Counting matching models…
Here I have my model of the ROTJ variation of the well known E-11 Blaster. I designed this after having difficulty with other models where the assembly was quite challenging and messy. All the parts have been divided into separate plates…
Designed to snugly fit a metal bar (or any bar with a 16 mm diameter), these hooks are stable and can easily hold the weight of heavy coats. I printed mine in PLA with these settings: 0.28 mm layer height, 100% infill, and 6 perimeters.…
Commercial use is NOT allowed for this model
It's been a while since I shared anything. Model building was on hold for a long time after the passing of my father, the person I learned it from when I was little. I was planning to first draw and build a typical Dutch "opduwer" but…
I've got a 2000 Jeep TJ and wanted some place to hang my keys separate from the rest of the family. Was going to just hammer a few nails into an interesting piece of wood I found, but my son thought a jeep holder would be better. Didn't…
Overview I converted my son's Pro Boat Sprintjet 9" boat to run a 1806 brushless outrunner motor, standard RX41 receiver, & 20A BL ESC. I designed a few parts to optimize the performance with the new drive system. Here they are… 3-Blade…
While in the Endor Imperial bunker scene in Return of the Jedi Leia uses the “SoroSuub Corporation (SC) X-30 “Lancer” target blast pistol”
This is an adapter for the later model TJs and LJs (probably 2003-2006) that enables the use of a cabin filter for the HVAC system. These Jeeps never had cabin air filters, which means all the dust you eat on the road or trail ends up…
Swiffer Wetjet Wallmount Just a wallmount for the swiffer wetjet. Nothing fancy, but useful. Print Instructions PLA works just fine for this application 0.2mm layer height 4 perimeters 40% infill
Description Everyone knows Luke's lightsaber from Return of the Jedi. Disney sells them (I have one). But for those with a keen eye for details will know that the lightsaber Luke uses in most of ROTJ does not match what we get in the…
Softjaws for my HBM 250x550 Norton Profi Lathe with 125mm Sanou 3-Jaw-Chuck K11-125.
I printed with slim tree supports.
To open shopping carts without having to use money. Also this model can be released from the cart when opened! Just insert the coin and release it from the cart, it's that simple.
This is a three part panel that uses #10-32 screws and captured nuts to hold on the faceplate. This allows for easy access to the switches and wiring. Print the brackets mirrored and one face panel. Or cut the face panel out of wood,…
UK: “Google translate” Zodiac 3D Font with star sign convention for 3D Stl files. Fonts are edited in Adobe illustrator and exported to svg files which are imported into tinkercad and saved to stl files... DK: Stjernetegn 3D Skrifttype…
Convert your factory speaker pods into 6.5" speaker pods with 0 Modification to the pods and using the factory hardware screws plus 4 M3's. This is on my '04 Wrangler but should fit all other TJ models. Print instructions Category:…
Hello! I have an updated version of this model that you can find here The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any…
With this design I tried to make an accurate replica of the Luke Skywalker Lightsaber from the Return of the Jedi (Hero Version). Easy to assemble! No Glue necessary! :) Just screw all the parts together in the right order. If printed at…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
I removed the factory subwoofer and installed an aftermarket one in the center console of my 2002 Jeep TJ (Wrangler). After doing that, the factory cubby in the center console was too deep, so I needed to replace it. The factory one also…
The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any supports or glue, all the parts screw together and are compatible with…
Mine broke off into my hand one cold morning so I made a replacement. Should be a snug fit over the stem in the dash. I recommend printing in something more resilient to heat than PLA, I chose PETG for mine and it has been fine for a year…
After my son took the IKEA Tjusig off the wall (he must have pulled a little too hard on it ), we needed a replacement part. This is the result. I printed the part with 100% infill and it fit and was extremely tight. Maybe it will help…
As probably many of you have gone trough - our Swiffer WetJet handle broke and I decided to try crafting a new one instead dumping the thing and buying a new one. Less plastics to landfill + money saved = winner :) The handle is design…
Historically the Dutch Railways (Nederlandse Spoorwegen) placed a pretty simple buffer stop at the end of the line. This is a Guage 1 / 1:32 version that can be clipped on to LGB-rails. It won't fit Marklin rails because these rails are…
So this is my build of the really well done boba fett gun created by Burgs. I didn’t like the stock, so I made one a little fancier. I decided to add an internal spring for the trigger and designed a plastic piece that goes inside the…
This is a professionally made STEP file for printing the HVAC blend door lever, which is no longer possible to buy.
Switch panel for Jeep wrangler TJ, i made this as i needed more switches for my accessory's. The panel replaces either the airbag switch or the empty panel behind the shifter. See files i have included 3x switch and 1x cig plug files or a…
Ein Pfeifenständer mit minimalem Überhang zum platzsparenden Aufstellen der Tabakpfeife
Small bin and lid made to fit in the unused area of the under hood fusebox in a 2002 Jeep TJ. I used it to store spare fuses in a small Altoids tin. The main box body is printed in PETG-CF for heat resistance and the lid is TPU so it is a…
According to the assembly manual, there is a piece that you can use to secure an IKEA TJUSIG shoe rack on top of another one. But if your life is even slightly comparable to mine, by the time you have the Idea to do this, that piece…
The Brötje radiators use 4 plastic clips (2 on each side) to hold the metal side panels. They have to be attached to two pipes inside the radiator. They are rather tight and tend to break when removing one site panel for cleaning…
I was inspired by Unimatrixred's ESB Vader Saber, and wanted the complete set, so here it is Darth Vaders ROTJ stunt saber I printed everything at 1.5 layer height at 60% infill (I wanted it heavy) Using eSun PLA+ Grey You can print and…
Little plastic clip that keeps the internal door lock/latch bar attached to the internal door handle on a Jeep TJ (probably a lot of other cards as well). All of the ones I found at the auto-parts store would not stay connected so the…
Description Ok, “easy” might be an understatement but with minimal skill it should be perfectly doable! And otherwise it is a nifty miniature sailboat. This is a tiny tiny scale model of a traditional Dutch SeaTjalk that was very common…
Most of the parts used for the ROTJ EE-3 blaster are found parts, while some might have been scratch built. On the stock we have 2 Revell Visible V8 Model Gear Case and 2 rectangular unidentified parts (so far). 1 Revell F-4E Phantom II…
Description This is my take on Luke's ROTJ Hero saber. It is based off schematics found online that were created from a molding of the original prop. This includes small details like the 2mm and 3mm rings on the ‘grenade grip’. And now an…
1:1 Scale Design of Luke's Lightsaber from Return of the Jedi If you want to paint it, I suggest using files 1-4, file 5 is for all in one go Use no supports for File 3 (Top Hilt-Grip), Normal Supports for Files 1 and 2 (Top/Bottom…
Replacement Kenner ROTJ Speeder Bike Handles As featured on Toy Polloi YouTube Channel! http://youtube.com/user/toypolloi/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0ELDn0hmhOT Print Settings…
A filler cap for the factory bumper when removing the OEM bubble caps. Print one normal and a mirrored version for the other side. Place on bumper and drill in place for best fit.
Made Softjaws for Sanou K72-125 4-Jaw-Chuck for my HBM 250x550 Norton Profi Lathe
This is a remix of a Stork card I found on Thingiverse. I've created a stand for it, so you can display it as a birth card. Made this as a gift for my family for our first born son. I've printed it on my Bambulab P1S with AMS for easy…
Softjaws (lenght 100mm) for a vise. So that your parts are not damaged when clamped in the vice. With three holes on the back to press in or glue in magnets Ø3x2.
Prints quick, does the job quicker! --- I put in a lot of design, testing and engineering hours into all my projects, while keeping my designs free and available for all. Please consider buying me a coffee to show your support and don't…
This is ‘’Nijntje'' a child-book character invented by Dick Bruna. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions please…
For hansgrohe Axor scale to about ~95%.
I bought some nice speakers for my wife's 2002 Jeep and after stuffing them in the dashboard with a variant of the brackets around I decided that it didn't sound as good as it could. I couldn't find anything like this (maybe that is for a…
Voor mensen die veel tekenen is dit wel een hulpmiddel. Rondjes tekenen zonder passer. Voor mensen die aan meetkunde doen. In 2 kleurern afgedrukt. This is a tool for people who draw a lot. Draw circles without a compass. For people who…
use cura slicer 75deg option prnits without support at 0,15 layer height HAVE fun Studentwork FDM supportless mesh by meshy.ai PLEASE LIKE as you download !! THERE is more here in the Profile from DND wargame stuff TAKE a LOOK
Perfect om als kado te geven. Maar je kunt het ook gewoon geven.
So I just purchased and mounted a TJUSIG hanger from IKEA and I notice that despite the great design there is a minor aesthetic thing (personal opinion), the hex screws remain visible. I tough that would be great to have them covered so I…
Remixed from another switch panel , but this switch panel is meant for an Auxbeam BA80 (or similar) 8 gang controller. It uses the same mounting brackets as the original design. There is space available on the right side of the panel for…
The lightsaber that was used by the legendary Jedi Knight Luke Skywalker after his father's lightsaber was lost in a duel with Darth Vader. The weapon was most iconically used in Luke's final battle with Vader to complete the young hero's…
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver A - dot pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap. The little one connects…
Swiffer Wetjet Wallmount V2 taller
This is a real bird I recently learned about. They have excellent eyebrows. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These tools can be used to fix the camshaft on MultiAir engines and the crankshaft on T-Jet and MultiAir. This makes it easier to replace the timing belt. There are two versions for the camshaft. The version without a pin allows you to…
GTJ Modular MarbleRun – Starter Track This is another one of my entries for the “Marble Runs” contest on Printables . Over the past few weeks, I have designed a growing range of GraviTrax Junior-compatible elements. For this contest, I…
different sizes of spacers used in construction, for example to align the ceiling.
I printed this on a Prusa MK3 at 0.24mm layer height (0.20 initial layer) in PLA. Generate support up to the base of the pot only by either using a support blocker above 5mm or setting the support overhang angle to 85 degrees. The…
Fusion 360 file and example STLs Category: Buildings & Structures
Beeld van de zak van Sinterklaas ter decoratie voor deze typisch Nederlandse feestdagen. Let op: zorg er voor dat je het met ondersteuning print! Kijk ook bij mijn andere modellen van Hoofdpiet en een zak met cadeautjes.
Print the model with rim and support. Used Organic support.
Parameterizable OpenScad model of a Tjusig connector. Adjust any parameter you like!
An ‘’Amsterdam's Paaltje'', these poles can be found all around Amsterdam. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions…
I own an original and thought to share the design with you. I've added two variants of fitting (GU10 and E14) also I've mirrored the base so you can choose if you want to show the bed structure in your print/lamp or the top side. Mirrored…
This air intake debris filter fits all stock air intake cones for Jeep Wrangler TJ model years 97-06. It likely will fit many other Jeep models and years, but I have only tested it on that specific one. This part is a simple safeguard…
I noticed my Jeep TJ had a spot to store a fuse puller in the underhood PDC, but I could not find any production pullers that fit. This fits the early model TJs, although I understand late model may have a different style of PDC lid, so…
The kennel adapters that come included with VetJets are some of the worst pieces of junk (and most expensive) I have encountered at my clinic. Here is an alternative that is far more compatible between kennels and durable (and cheaper)…
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver B - easier to print solid line pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap.…
I wanted to add a fan to push the air out from my EnXLosure case. However, I didn't have room for the fan to be mounted behind the case. This design has a cleaner overall look which complements the EnXLosure. I rummaged through my extra…
This is a headlight ring nut/clip/clamp/mount or whatever for a Jeep TJ Wrangler the ones on my TJ were stripped out and they would no longer hold the beauty/vanity chrome ring that goes around the headlight any more. I sorta copied…
I wanted more space under the first shelf of the IKEA TJUSIG Shoe Rack, so I designed some simple risers to raise the entire rack by 4 cm. However, in creating these I discovered that all the legs of my TJUSIG Shoe Rack were different…
I made this belt to customize my The Black Series Endor Luke for a look more akin to the Death Star scenes of the film. Comes in 3 pieces being the belt itself, the buckle, and a pouch. To put it on the figure you make a cut under the…
Kruidenpotje van Verstegen vind je overal. Handige potjes met de naam van het kruid goed zichtbaar op de zijkant. Voor de verschillende kruiden zijn er verschillende deksels, met grotere of met kleinere strooiopening. Dit nieuwe dekseltje…
Shoe rack hook: https://www.printables.com/model/579578-ikea-tjusig-shoe-rack-side-hook
These are some of the fins (and the little handle nubbin) to replace broken parts in the front air vents of a 2002 Jeep TJ Wrangler. I printed them in Bambu ABS GF which should easily hold up to the heat. The fins all have a flat back…
A gear of my thickness broke a while ago. The sparepart costs more than 40 €, so i decided to remodel it. Works like a charm. Print settings: Print with something sturdy but not brittle (Tough PLA or Nylon) 100 % Infill Standard-Quality…
Fusion 360 parameterized model of an Amsterdammertje Category: Buildings & Structures
Very rudimentary spacer to raise the 3rd brake light up 1" to clear my 33" spare. How I Designed This Removed the 3rd brake light and measured rough estimates. Could be optimized, but it works. Category: Automotive
Bootjack for sizes US 5/6 - US 11/12 The bootjack is designed to fit on the print bed of a Prusa MK3S (without skirt). Stiefelknecht für Größen EU 38/39 - 45/46. Die Maße sind auf das Printbed eines Prusa MK3s abgestimmt (Rand/Schleife…
FWIW - I printed this in Nylon (Dupont Zytel) as I'm hoping it will be both tough and chemical resistant which will be both needed on a Lathe.
I needed some new skid shoes for my snow blower, so I made this model for it. I live in Minnesota and it has lasted two seasons so far. I printed them out of ABS with 100% infill on the top and bottom (you can flip them 180 degrees after…
The BitJoint is a bit-attachment that makes it possible to screw into even the most tricky corners. The non-rotating handle makes it easy to use. Magnets can be used inside to prevent the bit-attachment from falling out. Max angle approx.…
Use the ground pod to put the camera securely low level. For instance, I like to use it on the beach for taking pictures of birds. A bean bag would be another option, but with the filling it is too heavy for traveling or long trips. The…
I love snacking on roasted Ültje peanuts while working. Their empty cans make for a wonderful small-parts storage box. I created this organizer to fit inside of an empty Ültje peanut-can with a size of roughly 72x66mm. The center stem is…
Hat rack hook: https://www.printables.com/model/579535-ikea-tjusig-hat-rack-side-hook
Disclaimer: This involves modifying a safety system on your vehicle. Perform at your own risk. This is a switch plate that fits in place of the passenger airbag disable switch found in the center console on early (1997-2002) Jeep Wrangler…
I got tired of using the clunky tool for many different sizes of the Neoperl aerators. So I made my own for the size I need modeled after the original tool. The wall strenght is 2mm instead of 1mm of the original tool to give it more…
If you want to be flexible in changing colors in you Sketcher's Pocket Set palette, these pan will help you. This model also contains pans to be put in the brush container (replacing the brush). I am using a small piece of Blue Tack for…
This is a cradle/mount to put in a wireless charger into a Jeep TJ wrangler. The wireless charger it is designed for is an Anker 313 Magnetic Wireless Charger. This means you can buy the little metal rings to go on your phone to make it…
This is a simple Hook for the IKEA TJUSIG.
Unfortunately pans and expansion pans for the Portable Painter Classic palette are not available in Europe, especially in Germany. So I created these pans for my own Portable Painter palettes. A small lid is supposed to be used by a plier…
This is a “gasket” for where the pin in the bottom of the upper door frame goes into the body of the Jeep. It keeps the pin from rattling against the body when the sides of the soft top are off. This was made to fit the 2002 Jeep TJ with…
just print it. I use 0,4. English and Norwegian version for download. The weekdays are 4,5cm wide and the whole thing takes up 6cm horizontally and 4,5cm vertically in a 5 week month.
This design should be able to use most any 4 inch round tail light. The reverse lights and license plate light are "eagle eye LEDs" from Amazon . I found some reflective rings to keep rear reflectors on it. The hardest thing to find were…
Soft Jaws for Rockshox Monarch Sevice. Print in PETG. With holes for 1x5mm Magnets.
its just the game
