221 models
sehr schnell druckbarer Glücksbringer für Silvester in verschiedenen Varianten keine MMU nötig, einfach Materialwechsel bei 2mm einfügen Very fast printable talisman / lucky charms for New Year's Eve No MMU needed, simply a material…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
sehr schnell druckbarer Glücksbringer für Silveste kann mit und Ohne MMU gedruckt werden, ohne MMU einen Materialwechsel bei 3mm einfügen Very fast printable talisman / lucky charms for New Year's Eve Can be printed with and without MMU;…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
The Muur Talisman 2 versions.
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Brutalist David Cheeseman is the most expensive piece of modern art cheese in the game Supermarket Simulator. People have asked and attempted to recreate this figure and I decided to just post it. If you want to download and print out…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
The Bakugan Attributes are representative of the Bakugan's elements. These have internal slots for 6x3mm magnets. Use your slicers multimaterial painting bucket fill function to add color. Included FreeCAD file includes all of the…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
I lost the screw for my sink, and was unable to find a replacement part. Therefore modelled this replacement screw for Hansgrohe Talis s tap sink closer. For more details, see the model number 97522007 in hansgrohe parts list here . For…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Roller can fit 1 ⅓ Rubberband so it requires cutting a second band. For the most part follow the instructions at…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for PETGSource material: PET
Printed with 4 Perimeters, 15% Adaptive Cubic infill with PETG. Paint supports on the hole ceiling, change Support Options “top contact z distance” to .25 and “Pattern Spacing” to 3mm for easy to remove support.
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Elementalist Lux 3D Bust – Capture the magical essence of League of Legends with this beautifully detailed bust of Elementalist Lux ! Inspired by one of the game's most beloved champions, this piece brings her radiant elegance and mastery…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
A stupid joke print based on a stupid joke based on some failed gatekeeping in /r/xbiking. "French Talisman" in Japanese (at least according to Google Translate) Print file includes a pause for color change at 1mm height.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
This is a life-sized Saber-toothed cat skull. The model came from Sketchfab, and is the scan of a cast of a real fossil. I took the model and separated the mandible and cranium, then split each of them into two pieces for easier printing.…
StarCraft_Mutalisk_Fanart by Binhou. https://sketchfab.com/models/c6f44d4309cd46379e1eadd9d79453d5?ref=related To make Binhou's sculpture more printable I have thickened the wing membrane and split the model down the middle. The two…
To Do: Add comment re: beveling inner edge of PTFE tubes and cleaning up filament funnel hole if necessary. Update pics to latest parts Discuss tuning for rim slip vs o-ring slip and recommended roller surfaces. Cover o-ring replacement…
Simple talisman organiser for each player. You should be able to fit at least 2 of those inside the box.
Talismans from the animated series of Jackie Chan. These talismans represent each animal belonging to the Chinese zodiac, which in the series granted certain power to their bearer.
Twelve zodiac talismans, inspired by the Twelve Talismans from the Jackie Chan Adventures. Each talisman has internal 6x3mm slots for inserting magnets by pausing mid-print. You can buy a set at:…
I made a simple card holder for Talisman. I got the inspiration from https://boardgamegeek.com/geeklist/115468/item/4369639#item4369639 You can find the following designs in the file section: Adventure Cards Spell Cards Neutral with…
I present to you my personal post-ironic talisman. The loop on top allows you to use this totem as a keychain or a Christmas ornament, though a version without the loop is also included in the set. The rounded forms, inspired by…
Filamentalist mods rear or bottom discharge version
SAMLA Drybox housing Filamentalist Rewinders: Mounting for Filamentalist Rewinders inside of the SAMLA 22L Container as a Drybox. Filamentalist V3 added! (Pictures Pending) While testing V3 I found an issue that was always causing…
This talisman can be used in the game instead of ‘talisman’ object card, so you can really feel like you own THE talisman. I got mine printed in resin. For the gems I used cut LEDs in different colours.
Printed solid at 0.12mm layer height in 95A tpu
Conceptually inspired by insert to Spartacus (https://www.thingiverse.com/thing:2979444), but except minis tray drawn from scratch. My first bigger model, could be more optimized, but it did not exist 24hrs ago, and MVP is more than good…
Update 01/12/2025: QOL Changes und TPU Roller added + LED Mod, if used on NightOwl! UPDATE 05/16/2024: Modded roller_idler and counterpart, its now easiear to print, build-in support removed. To build this, you need: 8x100mm rods (2x)…
I like the Filamentalist F1 mod but also like the way the Filamentalist Rewinder fitted in the enclosure so I made this I printed in ABS using the Voron Print Specs Amount of filament used approx. black 90g red 70g BOM Qty Part 2 8mm x…
Poszerzony model @jinghuaGao_411549 z kosmetycznymi zmianami.
Halloween 2019 is right in front of us, but scary skulls, spiders or pumpkins wouldn't scare a real Nerd, because we always fight those creatures in our videogames. What we really fear is by far more frightening... I remixed some models…
Three railing compatible with Zone Mortalis platforms (4mm). 48mm long single 48mm long with some tubes 68mm long single I printed theses with a resin printer. They are too thin for filament printers.
This is a remix of some of the Zone Mortalis walls by Eberleg found here: https://www.thingiverse.com/thing:2609090 Not all files have been fixed, only the ones I needed. The only adjustment made is that I have made them solid. This…
This is a remix of the double doorway with bulkhead by Eberleg found here: https://www.thingiverse.com/thing:2609112 The doors have had the aquila removed for use with Horus Heresy / 30k but are otherwise unchanged. The double bulkhead…
Hi everyone, i created Insert for Talisman and 4 big expansions and 4 Small expansions - because i could not find one that i would like. Basically you will need only 1x main box and 2 expansion boxes. The third one is optional. It is…
Herb Grinders with a switchable design This herb grinder is designed to have a switchable design - simply twist the current design off to detach the magnets and you can re-attach a different disc. While you are not using them - the rest…
Mute talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
After trying several different solutions for my filament spool dry-box enclosure needs, I decided to design my own. I really liked the Ultimate Cereal Box Enclosure system by @GunplaMark , but wanted the reliability of the Filamentalist…
I designed this organizer to fit in the original box alongside my other talisman tray design. Add a make if you print this! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20…
3D scan of the legendary 1980s Czechoslovak brutalist concrete flower pot. The inside is hollow to use for anything you fancy. Original photogrammetry scan by @matousekfoto on sketchfab: https://skfb.ly/6SNHQ If you wanna support me,…
Columns platform size 58x58x4mm. Junction between column and walls size 58x48x4mm and wall platforms size 48x48x4mm. Easy to print with a FDM printer without support like there is no detail below the platform. 3D PRINTING SETTINGS 0.2mm…
Destiny raid logo keychain ready for dual extrusion! :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Notes: I recommend at least a 0,3 mm nozzle. Category: Keychains
Twitch talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
I modified the practical design of mask3007 by thinning the walls of the CardBox and CardBox_right files in order to contain the sleeved cards. As a result I changed the size of the CardSeperator file to fit the new measurements. I also…
Made a remix so I do not have to use tools to press fit and break one-way bearing. HF081412 One-Way Bearing
Overall dimensions are 1.5" x 1.5" x 3" for the original version, to match the taller, small buildings in the Alphastrike starter set. 6mm or about 1:300 scale Edit: Added midsection pieces for a 2" tall building. Designed and oriented to…
I created an inlay fitting for all the Talisman extensions. They can fit all the mini-cards, tokens, dices and player cards. You have to use a different box from one of your extensions to store the main cards in. I suggest that you use my…
FATALIS FROM MONSTER HUNTER WORLD; this thing took me 20 hours to kill so I desperately needed to chop off its head and hang it on my wall in real life. Highly recommend drilling a screw (or screws) from the back to make sure the head…
My interpretaiton of the Talisman of Curiosity from Magic the Gathering - Modeled at 50mm diameter
Filamentalist profile version stand.
Handfächer - öffnet in 15° Schritten Blatt01 und Blatt02 müssen jeweils 4 mal gedruckt werden. Beim Zusammenbau kommt zuerst die Unterseite, dann abwechselnd Blatt01 und Blatt02. Wenn ihr eine andere Anzahl drucken wollt, sagt Bescheid,…
Buck talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains
Attempt to change style of Filamentalist F1 mod Edit 22/04/2025 : The parametric f3d is made to export any rim and tyre width. New 10 sprokes rim. Print parts: ABS parts, follow Voron settings (40% infill, 5 top/bottom layers, 4 walls,…
I wanted a dry-box with a rewinder system to pair with my ERCF V2. Filamentalist was the ideal choice that minimize space; however, I could not find a viable dry-box for it. I wanted a cheap solution for each spool to be individually…
I decided to make my own talisman tray that was low profile so I could fit them inside the box. This is based off of the e-Raptor storage system tray, but a little different. edit After some testing I changed the slots should be able to…
Filamentalist Center Wheel alternative for my custom Filamentalist setup that doesn't require a HF081412 bearing. material: pla line height: 0.2 mm see screenshot for example of seam settings in orca slicer Log: V2 - Added additional…
I needed a mount for the Filamentalist rewinder (version 2) to integrate with my reprack filament storage. As the height between the individual filament racks was limited, i tried to keep it as low as possible while maintaining the…
3D model interpretation of the Talisman of Creativity from Magic the Gathering
Another awesome Pepakura file cleaned up ready to print, Cheers Jace
Some friends and I wanted something we could quickly make so we could get playing. So I made these low poly versions of the zone mortalis terrain, including ducts. Doesn't look fancy but it's super simple, prints super fast and gets you…
This card holder/dispenser sits nicely under Deniax's Dragon King Keeper ( https://www.thingiverse.com/thing:2464014 ). Keeps all the Talisman dragon stuff together. Put the lid on it, and store it as is.
The Samla Filamentalist F1 is a combination of the original Filamentalist and the F1 mod, with additional parts so that 4 rewinders next to each other can fit into a Samla 22l box to use as a dry box. The hardware parts list is mostly the…
Small metallic arches to support platforms without using a wall module. Can create walkways between tiles or simply create an elegant arch with 2 platforms. Size: 48x30x5mm. Just need to be glued on a column side. Easy to print in FDM, no…
The world is ugly and unfair and so is this die. It's been called brutalist by somebody with a better vocabulary than me so I'm sticking with that. Every feature is square and the "dots" are clustered around two opposing poles, the 456…
Thermite talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
I think you all know what to do Sorry about the license thing, I don't know how to deactivate it. If you manage to make money out of this… Good for you.
Mira talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Bandit talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
It has been observed that existing files do not have output tolerances applied when assembling after printing, which may result in occasional breakage during assembly. In light of this, we have taken the liberty of re-adjusting bolt…
3D version of the Talisman Logo Printed on a UM3, layer height 0.06 0.04 nozzle. Painted after by hand Category: Games
Montagne talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
The structure is made with 2020 aluminum profiles and polycarbonate panels , making it a cost-effective alternative to a typical four-slot filament dryer .
A brooch depicting Lacrima, the long-tailed cat. Renders the wearer immune to fall damage. However, it cannot prevent falling to one's death. Lacrima features in the fables of Raya Lucaria, in which she is described as a faerie cat who…
Filamentalist TPU parts Resized to 62mm ID with 2mm Thickness (66mm OD), Height 12mm & 18mm.
A keychain of Doctor Facilier's Talisman. You can print it with multicolor printing or as one piece with the heights adjusted in the slicer. Print Settings Rafts: No Supports: No Filament: overature pla Notes: print at 35% to fit the…
prints in 0,4nozzle at 0,2layer without support use 0,12 or adaptive fore more detais Image showes a SLA Resign Make HAVE Fun
The file 2020_Mnt_Center_Spacer_[option].stl that comes with Filamentalist V3 allows it to be mounted to a 2020 extrusion, but if that extrusion is sitting on a table or the top of a printer, it is so short that the large drive wheels of…
The Filamentalist_v3 connects to its base using a "clip-on" design, similar to the method used by Emu , and only requires two M3x8 screws to be installed in the back. The original enclosure (or box) used six toggles, which I felt were too…
This is organizer for Talisman with expansions. I recommend Printing 30 spacers for main box and 4 for small box. Organizer is devided into 2 different boxes. Main one to hold all cards and small one that fits into main one to tokens…
Celebrate the radiant beauty of Elementalist Lux in her Light form with this stunning full statue! This masterpiece captures Lux’s ethereal elegance, as she channels her mastery of light magic with grace and power. The statue showcases…
You want to glue a GW Zone Mortalis column to a wall ? You can do it with only 3 pieces of the column and 3 pieces of the wall. Lighter, and you can reuse some pieces for another kitbash. Printed with no support, but I advise a brim for…
Minimalist Succulent Planter with a touch of Brutalism Fancy a brutalist geometric brick type of a planter? Here's one. Size : ~ 125x125x80 Happy printing! Please check also my other designs. If you would like to support new product…
Ive tried use ChatGpt to create a picture I want and Hyper3D AI to create this model.
Dieses Modell bricht mit der mathematischen Perfektion der restlichen Serie und setzt auf natürliches Chaos . Die unregelmäßigen, scharfkantigen Überlappungen erzeugen ein extrem kontrastreiches Bild aus tiefen Schatten und hellen Kanten.…
Aperture science talisman, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Grip: http://www.thingiverse.com/thing:2000846 Print Settings Printer: ctc Rafts:…
A simple mount to attach Filamentalist v2.0 auto-rewinders to a RepRack shelf. I think v2 is also called Classic–I gave up trying to make sense of the project naming approach. Filamentalist v3.0 apparently comes with a RepRack mounting…
This is a very simple socket that mounts below a Filamentalist Roller/Rewinder/Buffer ( https://github.com/Enraged-Rabbit-Community/ERCF_v2/tree/master/Recommended_Options/Filamentalist_Rewinder ) and turns it into a very simple extruder…
This design captures the raw, sculptural essence of Brutalist architecture in a functional, customizable table lamp. The unique form, featuring a heavy, geometric black base juxtaposed with a translucent, repeating pleated shade, creates…
Jackal talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
The Cavern Monolith is a statement lighting piece designed to blend industrial, brutalist architecture with organic forms. A rectangular slab featuring intense, rough rock textures is interrupted by a deep, excavated cavity. When lit, the…
I saw a vase at a cafe that I'm pretty sure was just some left over building material and I couldn't get it out of my head, I redesigned to my memory. Do not print in vase mode.
Some neo-brutalist hooks for hanging forks, rakes, spades and other tools in your garden shed or garage. I printed a mix of PLA and PETG and the PLA is plenty strong enough. I upped the number of perimeters in Prusa Slicer for a bit of…
I needed an amulet for “The eternal flame adventure academy” and found this Talisman which was perfect.
Thatcher talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Print with ABS or other high temp filament. I printed with tree support without issue. Step files included since they are a remix of Sunlu's release. Included the PDF from Sunlu as well for some direction. The covers can be removed by…
4 filamentalist F1 in a smala 22l drybox BOM for fixing the 4xF1 on the 2 feet : 8xM3x14 M3x9x1 washers 8 M3 thread insert Insert the M3 threads fully, they are not flush, they go 2/3mm inside the foot. Drilling : Use the drill guide with…
The filamentalist rewinder is an awesome alternative to a filament buffer. It uses the filament itself to drive a roller that then rewinds the filament back onto the spool. The design also includes a pre-gate sensor option that uses Omron…
Rewinding Spool Holder When I first saw Filamentalist (https://github.com/Carrot-collective/ERCF_v2/tree/master/Recommended_Options/Filamentalist_Rewinder/Filamentalist_Classic_Rewinder) working, it was magical. There was one big flaw in…
v.2 Updated list of adventurers (english and polish) Just found I didn't include 4 adventurers form The Cataclysm expansion. I will try to think how to include them in next update. English version I made organizer for miniatures from…
Caveira talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains
Unleash dark fantasy energy with this Demonic Skull Talisman 3D printable model. This highly detailed gothic design features a horned demonic skull with sharp fangs, cracked bone texture, and ritualistic chain details. Perfect as wall…
