Counting matching models…
For better seating …. V2.1 Small Clamp has been reinforced
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
Added a tab to to the Rotary.stl to mount the filament sensor to the guide.
Any one who was born in the early 80's rember the day when SONY released is first Walkman : the TPS L2 . Easily recognizable with its blue and orange colors, this cassette reader was as revolutionary as the first iPhone was in 2003. This…
Remix mit einem längeren Schaft (31cm) und einem Loch für M4 Gewindeeinsatz.
Damit man diesen klasse designten Halter für Rasierapparate mit auf Reisen nehmen kann, entwarf ich kurzerhand einen Deckel dafür. https://www.printables.com/de/model/523496-razor-holder Der Deckel sitzt ziemlich straff - somit kann er…
Einfach und schnell zu drucken. am besten in PETG Kein kleben kein support nötig 2x drucken !!! nicht spiegeln !!! Easy and quick to print. best in PETG No gluing, no support necessary print twice !!! do not mirror !! This is a small easy…
I designed this case that's inspired by visual futurist artist like Syd Mead and John Eaves. Not your typical boxy type case for a piece of audiophile equipment. This is meant to make it standalone and have a visual impact with futuristic…
Print in something that can take heat (i printed in ASA). TPS sensor mounting to the bracket: 7mm m4 nut and bolt combination TPS bracket mounting to the throttle body: m4 bolts with very wide m4 washers.
VELA DEL NACIEMIENTO LITOFANO, #CHRISTMASXCULTS https://cults3d.com/:1582995
Ho fatto questo modello stampato in PETG con un riempimento del 30%
This is a mostly parametric model for a CNC router bit holder. I'll publish the Cad file for it when I complete the parameter math. While the idea came from the remix parent, I designed it from scratch on FreeCad 20.2 printed on a…
Thingiverse part:https://www.thingiverse.com/thing:3154398 I made a completely new bracket to fit my ratrig vcore 3 and also filled in some gaps in the original part. I then added a new servo in Klipper and added a macro to run the…
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
@Patix made an awesome dirt bike. It needed a rider. Was printed at .2mm with PETG. Will need support where appropriate.
Some tunings to dc222's models. I've made 3 different category changes to some of the parts: Visual - just generic stuff that have only visual impact Technical - changes related to printing the parts Functional -changes related to the…
Craeen, better known on Youtube.com as OregonStateUSA created this last year. It is an elaborate puzzle box designed with a geared-up steampunk theme. You can spray paint the pieces or print them with metalli filament. Print instructions…
If you are not using the tps module, mirroring the left side should work fine. Same if you are using the tps module on the left side. Printed with the top of the case facing down the plate, supports for the tps cut and some of the holes…
Case for LogicAnalyzer from https://github.com/gusmanb/logicanalyzer Version 6. Threaded inserts from Ruthex M2.5 are used to fasten the lid. Case designed with FreeCAD.
ENG: Easy and quick to print. Best in PETG No gluing, no support necessary print twice !!! do not mirror !! This is a small easy to print platform extension for Merandey's bird feeder (print size 100% ) ----- GER: Einfach und schnell zu…
Box für https://www.printables.comdemodel547500-prusa-mk4-tool-holdercomments1391954 Box for https://www.printables.comdemodel547500-prusa-mk4-tool-holdercomments1391954
We have broken most of our Vex robotics crank handles, likely because of the torque the students frequently apply to them. This handle has a loose rotator that allows for high-speed cranking, and it's a slightly larger piece. It was…
Thanks to @PeterH for his "SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH" and accessories. Using the same principle I made this suction nozzle so I can quickly disconnect the suction from the dust shoe and connect it to the…
I have decreased the gap to 14mm (Asus G14 is 13.6mm wide original was 19.5mm ) Added a small hole to prevent blocking the fan exhaust Sand the bottom and add rubber pads or tape to make it more stable that's all or spray primer to make…
It's possible to print these in PLA using the same instructions found in the original model that this one remixes. But the keycaps in the pictures were printed using MJF and PA12-HP Nylon (dyed black) from JLCPCB.
I just rescaled it for a friend. Not printed it myself. https://www.thingiverse.com/thing:3154080
Printed the Reaper with Glow-In-The-Dark PLA, The Candle Holders are printed with PETG. Candles were Home-made scented candles. Size of Polycarbonate Containers : 38 mm x 12 mm
Blending classical sculpture aesthetics with contemporary street fashion, this unique Urban Renaissance Sculpture redefines modern collectible art. Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit…
Fit for "WypAll General Clean L30 Heavy Cleaning Towels" - makes functional use of 1" wooden dowel - see my YouTube video of this part in action: “LowRider v3 DIY CNC - Easy quick project - super satisfying!” I am including the SVG files…
Thank you Tomek for your idea to bolt bridge! I used this to modify another ukulele
VONT Flash Light Holder 2Video link https://youtu.be/Idu4CmVmfxc 7.50 mm X 50mm Wrist Mount.
Another model of a TPS adapter to use on a stock B230 throttlebody, my 14 year old bosch style TPS adapter was faulty due to trace or brush being worn inside of it, possibly also a very loose fit on this chinese made low priced unit. This…
The full scale model in .3mf or .stl: https://cults3d.com/en/3d-model/art/starship-tps Size: 121x139x17 mm I recommend you to use the following settings: Nozzle 0.4mm Layer height 0.2mm No supports 3 Wall Lines 3 Top and Bottom Layers…
For more information please check out the original: https://www.printables.com/model/1134180
Stampato in PERG con riempimento 40%
Print one normal one mirrored. The cover was made by Sacr3D Etching https://www.prusaprinters.org/de/prints/64576-mini-12864-screen-cover-and-brackets-for-bear-fram
I love the case design. I modified the notch to fit the rush hour puzzle by @InsertNameHer_211338 . Had to make the notch shorter and thinner. I also scaled to 106% so you can just print without modification to fit @InsertNameHer_211338…
Hallo, Ich habe für diesen Leuchturm ein neues Dach gemacht, damit es zu dem Leuchtfeuer passt was ich verwendet habe. hier der Link zu dem Leuchtfeuer…
Another TPS adapter among many, I came up with this for a minimal solution instead of the bulky ones out there. This does however require you to both shorten the throttle body butterfly axle/rod by the required amount your particular TPS…
Stopper for model https://www.printables.com/model/442943-modular-socket-organizer-complete-set/files 2 versions
Find out everything you need to know about the TAP WRENCH Edition on my blog: https://nerd-corner.com/3d-printed-tap-wrench-for-tap-m5-to-m12/
# Azoteq TPS43 Trackpad Holder for Corne V4 Pro Micro Edition (right half) A drop-in trackpad mount for the Corne V4 Pro Micro Edition (Kea Workshop PCB). It carries an Azoteq TPS43 capacitive trackpad (43 × 40 mm, IQS572) and bolts onto…
re-render of modern interpretation of vintage 1890s patented by C.C.Packard leaf shutter, remixed from published on flickr blow-up diagram. Used image to 3d model on Makerworld with export to .stl Powered by MakerWorld-Image-to-3D (…
A slim case for the TPS42 keyboard by Christoph Rehmann. The case in the pic was printed using matte white PLA at 0.2mm layer height on an Enter 3 Pro. Print the top parts upside down so that no support is required Mirror the left halve…
I just added the ability to mount it without a wall mounting bracket. You need a longer screwdriver for that. If you want to pre-drill, you have to remove all the other HIVES, otherwise the cordless screwdriver won't fit. Ich habe…
My drill press has a 65mm stand, so I made this adapter for the 72mm clamps.
I designed this frame around https://www.thingiverse.com/thing:3107137 . It has a small hole for hanging. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Proto-Pasta pla Daffodil Notes: the…
Designed a plastic shelf cap to support a radio on top of a Jetstream JTPS32MAB Power Supply. Printed it with PLA, and it has held up fine so far.
Extended XT60 PSU Cover with some more space for wiring and vents added for cooling to match PSU vents (S-600-24). Added option for click in switched/fused AC socket (or can cut out angled corner in slicer or with side cutters to go with…
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
I've modified the design compared to the first iteration that I installed on my car, so this should work fine, but I'm including the STEP file if it needs modified, since I don't want to go through the trouble of printing another and…
Ersatzsieb für gefunden auf Thingverse: https://www.thingiverse.com/thing:1642228 Das originale Sieb war/ist nur schwer zum Drucken, selbst mit 0,2 mm Düse hatte ich diverse Probleme. Das Teil geht prächtig zu drucken mit Cura auf meinen…
made a bracket and housing for my prector for use in my rv.
Added holes at the back for power in and screen out. Printed in PLA 0.2 layer height 4 walls with support everywhere(maybe not necessary?), top side down.
Changes to original: Outer walls width 1.6 mm for 0.4 mm nozzle print Inner wall width 0.8 mm for 0.4 mm nozzle print Solid outer walls Shortened ~5 mm to fit better into Eldricht Horror box Wall width is done inwards in order not to mess…
Import aus Thingiverse für Printables(https://www.thingiverse.com/robengineering)
24mm wide hook for 22mm crutches
https://www.thingiverse.com/thing:4715483/files with 24mm wide hook
5/15/2019 edited 1.5mm higher for more probe clearence, allowing room for shims for fine tuning. Wanted my 3dtouch closet to the nozzle so i came up with this location settings X= 8, Y= -28 Category: 3D Printer Parts
ABS, ASA I used 4 shells 40% infill .2 layer hieght
Import from Thingiverse for Printables - https://www.thingiverse.com/thing:51675
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
Designed for multi material (MMU) printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual property trading…
Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963
I scored a used Tektronix TPS2012 oscilloscope of the TPS2000 series (two isolated channels, battery operated). And of course the battery compartment cover was missing, as it is with most used units of that series. So I designed a…
I scored a used Tektronix TPS2012 oscilloscope of the TPS2000 series (two isolated channels, battery operated). And of course the BNC-Cover, which protects from the high voltages that this scope is capable of working with, was missing. So…
Add a touch of humor and personality to your home! With a purple base and bright yellow chicken feet, this eye-catching pink coaster will transform your speaker into a unique decorative element. Original, playful design.
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
Stopper for model https://www.printables.com/model/442943-modular-socket-organizer-complete-set/files 2 versions
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
A revolver holder for 44 vendetta r6
Air Duct Anycubic Kobra NEO V4 is slip on secure with glue. V5 has a hole for a 2.85 x 11mm screw.
Modified with Tinkercad and sliced with Cura
