Counting matching models…
This is a slight remix of the remix done by Mike_111723; original modular card wallet by CHKING. What I changed: Edited the Middle Section to be 3mm thinner, now only measures 3mm vs 6mm. Added key ring to the Middle Section. Edited the…
I modeled this ghost from scratch using the original planter as a reference. The thinner walled models lower print time dramatically! Made the eyes a bit shallower to minimize the overhang. Included a solid model for vase mode prints!…
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…
This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…
Prusa Balance Game is great and the Prusa Balance Game Box is a great way to pack it. However, the Prusa Balance Game Box requires quite a lot of material. I have slightly adjusted the model by making the walls of the box thinner near the…
The Milwaukee Cordless ratchet is a great tool but the knob to change directions is recessed and hard to turn. It's doable with bare fingers but difficult with gloves on. This knob makes it very easy and if it gets in the way its easy to…
The inset was a bit too deep for the command strips I had on hand so I sliced off a mm or two from the back. Works fine, printed with .6 nozzle and 30 layer height.
Remixed thinner version from Cat cookie cutters 6 pack by Valroy https://www.thingiverse.com/thing:3962320 Category: Kitchen & Dining
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 100% Filament brand: sunluu Filament color: dosent matter Filament material: pla+ Notes: Print with 85mm/s speed, 215º extrusor…
This is a remix of the same connect styles, but with 1mm widths so that there's less of a gap between the filters
This → https://www.printables.com/de/model/666244-prusa-balance-game-box-stand good model of a box for the balance game unfortunately did not fit on my printer I have reduced the wall thickness slightly and rounded the corners so that…
Printable without supports.
A little holder I designed for Tamiya thinner or airbrush cleaner bottles. Can be easily printed without supports. Grips in to the indent on the sides of the bottle. Simple, but very convenient :)
No support required. Kept the rest intact for strength and adhesion. Printed the first 3 layers in red and the rest in black with a manual layer change. Can also black out the top part with a sharpie if you don't like the whole top layer…
Found this neat model by BreakfastDeluxe , but I wanted something simple and thinner so I can throw it in my caliper case. All credit stil goes to him, just performed a little z cut on his name at the bottom :p
Ratrig Wire Guide with a thinner base and closed mounting holes. I installed this in my V0 with VHB tape. I made a normal version and a taller one.
Update Feb 2026 : Multiple diameters of spindle have been added. All new models have the V2 prefix. New spindles are not compatible with the old V1 base and bolt. Details: This is a smaller yarn winder spool for a generic Amazon yarn…
Brandon made a really nice tweak that made this fit better, but I really liked the filament notch from the original design here . This modified version just takes Brandon's version and adds that notch so that it's easier to use with…
This is a slightly modified version of the bottom reinforcement to have a tighter fit with thinner plastic. The original bottom reinforcement was too loose on the thinner plastic sheets I'm using:…
EDIT 2024-09-09 Increased the bottom layer so camera island is more protected Added another pattern cut out
Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film The…
Jonas original model is genius, But on the acrylic thinner bottle it was a bit tight and the clips did not seat properly, because on the side, the bottle has a raised design. I made this model from scratch using his idea. I shortened the…
I found it worked better when it was thinner, so I havled its height
I absolutely love Kytor's chute, it works perfectly. It unfortunately wound up being just millimeters too large for the area I have my X1C in. I shrunk the bottom area and opened it up for easy poop retrieval. Thank you Kytor!
This is a very lightly modified version of J White's excellent fan guard (which is a remix of Der Peiner's). For whatever reason, I did not have enough room on my printer for their model. The printer was detecting crashes and too short of…
I took off 2mm from the original mounting bracket by EvilProphet. One of my racks was off by 4mm and wouldn't fit. With the bracket having 2mm less width it provided enough room for me to slide in my rack. Hopefully this helps someone else.
to be attacher with 3M VHB 5952 1" double sided tape
This is a Remix of my USB cable organizer meant to be wall mounted. This version is designed for thinner USB cables, with holes that are 4mm wide (the original model has 5mm holes). Similar to the original models, this one also has…
I used these to replace the thick windows on Walthers Vulcan Mfg. Category: Hobby
I wanted the same great idea by Jonas but for the Mr Hobby 400 ml bottles of thinner.
I wanted a thinner drybox to store filament in when not being used and didn't need holes or rollers for the bearing. Much simpler build AND Uses about 70% of the filament as the original drybox!!! Update 3/10/23 - I got tired of fighting…
Print at 0.2mm layer height, 5% infill, two walls.
0.5mm thiner Version of the Drop Stop for your Oral B Toothbrush Keeps your Toothbrush Charger clean All photos uploaded are of the actual printed model , and are copyright protected If you like this model please consider to buy me a coffee
i saw and wanted to print this decoration but i saw how the file was really thick and i didnt want a long print time that wasted filament so i made this remix to thin it down.
This is a basic remix of the wonderful Tiny Epic Galaxies board game player mat overlay by Sherri making the back piece thinner to better fit the whole set within the original game box along with some other printed organizers. I removed…
I modified the clamp for much slimmer desks up to around 30mm thick. Can now be printed on the Prusa Mini!
Thinner walls from the original. I can adjust the model to include different container configurations, let me know.
I really liked Whity's Rugged Box model but felt that the inserts are a bit too thick. I decided to remix them with 0.8mm wall thickness (so 2 walls on a standard 0.4mm nozzle) to save some plastic and cut down on printing time. The…
Remix of https://www.printables.com/it/model/449462-stickman-bookend
I did a poor job printing the original and wanted to have another go at it since my overhangs came out really bad (printing way too fast). With this reprint, I wanted to optimize the wall depth a bit and make it fit on my counter better.…
Remixed Hogwarts Express platform 9¾ coaster. Total 4.4mm height and 100mm diameter. Lettering height is goes up to 2.0mm, so color change occurs after if multicolor. Enable ironing for better surface results. Pictured coaster was printed…
I thought the original design was too thick and damages the pages of the books. This is only 0.8mm, instead of 1.5mm original, which is much more friendly to paper pages.
I needed to tighten up the space a little to squeeze one more drawer into my space.
Thinner version of https://www.printables.com/model/829340-anbernic-rg35xxh-bumper-case with cutout in the back.
No supports needed
use M3 heat inserts to mount the ebb
I found that both the 0.8mm and 0.6mm variants of @8BitDrip_2287972 's RG35XXSP Membrane Inserts were too thick, so I used Blender to make an even thinner 0.4mm variant. I find this thinner variant works very well in my RG35XXSP and feels…
Cactus remix of Artmonso @Artmonso_322348 's model. Same cactus but thinner, and with a flat base. Save around 10% of material.
An easier way to control the altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel, compared to the last remixes. Print the same as the other parts of your Hadley. You will have to…
I was looking around for a Pumpkin lantern to print for Halloween and really liked UserS' one, but I had to split it into two separate models so it would fit into my 220mm square print area. While I had the model in Tinkercad I decided to…
Reduced sprocket, in addition, a suitably adapted pocket. 3.3mm holes prepared for inserts M3
White in flexible PLA, yellow in hard PLA. Customized version of http://www.thingiverse.com/thing:290279 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=290279 Print Settings Resolution: 0.2 Infill: 100%…
Remix of Cardinal Wind Spinner Toy with Thinner Wings - Spins Better in Light Winds For Me (with some wd40 added to shaft as well!). I printed a pair of each of the thinner wings / mirrored thinner wings. The wings still have thicker part…
I made the headband about 10mm thinner to save time and materials printing. I included an attempt at a stack of 4 on them that I have not had the chance to test yet. Please let me know how it goes! The latest models needs to be scaled…
Remix of Nathan Benjamin's excellent box - just without the cover
I really like the original design but it was too big for my cubicle divider walls. My version is identical to the original in all respects except it's about 3/8" shorter. Printed as per original instructions: Print Instructions: Supports…
All credit goes to Guillaume Gendron who posted this original version. https://www.printables.com/prints/97432-netgear-gs305-switch-under-desk-mount I just lazily clipped out 5mm worth of depth out of the base plate and shortened the…
Thinner - 1996 3D printable model. Prints in 2 parts. The figure and the sign. Size to your needs.
Thinner designed for other spool sizes - changed diameter and length Remix of: https://www.printables.com/de/model/158734-ender-3-s1-secondary-spool-holder/files I got some more unusual spool sized which couldnt fit onto the orignal spool…
This is a slightly thinner (more flexible) and importantly less deep version of Peter Main's Nextruder Nozzle Holder / Extruder Identification Labels. I found that Peter's original design could interfere with other tool heads passing…
This is a remix of the design from Weshape. I removed 6mm from the back side to place the speaker closer to the wall. It works just as well with the 2nd set of interlocking tabs removed but makes it shallower to the wall. Printed up with…
These are slightly modified brake racks for the Asare Pendular Rudders. These are thinner on the sides to make them fit in their housing.
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
I searched for an end cap for 2020 aluminium extrusions. There are several out there. The original part offered the best fit, but it stood out too much. So I reduced the thickness. I also created a version with just three legs, which…
This is a modified version of the Ikea Cart Table Top Storage Clip RÅSKOG of Ender Ending Rodríguez for smaller tables / plates. It is modified to fit tables with thickness 12,5mm in the middle and 7mm on the outside. The radius for the…
Wanted to resize the Planter 02 and made its walls thinner, had to fix some references in the features for that.
I tried to print the rolling wheels upgrade but the axles didn't fit too well for me so I resized them and then designed some JDM wheels for the KEI TRUCK model to go with them. Please consider rating the print and posting a picture of…
I took Doug Joseph's Mini-ish lid v2 dimensions and married them with LivingTheDream's Lid with 4 MX button mount plate . The screw holes have been extended by the same length that was removed so that you can still use the Voron Heat…
This is a gridfinity holder for a 16ft Craftsman tape measure. I remixed it from the original model to have a bit more space on the inside by making the walls thinner. I found that the original was a bit too tight a fit, making it so that…
Thinned down the back part without sacrificing room in the coin stash. Mostly achieved by halving the thickness of the wall between the credit cards and the cash storage. The entire back of the wallet is now 0.8mm thinner and the cash…
Thinner by 1mm overall to clear carriage and narrowed to fit MGN9 rails. Print standing up from bottom, I used 5 walls and 30% gyroid infill.
The print settings for this are the same as the ones for the original, go there to read the instructions, I am gonna be lazy and not retype all that again. So lazy in fact that I am not even gonna copy and paste, too much effort.…
Print both sides and 4 connectors. Glue together and screw onto youre OW. Works wonderfuly. Print in PC, PCCF or some other robust material.
The .3mf contains the print profile for the bambu slicer where I modified the bottom like how you see it in the pictures. You could also just remove top and bottom layer for the first 6mm of the print an use like 10 walls for that part.…
I loved the design but it was too big to go over our bar countertop. So I sketched it up again in onshape using the measurements from the original and made the opening narrower to accommodate a 30mm thick countertop. I've also included…
I thinned and narrowed the original design.
This Budwin's mesh but shrunk down so it is easier and quicker to print as well as it being more flexible
Basically the same, but slimmer. REMOVED THE MICRO USB PORT BE AWARE
This is a computer stand. It prints without supports, provided your printer is fast (250mm/s or more). I created this model because my computer was pulling in too much dust as it used to be on the floor. I'm using it with my Lenovo E73 MT…
I just wanted a thinner more flexible version of this great model
The clips from the original were too large for my small "cupcake" spools (sold with that name in NZ) Fits spools with thinner walls. It also has a shorter reach into the inside of the spool. This is intended to work with adapter rings in…
Spout for cans of G Bond Thinner. ***Note: Inner circle has a diameter of 46.6mm. You may need to scale or sand the inside ring to fit*** Initial design by @n_h_molding on twitter 五月うさぎ・×・特殊造形屋さん Designed this model for EVA foam board. I…
Suggest to print with higher infill percentage and stronger material as the tall part breaks easily while inserting.
A turbo logo for the Toyota Tacoma 4th gen. Not sure how best to attach it, I will leave that up to you. If you have a good ideer let me know. The letters are 30mm font. The attached file has little attachments to hold the letters…
Hair Sieve for Kessel Linearis Shower Channel Replacement for: https://www.amazon.de/LUX-ELEMENTS-TUB-LINE-LTUBE1114
Not recommended to use - Thumper Blocks' filament path proven to be extremely fragile and it breaks during installation of the ECAS fitting, and same goes for this remix. This is a (work-in-progress) modified version of a Thinner Thumper…
This is a modified version of the airbrush holder published by Perec who was nice to share the model in an editable file format. This remix fits better, easier to print (no support required) and looks a bit nicer.
support pour bouteille type thinner, sous couche , diluant de chez greenstuff et AK fixation par vis a bois un pot est fourni avec afin de faire un rangement pour pinceaux, stylo , feutre , limes etc etc
TAMIYA - stack container for 2x 250ml Lacquer Thinner compatible with: TAMIYA - stack container for 6x 23ml color glasses von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
I was experiencing some issues getting my yeethammer to catch when priming, it seemed that the plunger rod wouldnt move far enough back. So, I modified the original catch to be slightly thinner where the plunger rod catches so that it…
You'll need 10 m3 screws and 10 m3 square nuts to assemble the base.
I love the zoo lion for backpacks or anything to show your love for the zoo! You can print it with words in black so they stand out or just one color and that totally works too! I have traced the letters with a thin sharpie and that works…
This model can be glued into the V3 - Thinner - With Removal Tab, Nextruder Clamp - No Sock model made by @IBNobody to fill in the sock gap. I realized I wanted the Nextruder Clamp - No Sock version, after printing the Nextruder Clamp -…
Made the letters thinner to print separately and then glue them together
Better looks for Pommel Insert's which were too thick
In the photo, the original is on the left (holds 4 decorative bits) and the remix is on the right (holds 6 straight bits)
This this version of the original S hook was made on MK4s with MMU3 with PLA and 15% infill. I did not need strength or have to worry about the elements ( eg. heat, sun, etc) since this was being used inside.
SSD Stacker Remix, for Futro S9xx thinner, wider hole.
This is to infill a larger clamp to a smaller pole on a handlebar for a bike. HIGHLY recommend to print in TPU so that it can bend. If you do not have TPU then you can print in hard plastic but you will want to cut it in half and then…
![[Thinner] - Phone case for Samsung Galaxy A52/A52s](https://media.printables.com/media/prints/869183/images/6671360_41c19fc5-af1e-4afa-973d-462fdf90ad77_43514812-a56b-457b-a9fa-a4d983e920a1/img_20240505_152019655.jpg)
![[OUTDATED] Thinner Thumper Blocks Filament Path with Pre-Gate Sensor](https://media.printables.com/media/prints/1082603/images/8184563_d816ca10-c381-4f2c-a77a-bc6371840d21_badd9114-afdd-4955-80e4-87e27dfd5964/preview.png)
