Liczymy pasujące modele…
Darth Vader loves watching sunrises (and sunsets). Hates long walks on the beach, however. In the early morning hours, before the galaxy awoke, Vader would venture to a secluded spot on a remote planet, far from the prying eyes of the…
Once I created my iphone dedicated sunshade I decided that it's time for universal one. So, this one is a three part print in two size options: normal - fits iphone X/XR/12/13/14 size phones (regular versions) MAX - is designed for big…
Another Mavic Air 2 sunshade V1: fit for Samsung galaxy S9, but should work for most. Your phone must be at least 55 mm width and do not exceed 160mm length. V2: fit for Samsung galaxy S21 ultra, but should work for most. Your phone must…
A Vintage Futuristic Look. With 3d printing You Can. Two Version Available Print instructions Print Best with PLA no Support 5% infill For a snug fit, you should scale model so the width of the 3dmodel is same as width of the head. (I…
Sun screen and mounting bracket for a Humminbird Helix5 unit. The sunscreen clips on to the unit (from the back) and can easily be removed again. Printed in PLA. No supports required. STEP files are included. OnShape document is here:…
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
LED tealight holder resembling a Sunset Hill . Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. I printed the model on the side (see photo), and in line 15 I added a color change to evoke a…
I have added a sunshade to the design of Kytu. ( https://www.thingiverse.com/thing:4446393) Unfortunately, you have to print it with supports now. So a little bit of cleaning in the end is necessary. I printed it with 15% infill, 3…
This is another fleet for the game A Billion Suns. There's one of each type of ship and they're compatible with the flight stands: https://www.thingiverse.com/thing:4772265 and https://www.thingiverse.com/thing:4796867 PLEASE NOTE: Apart…
Should fit Garmin striker 4 plus and cv plus. Attaches without adhesive and prints without support.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Orange At layer #18 (1.52mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.
This model allows you to locally produce/replace the ‘clips’ that hold in the various Telsa Model 3 and Model Y sunshades that are sold on Amazon. Typically, these sunshades are chinese made and are either missing their clips, dont…
This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…
I designed a Red Dead Redemption style model for you. It turned out to be a successful, high collectible value model. I printed it myself and it came out very nicely. I would be happy if you added it to your collection as well. Note: I…
I made a sunshade for my new DJI Mini 2 remote. It clips onto the rails of the phone holder and the top slips down over the top bracket. It's fairly secure though is does wobble a little since the sides are free-floating. Made to fit by…
Gearwheel for grouw adano, sunseeker robotic lawnmower wheel gearbox. Print i PLA with 8 walls 40% infill, can be printed with a 0.4 mm nozzle and arachne wall generator. Alternatively a 0.2 mm nozzle.
sunscreen found on Tingiverse for my motorbuddy.
A futuristic looking shade for your special event. Other Apex Shades Styles. https://www.prusaprinters.org/prints/105385-apex-03-sunshades https://www.prusaprinters.org/prints/25075-apex-2001-sunshades
There is a thin gap between the frame and the display separating the whole frame from touching the display.. Use some thin felt or fabric to apply. Evenso I did not manage once to scratch the screen with the PLA printed Frame it cant hurt…
There are a number of sunshades for various Lowrance Hook Reveal models, but I really wasn't satisfied with them for one reason or another. Some of my dislikes were multiple pieces, flimsy looking, prevented angle adjustment, and most…
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
One of each type of the 13 types of ship required to play A Billion Suns: http://abillionsuns.space/ They were designed in Tinkercad back when I first read the beta rules for the game. I was aiming for a "Spaceship Train" kind of feel,…
I wanted a sun shade and killflash for my Eotech Holosights that was robust and could take a literal beating as well as stand up to heat concerns. Print with hex down, use tree supports. I recommend PC, Nylon, or HTPLA. Don't cheap out,…
Sunshade for a rifle scope. Moreover, it adds a protection for a scope lens and a nicer look :) Uploaded model (both versions) has these parameters: inner diameter: 57,0 mm outer diameter: 66,0 mm I use this sunshade for my rifle scope…
This model contains the three initiative tokens needed to play Star Wars Unlimited. The first player token is the only token needed for 1 vs 1. The multiplayer “ Twin Suns ” game mode needs the “Plan Counter” and “Blast Counter”. These…
This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…
This visor is very light, prints in one piece, and snap-fits to the arms of the glasses. Worn on the glasses protects your lenses from the direct sun rays, giving you clear vision of whatever is happening on the beach (or you can wear a…
No more hassle with rubber bands, velcro, tape or clamps to attach the sunshade to the zumo. Install once and it's ready for the whole season. A recess is provided to open the back without disassembly. The power button is also easily…
Replacement part for a Fiat Siena sunshade, the original part broke and I decided to create a 3D piece and print it Print Settings Printer: Vitofeli Grand X3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 40 Filament: Print…
Sunshine 101 is a Spectroheliograph (SHG) based on 2pcs of CS lens 75mm F/2.8. It was optimized for Sun photography on Hydrogen Alpha absorption (Ha) line. It's required some mechanical parts from standard telescope accessory and easy to…
This is a replacement suction strainer for the Sunsun HW-702B aquarium filter. The original can be easily damaged when used in an aquarium with turtles or other pets which are stronger than fish. It should work with other filters that use…
Recreation of the sunsword from the CoS book with a few personal touches. You will probably have to split it into 2 or 3 parts to print it easier.
I needed more clips to hold up the sun shades for my Tesla Model 3. I created this simple copy of the clips that came with the sunshades. I printed them both flat (with supports) and standing up. Both orientations seem to hold up well.…
I used Nuka Cola Clock by techoutreach for the cap shape but scaled it down and made the hollow in the back conical so its heavier. It'll still accommodate a clock mechanism 65x65x20 or smaller, but there's no hole in the back for…
Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon. This sunshade is an…
a replica of the Transformers CW sunstreaker gunsword for transformer toys. Best printed on an SLA/DLP 3D printer. Check out all of my transformers guns! Transformers CW sunstreaker gunsword - https://www.thingiverse.com/thing:3693685…
Better to print it in PAHT-CF (or ABS) for better resistance to summer heat! (not in PETG or PLA)
Remixed from RobSmo's https://www.printables.com/model/305355-dji-mavic-air-2-2s-mini-2-sunshade
Sonnenschutz für das HDS 12. Zerteilen am besten innerhalb des Slicers. Zum Verschrauben habe ich Reduzierhülsen gedruckt welche nach außen drücken. Bei Fragen gerne melden.
Tested on only a handful of optics so far - please let me know if it works for you and what scope/optic you have used it on! This model is designed to be 50mm diameter - simply measure the diameter of your objective lens, divide by 50,…
sunrise (sunset) birds - wall art, easy to print
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA+ Creality CR Black Transmission Distance: 0.5 PLA+ IIID Max Navy Blue Transmission Distance: 3.6 PLA+ JAYO Meta Red Transmission Distance:…
Print with support, Remove originak radio cover and replace.
I made this for my sister. We used to love the Mr Men and Little Miss books when we were young. Post-Printing Paint the white surface with a fine brush Glue a pin at the back to attach it to your shirt How I Designed This I downloaded the…
The Netatmo outdoor module is supposed to be placed in a shady place with sufficient air flow for accurate readings. Ideally, it is placed high above the ground and not too close to buildings. However, it's not always easy to find a spot…
Please print with ASA/ABS or any heat resistant filament. PETG is suffering during summer from heat inside car.
This is a filament painting of a female samurai at sunset. It was made by using Midjourney. Printed at 200x200 @ 2.80mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed…
I designed it to be foldable for easy use and storage. I used ABS for this print because it is flexible. And you need to find a 2mm steel rod, 5cm long, to use in the joints.
A sunshade for the original mavic mini. No supports are needed and it takes around an hour to print both parts. As this is mostly friction fit, I have included 2 versions of the bracket with different tolerances. You can also adjust the…
Sunshine pencil holder Great gift It slots together and holds 9 pencils Print the sun standing up as it is in the stl. I printed the sun with supports touching base-plate to make it extra secure as I was printing fast. @3DPrintBunny
Lake, mountains - wall art, easy to print
This little clip attaches a blanket or towel to a stroller to provide some shade. The three models have a slightly different gap for one of the slots, such that they fit various strollers. I printed it in PLA with a 0.6mm nozzle at a…
I love this model and had to share it, I did have to make some corrections to one of the plates that just wasnt long enough. I included my Bambu X1C build file and printed it using generic black and white and a silk gold. I found that…
I printed mine in a silk PLA print at 60% of the size I originally designed this for a much bigger tree. The reduced to 60% size fits perfectly on my 6ft tree. I hot glued the extender to the top part you can probably get it pressure fist…
Gun for Transformers Siege Sideswipe or Earthrise Sunstreaker. Has a 5mm peg so compatible with all modern 'bots. Modelled after the Masterpiece Sideswipe weapon and scaled down appropriately to fit Siege/Earthrise figures. Print Settings…
This is my 3rd fleet for the game A Billion Suns. Edit 2021-April: Just replaced the Frigate as it was incomplete. Edit 2022-April: Uploaded repaired versions of the files. There's one of each type of ship and they're compatible with the…
Summary This is a remix of another design. This will fit the Garmin Striker Plus 4CV. Could use some minor tweaking but does what its suppose to do. Print Settings Rafts: No Supports: No Resolution: .16 Infill:25 Filament brand: PLA or…
I had to make the line thicker to be able to print the details with a 0.4mm nozzle, afterwards I filled the lines with paint and removed additional paint with IPA.
Sunshade for Mybo Ten Zone scope. You only need a rubber band to hold it in place Pare-soleil pour scope Mybo Ten Zone . Vous avez seulement besoin d'un élastique pour le faire tenir en place Print Settings Printer Brand: Alfawise…
This is a filament painting of a Heron at Sunset. It was made by using Midjourney. Printed at 110x220 @ 2.64mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed Red…
The original model was very nice, but I decided to beef up all of the parts for a little extra strength which may or may not have been necessary. The following changes were made: 1) Beefed up the top and bottom rings, the pillars, and the…
To use the Fusion project, the Parametric Text plugin should be installed in advance. The gap dimension is then printed on the clip so that you can print several clips with different dimensions and try them out. The gapHeight parameter…
Threaded to fit the Arken EPL4 4-16; may fit others, unsure if Arken uses the same thread pattern on different optics. This requires a well tuned printer. I was able to get good quality threads on my Bambu P1S w/.4mm nozzle. Printed in…
This is a replacement bolt for a Nolan N70-2X helmet. The sun protection peak on top of the helmet uses a central M6 bolt made of plastic. The structure of helmet requiers for accessories to break off in case of a crash, therefore the…
This is a compact enclosure for a SmartHome SunSensor to control shaders via HomeAssistant using an ESP32-C3 WLAN Controller and BH1750 Sensor. The sensor is powered via USB C port. The enclosure printed on PrusaCore One in two parts…
Token Box that fits the official Gamegenic PREMIUM TOKENS PRO plus EXPANSION PACK and 18 additional 12mm dice. Uses six 6x5mm magnets to hold the lid. The diceplate goes on the bottom and the dice on top of it, pushing through the hole in…
Basically combined a sunshade clip and sun glass holder for those of us with sunshades and sunglasses in our MY's. I'm sure there are a zillion ways to refine this and further improve it but it seems to work. Any heat tolerant filament…
Sun shade designed for iPhone 12 (and others when scaled - see note below). It provides better visibility in direct sunlight. As seen on pictures I tried both PETG and TPU materials. I think that TPU is better as it fits the phone nicely,…
This is a replacement for the clip that holds the car sunshade. The fourth picture shows the original part (left) vs the 3d printed one (right). Although made specifically for a FIAT Grande Punto , it can be expected to fit other car…
CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…
The Charming Bloom Vase brings brightness and joy into any space with its radiant sunshine yellow tone. Its geometric diamond texture creates a playful yet elegant surface, reminiscent of blooming petals captured in a modern sculptural…
Extra clips in case you lose some or just want to secure it better. I found that having two more (six total) works well - two on the front edge and two on the back edge since those edges bow a little. Print instructions 3 perimeters no…
This is a filament painting of a beautiful island at sunset. It was made by using Midjourney. Printed at 119x200 @ 2.88mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black…
creditos ao original https://www.thingiverse.com/thing:2962608/comments
My 1st original HueForge model. It's a 4 color print using Esun filaments, however, you can use any filaments you choose as it's not a complex model. I have also included a base model you can mount the print to. It makes the process of…
June Lego Wreath! Another version of the Lego Wreath. This one is 24" in diameter with 8 pieces. Print one with the hook, so you can easily hang it. Check out my page to see the studs I designed for the other months.
Small file for sunshade holder in Fiat Panda. I recommend printing in PET-G due to temperatures in summer. It is compatible for sure with Fiat Panda I. let me know if it is compatible with other car models.
Renault grand scenic hook for rear sunshade Print Settings Printer: Custom Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 100 Notes: Support only to bed. Print as default downloaded orientation to maximize strenght. Category: Automotive
A detailed Star Wars Episode IV inspired bookmark, designed to be super thin. No page damage, no hassle, just a cool design. I'm a big fan of the shadows this one casts! Test printed using an FDM printer. As I'm going for very thin…
As requested by a Reddit user. Should fit the Ray-Ban Meta sunglasses. A prototype, work in progress!
Bogg bag type attachment to hold bug spray &/or sunscreen. Tight snap, but the spray bottles can also just slide in - it can be installed horizontal or vertical which ever is the best alignment for the holes. This uses a screw-type…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
First of all, big thanks to SunShine for the outstanding idea of printing multicolor / multimaterial filament yourself. Since the bed on my first printer was too small, I reduced the 200 mm filament spiral to 168 mm and 16 grams. It was a…
I use these clips on our stroller to protect our child from the sun. So far, I have printed numerous clips for friends as well. I am sharing the design here. Enjoy! Protect your little one from the sun with this innovative 3D printed…
A simple hook to replace a broken one of a Renault Laguna rear sunshade. Not an exact replica of the original , probably best to print in a material that is more resistant to heat like PETG or even ABS since it gets pretty hot inside cars…
Comb your hair with the comb from sunshinemakes. Many thanks to my followers and to everyone for the 1000 downloads:)
Image by Midjourney Hueforge 4 colors black red yellow whitematte a small 10x10cm file just to try Hueforge.
This is a filament painting of a beautiful sunset on an island. It was made by using Midjourney. Printed at 133x200 @ 2.8mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black…
Update: Added speedo sunshade! A fairly simple model to cover the dashboard and provide some protection from the sun, when my clear windscreen arrives. Fit is perfect slide on, won't come out but probably won't stay on either. STEP files…
Uploaded two versions - 1.0mm and 1.2mm. The site renamed the stl files to 10mm & 12mm which is not correct. Print instructions I'd suggest to use PETG, PLA is not UV resistant and will be "baked" very quickly.
A great Wall Art of a sunset on the sea. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Created my own attachment arm to attach the Netatmo Sunshield to my brick wall.
The original model by mishkin2 in this link has been slightly modified to compensate for a few weak points. Printed for gifting (as a wall decoration). 3D Printer: Elegoo Neptune 3 Pro Filament: Porima PETG Black Nozzle: 0.4mm Slicer:…
Introduction: This is a mechanical sculpture meant to illustrate the mechanisms involved in getting two things to spin in opposite directions. It's pretty to look at, and educational! Assembly: Things you'll need: Super Glue/Plastic glue…
I had trouble making the sunshield from the descriptions in the other models. I created this as a template that can be glued in place using either Elmer's Glue or CA Glue. The spars can then be cut off with a pair of wire cutters and you…
Nothing special as far as printing goes but I did add supports under the recessed areas (nearest to the print plate only).
Keep your towel in place and enjoy the sun without interruptions! With the SunStay Beach Towel Holder, you can ensure your towel stays firm and flat on the sand, even on windy days. Designed with sturdy and easy-to-use anchors, this towel…
I made this hood for Hikvision camera DS-2CD2T47G1-L with 6mm and 2.8mm focal lengths to prevent sunlight to burn into the picture when sun is rising, with camera looking to East. No supports needed. Use some UV-resistant material…
