Counting matching models…
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
This is a remix from DavVvEs design from here: https://www.thingiverse.com/thing:3950437 My changes: - cut in 2 halfs to make it printable without to much supports - added “thick axes” so the spoke rims will hold the 3mf & gcode contains…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
This Slim Silica Box is for the AMS Hydra Mod, but it also works perfectly with the standard AMS.
This model uses 22 links, 22 covers, 1 end, and 1 start. I printed mine from PLA. Some supports are needed on the start and end. This chain clips into the aluminum extrusion under the printer just like the existing wire managers. Thread…
This part was originally on thingiverse. I will move it here as the site had problems with stability and spam. Feel free to browse the comments and makes here . This is a custom hotend duct, which uses the stock fans and improves part…
A stackable calibration cat. Maintains the calibration dimensions from the original. Includes three versions: Stacktocat - Has smaller, wider ears and stacks with itself. Adaptocat - Narrower feet to fit on top of original Cali Cat, but…
Remix to add a handle to the lid. Had to shorten the box to accommodate the lid so you will lose some volume. Includes versions for the rectangular and round hygrometer. Link for rectangular hygrometer:…
Very detailed instructions can be found in the PDF file under “Other Files”.
UPDATED 5-7-2023 7:10PM PDT: Updated to include the missing shorty version: Neptune 3 Pro Shorty Shroud -5015 Fan.stl UPDATED 5-7-2023 10:30AM PDT: Now supports ADXL345 accelerometers. Updated the two shrouds and two fronts to have mount…
I was looking for a fully 3D printed AR style butt stock, but couldn't find a decent option that I liked. So, I designed this one. I hope you like it. It fits on a standard mil-spec buffer tube, and it also fits on my own designed buffer…
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
AutoCoupler Cutaway educational model of an automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Original Auto Coupler Check out the Dragon Railway ecosystem! Join our : Discord If…
Custom Blaster Sniper Scope Blaster Removable Stock Blaster Reflex Scope 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
this is a nerf stock that fits in a 220 by 220 by 250 3d printer and works with most nerf guns.
English version follows. Stavebnice modulární pažby pro vzduchovky Artemis (SPA/SMK) CP-2 a CP-1 (též Diana Chaser, Bandit). Oproti originálu nabízí (subjektivně) lepší ergonomii, nastavitelnou a vyměnitelnou pistolovou rukojeť, lícnici a…
For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…
Highly detailed readme is included. It contains everything you are looking for. Make sure you read it. Currently only works with the 3.0 bug a salt models. A 2.5 and earlier version is in the works. 05/09/24
Mount Mellow UTOC or U2C to DIN using this PCB DIN Clip . Attach mount to PCB DIN Clip with 2 M2 or M2.5 self tapping screws Attach UTOC or U2C to mount using 2 or 4 M3 x 6mm or 8mm
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
20-5-2024 parts have been updated for a better parts fit _________________________ Compatible with both the FGC6 MKI and MKII models (SF bolt checked: works with the SF bolt ) this butt stock is adjustable to a size from 220mm to 295mm.…
This fan duct works well and this is the second iteration. I am currently testing a 3rd to see if it works better.
UPDATE 19 Feb 2023: A new toolhead cable is required when using the X1 cable chain. It will be available at the Bambu Lab store soon. (will update when it's available) When you install this bracket will only require the cable chain and…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Magnetic Gunstock for Oculus Quest 2 (Improved & Simplified) After printing three of these for friends I decided to improve a few issues I found and greatly simplify the process for others. Most of the source models have disparate and…
Joe Cool and Woodstock wall art. 0.2mm, PLA, Sovol SV01
I made a estoc for dummy 13, may or may not be accurate.
VR Gunstock by Sanlaki ( Standard version ). Link for parts (magnets, pipes, etc...) are on the TXT file on download page. Why I designed this VR gunstock: One of the main problems I had with other gun stocks in the market is "panic…
To build one, you need Attachment print (either pic center or hole center) Stock (m3, m3 w/ heatset, or 4-40 x 3/8 screws) in either normal or short lengths Matching buttplate to the stock chosen 2x 10-32 nuts (Imperial Mounting) or 2x M5…
-Display frame (stand) for your kpop photocards. -Plain version without any text to display other cards such as Pokémon, etc. is also downloadable. -It can be printed in one piece standing up (I recommend using organic supports) or lying…
This is a remix of the Honeycomb Stratocaster Body by Smadoo which itself is a remix of the Honeycomb Stratocaster Body by Conceptor. The design from Smadoo sadly was to big for my Prusa Mini so I redesigned it to fit my printer and went…
A simple and intuitive VR gunstock for Meta Quest 2 and 3 controllers. Can be made left or right handed by simply swapping the order of the controller cups. Designed as a simple and sturdy model that is easy to assemble and doesn't snap…
Intro This is my first 3D model so pardon me for any mistake. I have included the f3d files so you guys can remix it however you want, like make it for a bambino portafilter :) This current model should support all E61 group head…
WARNING if you glue in the hexa cup magnets make sure both magnets are physically attached to each other before you apply glue inside the recess and lovering the the top controller holder onto the base. DONT glue the magnets into both…
20-5-2024 parts have been updated for a better parts fit _________________________ Compatible with both the FGC6 MKI and MKII models (SF bolt checked: works with the SF bolt ) this adjustable butt stock is compatible with the MKI version…
After watching my nephew attempt to build his own race track for his hot wheel monster truck at the beach, I decided to help him out with a few designs to make his own track. 180 Bank Ramp/Jump Rumble Bumps Haven't been able to test on…
This tool guides a threading die with the tailstock on a lathe. It consists of a 3D-printed handle with a large knurled section for a good grip and individual, swappable die holders. What you get: 3D files (.f3d, .step, .3mf, .stl) of all…
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
This is the second version of my Voronoi Stratocaster. The files for the first one have been lost, so we will pick up here! This second version fixes several issues with the first. Many of the dimensions were changed to work better,…
Material: PLA Printing speed 100mm/s Nozzle temp 215 Bed temp 60 Support No Plate adhesion No 15% filling
After printing, this roller can be used to create a knit pattern on a soft material (like clay). I printed with PLA defaults (2 perimeters, 15% infill), a 0.4mm nozzle, and 0.15mm layers.
A highly detailed model of the famous Fender Stratocaster.
I've been using Sanlaki's gunstock design with my quest 1 for a couple of years and recently upgrades to the Quest 3. Since it has redesigned controllers, I needed to modify the original design. These fit the Quest 3 controllers and are…
Klemme bzw. Mini Schraubstock für kleinere feinere Arbeitenn.
This model is a remix of previous fantastic works, it fits the corners of the AMS to be able to hold a bit more dessicant inside the machine, it also has a matching lid with handles and a matching funnel. All has been adjusted in size…
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
This is the complete assembly to the best of my abilities of the original KE. I do not have a KE to verify the assembly 1:1 but it should match the model as the parts have been confirmed to work. Original Links: Open source Ender 3 V3 SE…
I made this model so I can mount a BTT u2C to my klipperized Anycubic Chiron. This will work with just about anything, though. I now have it installed on the Chiron, a modified VzBot, a ratrig Vcore 3.1, and a Voron 2.4. It uses 2 screws…
I ran against time to also present this other project: my Fender Stratocaster Squire from the 90's; a iconic, evergreen guitar. I hope you enjoy printing and assembling it; above all I hope it can be printed and assembled well , since I…
20-5-2024 parts have been updated for a better parts fit _________________________ the butt stocks it self are Compatible with both the FGC6 MKI and MKII models but the buffer tube is only for the Stingray model
UPDATE (2026. 08. 16) : I’ve uploaded a new version of the box designed for a 40×40 mm fan. This is the only change compared to the original version. E3V2-MantaE3EZ-BOX-poly-40x40.stl I mportant information about the E3V2 - Manta E3 EZ -…
This is only possible thanks to all of my present and past patreon supporter. So a huge shout-out to them!!! ------ Full model is on my https://patreon.com/squirrelf3d - linear rail version - many supported hotend ( list here ) - some…
The handle is suitable for any weapon with this finish. Here installed on a Nerf Commander elite 2.0 , an economical solution to get an over-equipped nerf by paying only a small sum! (only 299 kcz here ) The model prints with a support,…
I tried to improve koobysnacks77( https://www.thingiverse.com/thing:2335510) already awesome stock design. The sling mounting option on the sides cant be done after the real steel version on the AEG version because of the battery chamber,…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
This is the Cam Pipe Clamp fixture from the Supplementary Material of Koyama et al.'s paper "AutoConnect: Computational Design of 3D-Printable Connectors" https://koyama.xyz/project/AutoConnect/autoconnect.pdf…
I tried finding the stock one that would fit the opposite side of the spoolmount but in avail, so i decided to just model it quickly and share it
Improve your cooling for free based on the popular Booty Burner! Improve vision with integrated nozzle LEDs Can be printed without the part cooler fan installed (if you broke your original) Alternatively you can get it printed in high…
Behold the ultimate mashup of music and miniatures – a Funko-style Marshmello model that’s ready to drop beats on your shelf! This quirky 3D print captures Marshmello’s signature look with an oversized head, minimalist mask, and a playful…
Lates update 27/07/25 Three air outlets (beta): a central duct has been added to complement the two classic side outlets, providing direct cooling to the nozzle and improved wraparound airflow on the printed part. Designed exclusively for…
While "shorty" or “grip only” versions of the Winchester 1887 are somewhat common, the Winchester 1887 was, from the factory, available with full stock. While there were various different styles over time, I chose to model my stock mostly…
I've fused a Glock model with a redesigned Quest 3 gun stock to create a cool VR mod (links below). In most shooter VR games, precision and flexibility are key. My design allows quick switching between free-hand movement and a locked,…
3D scan file of motocross helmet scaled to 1/10 of the original. There are some faults in the file, especially in the bottom edge and under the sun visor, but it is still perfectly usable for RC-buggy driver etc.
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
AKM scale model in 1/6 size Features: Working charging handle, removable magazine, folding stock Items required: Ballpoint pen spring, Piece of filament as a pin for the stock and mechanism Print settings PLA 200c, Bed temp 60, auto…
This a drop-in replacement part for the K1 extruder cover. It's compatible with all versions of the extruder (V1, V2, V3). I have made this cover because I wanted to be able to upgrade the extruder V1 and V2 with the most interesting…
Valorant protocol 781 knife. Scale to your need, share your makes and i like trains . ''GAIA'S VENGEANCE MELEE VALORANT'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not…
For this one go WHITE - BLACK - YELLOW! Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move…
I printed in PLA. I would use supports next time.
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…
This is a light remix of the Honeycomb Stratocaster Body by Conceptor. ( https://www.thingiverse.com/thing:3174465 ) I resliced the body into 9 pieces rather than the original 6 so that there is only 1 seam under the strings where the…
Eine kleine Anleitung befindet sich bei den Downloads. Kann auch mit kleineren 3D Drucker gedruckt werden. Viel Spaß :D A small guide is located in the downloads. Can also be printed with smaller 3D printers. Have fun :D
Update: Stronger V2 Head design and ability to install without moving the ABL Sensor! I really liked how Maker Hangtight " https://www.thingiverse.com/thing:3179892 " designed this hotend & duct and wanted it for my Anycubic Kobra Go.…
Made to fit a 40mm vacuum hose to an unmodified Hose Fitting from @PeterH's “Camlock Connectors with Magnetic Catch”. At the fitting side it screws in easily, at the hose side it is a bit more snug. If it is too snug, use the Offset Face…
NEW!!! UPDATED! ADDED SEALED FRONT AND REAR BETWEENERS! CREALITY K1C SLIM HINGED RISER USES STOCK HARDWARE SLIM, LESS TO NO DAMAGE! AND NOISE FROM PRINT HEAD CRASHING INTO THE R/F (camera) CORNER DOES NOT HIT NOWHERE NEAR AS HARD AS ANY…
An adorable kitten peeking out of a Christmas stocking, perfect for 3D printing festive decorations and ornaments!
This is an addon for your stock OEM Spool Holder. Allows you to easily add a filament runout sensor. Was made with tight fitment so would not slip during use without using the tightener bolt hole on the side. Just added it as an extra…
<BRB> Motocross | Motorcycle - Keychain
Model fix so you can print them with any orientation without slicing errors
UPDATE: Added a 1mm more clearance version. UPDATE: I have added a model for a “regular” 5015 fan. This model has internal ducting to help with the small fan outlet. UPDATE: Added 1mm more clearance version to "regular" 5015 alternative…
This is a stock for an Artemis CP2 airgun. Use M5 screws, and 3d printer threaded rods T8 / 2 for the big ones. T8/2 are 5 cm , except the bottom one 10 cm For the wheels, there's 2 types (you choose) : you can print the threads, or…
This needs 2x M3x6mm SHCS and 2x M3 nuts, print all parts without supports. Press the M3 nuts into the inside of the stock point, then screw the SHCS through the picatinny, through the stock point and into the nuts. This attaches to the…
I wanted a riser for my K1C which would allow me to secure the corners using the M3x8 screws which already support the printer lid. I modified the Creality K1/K1C Hinged Riser corners to allow me to do this. Features No supports required…
Since I didn't find a gunstock that I liked, I made my own and I'm sharing it with you, I hope you like it! PRINT AT 100% (It is recommended to put a rubber band where the joystick grips so that it does not slide.) Any donation through…
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Raider stock. I love the look and feel of the Raider stock, and I thought it would be fun to model the stock in case I ever wanted to…
Simple centerfinder for round stock. Shank diameter is 10mm. You will need a short M4 bolt.
Mit dieser neuen Version von meinem beliebten Zollstockanschlag ist es nun möglich nicht nur das erste Glied zu nutzen, sondern alle weiteren auch, da er sich nun über das Gelenk drüber schieben lässt. Der Anschlag ist ergonomisch geformt…
Kp3s is a lovely printer but it is alarming how bad the firmwares found on the internet are - even the one from official website.. So I have decided to upload this marlin config for kp3s v3.. Because every config found on the internet is…
Summary This is a case for an Einsy Rambo Board with room for a Raspberry Pi 3b/b+/4 and buck converter that fits the stock MK3(S) frame. Supports connecting Pi via USB or GPIO. Supports wiring for MMU2. BEAR frame version:…
Motocross helmet found on Thingiverse, uploaded here for make points.
Hello all! I present to you “The Fanducstein”, a dual wing fan duct prototype based on the parts Sovol released. I just tried to maximise the air pressure over the nozzle instead of the travel it does, also, the central part has been…
The source marked this model as adult content.
Ender 3 V2 Stealthburner V2 I've modified the ABS mount to be one piece instead of two. And Its assembly should be pretty straightforward. The hole gantry does not need to be dismounted. Or the Heatsink. Just put it on top and secure it…
Update 09/18/2024: See V1.2 for the latest release. Includes original files as well as additional versions: https://www.printables.com/model/1011612 Also see for Carbon Folder mod: https://www.printables.com/model/1011626 Duplex Folding…
