommodate a clock mechanism 65x65x20 or smaller, but there's no hole in the back for…
Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon. This sunshade is an…
a replica of the Transformers CW sunstreaker gunsword for transformer toys. Best printed on an SLA/DLP 3D printer. Check out all of my transformers guns! Transformers CW sunstreaker gunsword - https://www.thingiverse.com/thing:3693685…
Better to print it in PAHT-CF (or ABS) for better resistance to summer heat! (not in PETG or PLA)
Remixed from RobSmo's https://www.printables.com/model/305355-dji-mavic-air-2-2s-mini-2-sunshade
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA+ Creality CR Black Transmission Distance: 0.5 PLA+ IIID Max Navy Blue Transmission Distance: 3.6 PLA+ JAYO Meta Red Transmission Distance:…
Print with support, Remove originak radio cover and replace.
The Netatmo outdoor module is supposed to be placed in a shady place with sufficient air flow for accurate readings. Ideally, it is placed high above the ground and not too close to buildings. However, it's not always easy to find a spot…
This is a filament painting of a female samurai at sunset. It was made by using Midjourney. Printed at 200x200 @ 2.80mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed…
A sunshade for the original mavic mini. No supports are needed and it takes around an hour to print both parts. As this is mostly friction fit, I have included 2 versions of the bracket with different tolerances. You can also adjust the…
Sunshine pencil holder Great gift It slots together and holds 9 pencils Print the sun standing up as it is in the stl. I printed the sun with supports touching base-plate to make it extra secure as I was printing fast. @3DPrintBunny
Lake, mountains - wall art, easy to print
This little clip attaches a blanket or towel to a stroller to provide some shade. The three models have a slightly different gap for one of the slots, such that they fit various strollers. I printed it in PLA with a 0.6mm nozzle at a…
Gun for Transformers Siege Sideswipe or Earthrise Sunstreaker. Has a 5mm peg so compatible with all modern 'bots. Modelled after the Masterpiece Sideswipe weapon and scaled down appropriately to fit Siege/Earthrise figures. Print Settings…
I had to make the line thicker to be able to print the details with a 0.4mm nozzle, afterwards I filled the lines with paint and removed additional paint with IPA.
Sunshade for Mybo Ten Zone scope. You only need a rubber band to hold it in place Pare-soleil pour scope Mybo Ten Zone . Vous avez seulement besoin d'un élastique pour le faire tenir en place Print Settings Printer Brand: Alfawise…
This is a filament painting of a Heron at Sunset. It was made by using Midjourney. Printed at 110x220 @ 2.64mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed Red…
The original model was very nice, but I decided to beef up all of the parts for a little extra strength which may or may not have been necessary. The following changes were made: 1) Beefed up the top and bottom rings, the pillars, and the…
Threaded to fit the Arken EPL4 4-16; may fit others, unsure if Arken uses the same thread pattern on different optics. This requires a well tuned printer. I was able to get good quality threads on my Bambu P1S w/.4mm nozzle. Printed in…
This is a replacement bolt for a Nolan N70-2X helmet. The sun protection peak on top of the helmet uses a central M6 bolt made of plastic. The structure of helmet requiers for accessories to break off in case of a crash, therefore the…
This is a compact enclosure for a SmartHome SunSensor to control shaders via HomeAssistant using an ESP32-C3 WLAN Controller and BH1750 Sensor. The sensor is powered via USB C port. The enclosure printed on PrusaCore One in two parts…
Token Box that fits the official Gamegenic PREMIUM TOKENS PRO plus EXPANSION PACK and 18 additional 12mm dice. Uses six 6x5mm magnets to hold the lid. The diceplate goes on the bottom and the dice on top of it, pushing through the hole in…
Basically combined a sunshade clip and sun glass holder for those of us with sunshades and sunglasses in our MY's. I'm sure there are a zillion ways to refine this and further improve it but it seems to work. Any heat tolerant filament…
Sun shade designed for iPhone 12 (and others when scaled - see note below). It provides better visibility in direct sunlight. As seen on pictures I tried both PETG and TPU materials. I think that TPU is better as it fits the phone nicely,…
The Charming Bloom Vase brings brightness and joy into any space with its radiant sunshine yellow tone. Its geometric diamond texture creates a playful yet elegant surface, reminiscent of blooming petals captured in a modern sculptural…
Extra clips in case you lose some or just want to secure it better. I found that having two more (six total) works well - two on the front edge and two on the back edge since those edges bow a little. Print instructions 3 perimeters no…
This is a filament painting of a beautiful island at sunset. It was made by using Midjourney. Printed at 119x200 @ 2.88mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black…
creditos ao original https://www.thingiverse.com/thing:2962608/comments
Small file for sunshade holder in Fiat Panda. I recommend printing in PET-G due to temperatures in summer. It is compatible for sure with Fiat Panda I. let me know if it is compatible with other car models.
Renault grand scenic hook for rear sunshade Print Settings Printer: Custom Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 100 Notes: Support only to bed. Print as default downloaded orientation to maximize strenght. Category: Automotive
A detailed Star Wars Episode IV inspired bookmark, designed to be super thin. No page damage, no hassle, just a cool design. I'm a big fan of the shadows this one casts! Test printed using an FDM printer. As I'm going for very thin…
As requested by a Reddit user. Should fit the Ray-Ban Meta sunglasses. A prototype, work in progress!
Bogg bag type attachment to hold bug spray &/or sunscreen. Tight snap, but the spray bottles can also just slide in - it can be installed horizontal or vertical which ever is the best alignment for the holes. This uses a screw-type…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
I use these clips on our stroller to protect our child from the sun. So far, I have printed numerous clips for friends as well. I am sharing the design here. Enjoy! Protect your little one from the sun with this innovative 3D printed…
Image by Midjourney Hueforge 4 colors black red yellow whitematte a small 10x10cm file just to try Hueforge.
This is a filament painting of a beautiful sunset on an island. It was made by using Midjourney. Printed at 133x200 @ 2.8mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black…
Update: Added speedo sunshade! A fairly simple model to cover the dashboard and provide some protection from the sun, when my clear windscreen arrives. Fit is perfect slide on, won't come out but probably won't stay on either. STEP files…
Created my own attachment arm to attach the Netatmo Sunshield to my brick wall.
Introduction: This is a mechanical sculpture meant to illustrate the mechanisms involved in getting two things to spin in opposite directions. It's pretty to look at, and educational! Assembly: Things you'll need: Super Glue/Plastic glue…
I had trouble making the sunshield from the descriptions in the other models. I created this as a template that can be glued in place using either Elmer's Glue or CA Glue. The spars can then be cut off with a pair of wire cutters and you…
I made this hood for Hikvision camera DS-2CD2T47G1-L with 6mm and 2.8mm focal lengths to prevent sunlight to burn into the picture when sun is rising, with camera looking to East. No supports needed. Use some UV-resistant material…
This is a remix of https://www.thingiverse.com/thing:2183414 by the thingiverse user dr_lecter, but without glue involved. I printed the part with PETG, 0.2mm layer height, 15% infill, and default prusa slicer settings. Use the…
Everything that floats in our above ground pool would work its way into the skimmer so I created. Printed in white PCTG
Original artwork by Akshay Saini . Be sure to check out his other pieces of work on Instagram @akssmax .
Its specifically made as a replace for a chevrolet agile 2012. The desing its simplified for easier instalation using the same screw as the original.
Replacement part for Sunshield clip in Jaguar XJ40. Before print rotate part for 90 for more strength. PETG or SDS recommended
Nozzle 0,2/0,4 (0,2 recommended) 100% infill, or print as a solid 0,1 First layer 0,15 the others I printed with polymaker's polyterra in orange at 215° 50mm/s overall It fits any 6 series recorders from Sound Devices, it just snaps in…
This is a filament painting of a cowboy at sunset. It was made by using Midjourney. Printed at 200x200 @ 3.04mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black PrintBed Grey…
For BMW motorbikes, there are unofficial smartphone holders with two USB charging ports that fit onto the original BMW navigation device holder and connect to the 12V power supply via the contact circuit board on the back. For these…
Japanese Sunset with Mountains. Use M600 for color change Solid Infill Recommended layer height: 0.2mm Start with white or light gray filament @2.20mm -> change to black filament @2.80mm -> change to red filament Perfect to use as a table…
Replacement pull tab for the sunscreen in the sliding doors of a 2022 Honda Odyssey. It's not a perfect replica, but it works and it's not too much different than the original. Recommend printing in PETG or ASA with 100% infill.
Printed in white PETG and did well for an entire baseball season. Please pardon the picture. It got stepped on at one point and broke and was reattached with hot staples. Still going strong though!
Sailing into Sunset Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA EryOne Matte RUBY RED Transmission Distance: 1.5 PLA EryOne Rose Red…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
For BMW motorbikes, there are unofficial (Chinese?) smartphone holders with a Qi wireless charging coil and two USB charging ports that fit on the original BMW navigation device holder and connect to the 12V mains via the contact circuit…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to rojo At layer #12 (1.04mm) swap to amarillo At layer #16 (1.36mm) swap to White for the rest.
For a parasol of unknown brand, 50mm stem. Lock handle and two metal pins are reused from the original part. steel pin holes needs to be drilled to 6mm Print instructions Best strengt of printed with the lock arm horizontal. see 3mf. I…
I created a case that allows you to create a multicolor TPU case without the need for AMS or AMS 2 Pro.
Beschreibung Der Sonnenschutz ist stabil und trotzdem flexibel. Er wird von hinten auf das Navigationsgerät gesetzt und kann im montierten Zustand nicht nach vorn über das Gerät abgezogen werden. Montage: Gerät an einer Schmalseite…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 167.86x235mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
This Smartphone Sunscreen Case shields your phone from the sun - helping to prevent overheating while you enjoy the outdoors - whether you're at the beach, the pool, or just hanging out with friends on a sunny day! Fits many (non-jumbo…
Comes in two sizes, do not re-scale in your slicer. This print uses 5 different colors and they're changed at layer height. Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:…
A sunshade for generic red dots. Use some double sided tape if it has too much movement.
I made this model after an orignal part of my window cover in my boat. It is used to hold a sunscreen / window cover open. I do not think it is specific to any brand, model or even a boat and possibly found in caravans and campers also.
I split the model into parts to allow for easy non-support printing and push-pin assembly. This model was chosen to be as accurate as possible to the shine model, and as easily printabe as possible to prevent blemishes and waste from…
The idea came to life poolside, when I saw my wife placing her drink under the chair to shield it from the sun. This articulated sunshade umbrella is a compact, functional 3D-printable model designed to bring adjustable shade and style to…
🏔🌅 WallArt – Mountains Birds Sunset Bring the peaceful beauty of a mountain sunset into your home with Mountains Birds Sunset! This atmospheric WallArt combines majestic mountain scenery, a beautiful sunset and birds flying freely across…
This kit is for the Sunstreaker mold. For the arms, lower leg and spoilers they'll have to be removed for transformation. I am working on fillers that don't have to be removed but that will may be a while. The spoilers were modeled to be…
