Counting matching models…
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
inspired by SCUF Thumbstick grips and designed to fit controllers for Xbox One, Xbox Series, Playstation 5, and Nintendo Switch Pro Controller (not joycons) No glue is required, but it is recommended Print cap in TPU Support only for…
For the Gamesir Cyclone 2 controller. This thumbstick is taller than the original. Designed to be printable without supports. Suggest using PETG
Looks kinda wonky, i know! But trust me, it works. Add tension to the thumbstick and give it some height at the same time, all without limiting the movement of the stick (as the "precision rings" do). It also reduces the feeling of the…
I had a hard time finding thumbstick caps for my Legion Go, so I decided to design some replacement sticks instead. I’ve included two sizes: one is similar to the Xbox Series controller thumbsticks (so you can use standard third-party…
The Game Plate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate is designed to mount the Evil Controllers XAC & Playstation Access™ controller Mini Thumbstick 3.5mm , allowing the DriveKeys platform to function…
This is an analog stick cover for the Playstation Vita portable console. Simply print with Ninjaflex at 75% infill and coat with rubber paint for a PS4-Like experience.
This is a hollowed-out version of the 8BitDo SN30 Pro thumbstick "cap" originally made by facelesstech. The intention of it is to replace a broken or missing rubber cap on the thumbstick for that or any other compatible controller. I…
A simple thumbstick topper system to allow you to add different extensions to controllers. Each base has two halves, which slide on the thumbstick and are held together by the topper as it is screwed on top. Tested and designed for the…
Dome hats to Xbox One controller thumbsticks. Very tight fit. EDIT: 2nd iteration added. For some techno-magical reason Microsoft decided to include only one domed thumbstick in Elite 2 controller and the thumbstics from previous Elite…
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
I was tired of my Odin 2 Mini's right thumbstick getting in the way when I'd go to press Start or Select. It got to the point where I'd pull the right stick off if I was playing a game that didn't use it. I'd printed out these sticks…
WARNING: More for novelty. The base of these is the MS Accessibility base, which is designed to go on, and not really come off, and may damage older thumb sticks on removal. I may make a design that replaces the entire thumb stick cap in…
Two part thumbstick extender for game controllers
you are going to need a 3x8mm neodymium magnet to place it inside the pocket of thumb stick, i have only tested it on resin 3d printer, should work fine with fdm to
This series of models hope to offer a variety of “swap-to-suite” PS4 thumbstick adaptors for adaptive play. *Will likely be adding more/refining models. Open to suggestions, as each persons style of play may vary. - - - Pinwheel - Basic…
Orignal thumstick made lose and it's dificult to buy new one. I made adapter to install XBOX (xbox one replacement part) thumbstick. Xbox one thumbstick have very similar mesurments to Nyxi orignal one. I used PLA because it's hard and I…
If you need to raise the contact point on your 8BitDo Ultimate 2C thumbstick (or any similar controller with a 17 mm thumbstick diameter), you can print a custom TPU part to enhance grip and smoothness. To ensure success: Material Prep:…
DJI RC Motion 3 Thumbstick / Joystick replacement because DJI seem to refuse to replace such a simple part. Installation: A simple press fit with a small dab of superglue just before you press the thumbstick in, just as the factory…
I lost one of the thumbsticks and could not find info online about wich thumbsticks are compatible, so I made this and an Xbox one version. Printed using supports and put thumbgrips on top.
Same thing as GC Attachment but smaller for the classic controller.
updated after testing but I no longer work for them so I can't access the original to update find the other parts here: https://www.printables.com/model/989346-xbox-thumbstick-extension-system-accessibility
If your PS5 DualSense thumbstick cover is worn or torn, this replacement cap is an easy solution. It snaps securely onto the existing knob, restoring the functionality and feel without replacing the entire thumbstick. Print Details: Layer…
A thumbstick extender for the Playstation Vita Filament: TPU 95A
I have this gamepad for ages and love it. When thumbsticks worn out, I could not find replacement and tried to model one. At first it had too much friction so i adjusted according to Ender v3 SE. I think it can work with f710 and f510 but…
This is a holder for your Xbox controller that mounts to the underside of your desk using double-sided tape (I used 3M tape.) The controller joysticks slide in to hold it in place. Works with KontrolFreek thumbsticks. I used: 0.4mm layer…
The Retroid Pocket 5 is an awesome retro handheld but I broke both thumb-sticks when traveling with the handheld in my sling. I tried printing the Odin 2/Retroid Pocket 5 Thumb Sticks but was not happy with the fit. I printed these…
Print it with precision settings with layer height as small as possible. My print: Layer height: 0,10mm Infill: 100% Supports/brim: no
XTB09X @XTB09X_395758 is the creator of the XBOX accuracy thumbsticks to the best of my knowledge. it ended up being 6.62 mm taller than the original.
PLA is great for this despite being brittle and not as flexible as PETG. Try the original size (100%) and if its too loose, print it in 2% increments (102%, 104%, etc..) or vice versa for too tight. It should be able to pop just right…
i couldnt find one thats good so i just mixed two models psp analog stick/joy stick or whatever you call it just like the original so if u want a replica download this print it vertically Category: Video Games
This is a replacement part for the rubber that wears off the thumb sticks. This REPLACES the original rubber. I have had my XBOX one controller long enough that my thumbs have warn through the controller and it fell off completely. The…
Upgrade your R36S controller with this 3D-printed thumbstick extender, designed to enhance precision and control in your favorite games. Whether you're aiming for headshots in FPS titles or fine-tuning movements in retro classics, this…
Suggested to print with low infill and light weight material as the springs may not be strong enough for the joystick to center on the standard Xbox controller once a topper is screwed on.
Alpakka Controller project: InputLabs.io . Original design: github.com/inputlabs/alpakka_case by Input Labs. This is a modification of Alpakka Controller v1.0 right thumbstick hat which replaces round cap with a square one. The intention…
The existing Odin 2 thumbstick models didn't seem to fit nicely on the stalks on the Portal so I redesigned a new set with a slightly tighter push fit. The main pad will accommodate PS5 thumb grips nicely (see photos) and if you print in…
inspired by SCUF Thumbstick grips and designed to fit controllers for Xbox One, Xbox Series, Playstation 5, and Nintendo Switch Pro Controller (not joycons) No glue is required, but it is recommended Print cap in TPU Support only for…
replacement for my stick that broke (2nd photo) that also work on thrustmaster thumbstick (3rd photo) printed with an ender3v3 plus on 0.2mm 4x4x4wall 15% infill (a little tight first but work great after)
This is a small spacer that allows you to adapt the Xbox One controller thumbsticks to older xbox controllers including the xbox 360 controller, the OG xbox S controller and even the Duke controller without restricting functionality (full…
Had some problems with the thumb-sticks available on thingiverse, a lot of them are not quite easy to print or are just to slippy for my fingers. So I designed my own ones. Fits on the Frsky taranis and other radios with M3 treaded sicks.…
The model was made to be easy to print and take a small amount of filament, but they turned out more comfy than I would expect. Meant to be printed on the flat side, and the corners are all 45 degrees so no real over hands. The pictures…
Stick cap will fit any m4 threaded control stick. Tolerance is tight, I recommend running an m4 bolt through it to cut the threads before installing on your transmitter to reduce extra torque on the controls. This required a new set of…
Simple Buttons & Thumbsticks for foam sculptures (this is mainly for my school but feel free to 3d print it if you want I dont mind)
This thumbstick saver/protector holds the SteamDeck LCD thumbsticks in place while placed in a bag etc. It snaps on using 6x3mm magnets. It prints in place and has a hinge built in. All you need to do is add the magnets. I used superglue…
The versions I could find online were overcomplicated or plain uncomfortable to use. This is a replacement for a worn thumbstick surface - you will have to peel the old rubber off or it will not fit. Print in flexible filament. Layer…
This model is a replacement part for the 8BitDo SN30Pro controller. Some structures were reinforced and the hole for fitting the axis was slightly enlarged for better compatibility in relation to the original part and other replica models…
Fast-printing replacement part for worn out Joy-Con thumbstick silicone top cap. Based on the original design, but slightly bigger (17mm diameter vs 15mm of the original). Version with grooves for a bit more grip can be found here . Must…
Fast-printing replacement part for worn out Joy-Con thumbstick silicone top cap. Based on the original design, but slightly bigger (17mm diameter vs 15mm of the original) and added grooves for better grip. Smooth version can be found here…
these are stick grips to enhance your control of the switch. there are 2 designs, one with max grip and one with a smiley face. this model is also on my cults 3d account, @jebronlames
these are a simple alternative for the uncomfortable original thumbsticks for the hubsan line of controllers. It saved not laying flat so you will have to make sure its sitting flat to print.. Category: R/C Vehicles
I wanted some short thumbsticks for the Radiomaster Pocket, so I designed these, which are similar to the original thumbsticks but shorter, while still fitting into the original stick storage in the transmitter. Printer settings 0.4…
Tired of those loose Nintendo 64 thumbsticks? You get your thumb injured every time you try to play some good old classic games? Here you have the final solution! Using this 3d printed grip your controllers will work like they were new!…
For the Gamesir Cyclone 2 controller. This thumbstick is taller than the original. Designed to be printable without supports. Suggest using PETG
Looks kinda wonky, i know! But trust me, it works. Add tension to the thumbstick and give it some height at the same time, all without limiting the movement of the stick (as the "precision rings" do). It also reduces the feeling of the…
These are replacement joysticks for xbox 360 controllers. The design is suited for 3D printers and not identical to the original. I have experimented with a few different designs trying to find the more grippy design that is easily…
I had a hard time finding thumbstick caps for my Legion Go, so I decided to design some replacement sticks instead. I’ve included two sizes: one is similar to the Xbox Series controller thumbsticks (so you can use standard third-party…
Thumbstick for Retroid Pocket. I made it for my RP2, but I think it would also work for other consoles, as it's a standard type of joystick. I added rubberized cover for better grip, it's easy to find online. You can print without…
The Game Plate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate is designed to mount the Evil Controllers XAC & Playstation Access™ controller Mini Thumbstick 3.5mm , allowing the DriveKeys platform to function…
To add fine tuning to my drone i came to the conclusion that merely elongating my thumb sticks i could achieve this with minimal work required. Its designed around a Ø15mm thumb stick with a 12mm radii. I assume this will fit any micro…
Print Notes PLA tested Best result: ~45° tilt, thumb surface facing down Supports recommended (improves concave surface feel) No-support print is possible but rougher Fit / Use Designed for press fit (mention if tight/loose after you…
Here are my custom thumbstick caps designed for pure thumb grip on gamepad-style FPV controller. Base printed in PETG, top in TPU 95. M2 (2mm) threading. The .STEP file is included so you can modify the thread or dimensions if needed for…
This is an analog stick cover for the Playstation Vita portable console. Simply print with Ninjaflex at 75% infill and coat with rubber paint for a PS4-Like experience.
This is a hollowed-out version of the 8BitDo SN30 Pro thumbstick "cap" originally made by facelesstech. The intention of it is to replace a broken or missing rubber cap on the thumbstick for that or any other compatible controller. I…
This model is meant to be printed in flexible materials. I was able to test and verify with basic overture TPU (assuming 95a but the spool does not specify) Verified working on the following controllers: Dualsense Switch Pro Controller…
My SF30 Pro thumbstick wore out so i decided to draw up a new one. There are two versions: flat and concave. To make up for the material not having much grip i included a bumpy texture to the stick. I find the concave version works…
I got tired of my old worn out rubber thumb pads on my PS4 controller. These were made to be as close as possible in height to the OEM thumb sticks while being designed for printability. Designed to be printed at .16 layer height with…
Here are several thumb sticks compatible with generic controllers using a metal stem analog. The 12 files available are identified as: V1 - Cross shape V2 - Round shape (easier to print) STD - Analog stem profile dimensions 2mm X 1.1mm…
🎮 PS5 Thumbstick Attachments – 3 Styles Give your PS5 DualSense controller a fresh feel with this set of 3 different thumbstick attachments . Each design offers a different grip and profile, so you can find the one that feels right for…
Replacement Thumbstick made for the Logitech Wingman. Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: Doesn't Matter Supports: No Category: Video Games
A replacement grip for an official Xbox One controller thumbsticks. Please note that this is the grip only, it does not replace the whole thumbstick assembly. I printed this in Varioshore TPU at 220C.
I love playing shooters with stick extenders — the extra height gives noticeably better precision. But existing caps that fit the SC2 have two problems: they kill the capacitive touch function of the sticks (which matters a lot on this…
I was looking for a replacement analog stick for one of my 360 controllers but none of the ones I found had a shape close enough to the original, so I decided to make my own. While it looks accurate enough for my taste, I didn't take…
These should print nice and quick with some good surface detail to help grip. Category: Video Games
Inspired by console gaming controllers, this knob is more comfortable while retaining grippyness.
After some particularily heavy gaming I noticed the stock rubber cover on my left thumbstick was coming off, so I designed an FDM friendly-ish replacement that snaps on to the thumbstick base, I included some sacrificial supports but…
Designed for the MCH 2022 badge using Fusion 360. If you want one printed at the camp, call 9100 on DECT or come to village ACKspace on Torvalds field (might not always be there/reachable).
Thumbsticks for Hubsan H107D Transmitter Print Settings Rafts: Doesn't Matter Supports: Yes Infill: 100% Notes: Print sideways for strength Category: R/C Vehicles
A simple mod for the Razer Tartarus keypad that provides a raised edge around the edges of the thumbpad for better grip.
My dog ate the right thumbstick to my Hori Split Pad Pro. I couldn't find an existing model so I spent some time measuring and modeling to create a replacement part. This took several iterations to dial in the measurements and fix any…
Takes a 8x3mm neodymium magnet in the top of the thumbpad (I just had some laying around, but these should work: https://a.co/d/iS8znQm). Split into 2 parts so you can print without supports (note: the collar should be printed with the…
My 4 year old decided to rip off the stock thumbstick pads on my XBox One controller. I bought some aftermarket ones that didn't fit snug enough, and he did it again, losing them. So I made this and printed a dozen of them. I used…
After installing the Spigen Rugged Armor Protective Case onto my SteamDeck, I noticed the deck sits a bit higher up while in the case and the thumbsticks could be pressed while the case was closed. I designed these cover caps that fit…
Made some thumbsticks to replace my worn out xbox thumbsticks i had on my ps4 controller. I personally love the way these feel. They provide great grip, and feel light seeing as they are made of pla. I printed these with 100% infill with…
High accuracy thumb sticks improve game performance by 10% when playing various games
I made this modular replacement thumbstick for an Xbox One controller, so you can tweak the ends of the sticks to your liking. The model can be printed quickly with any 3D printer. printer: Longer LK4 PRO material: PLA internal density:…
replacement thumbstick grip for xbox 360 controller Category: Toy & Game Accessories
Like the original creator of this idea... I was tired of the lack of an analog stick for movement on my Razer Blackwidow V3 mini. unfortunately, I was not able to easily find the joystick used in the original design, so I redesigned mine…
You could print or buy a full replacement cap, but I quite like the feel of the original. Also, I only wanted the right stick to be longer (for better camera control) but still wanted my sticks to match. This was a serious pain in the…
DESIGN INTENTS Replacing thumbsticks that are damaged on PS4 controllers Design for 3D printing (and not a blind replica of the original) Overhangs and bridges have been adjusted to work on any calibrated 3D printer Stick is a little bit…
This is a remix of thumbsticks for PS4. My son needed them to play Fortnite, and they seem to work well for him. The top parts of the thumbsticks are remixed from PS4 Thumbstick Mods by philbarrenger . Top parts have to be printed with…
STEP files included to change the inner diameter according to your needs.
Extremely simple grippers/protectors for Xbox controllers. Works on Xbox One and series x controllers. Haven't tested with PS controllers so can't guarantee the fitment. Print in TPU or similar flex filament. Print smoot or with fuzzy…
These stick ends try to give you the gamepad thumb stick feeling as you know it from your Playstation or other console, while flying your quad. I found this model on Thingiverse but recreated it from scratch to optimize the printability.…
Please note first! You need to print this using a very sturdy plastic such as Prusament PC-Blend or use a resin printer. I tried PETG and it was not strong enough. The settings I used. Please flip the model and print top down, those…
Riser for the joystick to have more leverage and length of movement increasing the aim in FPS (shooter) games It's better to increase the sensibility in your game after fitting the thumbstick I printed it with a mix of PLA and TPU for the…
replacement for the rubber top of joy-con thumbsticks. based on the shape of Xbox sticks. Must be printed in TPU or other flexible material. I could probably make a version that needed glued on or tight tolerances to allow other materials…
![8bitdo thumbstick extension TPU [2 versions] STEP](https://media.printables.com/media/prints/1104250/images/8345672_fb4e62a2-4d74-452a-a73c-44d03caa468b_24cc618e-a721-47a2-a594-7fe8d4fba634/photo_2024-12-10_07-06-23.jpg)
