Counting matching models…
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
These accessories prevent dust or pieces of filament from getting stuck in the Z axis and under the side covers. The shoulders of the PrusaCoreOne_DP_ZAxe.stl files must be directed downwards; they enter the holes in the platform. Two…
I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
Apple Lightning to USB C cable protector for your new cables. Maybe you need setup upside down this model on your slicer. I used raft while printing. You need to slice it so that the narrow edges are perpendicular on the print bed.
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5. I suggest turning on ironing in the slicer, 15% infill, automatic painting supports and…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Keep your furniture, walls, and equipment safe with this simple yet effective Corner Protector Guard. Designed to absorb bumps and prevent scratches, it’s ideal for desks, tables, cabinets, or workshop setups. The curved inner shape fits…
This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
This is a protector fan cover to avoid getting the fingers inside by accident. Based on FeNi64 that it has a file of the model but I couldn't open it to print it. No supports need it Donations through Paypal
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Since I published this miniature vice with the optional table clamp, it has become very popular. And I have started to use it myself for numerous hobby activities. If you don't have it yet, feel free to get the latest version here:…
Remixed the rear dust protectors from @dancan13f full set (awesome, love them) so they don't cover the entire back vertical surface, and can fit an 8mm magnet. Replaced the vertical bars with a low ramp so anything that falls should…
Corner Guard attached with simple adhesive pads for photos ... printed in TPU Kantenschutz; Schutz von Tischkanten; Eckenschutz kann z.B. mit einfachen Klebepads für Fotos befestigt werden …
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Simple plug protector for the rectangle Starlink antenna cable - this is for the antenna and router side of the cable. The plug is identical but the housing for the plug is slightly different. I printed it in PLA, but have also done TPU.…
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Top and bottom tank protector for keeping your resin tank safe in or out of the printer. M4 nuts required for bottom section to screw together! printed these on a Creality K2 Max in PLA Category: 3D Printer Accessories
Print Material For inside use: any material you like For outside use: PETG, TPU or ASA No supports needed. Recommended layer heights M4 - M7: 0.1mm layer height M8 - M9: 0.12mm layer height M10: 0.15mm layer height M12: 0.18mm layer…
A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…
I created a hockey stick protector using the Warrior Sabre Taper Senior Size Hockey Stick. The Print is straight so you have to use a blowdryer to manipulate the model to your stick curve. This enables all stick curves and types of…
Printed with TPU 90A
This is an HDD tray for a Fractal Define 7 XL (and other models) with an optional SAS protector. The tray is a drop-in replacement or alternative to the original “FD-A-TRAY-001” tray from Fractal Design. Or also called “HDD Tray Kit -…
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
I really like the zorro, but I needed something to protect the gimbals in my bag. So I whipped this together. It's a simple gimbal protector for the radiomaster zorro. Rotate 180 (print upside down) in your slicer to print without…
Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…
This print protects the x-axis cable from being bend while working. To assemble you just need one of the cable ties that came along with the printer. Print instructions Just print with the flat site downwards in 0,10mm up to 0,2mm with…
XT60 Charged/discharged battery indicator protector caps I print 3 colours and use the blue for battery packs at storage charge. I've printed in TPU but there are a few flexible PLA's available that work well with this model. Print…
Power Plug Protector Box A practical protective box for electrical plugs and extension cords. I recommend printing with PETG or ASA filaments – both are suitable for outdoor use, with ASA offering superior UV resistance and long-term…
Remixed quest 2 lens protecor. Print 2 of them and rotate (not in slicer) accordingly to each eye. The glasses spacer/lens protector is design to keep your glasses from rubbing on the lenses causing scratches on them. this is useful if…
Tips : Wrap a layer of clear tape around the TYPE-C or USB-A/ lightning head before install, for a stiffer grip. If your cable is produced before 2019 try the old lightning ( on usb-a…. folder)
I have printed and installed this mods on my bao but no field tested yet Supports needed for guard part.
This part replaces the spool holder on the Elegoo Neptune 3 Pro. The Neptune 3 Pro has a large spool holder that increases the height of the printer. I use a filament dryer on a bookshelf above my printer so the built-in spool holder is…
Updated v1 box with v2 cantilever clips and included more sizes which can be found here --→ https://www.printables.com/model/146721-cable-management-box Cable management box to store surge protectors and tidy up cables. Now with…
This is a remix from https://www.thingiverse.com/thing:4745565 (by Hodgepodge_Foxe). Thanks to Hodgepodge_Foxe for providing the f3d files: "Somewhere up in the 3d printing heavens, there is a choir of angels 2000 deep singing praise to…
I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…
A small print that you can clip onto your Sticks so they stay center and can't be pressed anymore. Essentially locks the Sticks in place. Protects against bends, pressing forces or anything else. Print in TPU or any other flexible…
This playing card deck case is an easy print and disassembles into two card trays. The case snaps together and holds your deck securely. It's designed to work with standard-sized playing cards. Each half of the case has an opening to…
Stick protection for PS5 Dualsense, ideal when traveling and just want to toss the controller in the bag Placed on the side with just chamfers it doesn't need supports ! --------------------------- Use of PETG is recomended to get the…
Use case Many of our workshops (or call them maker-spaces) could probably need a bit more frequent vacuuming. But who has the time to store away all our valuable small parts from our workbenches or desks? These nozzles will protect all…
Lens protector for DJI Goggles 3 (May also work with Goggles 2 or Integra but I don't know for sure) Printed in TPU with 40% infill.
My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…
Protect your finger while cutting things fast in kitchen! Print instructions 0.2 mm layer height, support from table.
This is a printable 3D model of the echo detector from S.T.A.L.K.E.R.. The slots in the panel are the right size for 5mm slide switches. (These are the ones I used: Amazon Link ). Here's a link to the ESP33 development board I used:…
This is a remix of Bambu AMS Feeder Protector / Adapter by OurAngryBadger which in turn is a remix of Bambu AMS Feeder PFTE Adapter by ktothestank . Bigly thanks to them for their design work. The purpose of this is to clip on to the top…
This design is used to protect the USB cable from breaking at the connection. I made the design both in OpenSCAD and FreeCAD so you can edit it based on the size of your cable. You will need these dimensions like in the photos to make…
Protect you KTM rear shock from being worn out by the rear wheel mudguard. I printed it in PETG with 90% and 100% infill. Fit is not 100%, but you should hear it snap when it fits correctly. Lasts probably 10-20h. Maybe more, but I…
Inspired by the cineback model for the fx3/fx30 I decided to create my own for my rig that allowed me access to the hot shoe. This model also allows for the camera to be on a smallrig quick release plate so I can go light weight when I…
Until I get a table for my XL it's living on the floor. This model is to prevent damage to the LCD.
Print it as you like. I printed it in Fiberlogy FibreFlex 40D light green as other flex parts for bambulab, because this filament is so nice...
RC: Flysky Noble NB4 Protector リミックス可能 必要：M3 Bolts 上下取付可能
Don't you hate it when you take off your snap case and you've nowhere to put it while you're gaming? Fret not - this screen protector allows you to store it on the back of the device while in use. You'll never lose it, and it still…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This screen protector was redesigned from the ground up to fit the Miyoo Mini Plus (and the original mini), with the goal of making it even more practical with the following new features: A cutout for a mini jack so you can keep in your…
A slim and discreet case for the on the go opportunities. Fits in your pockets nicely. Snaps shut. If you want to make it a bit more secure pressfit some magnets into it. (5mm diameter, 1.5mm thickness). You will need one “A” part, one…
Just a simple design to protect the ends of my track saw rails I got for Christmas. They slip on the end and are long enough to cover a new zero clearance rubber edge. Recommend PLA for a little flexibility in the model as it should be a…
Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…
Model can be printed with basic settings, such as 3 perimeters / 20% gyroid infill. Settings don't really matter. Make sure that you have the same thread type… 3/8" also exists If you'd like the reinforced female joint protector, you'll…
What is it? This is a simple but effective cover or guard for a light switch for when you don't want to accidentally flip it. How it works All it takes is to unscrew the existing screws from the switch and use those screws to install the…
This is a gimbal and switch protector the the Flysky FS-I6X Transmitter. It clips on where the lanyard would go. It may work with the Flysky FS-I6 but I don't have a transmitter to test it on. If someone prints it for the I6 and it fits…
What should've come with the radio... Features Fits both stock (10mm) and wider stick ends up to 16mm in diameter Full protection on toggles and dials Anti accidental power-on Customisable name plate area Recommended Print Settings…
Long protector for the lightning cable. Easy to slide on and off.
This is a remix to add some “fun” themes to your Centauri Carbon or protect the finish from wear of the spool. I also have some matching fan covers you can print on my profile here→ https://www.printables.com/@Kingsouth27_1378509/models I…
Secure your Steam Deck Joysticks/Thumbsticks to prevent accidental movement or clicking during transport or storage. Similar projects require screws, magnets, moving hinges or TPU. My goal was to simplify the design for a fast print…
– Update: -V2 with slightly rounded corner and now comes with hex nut insert holes. Had to design one after a little dent was identified after 1 month of installation on my roof rack. So here I share my files. Instruction: Print all 4…
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/242221 === Big enough to carry your pills, small enough to fit in your pocket. Top screws on easily. Measures ~ 30x12mm ===…
I searched everywhere but couldnt find any thread protectors for any 1/2x28 (12.7) threads so here u go ;)
Can protect the probe body by triggering contact stylus, probe must be active and in protective mode to react. Won't help if you handwheel the Z at Mach speeds. Recommended Print Settings: Seams-Random Walls-4 Infill-Gyroid ≥35…
When you're making a Bed Mesh, remove it or it will interfere by really tightening the ribbon
HERE IT IS ! THE MODEL WHICH WE ALL WAITED FOR ! THE: GROIN PROTECTOR / PROTECTION ; TIEFSCHUTZ ---------------------------------------------------------------------------------------------------------------- After a bit of search, i…
Voronoi desktop coaster, 10 centimeters in diameter.
A small print that you can clip onto your Sticks so they Stay Center and can't be pressed anymore. Essentially locks the Sticks in place against the Plastic Hull of the Steam Deck. Protects against bends, pressing forces or anything else…
Corner protection is a cheap, easy to print without supports in a simple functional design.
Protect your cargo and straps with this Ratchet Strap Corner Protector . Designed to evenly distribute tension from ratchet straps, it prevents damage to both your load and the straps themselves. The wide contact surface keeps pressure…
Use filament change functionality to stop the printer at right layer, slide in the strip of filament of another color and resume the print. You may require a brim to keep the model stuck while you sliding in the filament.
Printed flat down with supports
1] print the cable protector according to the diameter of your cable (2.5 / 3 / 4.5) 2] break the base : 3] insert your cable printing tip : print at 200°C (for PLA) activate the fan
Remixed this to protect the usb-c charging cable for the 2017 Macbooks that charge with usb-c (Thunderbolt 3) UPDATE: Added a new version that is narrower so as to not block the other port next to the one you're charging with. Category:…
Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…
The Compact Muon Solenoid (CMS) detector is one of the big four experiments of the Large Hadron Collider (LHC) , the world’s largest and most powerful particle accelerator. The LHC is part of CERN 's accelerator complex in Geneva,…
This model is compatible with the lego system.
Bring medieval mystery to your prints with this brooding Gothic Gargoyle Sentinel! Perched atop a square plinth, its muscular form crouches in eternal vigil—horned head tilted forward, razor‑clawed hands gripping the ledge, and vast…
A solid corner protector, like on the suitcases from the old times :)
This is an improved antenna, buttons and display for this Stalker Bear Detector . With these improvements you'll find artifacts in no time! Print instructions The antenna part has quite a lot of thin parts. With FFF 3D printers it may be…
This is a remix of the original cable ramp to make it longer (250mm). I paused the print 3 layers from the top to swap to a different color. Printed in eSUN PLA+ black and yellow. No supports needed. Same license as the original.
Protect PSVR2 USB-C plug and PS5 USB-C socket in case of accidental cable pulling to sides. Printed from PETG, 0.4mm layer, 15% infill. Any (almost) settings will work. Fusion 360 source included.
I only added the Logo. Settings: 0.20mm Standard +custom settings: Outer wall: 60 mm/s Infill 100% no support PLA / PETG / TPU
