Counting matching models…
Introducing the Trampler from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Lady and The Tramp Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
After getting a request to transform a design into a printable object I've created this trampoline. It's based on the design of Christopher Jeschke which had the smart idea to use a balloon as base part for the trampoline. I've optimized…
This model is my first attempt on Trampa hub. Mainly for street carving. If it proves functionnal (or if asked in the comments) I'll make an AT version with more crampons Leave comments if upgrades are required
Om dat mijn zoon last heeft van de Aziatische hoornaar liet hij mij een Aziatische hoornaars val zien met wat uitleg. Zo ben ik dan begonnen met te tekenen, en printen. De val kan maar begin volgend jaar getest worden. De aanvallen…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This design can be printed in 8 different pieces and glued together. I printed, sanded, and primed the parts before my wife hand-painted them. The models have small indentations for where each piece fits tightly in place. Most parts need…
The parts shown in the picture broke on my trampoline I modeled a replacement for everyone to use. Print settings don't matter almost at all, the part is made for 3d printing and should be printable with the vast majority of materials. I…
The key to the bouncy surface is to use this hack! Print Specifications Filament: PETG Specification Value Estimated Print Time (Ender-3 V2) 30 Minutes Filament Used 5.2 g Layer Height 0.16 mm Wall Thickness 5 perimeters Infill Density…
1.step: print Trampoline-guma Material - TPU Layer height - 0,2mm 2.step: print Trampoline-ram Material - PLA Layer height - 0,2mm IMPORTANT - stop on layer 19 and insert part “trampoline-guma”
Trampoline net holder. Designed for a 26mm pipe and a 6mm net holding ring. Print instructions Tested with PETG Resolution 0.2 mm Infill 80%
To protect the automower from be stuckt at the trampolin.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
print 3 pla parts (bottom part glue together)….. ten use flexi material for TPU file (you can play with infill for diferent flexibility)
A model trampoline currently is in a state that will not bounce.
Lego Army Trabant P601 Tramp 1976
I lost a few of the plastic spacers which are used to screw the net poles onto the main trampoline body over the last winter, so i decided to give it a go and print the replacements. They worked perfectly without for a compelte summer. I…
Hi, to download Handle Trampolines End Cap, the end caps are on the 25mm tube, I had to make new ones because the ones from the trampolines are falling apart, my are stronger :) Handle Trampolines End Cap is my project, printed and works…
The Virginian - Virginian (James Drury) and Trampas (Doug McClure) - 1962-1971 3D printable model.
Easy print nothing really to worry about. I also made a version with the radioactive symbol.
Our trampoline and the robotic lawn mower are not best friends. These brackets are designed to help them get along better. With the bracket installed on all edges of the trampolines w-shaped struts, the mower isn't lifted anymore.…
These spacers go between the Acon 16 trampoline legs and the net support poles. I broke and lost several when I was disassembling and moving the trampoline, and printed out some replacements. PRINTING I printed it in PETG with 70 percent…
Die Netzbefestigungen bei unserem Trampolin waren von der Sonne ganz brüchig geworden und zu einem Großen Teil schon defekt. Ich habe diese gezeichnet und ausgedruckt. Jetzt ist das Netz wieder fest und sicher.
72t HT5M 15mm Pulley with Trampa Hypa hub Adapter, for 8 inches pneumatic wheels. Pulley printed in Alloy Nylon 910 - 50% infill and 6 layers Top/bottom/walls. Adapter printer in Advanced PLA 100% infill. It takes me a lot of time and a…
This is fairly simple recreation of caps that you can buy for your trampoline. Ideal for pipes with ~26mm of inner diameter fairly simply to print - with bit of care also without supports. PLA or PET should be ideal
Classic roblox trampoline
I recommend printing with organic supports with a minimum fill of 25%
This is a wonderful project which was really well studied and prepared by Adamow. As actually more and more people have largest print bed, I did remix the walls and floors to make them in one shoot (minimal print bed = 300mm). We go from…
The spacer places the safety-net pole (25 mm outer diameter) at a distance of 5 mm from the base frame tube (39 mm outer diameter), with a center bore for an M6 screw. The FreeCAD file is provided to allow for adaptations to different…
End cap for trampoline Category: Sport & Outdoors
Prevents the connector from filling up with crap. Print it with TPU Print instructions Category: Sport & Outdoors Summary Prevents the connector from filling up with crap. Print it with TPU
Abstandhalter für Netzstange Durchmesser 25mm und 38mm
I made this out of boredom hoping somebody might want to download it! I think if you would want to print this you may want to move the ball somewhere else and flip the trampoline upside down because it may just be easier to print that…
Normally I'd post a link to the stream where I designed this part, but unfortunately I didn't stream this one, so all you get is this link to my channel where I design things like this: https://www.youtube.com/c/ClarkSchaefer/videos .…
This is a simple Model i designed because the net-holder of a friends trampoline broke down and he couldn't find a replacement for it.
Replacments net caps for our outdoor trampoline. They also hold on to the protection net. I used a big zip tie to attach the net to each cap. See picture for model comparison. A diameter of 25.5mm suited perfect for me. Print instructions…
Upper rod cover originally made for trampoline, but can be used for any rod and also model parameters can be adjusted based on requested rod diameter. This one is for rod with 25 mm inner diameter. Print instructions Supports needed at…
For trampoline Gofit. Print instructions I used PETG, but if you want print this by ABS/ASA you must have box for 3D printer.
inspired from https://www.thingiverse.com/thing:4539088
Height is 67 mm and diameter is 62 mm. Replacement for poor quality original. Printed from PETG
A model of Lady form Lady and the Tramp.
Plastové díly na trampolíny - kryt trubky a drážkou na napínání sítě a distanční díl na nohy
This is a replacement end cap to go on the top of the vertical poles, supporting the top ring which holds the safety net. Many of my original brackets snapped off after a few years so I designed this replacement as EXIT will not sell you…
This model is for use with 25mm (~1 inch). It is intended to support Safety Net. If the Trampoline is outside you should print it in with PETG so its hard and it resist weather conditions. You can print it without supports. Print details:…
A model of Tramp from Lady and the Tramp
Trampoline – Gravitrax compatible Here I present my trampoline with TPU net. There are two versions available for download: The first version is based on a normal building block. It is twice as high and can be used anywhere. The…
Replacement net holder top caps for Plum trampolines. I've replaced the metal spring button with a designed-in clip, though it's not a great success and might snap depending on your material. However, I've found these fit in and hold a…
Modeled against my own trampoline Pole cap. Photo is only for reference
This piece goes on top of the post that hold the safety netting. Print vertically with supports or horizontally without. 100% infill for best results.
This is a trampoline spacer, used to hold the net support arms to the frame. I built this model to print after a wind storm damaged our trampoline. Ours was purchased from Sam's Club. Print Settings Printer Brand: LulzBot Printer: TAZ 5…
step for 78mm pipe, for easy access to trampoline, without ladder, perfect for those who have a robo-mower
Trampilla de techo 150x150 mm. Ideal usar iman de neodimio
This is a replacement locking clip / top cap for the pole holder on a BERG trampoline safety enclosure. The part clips over the enclosure pole and locks it into the base holder that is attached to the trampoline frame. The original…
if you download the model pot it to 40% size
Mushroom part used in the EXIT trampoline. It is little bit reinforced than original one. Spring hole works. Print Settings Rafts: No Supports: No Resolution: 0.35 Infill: 10% Notes: 2 perimeters, 3 solid layers
I needed a replacement for lost trampoline footpad. Made in TPU at 210 degrees, 30mm/s speed
This is a wall mount for little tikes trampolines with the large red feet. The feet snap securely into the cups and keeps the trampoline close to the wall. I used 2 mounts on the feet that have the handle bar attached to them.
trampoline net holder diameter 32mm easy printable easy customizable for other diameters Print instructions you can print it with a thick nozzle no support needed you can use PLA, but ASA might be better for the outside using
Trampoline Leg Barrier for Robot Lawnmowers Prevent your robotic lawnmower from getting stuck on trampoline legs with this practical 3D-printed connector system! This model allows you to attach wooden slats to the legs of a trampoline,…
This is a replacement part for a trampoline safety net. Diameter up to 26mm is suitable.
3D PRINTING SETTINGS PA12CF Infill: 30% Outlines: 5 schmeißt eure Sachen nicht weg versucht sie stattdessen solange wie möglich zu erhalten!
Designed with WSA measurements, these trucks will allow you to practice your streetboarding grabs, spins and flips on a trampoline, without worrying about damaging anything. The test pair I've printed so far have been in PLA (20% infill).…
Original broke, needed a replacement. Printed in PETG, as this will get a lot of sun and weather exposure. FreeCad model is a bit messy, but supplied if anyone needs to make changes to fit. Oct 9th: Added a last picture. Petg just fine…
This is a part for the Skywalker 8' Trampoline sold at places like Walmart. It replaces the plastic tops of the net poles (it protects you from landing on a sharp pole, and attaches the net to the poles). The nut slot is slightly larger…
This is a foot created to pressure fit over a 1 inch trampoline leg to keep it from marring the ground, but could be used for any pipe really. Printed preferably in TPU for its softness to not scratch the ground, although any material…
Alternative net holder for Ultrasport trampolines that you can use instead of the cap, that comes with the trampoline. It is designed for tubes with an outer diameter of about 25.5 mm. I use it with an 8 mm elastic cord that is fixed with…
Bei unserem Tupelo Trampolin, ist nach 3 Jahren oben am Netz ein Verbinder gebrochen. Da es leider kein Ersatz zu bestellen gibt habe ich dieses selbst nach konstruiert. Gedruckt habe ich es aus ASA
A risers for Trampa Trucks that are designed to hold MOON Nebula tail light with quick release Height 8mm Already modeled supports Quick release: https://imgur.com/a/xnEezfR
My little boy tried his hand at tinkercad. He designed these leg caps for our trampoline. I told him may be someone else can benefit from his design. So here it is. It'll totally make his day if someone else can benefit from it. Inner…
Designed to use less material possible and to print in 2.5 hours printing with 0.2mm layer height Print it in tpu Print instructions Category: Vehicles Summary Designed to use less material possible and to print in 2.5 hours printing with…
Português Brasileiro = Armadilha prática para mosquitos e pernilongos. Muito fácil de usar: basta preparar a mistura (veja abaixo), colocar no frasco, fechar e deixar agir. Em poucos dias, você começa a ver o resultado. Projetamos esse…
First design I created, made to fit Martian II with 6mm diameter stand offs (larger than stock) has a recess to fit Immersion RC Tramp VTX Antenna SMA Mount but will probably fit most similar VTX mounts. During my latest build I decided…
Made this trampoline as a voucher for a friend. Text can be easily added in the slicer. Can be printed in multicolor or a single color, or color change depending on the height. Should be printed with the feeds to the top, but its easier…
Leicht zu drucken und sehr stabil durch optimalen Faserverlauf.
I design it due to a little backlash between the top cover and the side screws. Print it in TPU Print instructions Category: Sport & Outdoors Summary I design it due to a little backlash between the top cover and the side screws. Print it…
https://youtu.be/46oyP1UV6fY These NeoPixels makes you wanna jump! Learn how to upgrade a cheap trampoline with interactive NeoPixel LEDs. Use Adafruits ItsyBitsy and a vibration sensor to make a trampoline light up when you jump on it.…
Mit dem Spannring kann ein aus Gymnastikband hergestellter Bezug auf dem Trichter fixiert werden. Prima zur Reparatur, wenn das Original gerissen ist, oder um aus Trichtern zusätzliche Trampoline herzustellen. Kurzes Video der XM…
Motor mount for Trampa Vertigo / Ultimate Trucks with belt tensioner and motor/belt covers.\ You need to use a CNC for the Motor Mount v2 Part, I used a 1/4inch aluminum (6061 grade) Print the Mount base and truck ring in PETG, Pro PLA or…
Rubber trampoline foot for a mini trampoline. The actual foot has two washers inside to prevent the feet from pushing through the rubber. They are about one inch diameter. You would print this using flexible filament. Category: Toy & Game…
una trampa simple pero eficaz
Just a few models of the plastic parts used to assemble a springfreetrampoline.com trampoline
to film on trampoline with go pro fits 1.5 in pole question's email [email protected]
Newer version here: https://www.thingiverse.com/thing:4260679 Print it in tpu Print instructions Category: Vehicles Summary Newer version here: https://www.thingiverse.com/thing:4260679 Print it in tpu
Clips to allow a Veriflite time of flight sensor to attach to a EuroTramp bed. They don't work well on Nissen beds but Continential beds with the metal anchor bars work fine too.
The elastic bands to keep the buffer/cover in place broke, so I made this as a replacement to keep the buffer in place using laundry drying rope. To tigthen the drying rope around the buffer I used the rope tensioner found here:…
A simple trampoline net holder. It is recommended to print out with PETG material.
save your floor with (TPU) feet for your kids trampoline
The slot to enter the rod is tight fit but prevent the rod jumping out. I printed it flat laying on side to have the forces across the layers.
Spare Distance Insert for Trampoline was created for broken replacing originals. We have a lot of broken inserts after few months jumping. It should be printed from some strong filament like PC or PP.
Una modificación para poder usar está caja con el juego de cartas de la polilla Tramposa.
My kids’ net on the trampoline keep coming off. The plastic cups that held the net up became brittle from the sun, so they fell apart. They were also a pain to put on and thread the screw through. With this solution, you can simply pop…
I created a Trampolin Mobil Mount for a Xiaomi Mi 8 Pro The Size of the Mount is: 164,40 mm x 82,417 mm x 12,90 mm (LxBxH) All parts are printed in PLA with 15% infill You need 2parts of the Mount - the Punchhole ist 30,8 mm Print…
Enclosure for EZRun Max 6 ESC / Trampa deck. Printed in Advanced PLA / 50% infill. It takes me a lot of time and a lot of beer to design these parts from scratch. If you can't buy me some time you can at least help with the beers on…
Replacement washers for the bolts on the legs of a springfree trampoline. I printed in TPU/Flex at .3 resolution and 0% infill. I don't know how many I actually needed so I just printed 30.
Net holder T joint for a trampoline made by Smyth Toys. It is recommended to print with ASA to be UV resistant.
This is a replacement cup/lid designed to perfectly fit the Tramp TRC-028 thermos . The model replicates the original geometry and thread, ensuring a snug, leak-free fit. Perfect if your original cup is lost, damaged, or if you simply…
Update 12.07.26: mit Filament PEBA 90A getesetet, deutlich bessere Sprungeigenschaften. (siehe 2. Video) Dieses Trampolin hat eine größere Fläche und einen sehr kleinen Rand Das Sprungtuch ist umlaufend 0,4mm kleiner um eine Grundspannung…
Id recommend printing solid infill, or at least the screw part make infill solid.
