132 models
is a remix of the project: https://www.thingiverse.com/thing:3889042/comments Adapted for octopus v1.1… it is in beta but i am using it and it works fine ... Print upside down and with media from the plate
For cooling the TMCs on the Manta M8P. I tested it with BTT TMC2209 and sunon 5015. Print it upside down. Screw: M3x8 SHCS Category: 3D Printer Parts
Single support for Mellow's TMC 5160 HV to be hooked to the DIN rail I made them for my VZ-Bot 330 that I have under construction. I printed them with PetG You will need for each support: - 8 M3 x 4.6 brass inserts; -4 M3 x 10mm screws;…
there are 2 options here to print a complete AK shroud or the AK SHORT this means one with out the gasblock. but you can add this ad this on there as a separate piece. and possibly use this for other shrouds as wel as decoration. the AK…
I have not field tested jet, but it looks to work really well. The mechanism will not activate when you hold it upside down but that will be a rare case. to hold your marker in anyways. when you print the parts just make sure that the…
For external stepper driver BTT TMC5160T PLUS V1.0 (w/o case) . Assembly Guide Fit [POS 2 - adapter] to [POS 3 - DIN rail bracket] using 2x [POS 6 - screw - M3x8] to create [sub assembly 1]. Fit [POS 5 - axial fan - 3010] to [POS 1 - fan…
Fly TMC5160 V1.2 DINrail mount Compact DINrail mount for FLY TMC5160 V1.2 or V1.5 if you use a VORON printer and just need two, instead of four drivers. 12V 4010 axial fans can be clipped inside of the mount if your flow settings are…
Tippmann TMC Mag Winder, three versions. One for use as a "keyring", snug fit so it stays in place. Two to use with a bit screw, one snug fit and one loose.. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
A functional record player turntable made from 3D printed and 3D printer parts, With proper AT3600L needle and adjuestable tracking weight. Testing of my 3D printed turntable (V1-V3): https://youtu.be/MylsAJhz4OQ Features: No need for…
Sorry for the bad Fusion design, still learning. Had to design my own and shift it above the DIN rail to get more space on the V-Core 3 200. The DIN bracket is not my design this is reused because it fits nice and has heat inserts. DIN…
with this drop down buffer tube is it easier to aim to with a paintball mask. of course it will be slightly longer than the stock configuration. you can use a PVC tube to make the tube stronger. and you can ad a extra bolt to it. link to…
This is magazine clamp for a Tippmann TMC. I really like the look they give my paintball marker. Not to mention increased reload times. This design with my "printing formula" have made a clamp that withstand actual paintball play. You…
This is a MCU Board mounting bracket for Octopus and Manta M8P that holds 4 BTT TMC5160T Pro drivers for AWD Mods/VZbot. BOM: 20X M3*4*5 Heat set inserts 20X M3*8 SHCS (If using the fan cases in the picture then 16X M3*10 and 4X M3*8) Two…
Here’s a simple and effective DIN mount for the BigThree Tech Octopus Pro with 4 x 5160T Plus stepper drivers. In addition to holding the motherboard and stepper drivers, this mount also allows you to install 4 x 40mm fans to cool the…
This shroud design is loosely based on the STG 44 sturmgewehr.so it's okay if you image it to be something else ;) I prefer this type of shrouds over shrouds with rails on it. and besides it makes the basic TMC look different! Note: this…
This is a mount to retrofit 4x BTT TMC5160T Plus drivers onto the VzBot Mellow Super 8 Mount as designed by Simon Vez in place of the Melllow TMC5160 drivers. The mount elevates the drives sufficiently to clear most wiring channels. Add…
Allows mounting three 40XX fans (40mm fans of any thickness) to cool stepper drivers on an MKS Monster8 v2 board. The fan mounting holes are designed for heatset inserts (m3x4x5). M3x14 (x12) for fan mounting. M3x50 (x2) for coller…
Double DIN Mount BTT TMC5160T Plus Narrow DIN rail mount for two BTT TNC5160T Plus external stepper drivers using the Voron PCB DIN rail clips. BOM 8x M3x8 (SHCS or BHCS) 4x M2x8 selftapping screws (uses the standard Voron ones) 2x BTT…
Don't want to pay for a 70$ HVA key ? Print the cover and use it on a blank key. — I retro-enginered the 701 key from Husqvarna because I destroy a key into my motorcycle. This model isn't 100% close to the original key because some curve…
Inspired by the Firststrike Floating Buttstock i designed this simple adapter to mount the stock TMC Air-trough Buttstock directly to the bottle so you dont have to worry about fillnipple or pressure gauge position it also gives a…
I could never find a fan bracket that fit fans in the original overhead position for tall heat sinks on the 2208 and up drivers. They seemed to be all from the side or require replacing a chunk of the bottom plate with another printed…
Needed to mount my drivers and this was the best solution I could come up with.
this is the MOLLE version of the TMC MAG pouch. there are different sizes Molle strips. this done in case you need a longer one to balance out the pouch on your molle by giving it more support. also you might find it a slightly tight fit…
with this drop down 98 adapter is it easier to aim to with a paintball mask. of course it will be slightly longer than the stock configuration. you can add a extra bolt. to make it sronger. and you will need 2 bolts for the 98 stock clamp…
---------------- the parts list and the documentation to get started can be found here the link to the new manuals can be found here https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing ---------------…
Because I needed a model of the TMC 5160 Plus stepper driver from Mellow 3D, but couldn't find one, I decided to model it. Enjoy! Link to Mellow's doc for the driver can be found here .
This one have not been printed and tested but this one should work without any problem. if you like to be the cover photo of this one. then you can send a picture of your marker with the adapter to me thanks. bitchute movie link:…
This is a Mellow Fly TMC5160TA Mount for my DIN Rail Bracket. You can find the bracket here ! In addition I created a fan mount. The fan mount can be used without the rail mount. The fan mount is for 40mm fans. The printable spacer can be…
this was diffidently more complicated to make. but it does look nice I hope you guys can appreciate the time I put into this stuff. this adapter should work on a couple of tippmann markers that uses the same feedneck mounting points as…
Eng anliegende Aufziehhilfe für TMC/Stormer Magazine von Tippmann. Leicht zu drucken und minimalistisch.
Vertical DIN-rail mount for MKS TMC2160-0C external stepper drivers. Use PCB DIN clip to atach it to the rail. I taped an M3 thread in the holes but you can also directly screw into it. Link for PCB DIN CLIP from VORON github page.
Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…
This is simple marker tab for identification of power cords located under your desk or in the rack/cabinet. Designed to use - 0.6 mm Text embossing and two color, layer based printing. Best to use with 2.6mm wide zip ties
with this part you can place different brand of loaders on your mag loader with the adjustable feedneck. the other original parts can be found at https://www.thingiverse.com/thing:2918336 movie link: Print Settings Printer Brand: Creality…
These dual mag covers have the purpose of keeping dust, paint, rain ad sand out of your mags wile using Dual mags on your TMC. in combination with the Tippmann mag coupler by FiXeL666 https://www.thingiverse.com/thing:3065303 link to…
This is a simple enclosure to mount the OpenFFB TMC Motor Driver & STM32 Controller stack and provide some level of protection to circuit boards. Learn more about the OpenFFB project here: https://github.com/Ultrawipf/OpenFFBoard/wiki…
this will work with the TMC short AK hand guard. but it can be used on other markers as well like the FGC68. a recommended thing to print is the barrel sizer so you can get close to the size you will need for your 7/8 barrel if you like…
Einfacher Trichter zum Befüllen von Tippmann TMC/Stormer Magazinen. Reindrücken und einfüllen.
this is the BELT version of the TMC MAG pouch. there is a support bar for this one. in case you need more support to balance out the pouch on your belt by giving it more support. also you might find it a slightly tight fit at first. but…
I could base this adapter only from 1 buttstock piece to the tolerances may be off. but it should work out and this one is a lot compacter vs the X7 adapter so this one could be more useful. please feel free to share pictures of it I like…
if you like to use the original TMC shroud, but with a different barrel. than you can use one of these barrel adapters. to match you barrel diameter so the shroud still gets some support. link to video link to barrel sizer tool video…
This one have not been printed and tested but this one should work without any problem. if you like to be the cover photo of this one. then you can send a picture of your marker with the adapter to me thanks. bitchute movie link:…
This is the Front iron sight is made for the TMC STG 44 shroud. https://www.thingiverse.com/thing:3786684 link to Video link to barrel sizer tool video _UPDATES__ 13-10-2019 I have noticed that 7/8 barrels are not made the same... so it…
with this adapter you can use TMC mags in the MCS hurricane. I also introduced a anti ball drop system this is a tricky thing yo install but I will show this in a future video or documentation parts needed for that system is a small pies…
there are more TMC magazine winders out there. but this one is made to work for a dual mag setup. link to video Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Resolution: 0.2mm Infill: 40% Filament: Jupiter PETG…
Fan duct and matching fan grille for mounting a fan directly above a MKS GEN_L board. When used with a thin fan (8010), the design fits right inside the JGAurora A5 with enough headroom for the Y-axis gantry to pass over. Required parts:…
with this adapter you can use TMC mags in the MCS BOLT and Blizzard. I also introduced a anti ball drop system this is a tricky thing yo install but I will show this in a future video or documentation parts needed for that system is a…
keep in mind you need a plug to close off the air supply form your cyclone feed. otherwise you will have a air leak. and of course you still need a spring and 2 pins to complete the mag release note: these have been tested on X7 classic…
It works really well. The magazines insert very easy. But I’m not a 100% happy with the design jet. So at first did I not wanted to share it jet. But well it works so why not, I need to work a bit more on Freecad skills before I get to be…
A compact enclosure for mounting the OpenFFBoard controller and TMC Driver to the MiGE 130ST-10010 motor frame.
so as you could see the this is getting quite long. so this would not be for every one and you can ad a extra bolt to it to make it stronger link to the video there is also a Drop down buffertube avalable…
Automation for TMC reef roller. Automatically moves the filter fleece when the water level reaches the set level. What you need: Piece of PVC-U pipe 32mm Printed parts Motor with gearbox approx. 10-30 rpm, 25mm diameter Float switch…
TMC HP Elite Mini 600 Hold Mk2 Tight stand to make your HP Elite Mini 600 series to stay vertically oriented. I suggest to use rubber pads to prevent sliding. No support needed, tested with the .20 Speed profile, Aurapol PET-G, Pruasment…
I wanted a basic mount for my drivers from Adafruit to keep them from shorting on random stuff on my desk. There wasn't one online. I made one. STEP file attached if you want to tweak it. Not affiliated with Adafruit. Basic mounts for the…
this rail kit will make it possible to use the FGC-68TMC shrouds on your TMC. this are free floating shrouds so you can basically use any barrel thickness you like. making the TMC platform more flexible then with your stock TMC setup you…
I made this to go with https://www.printables.com/@TallBoy_436908 's BTT5160TplusMountVzBot.stl It uses 8xM3 heat inserts. Added a VZBot logo for my VZ330 build. If you would like a plain one let me know. Also made a shroud for just one…
Remixed to fit my Voron 2.4 250 mm with 2x TMC5160T Plus and Manta M8P V2.0 board.
his set is for lest say old school paintball markers. that will usually use a clamping elbow to attach a hopper to it. with this model can you directly attach the magfed adapter. for a cleaner look to finish the clamping part use a m3…
this Hi cap adapter does work. but you have to keep in mind that there is more of a chance for a mis feed. if there is something not right. since the mag haves to push 5 more paintballs up then normal. so it’s maybe pushing the limit of…
this the updated version. no mods needed. but keep in mind you need a plug to close off the air supply form your cyclone feed. otherwise you will have a air leak. and of course you still need a spring and 2 pins to complete the mag…
Why is this a thing? well I was curious if it could be done haha. and well 20 rounds in one go with your Tipx or TCR sounds good to me. and well you could use it so your backup and primary only uses 1 mag type. or bring the adapter with…
keep in mind you need a plug to close off the air supply form your cyclone feed. otherwise you will have a air leak. and of course you still need a spring and 2 pins to complete the mag release note: these have been tested on X7 classic…
this design was made thanks to my brother. I was showing him all the designs and I said I got every option covered! and he said well... where is the centered one so thank AK for this one. bitchute movie link:…
4/26/2020 Update: Shrunk download significantly by removing my build libraries, that was dumb, you need to build it anyway. Also tuned down mA on TMC2209's to 790 to eliminate layer shifting issues I was having. Ignore the calibration…
Layer Höhe: 0.08mm
Nachdem der Eggbot nun läuft, musste ich feststellen, das der "Druck" ziemlich zittrig ist. Erste Vermutung war, das die Mechanik "schwingt". Bei näherer Untersuchung kamen nun die Motortreiber in betracht. Also Lösung gesucht und…
this NO-RAil kit will make it possible to use the NORA FGC-68TMC shrouds on your TMC. this are free floating shrouds so you can basically use any barrel thickness you like. making the TMC platform more flexible then with your stock TMC…
this is a TMC adapter that works with the SAR12 marker. and yes I have not printed this thing out. but I did made a test fit of the part to make sure the mag adapter locks in place. and the magwel designs it self are tested. the only…
Pion pour le jeu de société Tu t’mets Combien ? Vous pouvez faire une pause a la couche 30 pour changer de filament et avoir un résultat bicolore. Pas besoin de supports ni de raft. Design de Esope sur Thingivers
this adapter it self holds 7 rounds in the feeding tube compared to the others that hold 3 or 4 paintballs. so this could help with tactical reloading in the sense that you waste less paint. bitchute movie link:…
bitchute movie link: https://www.bitchute.com/video/NZlRmetBmjad/ there are different models of this TMC magazines adapter. link to the Installation video of the T15 and TMC magfed adapter Update_ __ 23-05-2020 TMC MW MR V4 added there…
bitchute movie link: https://www.bitchute.com/video/NZlRmetBmjad/ https://www.youtube.com/watch?v=tkegaAAC0ws link to the Installation video of the T15 and TMC magfed adapter there are different models of this TMC magazines adapter.…
bitchute movie link: https://www.bitchute.com/video/NZlRmetBmjad/ https://www.youtube.com/watch?v=tkegaAAC0ws link to the Installation video of the T15 and TMC magfed adapter Update ** _ 23-05-2020 TMC MW MR V4 added there was a error in…
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and…
A simple mount to store your Tippmann TMC / Tippmann Stormer mags. A single and double version, the double compatible with the 'dual-mag' magazine. Recommend to print in PETG or stronger, for longevity. Print upright with supports as seen…
with this adapter you can use TMC mags in the MCS BOLT and Blizzard. I also introduced a anti ball drop system this is a tricky thing yo install but I will show this in a future video or documentation parts needed for that system is a…
A placeable component for the Bumbag Customizable Enclosure System . Find the product here . This model incorporates a modified version of the 3D model published by BIGTREETECH here .
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
with this adapter you can use TMC mags in the MCS hurricane. I also introduced a anti ball drop system this is a tricky thing yo install but I will show this in a future video or documentation parts needed for that system is a small pies…
All credit to Phantom16361 for the original design. There was a slight error in the hole placement of the 5160 Plus mounts. The picture with the bracket in blue is the original hole spacing. The one showing the yellow/tan color bracket is…
This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…
For use with fan 4020 and TMC2209 Print Settings Rafts: No Supports: No Resolution: 0.16 Infill: 25 Filament: Bembird ABS Black Category: 3D Printer Parts
Small mounting bracket to cool a tmc 5160 plus Hardware 8 M3x10mm 6010 axial fan Submit feature requests here!
this is a TMC adapter that works with the SAR12 marker. it also got the anti ball drop build in. so when you shoot your mag empty it will not drop te 2 last rounds that could not be fed in the chamber by the magazine and yes I have not…
Stepper Motor Driver TMC2208 V3.0, A4988, DRV8825 Control Extension Shield Board
This is a simple insert to hold everything for TTMC, as well as a section designed to fit meeples I bought from a local board game store. The clips are used to hold the part of the board that is part of the magnetic lip that closes the…
This has nothing to do with the performance of stepper motors, it just optimising some values in TMC config for quieter motors that doesn't heat that much. Temp of the motors went down around 10C and I can hold them after 10h print.…
I'm running the XY motors on my Annex Engineering K3 at 48V, and I'm using BTT's external TMC 5160s (TMC5160T Plus) as the stepper drivers. I needed to mount them, and specifically, I needed enough room for an Octopus Pro (mounted…
I installed Klipper on my Anycubic Predator, then built an air duct to cool the SKR-Rat's TMCs. I also added a thermistor to control and adjust the 40mm fan speed based on temperature. The model is designed for the Biqu SKR-Rat, but it…
This model is a replacement for the original chip tray of a metal band saw. The band saw is sold under different brand names, e.g. Bernado EBS100S Optimum S100G BS-100 Small Sawing Machine Portable Metal Band Saw Machine Movable TTMC…
Because I needed a model of the TMC 5160 Plus stepper driver from Mellow 3D, but couldn't find one, I decided to model it. Enjoy! Link to Mellow's doc for the driver can be found here .
This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…
Toilet breaks at the most inconvenient time and this toilet is in use everyday , what I found was the original impeller had cracked in half , so jumped on the design tools and drew up a replacement , printed in PETG has been working now…
I made/used it so that i could screw the motor drivers onto a wooden board without the solder joints pressing into the wood. It also raised the drivers slightly so that they were protected from moisture on the board The open side should…
The handle makes it easier to turn the water on and off with less force in your hand.
Vertical or gorizontal mount for this external Driver. Based on Fabian spring din rail mount. Between holes 52.5 mm. Extra - 50 mm fan mount. Optimized for print without supports.
