Counting matching models…
MakePro Stix MakePro Stix is a modular, 3D-printable LED tube system designed by the MakePro for event lighting, video production, home decor, and more. Each “stick” consists of two parts—a base housing with the control electronics and a…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This additional mount point for the Moen Engage Magnetix handheld showerhead was designed for those that sit on a shower bench and need a close place to hang the showerhead without standing to use the original mounting point or dropping…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Baby Groot .3mf Ready to Print by TIXEN FDM - with variable layer height and supports Sizes : 10 and 15 cm Please, Print it! Share it! and let me know about any suggestion or any issues Contact info: Email: [email protected] IG: @tixen.ar…
This is a REMIX from: https://www.prusaprinters.org/prints/7804-addams-family-thing .3mf Ready to Print by TIXEN FDM - with variable layer height and supports Sizes : 10, 15 and 20 cm Please, Print it! Share it! and let me know about any…
15.01.2022 update This is my version of iFlag display working with all popular simulation games like iRacing, AC, ACC, Dirt Rally, witch SimHub open source software! For this project you need additional Arduino Nano unweld board, piece of…
Homer Budha .3mf Ready to Print by TIXEN FDM - with variable layer height and supports Sizes : 10cm Please, Print it! Share it! and let me know about any suggestion or any issues Contact info: Email: [email protected] IG: @tixen.ar This…
This is a REMIX from: https://cults3d.com/en/3d-model/art/moai-statue-no-overhang made by JULIEN DACOSTA https://cults3d.com/en/users/Julien_DaCosta/creations .3mf Ready to Print by TIXEN FDM - with variable layer height No supports…
Remixed the design by ParabolicTech to work with the factory screws and added recesses for M4 hex nuts Print instructions Category: Parts Summary Remixed the design by ParabolicTech to work with the factory screws and added recesses for…
motor cooling fan mount for Awesomatix A800MMX various designs slightly adjustable in height, mounting with or without double-sided adhesive tape printing: 0.4 nozzle, 0.2mm layer height 4 walls, 6 bottom and top layers, infill 99%, speed…
I designed this case to provide both protection for the Basys 3 board and to eliminate handling the lead solder joints. All of the I/O is easily accessible. The base has four 3.5mm tall standoffs to allow room for the solder joints & pins…
The CAD Guy and Airwaves Ted created both nice Battery storage systems. I prefer the more simple version of Ted´s design (doesn´t need an additional bottom to be stackable) but both look great! Here I remix the empty box to be printed…
Remix-A-Stix are a set of parametric ball joints, sockets, and connectors, compatible with Mini 13/Lucky 13 ball joints (via 6mm ball joints) and Gunpla accessories (via 3mm pegs & holes). Dimensions and tolerances can be remixed using…
A small (54 x 54mm) tub for the Tactix fasteners storage case shown in the photos. Ideal for nuts, bolts, screws small nails and washers.
motor cooling fan mount for Awesomatix A800MMX
These are modular containers that fit in Tactix/Montgomery/Keji brand 12 compartment storage boxes. The containers can be easily moved between boxes and rearranged to make any combination of storage sizes. They are designed to fit within…
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
Some bumpers i designed for my 1/12th Awesomatix A12 and for the cars of my friends. They need to be printed in Flexable filament which can be a challenge sometimes. I might post some pictures later. Also, I might alter the design of the…
Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…
It actually needs work for top performance.
This is compatible with Connetix Ball Run, use it when you don't want to use a magnetic tile. I use these for connections hanging in the air (see picture) If the connetix tubes don't attach to the bottom side, check your 3d printer for…
.3mf Ready to Print by TIXEN No supports required Sizes : 10°, 15° and 20° Please, Print it! Share it! and let me know about any suggestion or any issues Contact info: Email: [email protected] IG: @tixen.ar This work is licensed under a…
A 108 x 53.5mm tray to fit a tactix storage organiser. See the video here, https://www.youtube.com/watch?v=lb78-fPxpl4
This is an adapter to directly connect the Bosch GCM 800 SJ (and I suppose several other types) to the Nilfisk Attix 30 vacuum cleaner. Both systems have a click-in mechanism for a fast and easy assembly and disassembly providing a…
Use external 10mm brim, set perimeters to 3 and print with the long part along the Y axis.
Stan Lee Memorial Print Remix (3mf Ready to Print by TIXEN) This is a REMIX from: https://www.prusaprinters.org/prints/1439-stan-lee-memorial-print made by Hex3d https://www.prusaprinters.org/social/4304-hex3d/prints .3mf Ready to Print…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fYpxiQJ5hxV Print instructions Category: 3D Printing
LED Upgrade to get a better view on the print. My Recommendation to download: MK3S Led_Panel.stl or Panel_Clip_20.stl mk3s_led_panel_stop.stl I didm´t find something else like this without putting something unelegant to the extruder. Top…
Holder for Apple Watch Bands. 2 Parts Recomended 4 walls, and >25% infill. Supports recomended
This is a REMIX from: https://www.myminifactory.com/object/3d-print-fancy-skull-1-94707 .3mf Ready to Print FDM - with Supports and variable layer height SLA - hollowed, oriented and supports Please, Print it! Share it! and let me know…
Print at 0.2mm layer height with no supports. Default PETG Prusa profile works great. This is an improvement of my original design: Improved grippers for comfort (fingers rest closer together) Beefed up hinge Tightened tolerances for a…
It prints flat side down. This is a remix of another persons work.
Avevo bisogno di una placca che avesse degli agganci piu solidi, che non si rompessero dopo un eventuale rimozione ho modificato una versione caricata by m0l3st0, metto a disposizione anche la placca per 6 posti Per la stampa: consiglio…
Hey friends, An Australian brand called Multix offers a free plastic hanger which can be screwed into kitchen cupboards to hang their freezer bags. We preferred to put ours on the side of the fridge rather than screw into a cupboard, so I…
.3mf Ready to Print by TIXEN This is a REMIX from: https://www.prusaprinters.org/prints/302-surprised-buddha made by Kirby Downey https://www.prusaprinters.org/social/65-kirby-downey/prints FDM - with variable layer height No supports…
Awesomatix body Stopper. Made for A800R but fits also MMX and others. Distance between holes is 28mm
Was sick of the non-adjustable stand so I bought a VESA mount for my monitor but adapters were around $30 on amazon so decided to make my own. The VESA adapter is designed for the MSI optic G24C however may work for other monitors.…
Piratix Treasure Coin with shark. Fits with all accessories that use coins. Print without supports.
My version of a tweak stick for Awesomatix A800MMX the parts fit on a rod with 10 mm outer diameter I had some aluminum tubes with 10 mm outer and 8.2 mm inner diameter lying around simple version: use o-rings to hold the printed blocks…
BOM STAND (2) ¼-20 SHCS 3" partially threaded (1) ¼-20 SHCS 1" Partially threaded (4) 10-32 3/4" Flatheads (Sharpened to point - optional) COLLAR (2) 6-32 SHCS ¾" Fully threaded BUILD STAND - Install one ¼-20 SHCS 3" and tighten until…
Awesomatix A12X Fan holder. Perfekt sit with IP 8800 Lipo
Remix of https://www.printables.com/model/336439-leg-strap-base-plate-for-k6ark-cw-key-morse-code-p and https://www.printables.com/model/154551-specialized-stix-to-headlamp-adapter to create a strap mount for Specialized Stix bike lights…
I've made a few improvements from the original design, and hopefully should be a bit beefier than the original which had very thin walls seemingly prone to cracking at the top. Also included a place to snap the mesh filter into the print…
The spacer you need in between your MSI Optix Mag 24C and your Vesa mount. It's a simple spacer, I printed mine out of PLA with a 20% infill and it took about three hours on my Prusa Mk3+ The holes on the monitor are threaded for an M4…
Hola Os comparto este organizador que he hecho para las pinturas acrílicas de la marca Artix, en el soporte cogen 12 pinturas. Lo he impreso en altura de capa 0.3mm en un 15% de relleno, aunque podéis configurarlo de otra manera para que…
This blank cover is designed to close empty spaces inside BTicino Matix electrical boxes, providing a clean and neat installation. 🔹 Recommended Print Settings : Material: PLA Walls: 3 Top and Bottom Layers: 3 Supports: Organic, only on…
Nová ramena kol která nejsou spojena rychle se ničícím kulovým kloubem ale ocelovýma oskama. Také jsou upravena vystouplým uložením tlumičů pro větší výšku auta. Osky jsou 2.5 mm ocelový drát. Na jehož konce je potřeby vyřezat závit pro…
* Update: added a scooped version that makes it easier to retrieve items from the box - inspired by Zack Freedman's Gridfinity bins. A parts box to fit the Tactix 310mm organiser from Bunnings. Includes a spot for a 3mm laser etch label.…
I've designed this to attach my Specialized Stix taillight to my Tortec Velocity Hybrid pannier rack which has vertical holes 19mm spaced. It is quite short as this is a narrow rack but should fit on any racks which have the vertical…
This is a very simple remix to adapt Mr-J's organisers for the smaller 320002 5x compartment storage box. It's simply made by scaling the models, but the walls all still print well with standard 0.4 nozzle and 0.2 layer heights.…
various containers For Small part. fit in Tactix 54 x 54 x 44 organizer
Order in the Box! My batteries always flew through my box. No real overview on what I had on board. Order things NOT or DOUBLE. This ended today! I created several insert boxes for my favourite toolboxes from different suppliers, but…
For more variety in our ball runs
I printed these in PLA at 20% infill at 0.2 layer height. You will have to use screws to attach the legs to the base of the tripod and a screw so that the clip can hold correctly. You may have to scale the model up as I had to after…
This is a remix of a 3-gang cover plate for the BTicino Matix series, designed to hold three sockets in a single frame. 🛠 Remix improvements: Added a fillet around the base for a cleaner, more polished look. Added fillets on the locking…
The tactix box is great for storing small parts, but makes accessing difficult, with cornered edges and divides that easily lift causing parts to spill between draws. This is a simple parametric box insert, with a handle for easy removal,…
My toddler is really into the Duplo Train set at the moment and worked out the trailer platforms of his magnetic tile sets have hooks that could be attached - the Connetix and Megagon sets have almost identical sized holes and fittings…
Printed with PLA Magnets can be found here https://a.co/d/0eV5mfH6 The magnets can be pressure fitted or stuck with a drop of super glue Printed with the magnet holes facing down I mirrored the model in the slicer along the x-axis to get…
Awesomatix caster for Arrowmax setup System
Well, the title is quite self explanatory. PLA is fine, I printed mine in PLA silk for that extra look.
Use those: https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m3-standard-100-stk-pcs?_pos=2&_sid=34d0fc8a7&_ss=r
As the Nilfisk Attix 30 vacuum cleaner does not provide any convenient mechanism for storing the power cable and the hose, I designed a hook for it. The hook can be put at the rear side and once clicked onto the handle stays there…
AWESOMATIX Diff Spanner Tool Use it to un-tighten your diff, not to tighten it !
This is a model to mount the 1UP fan on Awesomatix A800Rs. The local hobby shop was out of other fans when I built mine up and the 1UP fan seemed like a nice clean and tidy fan, not to mention they seem to make an extensive selection of…
I'm an avid cyclist, and my rear light of choice is the Specialized Stix ( https://www.specialized.com/us/en/stix-elite-2-taillight/p/173394?searchText=49120-2100&color=270193-173394 ). These have multiple light modes, are bright, and…
My requirements: No visible Screws No glueing Diffusor should separate the pixels very well, an should have very thin walls Diffusor shoud have a light color on the top to be inconspicuous Face of the front should be nice looking…
https://www.tactixtools.com/productinfo-2342.html https://www.tactixtools.com/productinfo-2356.html I got these for hardware, but they needed more sub divisions. You can mix and match to add more subdivisions as you please. I can fit all…
Pixar Inspired Table/Wall mounted Work Lamp Detailed Assembly Guide - https://drive.google.com/file/d/1GmhdHG4b5Mt_maW0P7evdiY14q5s7u_X/view?usp=sharing Print instructions All part can be printed w/o Support. Lay the parts with flat side…
I couldn't find the draw system for TACTIX branded modular system as shown here: https://www.bunnings.com.au/tactix-9-box-storage-modular-tower_p2584025 Distributed by Meridan International in Australia through Bunnings I designed a drop…
Simple DIN rail mount for Huawei OptiXstar EG8010Hv6 modem. Part1 and Part2 should be glued together
This is a remix from https://www.printables.com/en/model/223063-msi-optix-g24c-vesa-adapter-100x100/files I could not find a complete file I modified this one and it works perfectly. The curved monitor has a different mount than the…
These inserts fit in the cheap TacTix part organiser trays that are available in New Zealand and Australia (and maybe elsewhere). The bins are inspired by Gridfinity and include options for A scoop in the bottom to make picking bits up…
Objective: The goal is to create a line of 5 tiles in a row, either horizontally, vertically, or diagonally. Player Setup: Each player selects a unique color for their tiles. Gameplay: The first player places one tile on the game board.…
These models are for the Tactix 320001. If you are looking for a parts container and live in the US, I have found the best place to purchase Tactix parts containers is Home Depot. These and other models are generally available for 30%…
Here is a newer and nicer looking watch stand for the Garmin Tactix Charlie watch. This one has a nice curved support for the head to rest on adding a nicer more aesthetically pleasing look to it. It has a wide base to add more stability…
I've previously made a number of inserts for the smaller tactix boxes. (https://www.printables.com/model/241150-easy-access-inserts-for-tactix-containers-small-pa) This is a range suitable for the larger 380mm boxes. Fully parametric f3d…
This Mount is meant to be Printed 4 times and can be clipped to the top of a MSI Optix MAG274QRF-QD screen. The two cable files can be printed once each and are used to stop the cable from pulling the tracker out the Top.
3mf ready to print.
This is a replacement bin for designed to be compatible with the BAUER Storage System Modular Organizer Item #58513 available at Harbor Freight, it will also fit similar items from Tactix(who makes the bins harbor freight rebrands) and…
My grilfried brike the part that on the stick where you put it in the vacuum cleaner it self. So i made a new one from ABS. Works good again.
A smaller version of my 3d rgb led matrix project. The project can found at: https://www.instructables.com/A-Simple-3D-Printed-Frame-for-an-RGB-LED-Panel/ The panel used in this project is https://www.adafruit.com/product/5036 It is a…
A minimalistic cover that protects your analog sticks. It goes over the track pads and snaps in place. It has holes for the LED status light and USB-C port. See below for usage. Works well for my use case of tossing the controller into my…
OCTIX is a block and stick construction toy. The basic blocks and connections are octagons. The sticks come in 50, 70, 100, and 140 mm [multiples of 2 and sqrt(2)] since assembly is always at multiples of 45 degree angles. If you ever…
Useful to create bent springs on your Awesomatix TC Easily change your springs to 100 or to 110 . And if you just want 90* springs, you can check to make sure they're actually the same left to right.
High-Performance Bumper for Awesomatix A700 & A800 This meticulously engineered bumper is the result of extensive research conducted in 2022, with a primary focus on enhancing the performance, weight distribution, and overall balance of…
Diesen Abroller für Klebebänder habe ich konstruiert, gedruckt, montiert und in Verwendung. Zur Erhöhung der Standfestigkeit habe ich in der Strebe ein Metallstück SW 19 mm eingelegt. To increase the stability, I inserted a piece of metal…
This custom design-build allows Kodak Advantix film to be digitized using the Canon Film Viewer IW-50 ( PDF Manual ) film scanner. The model consists of two parts: Part 1 - IW-50 slide-in adapter. (The industry term for this part is “the…
copriforo adattabile alla serie Matix Bticino ottimo per creare adattatori personalizzati
Wanted some nice drop in containers for the Bunnings Tactix organiser. Curved bin for the top left and right spots. Single bin for single spots. Tapered bin for the side spots.
A case insert designed for the Tactix Tough Case (medium). It holds an iPad, the charger, 6 batteries, and the scanner. (https://www.bunnings.com.au/tactix-tough-case-in-tan-medium_p0331393) I'd print it in TPU with a low infill…
Yet another spool holder, simple. Edits 16-Sep-2019 - Simplier new version, only one screw needed (4.5mm diameter)
English version below Lego a Lego Duplo nadstavba pro magnetickou stavebnici Connetix/Magna-tiles Lego Duplo a magnetické stavebnice Connetix/Magna-tiles máme doma a tak mě napadlo tyto skvělé stavebnice propojit. Model byl původně určen…
Modelled to be as close to the original as possible. Save yourself the 4-6 week wait for Multix to send you one. Whether you need to replace a hook to existing Multix dispenser system hook (older style. I might order a new type to model…
This is a plug for Nilfisk Attix shop vacs in situations where you want to transport the shop vac without the hose plugged in. To avoid dust escaping the gaping hole, use this plug. Mine is used on a Nilfisk Alto Attix 360 - 21 and is…
Front bumper brace for the awesomatix RC car
Cups for small components to fit into Tactix 380mm Organisers from Bunnings. Variants for 1x1 and 1x2 segment cups. Unlike other designs i've seen, this is meant for spiral vase mode. This saves on filament and print time. Work in…
This is a warp pipe made for Connetix magnetic tiles with an open hole for figurines to go through. There is an option for 1x1 squares and 2x2 squares for larger figurines. The magnets I used are pictured from Bunnings Australia but I…
TacTix Organizer Mount for under shelfs or tables. Alternative instead of wall mounting.
I purchased the Btcino Living box along with the Btcino Matix sockets, but unfortunately they turned out to be incompatible. Have you also experienced this situation? The wires behind the sockets get crushed and fail to hold the sockets…
