368 models
Bahtinov Mask for for the Hadley telescope. If you are unfamiliar with masks, they can help you focus the telescope more easily on stars. This is designed to fit over the web. Warning: This part is experimental. I have not been able to…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
The Bathimov mask used to focus a lens on a star for astrophotography. How to use Place the mask in front of the lens Point the camera at a bright star Adjust the focus until the central spike is in the center position Further reading and…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Questa è una maschera di Bahtinov ideata per il mio obiettivo nikon 50mm f/1.8. Utilissima per mettere a fuoco le stelle utilizzando il live view. E' stata stampata in PETG, consiglio di usare il nero.
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for PETGSource material: PET
Status: V1 does not work very well, V2 works better but is a flange type. The lines are quite small, printer precision will be beneficial and a nozzle smaller than 0.4mm would likely help, untested. V1 ID: 48.5mm Print flat side down, any…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant
tri Bahtinov mask is used to more precise focusing and adjusting of optics inside telescope. Instead of ordinary Bahtinov mask there are 3 directions of focusing V pattern, so collimation errors can be seen and fixed too. diameter 100 mm
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
I created this Tri-Bahtinov Mask for my Celestron EdgeHD using the following site https://satakagi.github.io/tribahtinovWebApps/Tri-Bahtinov_symmetric.html, created by Satoru Takagi. Focal length: 2000mm Outer diameter: 209mm (so it fits…
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
Each time I remove the skirt of a 3D print, I am amazed by the “wire bending” capabilities of a 3D printer: after removal, the skirt wire stays in its printed shape and is remarkably strong. I always wonder why I haven't seen any designs…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This masks prints well on a Prusa MK3S. I don't recommend making the slits less than 0.5mm wide, as they might fail to print. The Fusion File is parametric, so it should be easily adaptable to a different aperture size.
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
Detachable Bahtinov mask for Meade SN 10 inches (F 1016mm, BF200). The mask is designed for a focal length of 1016 mm with a Bahtinov factor of 200. It works well with a telescope inner diameter of 297mm, where it adjusts and self-centers…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Bahtinov pro TSAPO130Q
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for PETGSource material: PET
Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Right in the middle of astro photo season I got my printer so I could do this astro focusing aid mask for my super tele lens. Should make focusing on the sky elements a breeze. Made it fit the built-in small lens hood. Inner diameter of…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Valentinosaurus: the evolutionary descendant of Ringosaurus . After millions of layers, the Valentinosaurus evolved to be stronger, smoother and stickier - improving its prehistoric protection of your jewellery Jurasically. With a wider…
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…
In order for the Bahtinov masks to work properly a certain focal length needs to be exeeded. The minimum focal length stands in the modelname (min750mmFL), you can still use the mask with a lower focal length, but I wouldn´t go to far…
For manual focus on bright stars and objects, just align the crosshairs.
Meet "Valentino the Rat" - Your Easy and Adorable 3D Print! Let me introduce you to a new friend - Valentino the Rat! With his heart in hand Valentino is the perfect way to spread love, especially on Valentine's Day! Imagine gifting…
Tri-Bahtinov masks help to achieve a very precise collimation and focus on telescopes. I have designed this mask to fit on Celestron C8 and EDGE HD SCTs. General information about Tri-Bahtinov masks can be found here:…
Summary of Concept This is a 3D printable Bahtinov Mask to assist with manually focusing on the night sky. Bahtinov masks work by creating diffraction spikes from a point light source (like a star) spread out across different sections of…
Support on Patreon! https://www.patreon.com/PrintedEncounter
A telescope Bahtinov mask, to aid focusing for astrophotography. An STL that fits a Tasco 11TR telescope is provided, but you can download and modify the OpenSCAD source to fit your telescope. Also check out my other telescope stuff .
Summary This is a (almost) fully 3d-printable kit of rings to connect the Samyang/Rokinon 135mm f/2.0 lens onto a light and small star tracker (such as the Sky Watcher Star Adventurer) or an equatorial mount (such as the Sky Watcher EQ6).…
ZWO Seestar S50 Bahtinov Mask A simple focusing aid for when manually focusing the ZWO Seestar S50. New updated design with spring-loaded tangs around the periphery to help hold the mask in place.
A Gelatinous Cube draws near! 28mm scaled, so it will take up the standard 2x2 inch grid spacing a Large creature would. Both a standard version and a Dragon Quest slime variant are included, because why not? Edit: There was a request for…
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anderen Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. Im Anschluss wurde eine Öse zum Anhängen an den Schlüsselanhänger hinzugefügt.…
🇲🇽 ¡Bienvenidos a CDMX! Welcome to Mexico City! This model was designed by Dany Sánchez . At 188 meters (597 ft) tall and 44 stories, the Torre Latinoamericana ( Latinoamerican Tower ) was the first skyscraper to be successfully built on…
Be persistent like a mosquito, at the end you will get your bite! (Easy to print NO raft or support needed) Feel free to join my YouTube 'Channel if you want to see more of my cool projects or printer reviews https://bit.ly/2NonEXS Print…
This little hungry friend comes in two version: A pretty display base and a Mythic Mugs screw lid, which has threads that fit into any of our Mythic Mugs or dice boxes (for example the free Lion's Brew or Merchant Mug). The Gelatinous…
The is my version of an Bahtinov Mask (created with AstroJargon) for my Skywatcher Teleskop N 150/750 PDS Explorer BD OTA. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
A tri-bahtinov mask with hinges to be foldable and use less space. The Mask is designed for celestron C8 (and tested on a vintage one). I've created 3 versions: 1 for the C8 with the secondary mirror holder of 66mm of diameter (tested on…
Behold the Gelatinous Cube, the silent janitor of the dungeon world! This transparent terror glides through corridors, absorbing everything in its path with the grace of a particularly hungry vacuum cleaner. Don’t be fooled by its jiggly…
Using the same dimensions as the standard Skywatcher dustcap. The .stl is completely manifold and thus perfectly printable. tested settings with PETG: layer height: 0.3mm 2 perimeter shells infill: 20% no supports needed
Un regalo d'amore in un giorno importante Buona festa *** A gift of love on an important day Good party
the doctor valentino rossi 46
The model was created via https://skeye.rocks/tools/mask/ according to Seestar's specs, hence the lower slit pitch, so that it is easier to focus on objects. The model also fits perfectly in my Accessories Box for Seestar . You may need…
1:120 Scale model of a argentinosaurus, one of the largest sauropod species. The model features detailed scale and skin texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a…
Another Bahtinov mask to use for focusing my ZWO 30mm F4 guide scope. Could not find models to fit exactly and remixed one from thingiverse. Printed in Prusament PETG.
I created basic bahtinov mask for Dwarf 3. You'll need to get a magnet for it diameter of hole is 6mm, I was trying to find old purchase on amazon but they are no longer available so I can't provide link. I added a arrow for orientation…
Dardanelles Cannon was used by the Ottoman army to knock down the walls of Constantinople.
Bahtinov Mask for 8" Dobsonian Telescope OpenSCAD file turned .stl for my Dobsonian Fits my telescope; Bintel BT 202: Focal Length: 1200mm Aperture: 203mm Focal Ratio: f/5.9 If your looking for other Astro accessories for your Dobsonian…
It is very well fitted to the evoguide 50. not too loose not too tight, just right.
This a a Bahtinov mask and a holder for a 50mm Bigking Finderscope with a focal length of 190mm. Two masks are included, one is a bit more open. The outer diameter of the mask is 61mm and it might fit similar finderscopes from other…
Bahtinov Mask for Canon EF 75-300mm with ET-65B
This Bahtinov Mask is used for the Samyang 135mm F/2.0 lens.
Modelo 3d de Santa Sofia de constantinopla
This is a Bahtinov mask ( Wikipedia ) for Celestron NexStar 127SLT which makes it easier to focus the telescope for the clearest image. This is especially important for astrophotography. The face of this mask was created with this online…
A duo of armored terrors: a mighty horned beetle and a skull-clad variant. Ideal for horror-fantasy settings, miniatures, or collectible creature sculpts. This model is intended for resin printing, it is not pre-supported. A bonus is…
A model of a Cane Corso Italiano.
A Bahtinov mask add-on for my Nikon 200-500mm f5.6 diffraction spike generator meant to assist with achieving perfect focus in astrophotos. It uses the same mounting ring to attach to the front of the lens hood. Print in black filament to…
A adaption of https://www.thingiverse.com/thing:160391 Bahtinov Mask Generator by https://www.thingiverse.com/brentb I removed the handle (which will break) and replaced it with a ring around the center and set the defaults for a…
Simple to print Bahtinov mask für 8 Inch SC telescopes. Fits perfect on the Celestron EDGE HD Scope and has a middle guide ring for easier handling and optimal grip. I also added an .step file for better rounding performance when printing
Bahtinov Mask for William Optics UniGuide 32mm
A symmetric and rounded Tribahtinov mask for the Celestron 925 Edge HD. Based on the Satakagi Tribahtinov web calculator. Also included M3 knobs as a replacement for the original screws.…
“The Bahtinov mask is a device used to focus small astronomical telescopes accurately.” This thing is essentially used for astrophotography to get things in focus using diffraction. The short and sweet is that you stick this thing on the…
Bahtinov masks create diffraction patterns that can be used to quickly and precisely focus a lens. They are commonly used in astrophotography. The procedure is to put the Bahtinov mask in front of the lens, point the lens at a very small…
Bahtinov mask designed for either a telescope or a camera lens. The main difference between this and other masks I've found is that this one is designed to work on either a normal camera lens or a telescope. That means allowing a very…
A Bahtinov Mask for helping with focusing a Hadley telescope. === Update 2023/03/03 === Added a thin edges version that reduces overall thickness to 1.5mm and has angled edges to each slit, in the hopes of making a sharper diffraction…
Bahtinov mask that fits over standard 62mm camera lens filters. https://en.wikipedia.org/wiki/Bahtinov_mask 65mm inner diameter. Use scaling in your slicer to make it fit other sizes, or edit the F3D file. Prints in under 30 minutes.
Bahtinov mask for the Svbony 60/240mm guide scope. Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights. Print Settings Printer…
This mask is specifically for the Meade LX200 8''. It is slightly oversized in order to fit 3 pieces of felt. Printed easy and fits perfectly. Thanks to Brent Burton for the generator! Print Settings Printer Brand: Creality Printer:…
This is a cool model of the Google dinosaur, but a valentine edition this time! check my profile for other versions or click the links down below. FLEXI: https://www.printables.com/model/585171-google-flexi-dinosaur Normal:…
I modeled my own version of a standard Bahtinov focusing mask. The general profile for the structure was generated automatically using the following free online utility: http://astrojargon.net/maskgen.aspx (link broken, unfortunately) I…
A bahtinov mask for Samyang 14mm lens. Should fit quite snuggly on the lens. made with https://skeye.rocks/tools/mask/
Modified the size to fit the 130SLT. I'm new to telescopes, so not sure if you can just adjust the sizing on these or if there is some math that goes into the mask design spacing, but seems to work well on mine. Print Settings Printer…
I have a new guidescope, for which I created this tiny Bahtinov mask.
This lens cap with a Bhatinov Mask makes it easy for astrophotographers to manually focus on stars. The STL is designed to fit a Canon RF 100-500 telephoto lens, but the OpenSCAD file can be easily tailored to accommodate lenses with…
Print all parts flat on the build plate, then assemble as per the image. You can choose to use either the triangle or kite shaped pieces depending on your personal preference. Try different colors for different shapes!
This a remix of a great design by Xuis - I remixed it to be less bulky while providing just the right amount of friction/tension and allow it to be placed on the strap without cutting/removing it. 20 mm version, more coming soon
Specs: - outer diameter 145mm - inner diameter 50mm (I tried making a version with 50.5mm, it felt too loose) - 2mm thickness with 8mm “grip” in the center. Print settings: 0.2mm Quality, 100% infill, generic PLA. Printing time was around…
Customized version of https://www.thingiverse.com/thing:3968935 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3968935 Instructions Using the following options: focalLength = 420 aperture = 83 capDepth =…
This is a simple Bahtinov Mask that fits on the front barrel of a Nikon 70-200mm lens or any other lens that has an outer diameter of 88mm. Category: Camera
This mask fits the lens hood of the Nikkor Z 85mm f/1.8 S The fins are very small so maybe better to use a 0,2 nozzle. I have been able to print it succesfully with a 0,4 nozzle by reducing the line witdh in Cura.
Opening this model in Fusion 360 allows you to change the following parameters: TelescopeDiameter: Changes the diameter of the Bahtinov mask's opening. SpokeWidth: Changes the width of the spokes/spikes/frame of the mask. SpokeThickness:…
i needed a bahtinov mask for my camera lens, so i threw this together i designed this to go on easily over the lens like a cap, using only friction to stay on. the fit is secure and wont slide off
Faire attention en retirant les supports sur les parties fragiles. Avec sa grande crête blanche, ses yeux attendrissants et sa pose timide, ce dino ne passe pas inaperçu ! Il est inspiré d’un Parasaurolophus version cartoon, repensé pour…
Bahtinov mask designed to fit over the original, integrated lens hood on the Nikon AF-S Nikkor 300mm f/4. Tri-Bahtinov generated using the webapp generator from Satakagi . https://satakagi.github.io/tribahtinovWebApps/Bahtinov.html
This Bahtinov mask is used to help focus your lens on the stars precisely. I used a website called https://skeye.rocks/tools/mask/ to generate the mask STL and then added my mounting geometry. This mask uses the existing lens hood…
Valentino Rossi Klok 2d art
A standard bahtinov mask will help with focusing for astrophotography. A tri-bahtinov mask has the additional support for making sure the telescope is well collimated.
Il modello rappresenta una notifica di like fluorescente con un insenatura per poter inserire foto o lettere d'amore. Viene sorretto da una base con scritta in rilievo. Facile da montare. Necessita di colla.
A bajtinov mask for the skywatcher Evolux 62ED. Printed in Prusament PETG on MK4 using Prusament PETG profile / 4 walls.
Bahtinov Masks ( https://en.wikipedia.org/wiki/Bahtinov_mask ) are focus aids for dialing in a telescope for astronomy/astrophotography. I whipped up this one for my Celestron PowerSeeker 114 Telescope. There's a pretty good chance it…
Tri-Bahtinov masks help to achieve a very precise collimation and focus on telescopes. I have designed this mask to fit on Celestron C5 SCTs. Two version for f/10 and f/6.3 are available. General information about Tri-Bahtinov masks can…
Self designed clip on bahtinov mask for 200mm (8") Celestron RASA telescope. Printable in one piece with 45° or 225° rotation on Prusa i3 MK3S+. Combineable with cable tray with or without spikes (see my profile). settings: Pre-settings…
The Tri-Bahtinov mask was designed using this excellent tool: https://skeye.rocks/tools/mask/ The mask and dew shield are designed to be a snug pressure fit onto the lens cap flange by adding a couple strips of adhesive velvet as sold for…
Bhatinov filter for Celestron 8se. Prints in two pieces and snaps together. Print both pieces with supports. Print Settings Rafts: No Supports: Yes Resolution: 0.30 Infill: 25% Category: Sport & Outdoors
Bhatinov Filter for Celestron NexStar 6SE created using Bhatinov Mask Drawings Generator
Model is intended for Celestron C6-N telescope with 150mm aperture and 750mm focal length. You can use it for: Check of the telescope collimation and its adjustment. Check of the proper focus and its adjustment. Also, you can use it for…
Bahtinov mask for Nikon Nikkor AF-S 300mm f/2.8 IF-ED (first version produced from 1996 to 2001). It will probably fits also IF-ED v2, don't know about the VR1 and VR2. It fits the rubber ring without lens hood.
Bahtinov Mask for Canon EF 100-400mm on ET-83C
This mask fits neatly inside a NexStar 6 Evolution and is easy to remove. Focusing works like a charm with an astro camera, takes out the guess work of lucky imaging. I've created the shape on this site:…
A bahtinov mask for the EF-S 15-85mm f/3.5-5.6 lens.
I could not find a focus mask that worked with the celestron dew heater ring and hyperstar. This design elevates the mask so that the dew heater ring and the cables do not tilt the mask. Print it “face down”, I used PLA and 0.2mm leyer…
I made some accessories for the Celestron FirstScope 76/300mm tabletop dobsonian. This scope is sold under different names, so if yours looks like the FirstScope or has a 90mm dust cap ring it'll probably fit too. The primary reason for…
I made a 12" tri-bahtinov mask for my 12" meade. Works beautifully. I printed in glow in the dark filament. 25% infill 3 perimeters
Tri-Bahtinov Mask for C8 and Edge HD 8 Hyperstar with cooled ZWO/OGMA/Touptek 80mm diameter camera This Tri-bahtinov mask will fit C8 or Edge HD8 in the Hyperstar configuration with out having to remove the camera. outer diameter is 203mm…
It is a remix from this one: https://www.thingiverse.com/thing:7100587 This is an adapter for the Hyundai i30 (2013) to retrofit the Philips Ultinon Pro6000 Boost H7-LED. The ring form the LED needs to be detached, that fit this one over…
Here is a simple dew shield for the Dwarf Mini smart telescope from Dwarflab. This design doesn't block the wide angle camera completely so it's still usable. The internal diameter of the dew shield is 32mm and the length is 45mm. The…
Escudo de la asociacion del futbol argentino, para imprimir en varios colores, hay 2 ficheros, una tabla con las 3 estrellas y otra sin ellas para poder incorporarla a otros modelos.
