Counting matching models…
After having been requested to converted the previous model from a pepakura file! More and more people suggested it wasnt quite the correct shape. So after many hours of play and manipulation, I think we finally have somehing worthy of…
Ripped straight from the fallout 4 game files. 82k triangles 247k vertices
Hardware: 4x M3x8mm either sockethead or countersunk screw work. 2x Red spade connectors small length of wire or cable 2part epoxy or other glue XT-60 Connector (the one I used:…
If you like, throw a hungry student a Tip so i can make more cool stuff! :) https://paypal.me/jpal85 40x14mm, 3mm thick base. Uses M3 hardware. Prints fine without supports at 0.2mm. Takes about 24 minutes at 65mm/s. Some off brand XT60's…
THIS PROJECT IS ON PAUSE I just don't have the time anymore right now. I regularly get messages from some of you for the source files. So I released them in the zip-archive called "source" as .ipt (Autodesk Investor) and .stp. Right now I…
XT60 is often used as general purpose connector for low power devices and sometimes needed to connect XT60 to regular PVC 2pin 1.5 mm^2 cable. This adapter allows esthetically connect XT60 on the same way as it done in regular AC socket…
Parts are print oriented with no support. Only OBI Cap 2colors is not print oriented. It need 1pc M3x16mm and original connector 643852-2 (3,5 euro from Makita). Fusion360 file can be use to modify the model or import in other projects.…
A set of covers for a straight-through XT60 connection (mainly so I can avoid shrink tubing). Has 2 separate 4mm diameter wire holes. The fit is a bit loose but suits my requirements. I printed on a raft - without one, you may need to cut…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Here you will find my designs for the XT30 size and MR30-M . News: 12.03.2025 STEP files available XT60 Male vertikal/ horizontal mount simple and slim design suitable for a wide range of applications To additionally secure the plug in…
Holder for an XT60 plug or socket with latching function to release the plug or socket without tools. Designed and drawn in FreeCAD , file for FreeCAD and CHITUBOX available. I printed mine with an Elegoo Saturn, directly on the platform,…
The XT60 connectors are glued into the printed parts. I used a 2-component epoxy adhesive. Uses M3 countersunk head screws.
EZ to Grip XT60 and XT30 Caps to cap, cover, and tag your batteries especially when you travel. Printed in PLA UPDATE: 2 Versions - TPU VERSION - adjusted for a snug fit! Resolution: 2 Walls/Perimeters - 3 or 4 top/bottom - .28 Layer Height
Another awesome file found over at http://www.pepakuravault.com As with all pep file conversions there are mesh errors holes that need filling / fixing If you do take the time to fix up the files please re-upload them as a remix so we can…
XT60 Charged/discharged battery indicator protector caps I print 3 colours and use the blue for battery packs at storage charge. I've printed in TPU but there are a few flexible PLA's available that work well with this model. Print…
I designed this plug cover to use an old 20V HP 140W laptop power supply for my tiny e-lab and for my testbench. No shrinking tube needed. Superglue required to glue the plug into the housing. Printing Instructions Prusament PETG Urbay…
The original cover has some riser to keep cover of from the display window & buttons. Added those. This one also has Raymarine logo. When printing a single color printer: Slice logo.stl to .gcode Place the body just on the top of logo to…
I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…
Good working sleeves for XT-60 connectors. Larger holes so it works with 4mmq wires and inside more room so it will snap on. Snap on but better to use a little drop of CA My favourite material is TPU but PLA works fine.
My old boat has a mix of Raymarine ST60 and ST60+ instruments. It's fairly simple to find printable models of the sun cover for the ST60 model, but I haven't found any good ST60+ cover, so I decided to design it. The differences with the…
This is an XT30 / XT60 / XT90 Cap, it fits over the female side (battery side) of lipo batteries. It has a small lip on the bottom to make it easier to pull apart. Should fit snug. I use these to determine if the battery is charged or…
Print in TPU Hit the ❤ if you found it useful
XT60/XT90 connectors are often used from model builders to connect LiPo batteries to the receiver system, electric engines or the control units and starter motors of jet-engines. With this tool the wires are aligned with the connectors…
Držák konektoru XT60, montáž do panelu. Konektor je vlepen. Pro lepší tisk doporučuji podpěry ale půjde to i bez nich.
I used support for the helmet and chest armor
This is a range of panels for presenting XT60E-F sockets. I designed them to present XT60 12V power sockets in a campervan. But I imagine they could be useful for any number of situations where presenting XT60 power sockets would be…
Two piece adaptor that clips to the top of a Dewalt battery and provides an XT60F connection out. I used some 0.5mm copper sheet for this to create the contacts, but you could flatten a thick copper wire or use tin to do the job. Cut and…
A lock to prevent unvoluntary unplug of your XT60 connector 2 variants available for XT60H-M and XT60-M Amass connectors
This is a remix from the Functional Print Friday's Youtube channel of a cordless battery adapter for a Pinecil soldering iron. Mostly, It includes an XT60 connector built into the part to make it a little more universal, making it a…
Thanks to @NightHawk for this great design
These are my take on some XT60 connectors. They are made to fit 3.5mm (4mm OD) connectors. They should be press fit, I had to use a small vice to press mine in place. On the male connector, I added a bit of super glue after to hold them…
it is the T60 power amour helmet as seen in the game fallout four. it is extracted directly from the game files. supports are needed, and the center is hollow so it can be turned into a wearable helmet
Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support
This model is inspired by this entry , but modified to fit the 5-Inch version of the TBS Source One frame. It is also a bit easier to print, because I reduced the angle of overhangs. There are different versions of this mount for the…
Please leave a ♥ Like if this print was helpful to you :-) This XT60 Distribution Box (or Power Strip) allows you to convert a single power source with XT60 connector into 5 x XT60 outputs. I designed it so the top snaps into the bottom…
Adapter from Bosch Professional 12V Akku to XT60
XT60BE-F When designing my electronic devices, I often use screw terminals or XT60 connectors. As they allow for high current, however, I now prefer to use XT60 terminals as they prevent the user from being able to plug the cable in the…
A simple XT60 cover. Prints fast with the help of vase mode Fits snuggly Has a bottom edge for easy removal Mostly waterproof (not guaranteed) Gcode for Prusa MK3S+ 0.4mm nozzle (bigger nozzle will require modification of the model) If…
I've printed this in PLA, but TPU might be nicer. In PLA it's quite sensitive to clearance, so you can adjust that as a parameter in the Fusion360 file. The current clearance works for me on my Bambulab X1C printer, with a layer height of…
XT60 to 1.5mm² cable case, housing, cover XT60 is often used as general purpose connector for low power devices and sometimes needed to connect XT60 to regular PVC 2pin 1.5 mm^2 cable. This adapter allows esthetically connect XT60 on the…
The Losi Rock Rey is a fun RC car, but it comes with lame EC3 battery connectors. You can trim the original part to fit XT60, but then it sticks out too far, and you might need to get longer screws if you use the nicer XT60H with the…
Geprc / Phisital mark5 XT60 mount. Holes diameters 3.1 mm, holes spacing 24.5 mm. You can use glue to stick the connector. Printed in PLA.
Print with supports on build-plate only. I found a brim helps to keep it on the build plate.
PET is flexible enough to insert the XT60H plug. Not yet tested with PLA (less flexible).
I Decided to create my own Version of the Prusa Enclosure Quick-Connector just because I had some XT60H Connectors on Hand and war curious, how this Project would turn out. Tecnically this Connector can be used for each Printer and every…
Another cool free file from http://www.cadnav.com/
youll need the : PD65W Schnelllademodul Typ-C USB-Schnittstelle unterstützt PD3.1 QC3.0 SCP PPS Schnellladegerät 5V 9V 12V 20V - AliExpress 502 for normally 1,51 € 4x M3x8mm -two cable -2x spade connectors
Use case If you need a USB quick charging capability at some place where you have any DC voltage between 6V and 32V available, the solution is very cheaply available online (around 2 to 3 € or $ per piece). My personal application was to…
Thanks to LoopFPV. Great TinkerCAD model that took less than a minute to make exactly what I wanted. FYI: The Hatchbox TPU does NOT match the yellow of the factory TPU parts. Printer brand: Creality Printer: Ender 3 Pro Supports: Yes…
There are two version: SpringyWalls (recommended) and regular ThickWalls. Make sure to turn on thin walls detection for the springy walls version. My settings Nozzle: 0.4mm Layer Height: 0.30mm Quality: Draft Supports: No Colored version…
I noticed that the XT60 housing designs online mostly take 22-16AWG wires. I like to push my XT60s to their limit so this model is able to house to 12 AWG wires (4.5mm OD). The two parts are held together with an M3 screw and either a M3…
This is a clip to hold the already very secure xt60 connector together. This clip is designed for the new style plug that is symmetrical on the outside and includes a terminal cap at the ends. Normally this is unnecessary but I use xt60s…
Backpack module for 5" FPV quadcopters. Please do verify the dimensions of your quadcopter: backpack is 20mm high. Check that your frame has at least this height. mounting points are separated by 24mm (measured center-to-center) mounting…
Simple housing with additional strain relief for XT60H connectors - one version for both male and female. You can solder two separate wires up to 12AWG (outer diameter of cables - 4.5mm MAX) or one “2-core cable”. Make sure to dry-fit the…
This is a wall-mount bracket for the GL-iNET MT6000 Flint 2 router. While the router does come with mounting holes, this: Offsets the router from the wall an extra 8mm to allow cables to go through a wall pass-through and be routed…
This is the protective cup for XT60 plugs (male and female). It can be handy for outdoor devices to protect exposed plugs from dust and some water drops, or to mark a battery that it is ready to use or depleted (you may print different…
Dies ist ein Cover für euere XT60E-M stecker von Amass. Habe es mit TPU95A gedruckt und funktioniert ohne Probleme. Falls bei euch die Toleranzen nicht ganz passen sollten, könnt ihr es ein kleinwenig hoch oder runter skalieren. Für…
Based on @Consti1606 work. Many have complained about having to scale up for his model, which is due to a very tight fit due to poor dimensional accuracy and lack of tolerances in some areas. The original model left permanant damage to my…
A quick, dirty, simple model to house both the male and female side of the XT60H Plug type, it MAY be compatible with others, it's tolerances are TIGHT (pending your printer), I HIGHLY recommend glue/epoxy. Print settings (test and fit)…
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Bitte die Stecker mit Sekundenkleber sichern.
a nice way to mount the XT60 and VTx antenna on to your GepRC MK5 FPV Frame the XT60 is angled to also accept 5.1" props and you might have to solder the XT60 cable at an angle to accommodate a VTx, etc. like me Print upside down
It is a Speedybee Mario 5 TPU design which has XT60 slot, 18mm GPS, and 2 SMA antenna
FPV SpeedyBee Mario 5 Custom TPU with follow parts: XT60 iFlight BLITZ M10 GPS V2 2 x SMA vertikal ELRS Antenna mount Short Video about this model you can find hier:
Here you find a few safety caps for the XT-battery-connectors. All of them are printed with TPU (Shore 95 or 90). You need a cable tie to attach it to the cable. Happy printing!
Hi nice to see u here :) Print should take a few minutes. It works fine with 0,3 layer height. You can put it before and after soldering. It's a few ways to do that ( before soldering, by ziptie, make a loop or just put on wire's by…
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
Adjusted dimensions to better find my generic XT60 plugs. Category: R/C Vehicles
Because of the frontplate, the hole does not have to be perfect, uses 2x m3 bolts and nuts, the length depends on the thickness of the enclosure.
Taking the opportunity of upgrading from i3 to MK3.5, i decided to rework the way i connect my PSU (which is relocated outside of my LACK enclosure). The new board has metal case, and thus must have the earthing line added, so my old…
This is a TPU grommet that slots in the frame of a SpeedyBee Master 5 HD to hold the XT60 lead securely. It also acts as a strain relief for the wires and the ESC. I had issues using the XT60 panel mount connector on the frame and been…
Hierbei handelt es sich um ein XT60 Cover, um z.B. volle von leeren Akkus zu trennen. Es passt genau über den Anschluss. Gedruckt mit TPU.…
This model allows you to mount a standard XT60 connector onto flat surfaces. ⚠ Note: It is mainly compatible with cheap, non-branded XT60 connectors. For example: it does not fit AMASS XT60 connectors. 🔹 Features: ✔ Fits both male and…
This is a shroud for an XT-60 socket which should fit into the hole in the case of a typical ATX power supply to replace the mess of wires with a single connector for the voltage you need out of the supply. I tested it with this…
This is an XT60 cap to prevent shorts when keeping LiPo batteries in a bag and to indicate charge. It's ribbed for easier removal, even with a tight fit. Also included is an STL as a regular cap instead of a doubled one. Pause the print…
It is intended to weatherproof a XT60 plug. Like for being used as a cars external charger connector or external power supply. It can be mounted directly to something rigid or also left hanging alone on the cable. If you want to mount it…
This is an adapter to power a device via 24V XT60 and/or USB from a Einhell Power X Change battery. I created it to power my TS100 soldering iron and a fume extractor (aka fan) from the Einhell batteries. Of course you can power any USB…
Can be printed without supports. Wires protection must be printed in vertical orientation
Found some XT60 plugs on thingiverse, but when printed they are all loose and fall off. Sloppy work. Designed these for perfect tight fit. Included two versions, original with thinner and revision 2 with thinker outer wall. Printed out of…
Based on jtpeyton Digitrax Throttle Dimensions. I needed to change the bottom to allow access to the Loconet Cable port (because I use a tethered system), and the lanyard attachment to fit in the holder for the Digitrax DT600 throttle. It…
I was recently looking for a power supply cover and noticed that there was no covers that had both the right connector and a lot of XT60 ports. So I designed my own. It has plenty of ventilation, 6 XT60 female Connectors and is quite…
Mounts for XT60/XT60H to a Hex Standoff. Design was specific to the ImpulseRC Apex EVO but should fit any 28mm hex standoff. Design is parametric, let me know any versions you need I can export additional models - see my design video to…
Hello, This is an XT60 holder for an TBS Source One Frame with or without the original Caddx Vista Antenna. I designt his because i often got the cable from my XT60 plug into my props. First i used the original Caddx Vista Antennamount…
Holder for attaching the new XT60 connectors with 4 additional contacts. Halter zur Befestigung der neuen Steckverbinder XT60 mit 4 Zusatzkontakten.
Needed a power source for my Pine64 Pinecil Soldering Iron, so decided to build an adapter to use the Makita batteries for this purpose. The required parts were purchased from Aliexpress: Makita 18V battery adapter XT-60 connectors XT-60…
I'm using this to power ham radio devices, but it's suitable for everything that's using xt-60 connectors. Splitter is design for sockets like those: https://pl.aliexpress.com/item/1005003656717372.html Use thick copper wire to connect…
There are a lot of raymarine suncover models out there, but I did not like them because of the flat top surface the all have to be printed easy. These models have a nice curved surface that makes them very beatiful. For that it is…
Print out of TPU. I print the antenna holder as-is, and the VTX holder with its butt on the bed. Assembly instructions Slide the standoffs into the vtx holder before assembly Slide the vtx holder onto the frame and secure with screw…
Three types cases for LM2596 Buck Converter with and without xt60h connector. No support easy print and no additional hardware to build. Simple click in Cases. I printed with 0.4mm nuzzle 0.20mm layer height. I Prefer PETG because is…
This is a remix of the XT60 mount as I could not get my slicer to not infill the connector "tunnel". Weird. Anyway, prints great and I included the original retainer top cover (unchanged) from the original post. A set STL is provided for…
Die Doppel-XT60 Buchse lässt sich einfach drucken, sollte die Mutter zu stramm gehen, einfach in x und y Richtung etwas vergrößern. Die 4 Einpressmuttern M3x4x5 müssen bündig sitzen, sonst geht die Mutter nicht zu drehen. Zum Befestigen…
I made this simple XT60-cap organizer to help not loose the caps while flying. It is best to print it using TPU. It has a slot through the middle that allows to bend it to more easily remove the caps. Thanks to this it could be made as…
No supports, brim or raft. 0.2 mm layer height. The best result is expected if TPU/ elastan filament used. Support creator here: PayPal me :) Patreon
![Grip mod - Single cable XT60 connector [Glue in]](https://media.printables.com/media/prints/810927/images/6269941_787395b4-66b0-49b3-9b47-ccd8ba760613_a671b1b8-179b-4ee9-8956-266e1eefc082/58d36c9b-e214-479d-b965-fae967da93de.jpg)
