Counting matching models…
I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
The super simplicity of a Tyrap / Tie-Wrap / Zip-Tie translated to use with a rope. Ever hung up a clothesline or something else hanging from a tree on vacation? Always that fiddling with tying the rope and untying it again at the end of…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. About this model Keep your glasses safe. Guard them with a T-Rex! The neck…
Print approx. €17.32–€21.16 excl. taxPreliminary estimate for one variant
I am huge fan of Formula 1 and cars, so I decided to add my model "Formula Tyrell P34 1976 Kid Toy (stronger with function wheels, 1:24)" to the ongoing Toy Cars Prusa Contest. I took and remodeled two original models by rkxone and…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
Flexi Tyrannosaure dimension de l'objet 164x84 mm Epaisseur 12 mm
Print approx. €3.68–€4.49 excl. taxPreliminary estimate for one variant
Introduction A tire lever is a small tool used to remove a (bicycle)tire from the rim. Mostly two or three levers are used to remove a tire more easily. It makes removing tight or stubborn tires much easier without damaging the rim.…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant
These are plastic inserts for your cardboard tokens, compatible with the 2021 version of Tyrants of the Underdark.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
3D model designed to emboss a T-rex paw into paper.
Encontré este magnifico diseño de llantas le agregue la cubierta,y un cuello a las ruedas delanteras para poder conectarlas con el eje de dirección delantera de un viejo (Y muy deteriorado y en vias de restauración) Renault Maxi Megan.…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Driven by François Cevert in the 1971 Grand Prix season. Cevert finished 3rd in the championship with four podium finishes and one win at the US grand Prix.
Wheel barrow had a axle of 16mm. New wheels have 20mm hole. Also new wheels are narrower (73mm) than old ones (95mm). So I whipped up a bushing which fits the new tires to the wheelbarrow. 80% infill to the middle section and 20% rest.…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
The Tyrolean Roulette, or Roulette Tirolese, is a traditional tabletop game that combines elements of luck and skill, often associated with fairs and alpine markets. It is similar to classic roulette but features a unique design and…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
STYR-01 is a compact and charming rolling robot that fits in the palm of your hand. It features a passive stabilization system using an internal counterweight. Thanks to this mechanism, its head always remains upright while rolling,…
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
An articulated dinosaur skeleton with a removable skull. A T-rex, Ceratosaurus and Allosaurus style skulls are included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…
The model is divided into 4 cards that fit most print plates. The pieces are 2.5mm thick. You can scale them up or down if you need. Once you print the cards you have to break the thin tabs that hold them together and then you can…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is a remix of the Samak figure from dutchmogul's The Curse of Moht . I like the more assassin-y look, since that's what I'm doing with my spies most of the time anyway. I scaled it down and changed the base to better match the…
Designed by a Professional What makes this headphone Hi-Fi? SCIENCE! I spent quite a while finding the optimum combination of tuning materials and geometry to bring you the Satyr 3. This design beats out all of its competition in the…
First, the name. G is for Gaub, or Greg, whichever you prefer. S is for Samson, as in Dennis Samson. His original design for a rotating sanding drum machine for whole axles (e.g. pressed on wheels) inspired this design to a great extent.…
My takes on the Characters, NPCs and Creatures of Tyranny of Dragons are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
Print this little friend for your kids or just as decoration ;-) You will need supports… Would be happy to see your makes!
Satyr 4 DONT WORRY! I've already done the hard part for you! I spent thousands of hours learning the science behind headphones to create this headphone design! As the 4th iteration of the Satyr Open Back Series I have spent the past few…
Tyre Lever - Tyre Monkey - Leva smonta gomme Update: added Rev2 03/24/2025 - TLM_REV2 + TLM_REV2 Lacet added Rev1 Resize to adjust dimension Material Recommendation: For non-heavy-duty use, PLA+ performs excellently. For more demanding…
Der Dübel ist ideal um Wandbefestigungen in aussen- oder innwändigen Polystyrol Isolierungen anzubringen. Der Dübel kann mit einem Schraubendreher Torx40 gesetzt werden. Ideal wird dann eine 4mm Holzschraube verwendet. In der STL-Datei…
Valve Tyre with Volkswagen logo
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
This dowel is to fix things in very soft materials (styrofoam) with or without a cover layer. It is similar to the Fischer FID 50 K dowel. Print Settings Printer Brand: MK3 Printer: Prusa i3 Supports: Yes Resolution: 0.3mm Infill: 100%…
I have always had a problem how to measure the profile depth of a car tire. With this simple tool you can immediately determine if the profile depth falls below the permitted minimum (1.6 mm) and how deep the profile is (This can be read…
This pencil holder is made to look like a stack of tyres. The dimensions are made so the holder/cup can be used as a holder/insulator for your beverage can. The inside dimensions are diameter: 66,6 mm height: 98 mm Enjoy :)
Designed these to use with my Traxxas E-Revo VXL 1/16. Its a dual extrusion print. I used PLA (green) and Flex (black). These tires drift more than the other tires we can buy for the RC cars. I tried several tires with different flexible…
I wanted this in a single print, so I merged their files into 1 model. Print Settings Supports: Yes Resolution: .15 Infill: 10 Category: Sculptures
I have added a modified file under the name Dowel into polystyrene V2, which is stripped of the window at the top of the body.
Scientifically accurate model of a Tyrannosaurus Rex. I based the posed version and the anatomy off of the Sue skeleton from the Field Museum. The model features scale/skin texturing along the model. The figurine measures 8.5 inches at…
This is a custom rim designed to fit the popoular LEGO 43.2x22 tyre size. I was kinda unhappy with the stock rims because they don't really look realistic, which is why I decided to print my own. I got the outer part of the rim from…
When you want to replace your tyre on, for instance, your motor Cycle you want to protect your rim. Rim Shiels or Protectors are the things to use! Print with heavy fill in! (like 80%) Print on the side! (The stl should be in the right…
Need to deflate your tires (tyres) for off road and are too cheap for a proper tool? Someone parked in front of your house blocking you in? Well I have the thing for you. Simple, easy . fast and super cheap. Fusion files included. Print a…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Dinosaur 3D puzzle of a T-Rex in 24 items. Printed flat on bed and glued together. Design is based on thingiverse.com/thing:21315, however the STL was in assembled form and I wanted them in separate pieces. So I cut them out in blender.…
Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…
Alatyr symbol / Star of Rod / Roda diameter approx. 50mm Roda suitable for Roda insert 1 and 2, or Filament change at 11th layer Roda (1) suitable for Roda insert 1 and 2, or Filament change at 11th layer Roda (2) - transparent model Roda…
The Satyr 2 presents a sound profile that is a delicate balance of clarity and warmth. It leans toward a mid-forward and neutral signature, allowing vocals and instruments to truly shine and take center stage. There's a subtle but…
12. Feb. 2024 V2.0: Visual improvements New scarf New hood New armor scarf mounts with jewelry 21. Jan 2024 V1.1 : Multi-part sword added Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is…
The settings I used: CounterWeight_1n2: 0.2mm layer, 2 walls, 100% infill Head_Face_Arm: 0.2mm layer, 1 wall, 0% infill, 3 top shell layers, 2 bottom shell layers (Speed 30% slower than what I normally use for the filament) Wheel: 0.2mm…
Wheel hub center caps for Skoda wheels Model is designed for 58mm diameter slot in the wheel. Print so that the logo is standing up, use supports. I printed them out of PETG so they would last longer in the heat, could eventually use some…
This model is compatible with the lego system.
Adapters and holders for IKEA STYRBAR and TRÅDFRI. The ELKO parts are holders that fit into and over existing ELKO holders without removing them. Only remove the buttons from the ELKO holders first. The STYRBAR button is fitted…
This model is compatible with the lego system.
This model is set of Tyrannosaurus 3D puzzle and Platform, and upgraded version of the previously released "Classic Style T-Rex". https://www.printables.com/model/468501-3dino-puzzle-classic-style-t-rex This model is made with the same…
Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…
RC Foam Tyre Inserts - for Proline Hyrax 120mm. Rims with two rows of weights. Printed from Filament PM - TPE 88 RubberJet Flex Its for heavy cars. My car is about 7kg. I expect an improvement in the side tilt compared to the original…
Since the new version of Tyrants doesn't include the 4 cardboard inner circles. I decided to print my own. These are designed to be printed 2-tone if you want. If you already have the cardboard ones, maybe you can use them as coasters for…
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
This model is compatible with the lego system.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
In this Thing I have separated the rim and tyres for my Willys Jeep, so they can be printed in different colors and materials. Original Thing: https://www.thingiverse.com/thing:4834434 Category: Vehicles
Wanted to try TPU and aim to make a remote controlled buggy, so figure, why not print some wheels :). There's a hole to fit a screw and screwdriver through to bind the wheel to the axle. I printed in 95A TPU with 15% gyroid infill. It's…
This model is my first attempt on Trampa hub. Mainly for street carving. If it proves functionnal (or if asked in the comments) I'll make an AT version with more crampons Leave comments if upgrades are required
This model is compatible with the lego system.
An updated counterweight model with an M10 nut pocket to add more weight and to improve stability. It works even with default 15% infill (use more for better stability) and allows to attach a heavier head. The pocket and the cap are VERY…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Changes to espr14's design: flat inner top, to allow better sealing if fully screwed on valve flat top to simplify printing in upside-down position printing advice: enable small perimeters for thread print in 0.2 or below print using PETG…
If you were looking for headphones to print but you're worried that the end product wont sound good then these are the headphones for you. Just follow the instructions to the letter and you'll be rewarded with a well tuned set of…
You need to print player_tray and player_cards 4 times and minions six times. This insert is for second edition (square box). If you looking for first edition check out this design . Do you like my design? You can buy me a coffee :)…
The OpenRC MK3 Tractor is a great model. Just about the only thing I didn't like on it though are the rear tyres. To me, they didn't quite have the look of “real” tyres. I've printed them out of PLA. These are printed in two pieces that…
Schrader tyre valve to airbed mattress valve adaptor, Printed in PLA. No supports. Print wide end down. Requires you to punch out hole with small screwdriver Used variable heights in Prusaslicer, main body printed @ 0.2 and screw thread…
A very gorgeous and fun & engaging puzzle kit of a Tyrannosaur 😎 This would be very fun to do, as it's a puzzle I won't add a manual of building it but you can have some retro fun building it, also you can use the built one for reference.…
Valve tyre with BMW logo for all type of car or motorcycle
If you are a maker with wheels then you want appropriate valve caps!
This model is compatible with the lego system.
Print from https://www.thingiverse.com/thing:2842959 (THX) with PLA Prusa and supports only on overhang Print instructions Copy Gcode on your SD card or Octoprint, and print. 😉
Material: PETG it's enough infill: 100% highly recommended Drill_EPS_XPS_1: print teeth up with supports under the cross If assembly is so tight just slightly grind edges on Drill_EPS_XPS_2
Good morning, Welcome to my profile, full of models and miniatures :-) I have a Tyrannosaurus Dinosaur for you. My children love my models and I like to paint them. It prints really well. Support is needed! If you are interested in my…
I've designed this for a scale project of Icarus 280 bus. You can scale it according to your desire. I've pictured the DLP version, but it also prints fine on MK3
These are Drifting the WPL D12 very well, bone stock! Even better when upgraded Remix of a 1:10 scale RC Drift Rim (Source file/Author unknown; will 100% credit when I find it, Thingiverse) Remix of Gadoga "Tamiya M Chassis Drift Tire…
This model is compatible with the lego system.
ZZD Changeable Hook With a drywall anchor and screw, mount this coat hook to your wall for a functional decoration! Use this T-Rex hook alongside other dinosaur and nature decorations to build a scene that perfectly fits your space. If…
All the organizers for the second edition of Tyrants are designed around the cardboard tokens. I wanted something that would work with 3D printed upgrades. These trays have been designed to be used with the following components: Troop…
I couldn't find a complete set of summons for the Beast Tyrant so I created it from various models I found around the interwebs, with some smaller or larger modifications. I also fixed a few errors in those models by running them through…
It all started with the idea to push the limits of the 3D printing to create a precision tool that I could have made out of metal instead. The first version was without real bearings so after a while the main bearing started to get…
I wanted to find dinosaur heads to make handles for my son's dresser drawers. The model I remixed was a perfect candidate. There is a 1/8" (3.18 mm) diameter hole, 30 mm deep to work with a lot of spare hardware I had around the house.…
I designed this to wall-mount my Ikea STYRBAR remote for the TRADFRI living room lights and make it sort of match the other light switches and outlets. To mount on the wall, mark out and install two or four diagonal screws at 94mm spacing…
R1 > Radial grooves added R2>Traditional tread tyres adapted from https://www.thingiverse.com/thing:4892947
Suggested Name: Faun (a generic name), or something more playful like "Pip" or "Ramiro," or more rustic like "Silas" or "Brier." Race: Satyr (obviously!) Suggested Class: Satyrs can be very versatile, but here are some ideas that fit well…
![[3Dino Puzzle] Tyrannosaurus Ver.2.0](https://media.printables.com/media/prints/483157/images/3947268_6e6ece3e-e939-4b6c-b87d-35a66579a744/large_display_69fde4e8-3664-49c3-a16c-69d50d07c16e_483157.jpg)
