1,088 models
How to use Validation Matrix (Tyler Schubert) https://youtu.be/GL-9Ia0SibQ The Validation Matrix must be printed with 4 or less base exposures for a correct test result. ------------------------------------------------------ The…
Filametrix Mod This is a mod of the Voron Stealthburner which adds a filament cutting possibility! Main Body Main Body with Filamentsensor Option has been added. - SB_CW2_Main_Body_Cutting_with_2xD2F_ECAS -…
Hehe cool light staff
This is a Calibration Matrix for the Prusa Mini to calibrate the first layer. It consists of 15x15mm squares that are 0.2mm tall. The Squares are layed out into a 4x4 Matrix and are printed sequentially starting form the front on the…
Did you like the story too? I loved it, so I used it to make cookie cutters and earrings :) I recommend them with love! You're welcome to sell physical items made from these STL files — whether it's cookies, keychains, earrings, or other…
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
This model pressure fits together with little tiny square pegs. If you want to avoid using glue, your extrusion multiplier needs to be tuned just right. Assembly is simple! But might make some instructions soon :)
I added a printable hinge joint and turned the snap cap into a threaded cap. Makes for a less cumbersome “install” and wear. Print the cap face up with tree supports for better quality. Print the watch on a side edge (as pictured) with…
Embrace the mysterious power of the Three-Eyed Demon Bird Keychain , inspired by the hit Netflix series K-pop Demon Hunters ! This unique 3D printable STL file captures the eerie beauty of a mythical demon bird with three glowing eyes,…
Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free, and this is not…
This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon: IMPORTANT NOTE Even this LED cube is much much easier to assemble than my previous “ Geodesic(k) RGB LED Spheres ” , it still…
If you're looking for an easy-to-print case and diffuser for your WS2812B 32x8 LED matrix panel, you're in luck. The case and diffuser have been designed to be printable on a common-sized print bed, and are split into separate parts for…
The .3mf file is already set up correctly to test your printer's flow. You must enable brim to hold the pieces together (10 lines should be enouth) and preferably set line width to 0.4mm . You should obtain at least one box with the…
I combined my passion for arduino projects and professional design skills to create an impressive dot matrix display/clock for my workspace. The project involved 3D printing, ARDUINO/ESP32 and addressable LED strip. I'll walk you through…
Kpop Demon hunter Huntrix(Huntr/x) light Stick - split to print remix I did some fusing and splitting to print the models easier (for my machine at least) and without supports. It will require some glue to connect the pieces. There's also…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Huntrix logo of Kpop Demon Hunters
Original Drawing made by me (Artist accounts: Tasty Voxels, AleL, CrealiTale Design) Do not re-upload this file online. Personal Use only! Like&Download if you want new free projects like this!
This is my version of the Autobot Matrix of Leadership, from the 1986 animated movie. I've found several good versions to print online, but they all print in a single color. This model is split into individual components so that each…
This is a modified version of this Pixel It case . It was created with the excellent Pixel It project in mind. The case has mounting points and an access port for the D1 mini, a cable path to make free-standing use easier, and optional…
You need Arduino Nano Example link 8x8 Matrix Example link 6x m3 Thread Inserts, outer diameter 4,2 mm. (if you want to use 5mm threads, there as a alternative Glas Part 6x m3x12 Lens Head Screws White Filament for the “Glas” Dark…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…
NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not possible to download this…
The ironing process (and its results) depend of three variables: flow rate ( FR ), spacing between ironing passes ( SBIP ) and printing speed ( PS ). The matrix shape allows to check two setting combinations at once; whilst we have three…
STL available. Paint it with your slicing software (no cms ams mm3u needed) Select the faces you want to change their color or height! (I use Blender, Edit Mode, to change the heights. I select the colors directly in slicing.) If you…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
For printers like the Saturn 4 Ultra that support resin calibration by printing multiple exposures in the same print, it is difficult after print to distinguish between the exposures. To avoid removing and cleaning them one by one, this…
I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
Bring your favorite Saja Boys characters to life with this fun 5-piece cookie cutter set! These STL files are optimized for clean, easy 3D printing and perfect for cookies, clay crafts, or fondant decorations. Ideal for fans, bakers, and…
16x16 LED Matric case Features: Fits standard 16x16 LED matrix Rear hidden power barrel jack Internal supports for panel Lots of space for dev board to drive the LED matrix Its designed to house a ESP32 or ESP8266 running something like…
The Exposure Calibration Test Stop wasting time marking your test prints with pens that wash away in IPA! This is a functional remix of the XP2 Validation Matrix by Photonsters Key Improvements in this Remix Embossed Numbering (1-8): Each…
This is a remix of Ibot_3D's excellent Voron Stealthburner printhead for the Bambu hotend. Changes include adding support for Filametrix, moving the wire path out of the way of the filament cutter, and tightening the slot for the hotend's…
A simple geometrical design inspired by the amazing Matrix movies! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
NO AMS REQUIRED. K-pop demon hunter light wands. Both Huntrix and Saja Boys. Perfect for cosplay or sing-alongs. Easy to print and assemble as well as easy access to replace batteries. I also chose lights that have 8 different patterns,…
MAZE RUNNER inspired LED 16x16 matrix clock with 256 NeoPixel LEDs Features: 16x16 matrix clock that you cannot read directly without knowing where you have to look. Some people i showed it had a really hard time to see it and some gave…
This project is a three part LED flag light case with different mounting options. V2 supports a 5V DC power supply (5VPS files) and up to a 5mm thick acrylic plate (V1 up to 3mm). Pictures were taken from the left side of the V1 dual…
Carry a little piece of your fandom with you everywhere! This Huntrix keychain is inspired by the K-Pop Demon Hunters universe and designed with fans in mind. Compact and durable, it’s perfect for clipping onto bags, keys, or lanyards.…
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
For everyone else with that soundtrack stuck in their head! Keychain and earring print profile versions. Materials: Bambu PLA Silk: Silver and Purple Supports: None Print details: Bambu Lab X1 Carbon 0.2 nozzle Textured plate 0.08mm High…
Harry Potter - Bellatrix Wand.
Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free, and this is not…
This model houses a WS2812 8x32 LED matrix, an ESP32 and the necessary cables. I'm using it as a status display for my PV inverter, the ESP runs Pixelix to display the contents. Most printers are too small to print the three parts in one…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
I gifted my son an Airsoft gun for Christmas. He wants to start playing with his friends in a league. One Stipulation I had is he needed to keep it up out of easy reach of smaller kids (plus he must keep it without batteries installed and…
Remix from https://www.thingiverse.com/thing:3808776 Parallelgleislehre für Minitrix. Faster print, less material used
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
Edit of the Stl to make it none hollow for resin printing.. found that the walls were too thin and didnt print right..
Case for multible ESP3266 dot matrix projekts. There are many projekts online, just search the web for ESP8266 and MAX7219 or dotmatrix. The drawer in the lid fits to the WeMos D1 Mini ESP8266 module. Close the lid with two M2.5 bolts…
UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…
32x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version *…
STL available. Paint it with your slicing software (no cms ams mm3u needed) Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale -…
The FilamATrix toolhead is great, but the Dragon HF mount just let too much air blow across the heat block of the TZ V6. I remixed the geometry of the Stealthburner mount from Citywrecker and combined it with the Dragon HF duct from…
Update 27Dec2022-All files have been updated; more Detail for both spring and elastic versions. Spring version clearances updated. Both require one 7/8" 4-40 screw or similar. Spring release requires one 3/8" 4-40 screw. Update…
This Huntrix K-Pop Demon wall art is a great gift for the ever growing legion of fans for the franchise.
This is a two-part housing for a cheap 64x32 LED matrix, including mounting for a Raspberry Pi 3A+ BOM 1x 192x96mm LED panel like this one . Unfortunately, this listing makes no guarantee of screw hole locations, however I've ordered…
CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…
I FORGOT TO SCALE PROPERLY SO BE SURE TO SCALE INSIDE YOUR SLICER
This model consists of 3 files which should fit smoothly together, you will have to provide your own strap. It is not sized to fit all so you will have to shrink it down or enlarge it depending on the size of your wrist.
Original Drawing made by me (Artist accounts: Tasty Voxels, AleL, CrealiTale Design) Do not re-upload this file online. Personal Use only! Like&Download if you want new free projects like this!
Mira's 3D model features the signature Funko Pop style – a large, proportionally oversized head and a simplified, compact body. Mira sports a bold, dynamic hairstyle, the highlights of which are precisely defined, matching her energy and…
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
Coronal brain matrices for 40-75g mouse brains 2024.04.19 - Added a version with increased slot sizes Print instructions PLA, 0.25 mm nozzle, 0.1 mm layer height --- If you'd like to support my work https://www.buymeacoffee.com/bitn
I found a great tutorial for electronics that was missing only the case. So I started modeling. Many thanks to Crazymakers for their work and sharing. Link to the video : Link to the website :…
Build a square LED display with the 8x8 NeoMatrix and Feather M4 Express! Learn Guide https://learn.adafruit.com/sqaure-neopixel-display-with-black-led-acrylic/ YouTube video Code on GitHub…
I purchased some Solmore RGB Cabinet Lights (Model NO.:S-CL-003) and remixed the insides of the original matrix ( https://www.thingiverse.com/thing:326614 ) to fit. Tolerances are tight so glue may not be needed. NOTE: You must have an IR…
NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not possible to download this…
I loved the original version of this model by Endorriar . But I had a problem, I'm currently playing a Firbolg Warlock in a Strixhaven campaign. So not only was I only ever going to have 4 pact slots maximum that didn't care what level…
This Huntrix concert light stick has a slot for a small flashlight to make it light up. Recommend printing it in transparent PETG and doing a layer change or MMU color swap for the colored portions. I've included a solid file and a…
Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free, and this is not…
This is stand for my Matrix of Leadership model. The base is hollowed out to reduce the amount of filament required to print. You can add supports if you want, but it really shouldn't need them. Any bridging issues wouldn't be visible at…
Relates other horn (newer work): – https://www.printables.com/model/430600-spherical-wave-horn-generator This is a generator for horns with tractrix crossection. Those are not the same as spherical wave horns. See here:…
A stylized demon hunter character with a confident stance and signature weapon pose. This model is great for display, desk decor, or anime-style collections. Print as a small figurine and finish with primer and paint for the best details.…
Spacer to minimize the play in the USB C port on the Victrix Pro FS-12. Not tested on any other models. You may need to adjust the scale by a couple percent either direction to get the fit you want.
64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…
Español: Por aquí les dejo el cover de la lampara que diseñamos en el evento en vivo en youtube en el canal de Mi Tutor Digital. Fue diseñada completamente en Fusion 360. Diseñado para una IKEA SEKOND. Mostrándola con una lampara edison…
Spacer to minimize the play in the USB C port on the Victrix Pro FS-12. Not tested on any other models. You may need to adjust the scale by a couple percent either direction to get the fit you want.
1:1 of the ASUS ROG STRIX B360-I GAMING mini-ITX Motherboard.
Changed to be compatible with TZ V6 2.0 HotEnd
1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…
This model can be used to build a LED matrix cube. It uses WLED as firmware and a WLED controller. The panels are glued with double sided tape to the "adapter". The cube has 5 sides with LEDs and a solid base. The image is from the…
Print it laying down. put the leds in the slots and wire it up. diffuse it from the front side
I'm making a project that uses these 8x8 RGB LED matricies and I needed a reference model. I couldn't find one so I knocked this one up in OpenScad. Seeing as I couldn't find one here, I figured I'd upload it so anyone can use it as a…
Hi, so I had some of these 8x8 LED Matrix panels laying around here and wanted to do something with it. I found the awesome matrix project from blueforcer which is open source. I wanted to use these 8x8 panels from CJMCU. Due to the…
After using a couple of home-made Awtrixes / PixelIts, I recently discovered the pre-built Ulanzi Smart Clocks, which are very cheap and are able to run both PixelIt and Awtrix light. So I added a few to my smart home, but in some places…
Very simple, wire these LEDS; https://www.aliexpress.com/item/4001296811800.html?spm=a2g0o.order_list.order_list_main.89.21ef1802Wp91AO Along with an ESP32 to a 5v PSU, glue the panels together and you're done :)
Bill of Materials (BOM) Build Guide Disclaimer: Open beta v0.1, technically not full release Strix is a brushless foam dart flywheel blaster expressly designed for use in competitive Nerf. Though spiritually related to the Gryphon , Strix…
Original Drawing made by me (Artist accounts: Tasty Voxels, AleL, CrealiTale Design) Do not re-upload this file online. Personal Use only! Download and like if you want new free projects like this!
A mount for the Orbiter 2.0 extruder for the FilamAtrix toolhead cutter (note the A in mAtrix) recommended for the BoxTurtle MMU from Armored Turtle. I remixed the Stealthburner Orbiter 2 mod and the model for the Orbiter Smart Sensor for…
What it does: Prints 9 tiles, each with a different bed and different nozzle temperature. I basically vary these two temperature settings: Note: PrusaSlicer v2.6.0-alpha6 or higher is required! Not tested on Orca or Bambu slicers I was…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
A mounting-System with variable lenght and angle. For use with Metrix G4 meters. For use with the “AI on the edge”-Project. I used the following ESP32-Cam:…
There's way too much information to decode the Matrix. You get used to it, though. Your brain does the translating. I don't even see the code. All I see is blonde, brunette, redhead. This is a simple gadget inspired by the popular movie…
Some simple dice for the game Pletrix, so we can put a set in our travel bag, but can be used to play regular old tetris or a new game you make up! Print with 100% infill to hopefully make the dice balanced. Grab some graph paper, roll…
Get ready for the premiere of The Matrix Resurrection.
This is a model of a small turn-table that is compatible with the Märklin / Trix C-Track system. It is meant to model the small turntables you would find connecting industries or in old stations, to shunt small two axle wagons between two…
![Galileo 2 (G2E) Filament runout sensor (UPDATED) [Filametrix and ERCF compatible]](https://media.printables.com/media/prints/643093/images/5077730_2e554cb6-2575-420e-bb02-eb9297ec54fb_2b773503-77b1-47cf-bd2d-d7ff2e546f65/pxl_20231110_184825771.jpg)
