Counting matching models…
This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…
Print 'em, set 'em up, shoot 'em down. Probably only suitable for Nerf guns or low-intensity airsoft. The standing version requires quarters as counterweights. I recommend hot glue gunning them in place. Tinker yer own:…
This is my project Destiny where i designed the Destiny from the SGU with attachable Seedship and a stand. The model is a kit and fits together without any glue whatsoever. For easier assembly, please take a look at the video series about…
This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…
*** UPDATE *** My new DHD model is now available to go with your Stargate model- On Printables !! Download it FREE. *** UPDATE *** Crafted specifically for 3D printing, my fan-designed Stargate SG-1 model brings the iconic sci-fi portal…
This is my Stargate intended to be mounted on a wall. The gate is 80cm in diameter and it comes with separable Iris. The inner ring rotates and it has a preparation for eventual lihting. It is a kit and theoretically does not require any…
This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates. Here you can see a video about the project includin an…
Untested work in progress
This is my model of F-302 from Stargate franchize. Once again, the model is designed entirely by me and is meant to be assembled with no glue at all. (Thou in my cas I had to use a little bit of glue to fix a gap that appeared). The…
This is my model of the Stargate in the off-world pedestal with DHD. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths…
Stargate Puzzle This is an easy to print basic Stargate Themed puzzle. The parts concist of the main stargate frame (that can be printed in 3 colors if you prefer) and 23 pieces that fit within the frame. I printed my frame in Inland…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
This is a model of a Stargate that includes a working Iris. It comes with a pedestal based on the Tauri ramp in SGC. The Iris can be open and closed. For easy assembly, please watch the following video:
This is my 3D printed Chess with a Stargate theme so we have here Tauri and Goauld. Figures are labeled so that you know which figure is which and you can basically use any model you want as those are separate. In the future, I will…
This is a test of my own working Iris from stargate. At first I did not even consider to publish it, but after i published a video about it, i saw that there is a demand so here it is. The iris works, It fully closes and retracts. For the…
This is my project Teltak. Here I designed a Teltak or a Goauld cargo ship from Star Gate. The project comes in 2 versions. Static and Retractable. Static is - as the name suggests - model that is composed of three parts and is completely…
This is my own design for the coaster. It is in the shape of Stargate with Iris. It is little bigger but that is because I prefer “Tuplák” - 1 liter glass of beer and it fits to this coaster really nicely. The Iris has holes in it to lead…
This is my model of BC-304 from Stargate. I named it Ares. It is roughly 60cm long and arround 3 kilo. This is very complex model kit consisting of hundereds parts. I printed and assembled it over a month. The assembly may be kinda hard…
This is another of my Star Gate project. The Arora is 60 cm long and it has retractable third leg so that it can stand on its own without any stand. All fits togeher via pegs and holes. No need for a glue. Check this playlist for the info…
This is my model of the Ancient Cruiser from the Stargate Atlantis. The ship appeared only briefly in the episode Progeny. It is a kit, no glue required. The assembly is very easy but iI recommend to look at the assembly video just to be…
This is the project O'neill where I design a 3D printable model of the O'neill class from Stargate franchize. It is divided into several subassemblies. The model has one unique feature - a retractable landing leg so that it could stand on…
This is the mothership of Goauld Anubis. It has mechanism inside which allows it to retract the superweapons. All the moving parts are linked into that mechanism so one movement will do all. Appart from that, it comes with a fleet of 8…
Patch dispenser designed to accommodate 22mm square patches provided by Pistol New Zealand (PNZ) for IPSC targets. Features a check window and roll directional guide. Print flat side down. Have printed once so far in PLA+, very strong and…
I made this to have a lower profile, more spread out helper. Helps not wasting the stick on targeting dots, sticking them on here instead and the become reusable. There is a 10mm extrusion on the underside for a neodymium magnet,…
This is my project of Ori Mothership as seen in the Stargate SG-1. It is around 40 cm long, consists of several pieces that come together like a lego. No glue needed. It has retractable landing legs so no pedestal is needed. I recommend…
For best durability print in TPU, and for more fun in PLA ;)
10X10cm target holder with a bullet recovery system (if you are an acurate shooter of course ;-)) porte-cible 10x10cm avec un système de récupération des billes (si vous êtes bon tireur, bien sûr ;-) ) Print instructions Category: Sport &…
This is my model of the Death Glider from the Stargate franchise. I made the model myself and printed it and painted it. The model has all the features seen in the show - foldable wings, retractable cockpit windows, retractable cockpit…
This is my model of the Stargate in the SGC pedestal. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths while the pedestal…
3 knock down targets for rubber band guns. May also work for airsoft bb's, but the targets are designed to fall over with very little force. For best results, mount the base down or add weight to it to help keep it stationary. If you…
This is a model of the X-302 Prototype with the Stargate attached to it as seen in the episode 6x02 Redemtion. Models of the 302 is basically the same as my F-302 so use the instructions there to assemble it. There are only few changes to…
I remixed the design to print the main body as 1 piece so that no line would be visible when illuminated. I designed a hidden switch into the base to turn it on and off. (the center red crystal) I added an interior mount for the lights.…
I proudly present to you my most complex creation yet. Retractable Serpent helmet from Stargate. It has one complex mechanism that moves the whole assembly. It is in 1/3 scale. I highly recommend to watch the YT playlist about this…
This is a simple coaster based on the Milky Way Stargate of the TV series Stargate SG-1. I just added the iris to a design made by Tooner.it
A model of the Palace of Apophis. The model is my own design based on the Stargate movie and the series to connect them more. It has hangar bay for 2 detachable Gliders, Chamber for Apophis, Large Throne Room, Landing area for his…
This is my model of the space gate form Stargate Atlantis. It is basically the same model as before (the Milky Way one) but with different inner ring and three additional power nodes. The video about it is here: If you need further…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Remix (what I changed) I added two slightly different target patterns to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of -0.5mm, as to make the pattern easily…
Dyspenser zaklejek do przestrzelin tarcz strzeleckich. Pasuje do zaklejek 20mm z tego linku – https://tarczestrzeleckie.com/zaklejki Ewentualnie podobnych zaklejek sprzedawanych w rolkach: szerokość taśmy max. 25mm średnica zewnętrzna…
History/Story of the Naquadah Generator: https://www.gateworld.net/wiki/Naquadah_generator Prop utilizes Magnets to activate lights ( when Control Interface Handle is in the on position it activates a magnet activated switch turning it on…
This is my model of the Asgard Bilskirnir Class space ship from Stargate. It is once again assembled together as kit - with no glue needed. Not the best model I have done, but still. I uploaded the files in 7z so that the folder structure…
Stargate Dice Tower! Please leave comments and any recommendations. The base pieces and stargate pieces will need to be glued together. The Stargate should rest on top of the base, and it will sort of lock in place. The Stargate and Base…
This is my model of the Stargate from the Stargate Universe series. This s the Offworld gate in pedestal. It has a feature that the the entire gate spins in the pedestal with the help of 2 gears, An assembly video is here:…
Apologies for the photo, the models have moved on. The photo shows a 1:1 scale silhouette of the House Targaryen ornament and the House Stark ornament at 82% and 140% in height with fuzzy skin. Also attached is the source file for Fusion…
A small Nerf target to use when doing target practice. Print tip: Do 80 - 100% infill on the base
This marker tree holds up to four marker and makes for easy to recognize features for your scanner. It comes in two versions. One with magnet and one with a threaded base. It is intended to be used with 4x2mm round magnets Printing: Just…
Dodecahedron helpers to use with appropriate positionning targets for 3D scanning. Designed for 6mm positionning targets. I have created 3 versions : Blank dodecahedron Threaded dodecahedron for ¼-20 screw Dodecahedron to use with a…
Remix of @Whity Markers Magnetic Markers for 3D Scanning external 6x3mm disc magnets
To shoot at with a nerf gun and not have to walk to it every time you hit it to get it up again. ***Model in optimization, can be updated*** The base has to be printed with support, i will try to make a version that can be printed without…
This DHD is a remix of a 3D model by "Adder" that I found on Google Sketch-Up 3D Warehouse. https://3dwarehouse.sketchup.com/model/9680dec40b8e7de4de23d525ec10a4eb/DHD I modified the design to make it 3D printable. You will need a printer…
This is my model of the Wraith Hive Ship from Stargate Atlantis. The model is a kit, but some small greebles could definately use some small amount of glue to secure them in place. I really struggle with the organic-based look of the…
Parametric target shooting cards template Create your own target shooting cards with this template if you run out of cards! The OpenSCAD file allows you to create one or five targets, all with a single parametric CAD file. Or, just print…
Swinging target for Nerf / Airsoft / Orbeez guns. All pieces snap together, so you shouldn't need any glue to assemble. There are two options for the target, hexagonal or circular. The legs for the stand contain print-in-place bearings to…
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
USS Icarus from Stargate Work In progress Not my design, found it here https://www.turbosquid.com/3d-models/free-3ds-model-ship-space-spaceship/892602 I just made it printable. Have to be big (100%) for 0.4 nozzle Didnt print it yet. You…
The base stargate model i made for this lamp https://www.prusaprinters.org/prints/84419-milky-way-stargate-led-lamp in case somebody could find it useful. I grabbed the glyphs' svgs from Wikipedia, author:…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
This is the first part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…
This stargate is designed to fit a 5V led strip with a switch (round hole) and a microusb to dip adapter (rectangular hole + support). The bottom lid is optional, i put one in mostly to make sure that my despicable soldering stays hidden.…
Ever wanted to practice your nerf skills? Well here it is!
This is my detailed model of the Cheops Class Pyramid ship as seen in the movie Stargate and few episodes of the series. Though the ship is in its landed variant and cannot change, it has one big feature. The top can be open and show a…
First DLC or rather set of additional figures for the base game - https://www.prusaprinters.org/prints/149230-stargate-chess. This one is mixed DLC and you can have: - X-301 Interceptor - Puddle Jumper - Ancient Aurora Class - Ori…
This is a tape dispenser for tape with patches for IPSC targets. It can hold a tape 23mm with 1000 patches 20 mm in diameter. The hook must be glued on the back. The screw can be unscrewed with coin €1, €2 or 50 cents. It has an opening…
Here is our version of Stargate from tv show Stargate SG-1. This is my new favorite print. well detailed & prints without supports. Hope to see a bunch of this printed this year. We are also on gumroad where we list cutup/slicedup props,…
This is my model of the Wraith Dart from Stargate Atlantis. The model is a kit and does not require any glue. It fits through my Pegasus Space-gate so you can nicely recreate the scene of it comming out of the gate. I really struggle with…
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to…
There are a variety of mounting options available for clay pigeons and this is another one. Not any better than most of the others, just an alternate way of doing it. This holder was inspired by something I saw on Amazon, but I created…
This is my model of the Wraith Cruiser from Stargate Atlantis. The model is a kit, but some small greebles could definately use some small amount of glue to secure them in place. I really struggle with the organic-based look of the Wraith…
Custom lithophane stand included. This was a test using LuBan instead of my usual applications. It needs work. Software used: Photoshop and LuBan Dimensions: 135xx 133mm x 3.2mm(3.52mm with frame). Print settings and information:…
5ft Lighted Stargate controlled by arduino (Just a heads up its a very long print 900+ hours) Not a beginner project. Need an understanding of wiring/soldering. Need a understanding of programming arduino boards to load my program.…
This is a small target dedicated for Airsoft. For plinking or practice, this target will leave a hole on impact, so you can see and confirm your shots. BB's are able to penetrate this target, so be aware where your bb's are going after.…
Created as a secondary stand imitating StarGate Command, for the incredible Kristian's Stargate: https://thestargateproject.com/ Demo: https://www.youtube.com/watch?v=SJy8u8dllmY&t=84s including ZPM as Chevron 8 The ramp needs M2.5x12mm…
Diffirent sizes to fulfill your needs. Al the sizes are good for dryfire practice. The smaller ones are good for building micro stages for stage design. Smaller sizes also great to simulate greater distances.
This is my version of the original BC-303 version of Daedalus made for the 8th season of SG-1. This version was unfortunately scrapped for the BC-304 Daedalus Class but we can actually see the top view of the original concept in the…
A simple shooting target patch dot sticker spool holder for 11mm and 16mm, 20mm or 40mm dot stickers. These will fit a spool of 1000 stickers. A stacked version has two mirrored sides that should be glued together to form a single item to…
This is a neat target for BB guns and Airsoft guns. When you hit a target, it swings around the frame. I recommend using TPU for the actual target pieces so that they don't break. Print the top rods 100% infill. Use superglue to attach…
This is a Nerf target that rotates or "crawls" each time you hit the top bullseye. My ten-year-old son was looking for Nerf targets and couldn't find any that he liked, so he made his own. This is the first 3D image he's ever made. To…
Inspired by the Disc Dot, I waned to create a quick-printing aiming aid for putting practice. Latitude64 Pro chain size.
Another great file uploaded for free from the https://www.onekura.com/ . All credit goes to the original designer, Cheers Jace Print instructions Category: 3D Printer Parts
Remixed from the 3 sources listed. The ring is approximately 190mm diameter and the height with the stand is 205mm. Remixed from: https://www.thingiverse.com/thing:87691 https://www.thingiverse.com/thing:2483545…
Naquadah Generator used in the TV series Stargate SG-1, Atlantis, and Universe. Please note that there is a print list that specifies quantities and colors of parts. There is a drawing to help you associate the part names with their…
Just a simple Stargate Ornament - just in time to trim a tree Print instructions Easy print using PLA! I designed this with a little play between the Stargate "stem" and the Staircase Unit - you can either glue it in place, or slide in a…
Die Pins kann man verwenden um die Funktion zur Ausrichtung mit dem Foto zu Nutzen. Die Pins werden einfach auf die Bienenwabenplatte gesetzt und über die App von XCS kalibriert. Danach kann man einfach alles über das Bild ausrichten und…
I made a 1:1 scale model of a White Flyer Blackout clay pigeon target mostly because I thought it would be a fun thing to model and I've been really into sporting clays lately. I figure a 3d printed clay pigeon probably doesn't break nice…
Simply print flat on the bed whitout supports
REMIX CHANGES: I combined the three pieces that constitute the supporting structure/base for the target. The original relied on gravity, and maybe some friction to keep the structure together. This version is stronger and more rigid, but…
Model of JSB 10m target shooting pellet. One with JSB logo, one without logo. Model without logo - print upside down.
my costum Stargate & DHD - Decoration width: 13cm; height: 19cm; length: 21cm enjoy :) Printer: BQ Witbox 2 Material: PLA, white Layer height: Base: 0,2 mm; Gate: 0,1 mm; DHD: 0,1 mm Use the "Ereignishorizont zum Ausschneiden.pdf" file to…
Mit diesen modifizierten Klemmen und dem modifizierten Arm können die Kameras direkt an den Target Vision 360 Lichtring angeschraubt werden. Es gibt keine Verbindung zur Wand oder zu einer Bodenplatte. Hält auch so bombenfest. Step 1:…
They come in many different shapes and forms. Can be equiped with 4x2mm or 6x2mm round magnets in order to have them stick to metal parts (like on cars) or to stick to each other. If you have no magnets, the marker works fine without. The…
This is my model of the Ancient/Asuran Light Corvette from the Stargate Atlantis. The model is a kit and does not require any glue. The antennas are skipped modelwise and are done with toothpicks. I divided the model based on the color of…
There's 2 STL versions attached with different sizes, also a Blend file in case you whant to make an edit. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 5% Filament material: PLA Notes: Blend file is configured in…
A simple USPSA target for dry fire practice. *If you use this with a real weapon make sure it's unloaded. Matter of fact follow Coopers rules! I take no responsibility for stupidity or negligence. ALL GUNS ARE ALWAYS LOADED NEVER LET THE…
AOcolossus hope this is what you were after, I wasn't sure what size you wanted it or if you need it split print ready or hollowed so it can be worn on the head? Cheers Jace. Oh and do you still want Horrus done too in a similar fassion?
Well I bought the wrong cards, and loads of them. Turned out I needed 170mm for my steel target. So I made my own 140mm box. Indestructible by 6mm plastic BB's. I've been using it with 4,5mm steel BB's (at 3 joules) and it shows, although…
Badge de l'expédition Atlantis de la série Stargate Atlantis, fixer 2 petits aimant 6*2 et il ira parfaitement sur votre réfrigérateur ou autre ;) Possible aussi de l'adapter pour le fixer autrement. Pour un meilleur rendu faire un…
This model as been cut into several sections for an easier print. The rim is separated for the pyramid. This makes it possible to print them in different color. The rim section connects via the 3 stud to the pyramid section. Fist glue the…
This design is a remix of Metric Maven's Soccer Target over on Maker World: https://makerworld.com/en/models/621959-soccer-target#profileId-546028 These are perfect for dialing in those corner snipes, when printed in TPU these targets are…
