50 models
I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
This is a simple door shelf divider for a Whirlpool WRT318FZDM fridge. It has a clip-on design and comes in two sizes (112x35mm and 112x50mm). Printing instructions Choose the size you'd like Print as-oriented in the .stl file (writing…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Liked the original and modified it a little
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…
I needed a sensor mount for my Enclosure Ambient Control project. I had a few requirements : It needed to sit close to the controller PCB so wiring is easy. It needed to have good air circulation It needed to be ridged enough for…
Originally uploaded on Thingiverse before Printables was a thing. I have a T310 that needed to have a couple of drives added so I did my best to make a quick drive caddy so I could make that happen with some SATA drives I had laying…
This is simple case for Sensirion SHT31 temperature/humidity sensor. It can stand on desk or can be hanged on the wall. SHT31 has one button to select between humidity and dew point. I think it's useless for everyday use so I hide it.…
This is a replacement part for the clamp on the sliding miter t able for the Ryobi BT 3100 table saw. I bough one second hand and the miter clamp had the tabs that hold the aluminum extrusion fail. The replacement part has the tabs run…
ORGANIZZATORE GT310 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Just like the original Hakko B2756 but you can print as many as you need now. I printed with 5 walls, 0.2mm height and 80-100% infill to add some weight to it. I debated adding a lead weight to it but with the tips in it it has enough…
This thing allows one to mount their 690 Porter Cable Router to a Ryobi BT3100 (Sears Version). I made it solid in PET-G to accommodate the 5kgs weight of the router, and it needs to be safe. There are 4 x 1/4-20 nuts embedded in the…
New V3.1 Cradle Design for improved integration of Allsky Electronics, and fixation to main cone assembly. Includes additional fixation points for Driver boards and sensors for Allsky assemblies with additional features. See suggested…
First Part for a Samsung Galaxy Tab 3 10.0 wall mount with push unlock- Not Tested Tab 3 10.0 v7 + Tab 3 10.0 Wall Mount V3 or Wall mount v5 or Wall mount v6.stl Tab 3 10.0 v14 + Tab 3 10.0 Cover V4 (+ 2x nuts cover v1) + Wall mount v5 or…
Wanted a nice little holder for the et310 circuit tracer with space for the accessories. The whole model is 195x190 so it should fit on most mid sized build plates!
I wanted to mount my Tapo T310 sensors to the wall in a nice way. I mounted one of them to one of the posts of my patio roof and I wanted the heat of the post not no influence the measuring too much. For that reason I also added a…
SALUS RT310TX Room Thermostat Support Print time : 1 h 30 m Material : ±30 grams Made with Tinkercad
I wanted a tig torch holder for my awesome Grizzly welding table. I used to use a magnet torch holder but it used to fall often and break cups so I made this. It's not pretty, but holds my torch perfectly. I added three magnet holes in…
Needed a holder for a Tapo T310 Smart Temperature & Humidity Monitor , that would clip onto 16mm tubing. Allowed an opening at the base of the holder so the sensors wouldn't be covered if inserted upside down. Additional credit to fl0cke…
CASETTE PER PRESEPE GT 31 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
Description Made for home theater systems and 2.1 channel desktop systems. a dedicated subwoofer is highly recommended (coming soon?). Crossover at around 200hz for subwoofer. More detail coming soon… Have questions? Please post a comment…
I built a custom enclosure for my 3D printer and wanted to monitor temperature and humidity at multiple positions inside the enclosure to better understand and optimize printing conditions for different filament types such as PLA, PETG…
ORGANIZZATORE GT313 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ORGANIZZATORE GT31 Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
ORGANIZZATORE GT311 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ARTE&DISIGN GT31 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
Using the temperature sensor inside the box can give misleading results. That's why I used the SHT31 Outdoor Temperature & Humidity Sensor. https://www.dfrobot.com/product-2160.html I created a small add-on to use the sensor outside the…
Sencillo soporte muy útil a la hora de recortar el vello no deseado.
Print details: Material: Polymaker PolyLitePETG-teal layer height: 0.20mm Supports: No Infill: 15% [English] I made a holder to prevent the Apple Watch from being remove from magnetic charging dock CHOETECH T313. Prepare a hair band for…
Creative Inspire T3100 subwoofer under desk mount. This is a under desk mount that I've made for my old Creative Inspire T3100 subwoofer, as I'm making a mobile computer desk, that I can move around the house. You will also need: 8 x M4…
MODELLINO DI ABITAZIONE GT31 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
I got tired of my welding helmet falling off my welding table / cart so I modeled this up. It uses the existing 5/8" fixture holes to mount and holds a variety of helmets. Confirmed to fit Miller, Lincoln Electric, and Yeswelder helmet…
ORGANIZZATORE GT312 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ORGANIZZATORE GT314 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ORGANIZZATORE GT319 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ORGANIZZATORE GT316 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ORGANIZZATORE GT318 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
ORGANIZZATORE GT315 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
ORGANIZZATORE GT317 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
PARTI MECCANICHE FUSION_GT31 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
I wanted a handy way to store my tungsten when it accidentally gets dipped into the welding pool and thought a tray that mounts to my welding table would perfect. I've been running this design for a few weeks now and it works awesome!…
Needs 5 pieces of 3x5mm or 3x6mm or 3x7mm Cylinder Neodymium Magnets.
Tapo T310 wall holder without screw hole
I had a container of TIG rods fall off my welding table while I was welding and managed to weld my tungsten to my stainless weld project out of shock- we can't have that.. So this idea was born; it's a two piece part with both part…
Tapo T315 wall-mount holder without screw hole
These should work with most vintage Emachines towers of the DDR memory era. The ones with the black or grey case and rounded silver front. Honestly you could also use them with any other computer case as well though. You might want to…
A MultiBoard holder for a Klein ET310 probe. It will require supports to print properly.
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
![Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]](https://media.printables.com/media/prints/455919/images/3780277_097a7147-9ad7-4712-9ca0-bcdb72af705a/img_20230423_122418783.jpg)
