Counting matching models…
Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…
Print approx. €8.93–€10.91 excl. taxPreliminary estimate for PETGSource material: PET
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Support me & Join Printables Club The lamp consists of several parts. The printed parts are Flame, Stick, Holder, and Nut. Flame and Stick consist of several parts that need to be glued together. For the pixelization effect, it is…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing
Print approx. €9.15–€11.18 excl. taxPreliminary estimate for PETGSource material: PET
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Scarfring or neckerchief based in a Cute Beaver. Pasa pañuelo de adorable castor para scouts, lobatos y castorcitos
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Porte clé moto, prêt pour la saison… Bonne impression et surtout bonne route, soyez prudent! ✅ 5 Johann ZARCO ✅ 20 Fabio QUARTARARO ✅ 46 Valentino ROSSI ✅ 63 Francesco BAGNAIA ✅ 93 Marc MARQUEZ Si vous aimeriez un autre pilote dites-le…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
I bought an Atorch DL24 to do some load testing on the mess of USB cables I have. I think it will also come in handy for other projects. It's a pretty nice piece of equipment, but I'd much prefer to keep my mitts off the PCBA. So this…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…
Print approx. €7.56–€9.24 excl. taxPreliminary estimate for PETGSource material: PET
This Motorcycle puzzle was originally a woodworking project of my brother in law (as shown in the picture with the red details). I took the original and made a drawing as an SVG file. With Fusion 360 I created a 3D model. The black parts…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
I also added a version with a support ring base, which will give you a lot more stability.
Print approx. €3.81–€4.66 excl. taxPreliminary estimate for one variant
So this is the first prototype of my fully 3D printed motorcycle chain cleaner. Brushes and straps are printed in flexible materil (i use basic TPU) for the body i used Prusament PETG. I will upload new iterations as i develop them.
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for PETGSource material: PET
The model is designed to house an apple AirTag, with a screw in top (cap) and an o-ring for water tightness. I'm also including the fusion 360 file for anyone to make an easy remix there. Printing recommendations Printing the base and top…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Simple, wall mount, torch style lamp for GU-10 LED bulbs. The torch is tilted by 30° to mainly illuminate the ceiling, giving the room a nice ambient light. The glass scatters some of the light and creates an eye catching spot on the…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
Got the medallion by pwmodder 2017 on thingiverse, files here: https://www.thingiverse.com/thing:3740645 the cover was made for HD Twin Cam engines, test rode it one afternoon, did not melt down
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
These are motorcycle mirror extensions with presets to extend mirrors outwards by 1-5/8" and upwards (raised) by 1-3/8". There are two presets: one for use with M10 threaded inserts and the other for direct use with M10 bolts. The model…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for PETGSource material: PET
Ikea Skadis torchlight holder for : https://amz.run/5cmE https://amz.run/5cmF Print setting: Print in PLA With support
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix for Aprilia RSV motorcycle fans Phone stand: v1-1 is suitable for devices with a total thickness up to 10mm v2-1 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for:…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Please leave a follow and like! Supports are needed and a brim is optional, but recommended. Thank you for printing!!!
Print approx. €12.41–€15.16 excl. taxPreliminary estimate for one variant
Norton motorcycles logo, prints in 2 colors and I added a meshin hte center with the modifier tool.
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
old cover broke out after 12 yrs in service, so I made a new one in TPU
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Three colors timer cover. The print files has two pauses for filament color change already included. Following the print I sanded it then I applied two layers each of primer for plastic and transparent paint. I made others timer cover in…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
These are bar ends for Honda motorcycles. I created them after having my CB300R grips replaced with Koso Apollo heated grips. The Koso grips are 8mm longer than the stock grips, causing my bar end weights to no longer fit. Bar ends should…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
Long Story short! I have learned a neat trick from a Master painter years ago, to make perfect circles with a Cardboard strip with 2 holes. So i thought why not design one? The storc Compass is a simple tool, to make quick circles (it is…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
This is a remix for TRIUMPH motorcycle fans Phone stand: v1-2 is suitable for devices with a total thickness up to 10mm v2-2 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for: rubber…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
8 Bit Atari MotorCycle
Print approx. €6.40–€7.82 excl. taxPreliminary estimate for one variant
These are parametric plugs for motorcycle frames. I've included presets for the Honda CB300R chassis and pillion holders. The frame plugs require a 20mm stem, but the left and right pillion holders are asymmetric: the left plug requires a…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Print instructions Print Settings ============== Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution : 0.3 Infill: 99% Filament : Devil Design PET Notes: You can use other material if you want Standard for 0.4…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for PETGSource material: PET
The original holder included with this navigation system did not suit me, because I thought the navigation system protruded too far forward and was either too high or too low. That's why I created this simple mount that held my navigation…
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for one variant
Changelog 2022-08-23 v1.01 increased infill and perimeters for all caps 2022-08-21 v1.0 initial public release Please note: I have intended my models to be free of cost for the community, fun to print and a joy to use. Sadly, some…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
These pieces will allow you to run the KTM headlight (I believe the year range is 2017-2022 on this style KTM mask) on Alta motorcycles already using the KTM front fender fitted to the stock Alta triple clamps. Also allows MX and MXR's to…
Print approx. €6.67–€8.16 excl. taxPreliminary estimate for PETGSource material: PET
These are spacers for Honda motorcycle bar end weights. I created them after having my CB300R grips replaced with Koso Apollo heated grips. The Koso grips are 8mm longer than the stock grips, causing my bar end weights to no longer fit. I…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Replacement tiki torch cap to snuff out the flame and keep wick dry. Printed in PETG since it's outside - no supports needed.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
A little Toyota Supra name plate for the amazing Motorcycle Roller Chain Key Ring from Bootjevaarder: https://www.printables.com/de/model/180357-motorcycle-roller-chain-key-ring A Toyota Supra is not a motorcycle, but I wanted to gift the…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: this is not currently flying. I am going to totally redesign it optimized for a better power to weight ratio sometime in the future. This is my submission for the “Make it Fly” contest. It is powered by a total of 60 large…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Ikea Ljusa [yoo:sa], which means bright in swedish (adjective of bright) has an annoying crank handle without rotating crank knob. The handle is just one peace of molded plastic! Ljusa is a flashlight with hand crank generator (step…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
WoW-Fackel / Torch Modell einer Fackel im Stil von World of Warcraft Gedruckt auf Prusa MK4 und Bambu P1S Mit PLA und PLA Translucent Support: ja, organisch, auf Druckbett Scaling: ja Wände: 4 Infill: 5–15 % je nach gewünschter Stabilität…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
This is a spacer for the cross bar behind the windshield of a Yamaha Tenere 700 motorcycle. It steps down from the smallest diameter that comes with the Peak Design motorcycle phone mount to the cross bar diameter. I know it's a simple…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
To support 2 HD battery tenders, side wire hangers are present to store cables when not in use
Print approx. €8.07–€9.86 excl. taxPreliminary estimate for PETGSource material: PET
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
The original knob cracked and would spin on the shaft. -Original Knob The replacement knob uses a M4 x 10mm bolt and nut to secure the knob to the flat part of the shaft. Also made larger grips on the side of the knob.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
A little FENDT name plate for the amazing Motorcycle Roller Chain Key Ring from Bootjevaarder: https://www.printables.com/de/model/180357-motorcycle-roller-chain-key-ring As far as I know FENDT never built motorcycles , but I wanted to…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Just got tired of knocking my vapes over and seemed like a nice simple first design. Hope it serves others as well! The g-code included is set for 3 perimeters as a test vs my previous version. Not sure yet if it matters not doing just 2.…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Diana Stormrider torch brace A little brace to hold a small led torch to the gun. It happens to point exactly in the right spot. Even when the torch is on maximum focus. Accepts M5 bolts. Print Settings Printer Brand: Prusa Printer: i3…
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Needed a "flying" motorcycle for a gift. Remix of original keychain model (https://www.thingiverse.com/thing:3269672) split and duplicated in TinkerCAD for some extra detail then modified the wheels for some "bling". ZOOM!
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
Motorcycle Grip
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for one variant
Needed somewhere to store my torch nearby the printers. It's always needed to clean up any string or fuzz off my 3d prints. Lexivon makes the best one I could find to fit my needs. It has an ignitor, but it doesn't work that reliably so I…
Print approx. €7.91–€9.67 excl. taxPreliminary estimate for one variant
motorcyclist figure, easy print, support needed :)
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
The Molle for all Enduro and travel enthusiasts motorcycle rider. Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG / PLA Supporting Material none Comments printed on MK4S with MMU3…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
A while back, a friend of a friend asked me to make him a clip for his motorcycle boot to replace a broken one. They sent me pictures and measurements and I recreated it in Fusion 360. I made a few in ABS and ASA. It is a quick print, but…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Allows a 14.1 oz "Bernzomatic" gas cylinder to firmly stand upright with a torch attached.
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
When driving on the reace track, gloves get pretty damp and putting them back after a break is always a struggle. The goal of this contraption is to allow to have a good flow of air on your gloves, allowing them to dry before your next…
Print approx. €3.66–€4.48 excl. taxPreliminary estimate for PETGSource material: PET
Multipart belt holster I modeled for a friend. It have space for torch-taser combo(Police 80000W), DEWALT folding pocket knife (DWHT10313) and carabine utility blade knife . Belt parts are held together by 4x M3x20 screws, you also may be…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
I had a LED Light Hat torch of Xcap brand, with damaged battery which had laid useless in my drawer. I thought it cold be usefull if I design a little torch with this LED light. This LED head produces difused light which could be…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Holder for a small torch
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Simple and stable battery operated work torch for Parkside or Makita cordless tools. The flashlight itself consists of two printed parts : the battery holder (available for Parkside and Makita batteries) is compatible with a large number…
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for one variant
A mount for a Michelin motorcycle tyre pressure monitor / gauge The clip is a separate part so it can be made to fit different circumferences. Fusion file for the clip included. Print instructions Category: Automotive Summary A mount for…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
Print in white, change filament to black at 4.2 mm, attach with 2 M5 bols/nut/washer to standard plate holder printed in PETG for better temperature resistance, using Prusament. Used 4 perimeters to make it extra sturdy
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
This is a protective Orca Torch battery case I designed to prevent spare batteries from touching each other and causing when traveling by airplane. It fits the D530 and D530V flashlight batteries. I printed it with PETG but I'm sure other…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
My son wanted to pimp his motorcycle by adding an additional set of lights. On top of that each light would be pimped as well by adding a LED Halo. This model combines the following functions: A holder for the LED Halo (no glue required…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
A simple, high density print side-stand ground plate to improve stability on soft or loose ground. Two variants, one with studs, ideal for gravel or soft ground, one without studs as a general stability improvement. Printed in PETG with a…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for PETGSource material: PET
I needed a Front Brake hold for when loading my motorcycle on a trailer, so designed this. Printed in PETG.
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
to install 2 Sena Freewire inside the tourpack. an additional tie-rap is needed to secure the installation on the right speaker grid. once in place the installation is solid and secure. Print instructions I selected "support everywhere"…
Print approx. €6.76–€8.26 excl. taxPreliminary estimate for PETGSource material: PET
I secured my bags against movement with these tension belt mounts. Tested on a 3 week offroad morocco trip without any issues. The outer diameter of the crashbar is 20,3 mm (0.8 inches). The screws used are M6x20 and a locknut. I…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Tent Lantern is what you always needed on your camping, but you didn't know it before today. It turns your torch (flashlight or headlamp) from sharp and pointing into a diffused, cozy light source illuminating everything around. You can…
Print approx. €9.06–€11.08 excl. taxPreliminary estimate for one variant
Guide attaches to the rear fender (3M double sided tape used in pictures) to guide and support a dune safety flag on an Alta Redshift motorcycle. Curvature made to match the contour of the rear fender in the approximate position shown in…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
A simple square design porch light, it uses two 3V LED filaments that can be pushed up to 1 W each, i recommend 1 W for both together. It's powered by a small adjustable DC-DC converter (3-15V IN, 1-15V OUT) so a wide input can be used to…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
Made this by free-handing some splines in OnShape after my heavy a$$ jacket started pulling my old coat hanger out of the wall. Printed a test-quality piece first so I could make sure it would fit (file attached,) then beefed it up with…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
UPDATED! - Inset Letters that fit nicely in the backplate recesses. See ATKLogo-Bevel-Updated-Inset-Letters.3mf I have a 1994 ATK 604 ESDS that needs a logo on it's fuel tank. I have an OEM sticker, but don't really want to put that on…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Motorcycle rearview cap M10 left thread and M6. Create the possibility to close the hole of the originale mirror on your bike with a screw. I suggest to glue the insert on a screw, then screw them in the hole of the mirror.
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Tough Hook mount to Motorcycle Helmet Hook (Love my Tough Hook) https://a.co/d/5RDsxH3 Here is the Helmet Hook HEAD that will mount to this. https://www.printables.com/model/1354553-motorcycle-helmet-hook-head-shaped-kind-of Printing…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm
General Another keyring for gearheads! Pick your motorcycle brand and engine configuration. Print the roller chain, the sprocket holder and the name plate/configuration plate in your favourite color(s). Printing I printed the model on a…
Pick your motorcycle brand and engine configuration. Then print the two key ring halves and dowels of your choise in your favourite color(s). Glue the dowels in one halve, and glue the two halves together. Ride safely! Related Model…
One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…
Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…
The Fieseler Fi 156 Storch (Stork) was an unarmed liason aircraft produced in Germany before and during World War II, noted for its superb STOL capabilities. It would later be produced and flown by the French until 1970. I tried my best…
Design from https://www.thingiverse.com/thing:2504368 I have added supports - download slicer project in files. Printed in PLA - 0,2mm with 10% infill. It is very sturdy.
A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…
Tisk je velmi jednoduchý. Pevnost je dostatečná z PLA, ale můžete klidně použít PETG. Tisk vrstvy 0,2-0,28. Tyto dva soubory jsou rozdílné pouze v otvorech na vruty, kde jeden je na plochou hlavu vrutu a druhý na zkosenou hlavu vrutu.
No Supports > 35% Best in TPU (more confortable)
2024-06-10: fixed scaling issue Assembly: 3x Pin 6x Cage pillar 2x Cage circle 2x Arm sock 1x Everything else Tube shaped USB battery less than 27mm in diameter. LED flame lightbulb. 5v to whatever LED bulb requires buck converter. Mini…
I wanted to do more to show the potential of the Mini 13 frame and how you can use it to make more than just awesome 3.5" action figures so I made a motorcycle for Lucky/Mini 13 that is built on the Mini 13 frame. On top of downloading…
Hang your helmet on the wall for easy storage. Securely holds in either direction. Print in any material with 3 perimeters and 15% infill with supports.
Kaneda’s bike - Akira motorcycle. Akira is a 1988 Japanese animated post-apocalyptic cyberpunk action film directed by Katsuhiro Otomo, produced by Ryōhei Suzuki and Shunzō Katō, and written by Otomo and Izo Hashimoto, based on Otomo's…
I liked the idea of a hubless motorcycle, so this is what I came up with... of course there are no handlebars to steer... erm that would ruin the look :-) The wheels do spin though and it is print-in-place, so no supports required :-)…
