Counting matching models…
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block…
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed to work well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block…
Calibrate your 3D printer with a test you won't just throw away afterwards. The blok should measure 16mm in all dimensions, and when you're done you can use them for standard PrintABlok play. PrintABlok are interlocking building toys…
https://youtu.be/J_-KUl4AaVw PrintABlok are interlocking building toys created by the 3D Printing Professor, designed to work well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building…
PrintABlok:ElectroBlok take PrintABloks and add common hobby electronics components like Arduino, servos, buttons, leds, and others, for rapid electronics prototyping allowing you to make PrintABlok creations that can play with you.…
printablok.com By mixing PrintABlok with a Benchy, we've created a print that is less useful for diagnosing your 3D printer, but a heck of a lot more fun. Now with more decorative greebles. And paddle wheels! Note: While this was inspired…
The old printablok hinges created by Marlin1974 were great, but had a tendency to break. This new ball and socket joint is much more reliable because it uses the strength of the 3D print layer lines in the right direction. Switch these…
Want to label your PrintABlok projects? Now you can use WritersBloks to put put your initials, write a word, or play a game with PrintABloks. PrintABlok are interlocking building toys created by the 3D Printing Professor, designed to work…
PrintABlok: BattleMecha are here and you can be a part of the fight. Print out the PrintABlok BattleMecha frame and assemble it according to the build illustration (below). Then take it to the next level and use other PrintABlok pieces to…
Print the parts in your desired colors. Add a small dot of superglue to fasten the flower and flower_center to the stem. For PrintABlok see: https://www.printables.com/model/47788-printablok-base-bloks…
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block…
https://youtu.be/4zj476n1lzE There are many ways to connect your Printabloks for different situations. H-type connectors are for general usage. T-type connectors are tighter and were designed to be used in places where a single connection…
The standard PrintABlok connector's success is largely tied to the material it was developed for (PLA) and the scale that it's printed at. So, if you need a connector that works at a different scale or with a different material, you need…
For PrintABlok see: https://www.printables.com/model/47788-printablok-base-bloks
4.1.2023 removing all the source files due to printables ignoring licenses Simple generator able to make anything from 0.5 base unit to to whatever size your printer and fortune allows. STLs provided are just a few of many possibilities.…
Sometimes things need some gofast(tm)... A supercharged V8 oughta do the trick! Category: Construction Toys
I added a PrintABlok Connector to the floater because the PETG parts were very difficult to glue together. So there is no need to glue the parts. Just put them together.
Use filament change feature in your slicer to swap colors. Also you can use ironing to make it look smoother, however it may leave a few little blobs on the print.
https://youtu.be/J_-KUl4AaVw Captain Recreator joins the BattleMecha bringing arm mounted Recreator3D's that will turn post consumer waste into useful 3D printer filament! Check out the recreator project: http://recreator3d.com/…
Panels are special versions of PrintABloks that are as thin as PrintABloks can be. The connector hole can be accessed from either side of the panels, but not both sides at the same time. Panels wok great for improving structural elements…
Does your PrintABlok creations have unsightly exposed connectors? Hide them with PrintABlok cover bloks. Covers of all shapes and sizes for all your printablok decorative needs. PrintABlok are interlocking building toys created by the 3D…
A blok modification that allows connectors to slide along a rail blok.
Can’t afford a fancy stream deck? What if you could build your own for a fraction of the price, and better yet, make it modular so you can add your own functionality? Electroblocks give you the power! You Will Need (Affiliate Links…
A hubbed wheel that allows for pass-through connections (or maybe even weapon mounts) on the outside of a wheel, allowing for trikes, and even supported load platforms for the PrintABlok Space Program to transport rockets from the hanger…
This work is a remix of the 3D Printing Professor' s (@3DPrintingProfessor ) PrintABlock system. The classes here enable you to create custom sized blocks as follows: from build123d import * from printablock import Connector, Block…
Big wheels for a War Wagon I'm building in the form of a weaponized pull tractor. Works with the base wheel axle. I did use some details from the kit wheel because I wanted it to have some style continuity. But otherwise, the mesh is…
I really liked the mechanical counter from 3D Printy, but I was not fan of the connection solution. I want to make my prints 100% 3d printable, without any metal materials or glue. After much time in blender I managed to remix the models…
Quick and Simple 200% scale PrintaBlok, But with added 100% connector holes to retain compatibility with normal bloks! I am slowly remixing the entire set of base PrintABloks from the 3DPrintingProfessor . Edit for 2024/1/31: Uploaded a…
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block…
https://youtu.be/J_-KUl4AaVw PrintABlok are interlocking building toys created by the 3D Printing Professor, designed to work well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building…
The studs fit for my printer. To make it fit you can play with: -Extrusion multiplier -Horizontal expansion -Horizontal hole expansion I can post a tweaked version when needed.
Time for the boats (Or other floaty things)! Has air trapped inside to offset weight on the water. Might need a little support on the ends. If your printer isn't terribly well tuned, you might need to seal it for it to be totally…
Road wheels.... You know, for those roads that aren't totally destroyed after the apocalypse. Works with the base wheel axle. Category: Construction Toys
the original Printablok hinges are loose and flimsy, so I designed a new version of the Printablok Hinge that can be tightened with zip ties. This will make articulated Printablok models more poseable. This is completely compatible with…
This is a nice combination of two incredible designed, that of a Pi Zero case from @Lulux and PrintABlok from @3DPrintingProfessor Taking the aspects of both designs, giving them a little smush together, and getting the end result of a Pi…
A set of minimalistic covers for PrintABlok, you can print the top layer as concentric to give them an even nicer look :) The wider blocks have a bonus half-block hole to be connected offset by half a block. (Useful to centre the panel in…
I did resize the nice owl of Cushwa and gave it a PrintABlok connector. Now it guards my PrintABlok Bird Feeder :-) For PrintABlok see: https://www.printables.com/model/47788-printablok-base-bloks
PrintABloks are good for more than just toys. You can use them to make useful things, too. Like a custom shelf for holding small things using a screw adaptor. This simple build showcases the functionality of PrintABloks. PrintABlok are…
It is difficult to hold small parts when you are trying to paint highlights or the entire part. So I created handles with half of a PrintABlok connector on one end to hold the part while painting and bases with a hole to easily insert the…
PrintABlok is a fantastic solution for joining 3d printed geometry together, without worry of printing orientation. I felt like this concept deserved an easy way to integrate it into CAD projects as it can be generally useful in all kinds…
Introduction PrintABlok is a system designed by 3D Printing Professor. It consists of stackable, buildable blocks in a variety of shapes; all of standardised sizes, and is very (and I do mean very ) open to extension. The so called…
Nature wall tablo - 1 EN - Due to the details, it must be produced in one piece for now. Production size varies depending on your printer, you can set and print in the sizes you want from your slicing program. Arrangements for the larger…
PrintABlok "pipe" accessory. Sorry not sorry. Enjoy~. -- UPDATE 3-12-20 -- Added updated meshes for the new connector type. Kept the old just in case. Category: Construction Toys
A basic set of extension PrintABloks to extend models without using connectors. 3/13/2020: These have now been updated to use the latest block from the Kickstarter. Category: Construction Toys
Build Chess with PrintABlok. Comes with drawers for keeping your pieces in. You will need: About 70 102h_Connectors 32 102st Slip Connector tighter 64 108 ShortBlok , 32 in 2 different colors 2 sides worth of chess pieces in 2 colors 2…
In a live stream about his Sky Force kickstarter Joe Larson, the 3D Printing Professor, mentioned that it might be cool to print the parts at 150% (24mm) scale but lamented that fact that he had a large inventory of 100% (16mm) parts. So…
To bring together the playful PrintABlok building brick/block system (by the 3D Printing Professor ) with the MakerGrid system I designed a few models and a specialized hybrid clip connector. With these connectors you can connect your…
Box for PrintABloks that use these 10x2mm neodymium disks instead of harder to find and more expensive 5mm spheres like the official box uses. Some tolerances added because these magnets aren't perfectly sized (I've used them before) and…
"T-SlotaBlok" T-Slot connector for PrintaBlok This is a remix of the PrintaBlok source to allow you to connect it to your TSlot based frame work, and a TSlot captive connector hole. The TSlot captive connector hole allows you to attach…
PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on home 3D Printers. PrintABloks can be built in all 6 directions, allowing for gravity defying building unlike any other building block…
PrintABlok 102h Connector Remix Keyring, Eyelet, rod holder Whatever you want this to be within your PrintABlok build, feel free! Originally designed as a 5mm rod holder, now used in life as a keyring connector… Have fun!
This model allows for a triangle connection. But not any connection; a Pythagorean triple: https://en.wikipedia.org/wiki/Pythagorean_triple Triangles are awesome because they're strong, and this way you can harness that power in…
Electrobloks - PrintABlok - Accessories Some additions for the really excellent system “PrintABlok” https://www.printables.com/model/75933-electrobloksprintablok-diy-snap-together-electroni 1.8_TFT_Display_Print_A_Blok size 4x3x1 - for…
Tak is a beautiful game for 2 players where players attempt to build a road across the board from either side to the side opposite. On their turn, players can place a piece or move a stack of pieces, dropping at least one as they go. This…
PrintABlok are an incredible, modular building system created by Joseph Larson. I love both the design of the blocks and the storage case but I didn't have any spherical magnets lying around and didn't want to rush out and buy a bunch.…
Round plates for PrintABlok. If you need other plates please let me know. For PrintABlok see https://www.printables.com/model/47788-printablok-base-bloks
A PrintABlok with room for a speaker and a I2S MAX98357A amplifier. PrintABlokSpeaker40 = 40 mm speaker. PrintABlokSpeaker36 = 36 mm speaker. The speaker can be secured by a few dots of glue. Together they make a digital speaker that for…
After Stemfie bridges , here come PrintAblok compatible ones. Using my PrintAblok generator you may print pillars of whatever heights your imagination allows. Get connectors from Professor here or print them from the saved project (I made…
You can now use some parts from the kbricks system on PrintABlok cubes (wheels, axles, gears, ...). PrintABlok has a cube size of 16mm. The cube size of kbricks is 24mm. You need 3 modules of PrintABlok for 2 modules of kbricks. You can…
Base para Blocks de Notas Dimensiones 102mm x 102mm x 60mm
A little widget to help remove those printablok connectors that just seem to be a little tricky!
this is to add to the printablok Collection https://www.printables.com/model/47788-printablok-base-bloks
I noticed somebody in the Kickstarter asked for a pen-spring BB gun. After playing around with such a thing, it wasn't very easy to print on a lower speced or lesser dialed-in printer (Which was the whole idea!), so I opted for something…
Printablok: Extended Shortblok collection This is a remix or more an extended collection of the Short Blok(Part Number 108) from the Printabloks Base set by the 3DPrintingProfessor. I have extended these to match up with options available…
"TSlotaBlok" T-Slot connector for PrintaBlok Additional Hardware Edition This is a remix of the PrintaBlok source to allow you to connect it to your TSlot based frame work, using additional (M3 sized) hardware. The TSlot captive nut…
I did several levels of thickness (th in the file name). Try what works for you. My original thickness was cracking in the PrintABlock part. I can no longer pull the thickest thickness by hand and have to use a tool (knife). Print the…
just a small housing for Arduino nano
Introducing PrintABlok compatible side panels for your Recreator3D MK6 “FunSize” pulltruder. Now you can bask in the glory, knowing you will be able to build additional storage onto your funsize for your tools such as tweezers to aid in…
This is an original case looking like a folder logo we could find on different operating systems. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive…
Show off your love for your PrintABloks, and organise your keys with the 102T connector keyring. Print this piece in PET/PETG for extra rigidity/longevity.
Holder for a 1.3 inch OLED display. I printed it with tree supports for the top only. I used this display: https://nl.aliexpress.com/item/4001145494936.html For PrintABlok see PrintABlok Base Bloks by 3D Printing Professor More…
Charge your phone wirelessly your way. Standing up or laying down, the choice is yours with PrintABlok. After receiving the charging module in the Alien3D November 2024 box, I decided it needed a better case. And what could be better than…
Do you find your wires for your ElectroBlok projects a bit of a mess? Are you trying to tidy up your generalized cables system? Fear no more! The PrintABlok tie down Bloks are here to help! With 10mm wide hook and loop straps, or normal…
PrintaBlok Comptible: Microsoft Lifecam Cinema Mount Why? I wanted to try my hand at making something compatible with PrintaBloks from the 3DPrintingProfessor , and I wanted to make a mount for my webcam for Octoprint How? Thrown together…
Did you receive a RoboPad from BlayzeTech as a Gift? Did you want to have a play while you decide how you want to make your own combat robot? Well here is my basic build, a nice little platform for you to have a go with a little 2 wheel…
Something to add to PrintABlock colelction. Category: Construction Toys
I designed this wheel as an addition to Ky3's "PrintABlok Knobby Hub Wheel" https://www.thingiverse.com/thing:4230078 Remixed from: https://www.thingiverse.com/thing:4171518 Category: Construction Toys
Just an addition to Cymons awesome PrintABlock system Tested! works nice. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 0.2 Infill: 10 - 20 Notes: Print with 3 perimeters and 3 or 4 top/bottom…
Here I'll be posting some mech related remixed stuff or my creations. log. - 4.3.2020 first pack https://www.thingiverse.com/thing:2055551 https://www.thingiverse.com/thing:3350504 https://www.thingiverse.com/thing:212824…
a printablok with a hat and bowtie. hat may need supports but idk tbh.
These models are modifications of the base blocks that add bloks that allow for creation of robots using the RoboPad and EduBoard breakout. Make sure you also download the professor's base PrintABlok sets to have the parts to build these…
Just a piece to make nice PrintABlock Cars. Goes nice with https://www.thingiverse.com/thing:4222888 Print Settings Rafts: No Supports: No Resolution: 0.16 Infill: 15 % Category: Construction Toys
Mainly designed to be used with cars where transitions from a 3 cube to 2 cube to 1 cube are needed. Remix of: https://www.thingiverse.com/thing:4171518 Category: Construction Toys
This is a protection box to store your Datablocks (See link below). It has been designed with an industrial look and can host 4 Datablocks. The design includes positions to add magnets (4 4mmx2mm) to lock better the box and also for…
Well, here it is. This is the Bloky Mutant mobile plate for the WhamBam Mutant. With this, you can bring PrintABlok to your 3D Printer, and with that you can use that existing ecosystem and do silly things… like add a servo and an arduino…
This is an original case looking like a folder logo we could find on different operating systems. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive…
These models are modifications of the base blocks that add bloks that allow for creation of robots using the RoboPad and EduBoard breakout. Make sure you also download the professor's base PrintABlok sets to have the parts to build these…
Quick and Simple 200% scale PrintaBlok, But with added 100% connector holes to retain compatibility with normal bloks! I am slowly remixing the entire set of base PrintABloks from the 3DPrintingProfessor . Edit for 2024/1/31: Uploaded a…
Print these cool shapes, queue up "Korobeiniki" and get building. These are some fun shapes that can expand your PrintABlok builds. PrintABlok are interlocking building toys created by the 3D Printing Professor, designed towork well on…
Panels are special PrintABlok pieces that are super thin with a special connector that can be snapped into from either side (but not both sides at the same time like a half block) allowing for a great way make a functional and attractive…
This is the conectablok! Supports optional. PLA is fine. Thanks if you print it. Game: try to stack as many as you can, without them falling over! If you achieve that, you can try and create as many interesting things and shapes as you…
