Counting matching models…
Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…
This is a screen mount for the BigTreeTech Pi TFT43 touch screen to be mounted on the Voron Switchwire or the Ender 3 conversions. This screen is powered directly from the Raspberry Pi ribbon cable and best of all its plug and play - no…
I couldn't find a mount that fit the PI TFT43 4.3" screen so I remixed the design linked below to fit and designed a bezel. Print with normal Voron part settings, no supports needed.…
I designed this to so that the BTT TFT43 V2.0 could be mounted to a Switchwire. This drops about 15mm lower than the bottom of the skirts, so you will need some clearance. The housing mounts to the skirts, in the same manner as the…
A mount for BIGTREETECH PITFT43 (4.3" touch screen). BOM 4 pcs of PITFT43 mounting screw (come with PITFT43) 5 pcs of M3*8 mm 5 pcs of M3*20 mm 5 pcs of M3*D5.0xL4.0 heat set insert (standard voron heat set insert) 1 pcs of M3 t-nut
remix of 2 different mounts to make a more solid mount for the v0.2, added a little flair to the side of the frame aswell Tilted the screen so it wasn't flat like a pancake, and took up less Y axis real estate on your table/desk, and…
Compatibility BTT PI TFT43 DIP Raspberry Pi 4 Print Instructions Use Default Prusa Slicer 0.20mm Quality Print Settings Nozzle Diameter : 0.40mm Filament : PLA or PETG Infill : Gyroid 25% Perimeters : 3 Supports Support on build plate…
This is a REMIX of 2 other great mods that are out there for the CR-10 and for the TFT43. It felt pointless to recreate them from scratch when they are such great designs and they worked well for this mod. So i want to thank the original…
After trying to convince myself that "not being able to see the entire screen after the clicky-clack mod wasn't too bad" didn't work, i made a remix of Ken226's BTT screen mount. Noticed my door was scraping the top of the case, so i…
UPDATE: 2024-July-19. I posted an updated V3 step and stl. needed to provide a little more clearance as my hinge started sagging and needed to clear the screen cover wanted a mount that extends the screen out 20mm more to give clearance…
Use this mount wiht Switchwire screen enclosure. https://www.printables.com/model/405160-voron-switchwire-btt-pi-tft43-screen-mount Printed with standard Voron settings and supports on build plate only. The models are in correct…
Instructions: You can print this at regular height of 0.2 except the overhang part. To get it to work, print with variable layer height of 0.15 at the overhang for this future to appear (or just print at 0.15 layer height). You might need…
Remixed original model to make it suitable for Bigtreetech TFT43 display which has very similar dimensions but different mounting holes positions. Follow original model for assembly instructions and hardware. 4x M3 threaded inserts 2x M2…
Modified version of the LDO BTT TFT43 screen mount for Voron V2/Trident to ClickyClack door mod.
After looking around for a few weeks for a mount for this display, I finally decided to make one myself. All you need is: 2 x M3 heat inserts 2 x M3x6mm screws 4 x M2.5x4mm screws (included with screen) 2 x M4x12mm screws with T-Nuts…
The LDO voron kit comes with a BTT-pi TFT43 touchscreen and a mount for it. With a 2cm-thick clicky-clack door, the screen needs a deeper mount - this is the stock “thick” mount (and the model by rchamp uses the same depth, but adds a…
To be used in conjunction with https://www.printables.com/model/776889 Note DSI Displays are not currently supported by BTT CB1. A Raspberry Pi is required.
Bracket to mount the BigTreeTech PI TFT43 to the original screen mounts for a CR-10 S Pro.
to be used in conjunction with https://www.printables.com/model/773017
Display frame + holder for the front skirt of Salad Fork v1.1 for the BTT PiT FT43 V2.0 display Replaces the Display_Skirt_x1.stl from the original. The Front_skirt_right and Front_skirt_right from the original can be used as-is, so this…
No support. Brim is necessary. Nozzle 0.6mm is recommended.
Its the same as Ken226's model only difference is it can fit the Y-Idler part of Enderwire using a press fit m3 nut and a short m3 screw. I wanted to use his model and this helped me thought maybe I would upload in case anyone else needed…
Remixed to better fit V2.1 with the two buttons on the top of the display and added a channel for the side ribbon cable.
To be used with the Flat Mesh Skirts for Voron 2.4 ( https://www.printables.com/model/608754-flat-mesh-skirt-voron-24-350300250mm ). I remixed the original to be able to mount a BTT PiTFT43 2.1. Similarly to the original, the cable can be…
WHAT Box for BigTreeTech TFT43 display mounted on 2040 extrusion. ( in my case used on RatRig VCore Pro printer) More questions? Don't want to miss any announcements? Do you seek support? https://www.facebook.com/groups/679001895990790…
A simple mount for mounting a PiTFT43 to a printer with 2020 extrusions. I originally made this for my TinyT. Thank you for interest in my model!
PiTFT43 Display Mount for Ender 6 use existing screws
Voron Switchwire mount for BTT PI TFT43 V2.1
Driftrotor's mellow screen mount is a thing of beauty, but the mellow 3.5" screen was nothing but problematic for me. The BTT TFT43 works great on my Trident, and fits decent enough on the v0, there just wasn't a mount for it. I took…
Hi, A while ago i printed the original schreen case from Kenn226. and used it for a long time .But now i had the idea it would be nice looking if there where some accent lights in the case . So i decidet to do a remake . And i hope you al…
I remixed the Thicc Clicky Clack front skirt for 350mm to provide additional door clearance, and I’ve also modified this screen mount to ensure proper fitment while preserving the original design language. You’re welcome to check out my…
Wanted a compact screen mount for the BTT TFT43 that didnt really increase the footprint of the RatRig V-Minion. I just run the ribbon cable underneath and into the electronics compartment. BOM: 2x6mm T nuts 2x M6x12 SHCS from the RatRig…
UPDATE: 2024-July-19. I posted an updated V3 step and stl. needed to provide a little more clearance as my hinge started sagging and needed to clear the screen cover wanted a mount that extends the screen out 20mm more to give clearance…
Modified version of the LDO BTT TFT43 screen mount for Voron V2/Trident to ClickyClack door mod.
you will need 65mm space from the top of the extrusion
I bought a Bigtreetech Pi TFT43 V2 touchscreen for my V0.2 to standardise between my different Vorons. I ran my V0.2 headless before and I really liked the one piece design so I remixed this one to add a mount for the screen. It can use…
Just a mount for a btt tft43 screen. Will need heat nut inserts for the main base
Print standing up with supports for maximum strength
The LDO v2.4 rev C kit shipped with a BTT 4.3" TFT RasPi display, and the default mounting position is in the front-center of the bottom skirt. As part of the associated top hat mod, this part allows relocation to a top corner; the…
The default display location on a Voron v2 protects the top edge of the display; relocation exposes vulnerable components, and this modified frame covers them. The loose fit is intentional, both here and in the original…
Mounting BTTs TFT43 at original place, no support, no heat inserts. Just attach the holder on original point and place the frame over the TFT.
Original screws that came with the screen are not long enough. You have to buy M2.5 x 8mm screws. Screen angle is 30 degrees.
This is a slight remix of Bigtreetech TFT43 V3.0 by BigFunkyMan. I wanted to install this case in the same way I had my other LCD, so I remixed a mounting adapter from ADIMLab Center Mount LCD Case for Newer Machines by Electroskippy. The…
Put together a mount for a pitft I had laying around with the help of couple of other amazing makers, thanks to danielvolz and mintonette Additionally to my files you MUST print: this printer mount…
This is a remix of Bigtreetech TFT43 V3.0 by BigFunkyMan as found on Thingiverse https://www.thingiverse.com/thing:4534012. This remix allows the case to be top mounted. To assemble screw and glue the mount adapter onto the case back. Use…
This is a model for a housing that fits the BigTreeTech Pi TFT43 v2 and mounts it to the aluminum extrusion found on Creality CR-series (and probably Ender series) 3D printers. Tested specifically on my Creality CR-10 Smart. Because of…
In the slicer you will need to clone and mirror the mount. For the screen enclosure I used https://www.printables.com/model/405160-voron-switchwire-btt-pi-tft43-screen-mount
No, I am not addicted to display boxes, I just needed another enclosure that will fit my VCore3 printer. using M3 heated inserts More brackets are comming.
this is designed for an ender conversion but should fit a normal switchwire too It’s a bit fiddly to put together. First you want to put the y idler part on because its screw is covered by the screen. Then the screws for the screen can be…
This cover works with bear frame and it accommodates Bigtreetech TFT 43. To make this more sturdy I designed for threaded heat inserts in the cover. for screen this size It didn't feel good to screw into the plastic. I can change it if…
Hi Peeps, This is my design for a mount for my Ender 3 that holds my RPI 3b+ and a BTT TFT43 v2 display on it. Any RPI should fit as it is placed in the rear im not sure about the display though. The most recent iteration is v4 because of…
First of all, I made this last year and I honestly can't find where I got the original pieces for this - one model was for the case and bezel snap on faceplate, and the other model is of course the Voron supplied front skirt panels, which…
I needed a BIGTREETECH TFT43 mount for a TronXY X5SA Pro 3D printer. I like how the Pi case goes together without any hardware on the original and modded it to include a 2020 extrusion mount (should work in any size extrusion). The TFT43…
A mount for BTT PiTFT43 v2.1 on Micron. Will likely work for other 1515 machines. Display mounts to displaymount with 2.5mmx12mm screws. Displaycover slips over display and snaps into place. Slot in cover provides clearance for cable.…
Front Tall Skirt to use with BTT PI TFT43 Mount
