P
Printableszeusmm
HIKVISION DS-2CD2T43G0-I5
HIKVISION DS-2CD2T43G0-I5
Print approx. €9.87–€12.06 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 31
- Likes
- 2
- Rating
- 0
Search results: t43
Counting matching models…
P
PrintablesKen226
BTT Pi TFT43 V2.0 Voron 2.4 touch screen case
Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…
- Downloads
- 1,411
- Likes
- 200
- Rating
- 4.82
P
PrintablesFizzy
Voron Switchwire/2.4 BTT Pi TFT43 screen mount
This is a screen mount for the BigTreeTech Pi TFT43 touch screen to be mounted on the Voron Switchwire or the Ender 3 conversions. This screen is powered directly from the Raspberry Pi ribbon cable and best of all its plug and play - no…
- Downloads
- 414
- Likes
- 72
- Rating
- 5
P
PrintablesJHenley01
Voron 2.4/Trident 45 Degree Mount for PI TFT43 4.3" Display
I couldn't find a mount that fit the PI TFT43 4.3" screen so I remixed the design linked below to fit and designed a bezel. Print with normal Voron part settings, no supports needed.…
- Downloads
- 313
- Likes
- 14
- Rating
- 5
P
Printablesmstejska
Power button replacement for T430
Just replacement of broken power button.
- Downloads
- 273
- Likes
- 3
- Rating
- 5
P
PrintablesKen226
BTT Pi TFT43 V2.0 Touch Screen Mount for Voron Switchwire
I designed this to so that the BTT TFT43 V2.0 could be mounted to a Switchwire. This drops about 15mm lower than the bottom of the skirts, so you will need some clearance. The housing mounts to the skirts, in the same manner as the…
- Downloads
- 236
- Likes
- 41
- Rating
- 5
P
PrintablesStraws
T430 IO/HDD Cover
I made this model because I had a Lenovo T430 that was missing the IO cover. It was missing the screw for it too, so I designed this model to not require a screw when mounting. (This is only for the mk1, mk2 requires a screw) It clips…
- Downloads
- 189
- Likes
- 7
- Rating
- 5
P
PrintablesFunFunBoy
PITFT43 Screen Mount for Voron 2.4 / Trident
A mount for BIGTREETECH PITFT43 (4.3" touch screen). BOM 4 pcs of PITFT43 mounting screw (come with PITFT43) 5 pcs of M3*8 mm 5 pcs of M3*20 mm 5 pcs of M3*D5.0xL4.0 heat set insert (standard voron heat set insert) 1 pcs of M3 t-nut
- Downloads
- 166
- Likes
- 32
- Rating
- 5
P
Printablesjeronbernal
BTT PITFT43 Voron 0.2/0.1 trident skirts front screen mount
remix of 2 different mounts to make a more solid mount for the v0.2, added a little flair to the side of the frame aswell Tilted the screen so it wasn't flat like a pancake, and took up less Y axis real estate on your table/desk, and…
- Downloads
- 152
- Likes
- 27
- Rating
- 4
P
PrintablesDaHouzKat
Original Prusa Enclosure BTT PI TFT43 DIP Case
Compatibility BTT PI TFT43 DIP Raspberry Pi 4 Print Instructions Use Default Prusa Slicer 0.20mm Quality Print Settings Nozzle Diameter : 0.40mm Filament : PLA or PETG Infill : Gyroid 25% Perimeters : 3 Supports Support on build plate…
- Downloads
- 147
- Likes
- 42
- Rating
- 0
P
PrintablesPaul Creations
CR10-V3 Standalone SKR2 +TFT43 version AND RRF3.3
This is a REMIX of 2 other great mods that are out there for the CR-10 and for the TFT43. It felt pointless to recreate them from scratch when they are such great designs and they worked well for this mod. So i want to thank the original…
- Downloads
- 135
- Likes
- 27
- Rating
- 0
P
PrintablesNinefifty
BTT Pi TFT43 V2.0 Voron 2.4 touch screen case - clicky-clack mod
After trying to convince myself that "not being able to see the entire screen after the clicky-clack mod wasn't too bad" didn't work, i made a remix of Ken226's BTT screen mount. Noticed my door was scraping the top of the case, so i…
- Downloads
- 126
- Likes
- 26
- Rating
- 5
P
Printablesqbis
Voron V0.2 BTT PI TFT43 Mount
Use this mount wiht Switchwire screen enclosure. https://www.printables.com/model/405160-voron-switchwire-btt-pi-tft43-screen-mount Printed with standard Voron settings and supports on build plate only. The models are in correct…
- Downloads
- 120
- Likes
- 14
- Rating
- 0
P
Printablesrchamp
BTT Pi TFT43 thick mount for clicky clack door
UPDATE: 2024-July-19. I posted an updated V3 step and stl. needed to provide a little more clearance as my hinge started sagging and needed to clear the screen cover wanted a mount that extends the screen out 20mm more to give clearance…
- Downloads
- 119
- Likes
- 16
- Rating
- 0
P
PrintablesICT3D
Voron 0.2 BTT TFT43 Screen Mount
In the slicer you will need to clone and mirror the mount. For the screen enclosure I used https://www.printables.com/model/405160-voron-switchwire-btt-pi-tft43-screen-mount
- Downloads
- 115
- Likes
- 20
- Rating
- 4
P
PrintablesGiorgio
Thinkpad T430 USB-C mod
I couldn't find a mount for the usb-c mod for my T430, I tried one for the X230 ( https://www.thingiverse.com/thing:3732642 , the plug is from that model, I already printed it, so...) but it doesn't fit correctly on the T430, so I modeled…
- Downloads
- 112
- Likes
- 15
- Rating
- 0
P
PrintablesSteve Hanov
Lenovo T430s Hard Drive Caddy Door Cover
Print as oriented . This minimizes support contact Use 8mm brim. Otherwise it will fall over. Turn on Organic or Tree Supports Use 0.08mm layer height for best results and a nicer looking part. CAD Model:…
- Downloads
- 109
- Likes
- 5
- Rating
- 0
P
PrintablesPaniCC
BTT TFT43 V2.0 screen case with sacrificial layer
Instructions: You can print this at regular height of 0.2 except the overhang part. To get it to work, print with variable layer height of 0.15 at the overhang for this future to appear (or just print at 0.15 layer height). You might need…
- Downloads
- 90
- Likes
- 9
- Rating
- 0
P
Printablesmaramao
Ender 3 S1 PiTFT43 side mount
Put together a mount for a pitft I had laying around with the help of couple of other amazing makers, thanks to danielvolz and mintonette Additionally to my files you MUST print: this printer mount…
- Downloads
- 87
- Likes
- 38
- Rating
- 0
P
PrintablesBruce Tuller
Voron BTT TFT43 screen mount extended for ClickyClack door
Modified version of the LDO BTT TFT43 screen mount for Voron V2/Trident to ClickyClack door mod.
- Downloads
- 75
- Likes
- 13
- Rating
- 0
P
PrintablesOne7Seven
Bigtreetech BTT TFT43 display mount for the VORON V0.2r1
Remixed original model to make it suitable for Bigtreetech TFT43 display which has very similar dimensions but different mounting holes positions. Follow original model for assembly instructions and hardware. 4x M3 threaded inserts 2x M2…
- Downloads
- 73
- Likes
- 10
- Rating
- 5
P
PrintablesStraws
T430 DVD Bay cover
A lightweight DVD bay cover for the T430 for anyone that wants to make their T430 lighter. Unlike the official DVD bay cover, it only clips onto the front of the bay, so it doesn't require any screws to mount. This model is designed to be…
- Downloads
- 68
- Likes
- 3
- Rating
- 0
P
PrintablesSinole
Prusa Bear TFT43 Screen
This cover works with bear frame and it accommodates Bigtreetech TFT 43. To make this more sturdy I designed for threaded heat inserts in the cover. for screen this size It didn't feel good to screw into the plastic. I can change it if…
- Downloads
- 67
- Likes
- 17
- Rating
- 0
P
PrintablesStraws
T430 bottom RAM bay cover
A replacement bottom cover for the T430 but without mounting screws. I kept the airflow hole pattern from the original, but the original also had some tape bent over them perhaps to stop water ingestion? So you might want to put them on…
- Downloads
- 66
- Likes
- 3
- Rating
- 5
P
PrintablesGutterGames_CA
BIGTREETECH PI TFT43 DIP Mount
After looking around for a few weeks for a mount for this display, I finally decided to make one myself. All you need is: 2 x M3 heat inserts 2 x M3x6mm screws 4 x M2.5x4mm screws (included with screen) 2 x M4x12mm screws with T-Nuts…
- Downloads
- 65
- Likes
- 8
- Rating
- 0
P
Printablesgyscos
BTT-pi TFT43 mount for clicky-clack door + doorbuffer
The LDO voron kit comes with a BTT-pi TFT43 touchscreen and a mount for it. With a 2cm-thick clicky-clack door, the screen needs a deeper mount - this is the stock “thick” mount (and the model by rchamp uses the same depth, but adds a…
- Downloads
- 63
- Likes
- 4
- Rating
- 5
P
PrintablesTeeJ
Raspberry Pi case with TFT43 and 2020 mount
I needed a BIGTREETECH TFT43 mount for a TronXY X5SA Pro 3D printer. I like how the Pi case goes together without any hardware on the original and modded it to include a 2020 extrusion mount (should work in any size extrusion). The TFT43…
- Downloads
- 60
- Likes
- 7
- Rating
- 0
P
PrintablesDavidGray
BTT TFT43 Mount for Micron 180
To be used in conjunction with https://www.printables.com/model/776889 Note DSI Displays are not currently supported by BTT CB1. A Raspberry Pi is required.
- Downloads
- 57
- Likes
- 17
- Rating
- 0
P
PrintablesGiovanni1954
CASETTE PER PRESEPE GT43
CASETTE PER PRESEPE GT43 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
- Downloads
- 55
- Likes
- 5
- Rating
- 0
P
Printablesjbtraul
Micron (1515) BTT Pi TFT43 mount
A mount for BTT PiTFT43 v2.1 on Micron. Will likely work for other 1515 machines. Display mounts to displaymount with 2.5mmx12mm screws. Displaycover slips over display and snaps into place. Slot in cover provides clearance for cable.…
- Downloads
- 55
- Likes
- 7
- Rating
- 0
P
PrintablesJoshua Whitley
BigTreeTech Pi TFT43 v2 Housing for Creality
This is a model for a housing that fits the BigTreeTech Pi TFT43 v2 and mounts it to the aluminum extrusion found on Creality CR-series (and probably Ender series) 3D printers. Tested specifically on my Creality CR-10 Smart. Because of…
- Downloads
- 54
- Likes
- 5
- Rating
- 0
P
PrintablesRuneLS
BTT PI TFT43 mount for CR-10S Pro
Bracket to mount the BigTreeTech PI TFT43 to the original screen mounts for a CR-10 S Pro.
- Downloads
- 52
- Likes
- 7
- Rating
- 0
P
PrintablesDavidGray
Micron 180 Skirt For BTT TFT43
to be used in conjunction with https://www.printables.com/model/773017
- Downloads
- 47
- Likes
- 9
- Rating
- 0
P
PrintablesMatthias
BTT Pi TFT43 mount for Salad Fork
Display frame + holder for the front skirt of Salad Fork v1.1 for the BTT PiT FT43 V2.0 display Replaces the Display_Skirt_x1.stl from the original. The Front_skirt_right and Front_skirt_right from the original can be used as-is, so this…
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
PrintablesKobeKeshet
BTT TFT43 Holder for Ender 3V2
No support. Brim is necessary. Nozzle 0.6mm is recommended.
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
Printablesrepairwins
Lenovo ThinkPad T420 T430 T520 T530 W520 W530 DVD Drive Tray
I sold the DVD drive in my laptop to fund my electronics modding habit. Instead of having an unsightly gap, I modeled this part which allows me to store an HDMI adapter and a USB-C to barrel jack adapter. It clicks in without you having…
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesMinty Jo
BTT TFT43 v2 mount Ender 3
Hi Peeps, This is my design for a mount for my Ender 3 that holds my RPI 3b+ and a BTT TFT43 v2 display on it. Any RPI should fit as it is placed in the rear im not sure about the display though. The most recent iteration is v4 because of…
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
PrintablesGiovanni1954
ORGANIZZATORE GT43
ORGANIZZATORE GT43 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
- Downloads
- 34
- Likes
- 10
- Rating
- 0
P
Printablesscratchedpaintjob
T430 powerbutton replacement
This is a replacement power button for a Lenovo Thinkpad T430 Printing it with a clear filament gives a really nice effect!
- Downloads
- 31
- Likes
- 0
- Rating
- 0
P
Printablestommorox234
Voron switchwire tft43 screen mount
this is designed for an ender conversion but should fit a normal switchwire too It’s a bit fiddly to put together. First you want to put the y idler part on because its screw is covered by the screen. Then the screws for the screen can be…
- Downloads
- 29
- Likes
- 7
- Rating
- 0
P
PrintablesJB3Designs
Bigtreetech TFT43 V3.0 Remix - Top Mount
This is a remix of Bigtreetech TFT43 V3.0 by BigFunkyMan as found on Thingiverse https://www.thingiverse.com/thing:4534012. This remix allows the case to be top mounted. To assemble screw and glue the mount adapter onto the case back. Use…
- Downloads
- 28
- Likes
- 2
- Rating
- 0
P
PrintablesJB3Designs
Bigtreetech TFT43 V3.0 Remix - Front Mount
This is a slight remix of Bigtreetech TFT43 V3.0 by BigFunkyMan. I wanted to install this case in the same way I had my other LCD, so I remixed a mounting adapter from ADIMLab Center Mount LCD Case for Newer Machines by Electroskippy. The…
- Downloads
- 27
- Likes
- 0
- Rating
- 5
P
PrintablesFred Henning
BTT Pi TFT43 V2.0 Touch Screen Mount for Enderwire
Its the same as Ken226's model only difference is it can fit the Y-Idler part of Enderwire using a press fit m3 nut and a short m3 screw. I wanted to use his model and this helped me thought maybe I would upload in case anyone else needed…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesKurtineczDesigns
BTT Pi TFT43 V2.1 Minion Frame
Remixed to better fit V2.1 with the two buttons on the top of the display and added a channel for the side ribbon cable.
- Downloads
- 26
- Likes
- 6
- Rating
- 0
P
PrintablesArkelic
Voron Flat Mesh Skirt BTT PiTFT43 2.1 Display Mount
To be used with the Flat Mesh Skirts for Voron 2.4 ( https://www.printables.com/model/608754-flat-mesh-skirt-voron-24-350300250mm ). I remixed the original to be able to mount a BTT PiTFT43 2.1. Similarly to the original, the cable can be…
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
Printableswagnerjack228
Igus Cable Carrier Mounting Bracket 4556T430
Igus Cable Carrier Mounting Bracket 4556T430 If this helped you out, tips are welcome on PayPal or Venmo If you decide to print or remix your own, I'd love to see a picture of how it turned out.
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
PrintablesAndré
Dell Server Tower T330 T340 T420 T430 T440 T620 T630 T640 Foot mount
You may need to snip off two of the 2mm pins on top, depending on the mounting direction. This is the most likely part to break when moving the server.
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
Printablescollindietrich
Yealink T43U Vertical Stand
I designed this to free up some desk space. It behaves like a wall mount, but remains on the desk - useful for when wall mounting is not feasible, such as on an adjustable height desk. Designed for the T43U, but should fit most phones…
- Downloads
- 21
- Likes
- 0
- Rating
- 0
P
PrintablesHunterius
TFT43 box for 2040 extrusion
WHAT Box for BigTreeTech TFT43 display mounted on 2040 extrusion. ( in my case used on RatRig VCore Pro printer) More questions? Don't want to miss any announcements? Do you seek support? https://www.facebook.com/groups/679001895990790…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
Printableschlpdf
BTT PI tft43 screnn mount for 2020 front extrusion
you will need 65mm space from the top of the extrusion
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesGiovanni1954
ARTE&DISIGN GT43
ARTE&DISIGN GT43 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
- Downloads
- 19
- Likes
- 8
- Rating
- 0
P
PrintablesGiovanni1954
ORGANIZZATORE GT437
ORGANIZZATORE GT437 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
- Downloads
- 18
- Likes
- 5
- Rating
- 0
P
PrintablesHunterius
Just another TFT43 display box
No, I am not addicted to display boxes, I just needed another enclosure that will fit my VCore3 printer. using M3 heated inserts More brackets are comming.
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesGiovanni1954
MODELLINO DI ABITAZIONE GT43
MODELLINO DI ABITAZIONE GT43 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
- Downloads
- 16
- Likes
- 7
- Rating
- 0
P
Printableshttps://www.thingiverse.com/sebipanther
Lenovo T430 with Dock wall mount
Lenovo T430 with Dock wall mount and easy way to fix other components onto it with zipties. I printed it in PLA and took less then 250grams. I use that thing as a media center on a projector. I only need a accessible Power Button that is…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesPrint_Fandango
Wall hanger for VERILUX Happy light Mod# VT43C83
I did not like the light on the stand, it felt like if it was just shooting light in an unnatural way into my eyes. The happy light is designed to simulate daylight and give you energy, and you do need it to hit you on the eyes, however,…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesGiovanni1954
ORGANIZZATORE GT430
ORGANIZZATORE GT430 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesSki3d
Creality K1 tft43 mount
Just a mount for a btt tft43 screen. Will need heat nut inserts for the main base
- Downloads
- 14
- Likes
- 6
- Rating
- 5
P
PrintablesGiovanni1954
PARTI MECCANICHE FUSION_GT43
PARTI MECCANICHE FUSION_GT43 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesMr.Shaky
BTT Pi TFT43 v2.1 frame
The default display location on a Voron v2 protects the top edge of the display; relocation exposes vulnerable components, and this modified frame covers them. The loose fit is intentional, both here and in the original…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesGiovanni1954
ORGANIZZATORE GT432
ORGANIZZATORE GT432 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
- Downloads
- 12
- Likes
- 5
- Rating
- 0
P
PrintablesEddieSha
PiTFT43 2020 Mount
A simple mount for mounting a PiTFT43 to a printer with 2020 extrusions. I originally made this for my TinyT. Thank you for interest in my model!
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesmateossh
ThinkPad T430s speakers cover
Old speaker covers were uncleanable. I decided to rip them off and print replacement. I used PETG to print and glued it with double-sided tape
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesPewpy
PiTFT43 Display Mount for Ender 6
PiTFT43 Display Mount for Ender 6 use existing screws
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesThor Sten
K1 (MAX) BTT TFT43 mount
Mounting BTTs TFT43 at original place, no support, no heat inserts. Just attach the holder on original point and place the frame over the TFT.
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesKevin Micallef
BTT Pi TFT43 V2.1 Switchwire Mount
Voron Switchwire mount for BTT PI TFT43 V2.1
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesMr.Shaky
BTT Pi TFT43 v2.1 top hat mount
The LDO v2.4 rev C kit shipped with a BTT 4.3" TFT RasPi display, and the default mounting position is in the front-center of the bottom skirt. As part of the associated top hat mod, this part allows relocation to a top corner; the…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesXERO PRINT
BTT Pi TFT43 V2.0 Voron 2.4 touch screen case ( LED NEOPIXEL REMAKE)
Hi, A while ago i printed the original schreen case from Kenn226. and used it for a long time .But now i had the idea it would be nice looking if there where some accent lights in the case . So i decidet to do a remake . And i hope you al…
- Downloads
- 5
- Likes
- 6
- Rating
- 0
P
PrintablesAdam Storm
V0.2r1 BTT TFT43 Colony Clacker / Mini Fridge Door Mount
Driftrotor's mellow screen mount is a thing of beauty, but the mellow 3.5" screen was nothing but problematic for me. The BTT TFT43 works great on my Trident, and fits decent enough on the v0, there just wasn't a mount for it. I took…
- Downloads
- 5
- Likes
- 5
- Rating
- 0
P
PrintablesMrTdesign
BTT Pi TFT43 V2.0 Voron 2.4 touch screen case clicky clack lowered and less filament
I remixed the Thicc Clicky Clack front skirt for 350mm to provide additional door clearance, and I’ve also modified this screen mount to ensure proper fitment while preserving the original design language. You’re welcome to check out my…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesJohn Harvey
RatRig V-Minion Big Tree Tech TFT43 Screen mount
Wanted a compact screen mount for the BTT TFT43 that didnt really increase the footprint of the RatRig V-Minion. I just run the ribbon cable underneath and into the electronics compartment. BOM: 2x6mm T nuts 2x M6x12 SHCS from the RatRig…
- Downloads
- 1
- Likes
- 1
- Rating
- 0
P
Printables
ThinkPad T430s speakers cover
Old speaker covers were uncleanable. I decided to rip them off and print replacement. I used PETG to print and glued it with double-sided tape
P
Printables
Igus Cable Carrier Mounting Bracket 4556T430
Igus Cable Carrier Mounting Bracket 4556T430 If this helped you out, tips are welcome on PayPal or Venmo If you decide to print or remix your own, I'd love to see a picture of how it turned out.
P
Printables
BTT Pi TFT43 thick mount for clicky clack door
UPDATE: 2024-July-19. I posted an updated V3 step and stl. needed to provide a little more clearance as my hinge started sagging and needed to clear the screen cover wanted a mount that extends the screen out 20mm more to give clearance…
P
Printables
Voron BTT TFT43 screen mount extended for ClickyClack door
Modified version of the LDO BTT TFT43 screen mount for Voron V2/Trident to ClickyClack door mod.
P
Printables
Toyota Corona RT43 RT40 Light Knob Switch
Replacement Toyota Corona RT43 RT40 Light Knob Switch
P
Printables
Voron V0.2 (R1) One Piece Front Skirt with mount for BTT Pi TFT43
I bought a Bigtreetech Pi TFT43 V2 touchscreen for my V0.2 to standardise between my different Vorons. I ran my V0.2 headless before and I really liked the one piece design so I remixed this one to add a mount for the screen. It can use…
P
Printables
Mount TFT43 Screen to Top of Ender 3 V3 SE
Print standing up with supports for maximum strength
P
Printables
ORGANIZZATORE GT431
ORGANIZZATORE GT431 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
ORGANIZZATORE GT433
ORGANIZZATORE GT433 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
ORGANIZZATORE GT434
ORGANIZZATORE GT434 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
ORGANIZZATORE GT435
ORGANIZZATORE GT435 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
ORGANIZZATORE GT436
ORGANIZZATORE GT436 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
ORGANIZZATORE GT438
ORGANIZZATORE GT438 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
ORGANIZZATORE GT439
ORGANIZZATORE GT439 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
BTT Pi TFT43 Voron 2.4 / Trident touchscreen case
Original screws that came with the screen are not long enough. You have to buy M2.5 x 8mm screws. Screen angle is 30 degrees.
P
Printables
Voron 0.2 front skirt with BTT TFT43 screen mount
First of all, I made this last year and I honestly can't find where I got the original pieces for this - one model was for the case and bezel snap on faceplate, and the other model is of course the Voron supplied front skirt panels, which…
P
Printables
Front Tall Skirt for BTT PI TFT43 Screen Mount
Front Tall Skirt to use with BTT PI TFT43 Mount