481 models
A replacement fuse puller for storage in the engine bay with the spare fuses. Print instructions Unassociated tags: fuse puller Category: Hand Tools Print Settings Resolution: .1 Infill: 100% Notes: Small object, so shouldn't take long to…
As I was printing a few things to get ready to upgrade my MK4S to a CORE One, I printed off LarryD's Stepper Motor Pulley Puller without looking at what size bolt he had made it for. I didn't have any M4 hardware on hand so made this…
printed with PLA 20% infill and worked perfect without scratches
To attach it to the gear wheel, you will need: 4 pieces M3x16mm bolts & 4 pieces M3 nuts Print speed: 60 mm/s Infill patern: Cubic Infill: 30% For PLA - Nozzle Temp: 195 °C - Bed Temp: 60°C For PET recyclated filament
Stripped nut replacement for Honda ATV Choke cable Nut (Under choke puller on handlebar). Insertable nut, to avoid having to remove the whole choke cable. You can also insert the small threaded part an glue it to make the nut complete. V1…
Pulley Puller for Dynamic Range X1 Parts: 3D printed beam (1) M3 x 3mm Thread Insert (CNC Kitchen) (1) 15 x 3mm socket head screw
This keycap puller is a simple and effective tool for removing keycaps from your mechanical keyboard. It comes in two versions, a short and a long one, to accommodate different keycap sizes and styles. The design is user-friendly, making…
A very simple key cap puller for computer keyboards. I guess I could have just printed someone else's design but I just made my own in fusion 360. V3 is thinner to get into tighter keyboards
Tolerances will be tight but it works fine for me, if you encounter any compatibility problems leave feedback and I will adjust the model. I also provide two different versions so you can pick the handle type that you prefer. Version 2…
Super Mario Buller Wall Decor
Centauri Carbonのノズルの左側コネクター取り外しジグです。 This is a jig designed to remove the left-side nozzle connector of the Centauri Carbon.
Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.
This is a easy printable tool to safely remove guitar knobs by allowing you to equally apply upward pressure to remove it. Also, using plastic will not scratch or harm your guitar compared to prying it off with a screwdriver or pliers.…
The source marked this model as adult content.
28 mm paper clip is used as a base 🖇. Simple design made in fusion 360. Instead of a paper clip, you can use a piece of wire. When assembling, use glue 💧 It is better to place the paperclip so that its ends face the inside of the hexagon…
When planing extruder upgrade on my Creality Ender 5 Pro I discovered that drive gear is push fitted on the shaft and there is no easy way to remove it (WD40 + pliers didn't work). So I've designed a small tool (a puller) to remove the…
TPU Panty Puller (BETA) by Qwerm Is your THICK magazine to much for that TIGHT little mag pouch to handle? A magpul-like magazine puller based on Weapons Grade Waifu's panty magpuls that they no longer sell. I'm considering this release…
Sometimes I like to try out an idea in 3D printing even though I think it may not be the best choice for a particular application, because it helps me to test the limits of what is possible. With that in mind, I can say that these key-cap…
Thing name says it all :) Print Settings Rafts: No Supports: Yes Category: Tools
V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…
I needed a keycap puller that won't scratch my keycaps so I 3D modelled one that resembles the popular one with metal wires. You need to print two pullers and insert them into the holder. They have holes so you can stick a piece of…
I've designed a pacifier for the Baby Born doll of my daughter. You'll have to print all 3 parts and stick them in each other. The pieces should hold together pressing them in each other with some force. If they turn out too loose…
for the ease of removing hairs stuck in wheels, brushes or any rotating object that can tangle them
Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…
This keycap puller is a V2.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of keycaps without risking damage to the keycaps. This is an upgrade of my…
This is a single piece case to hold 40 mini or low profile mini car fuses and a printable fuse puller. I printed in PETG on a MK3S+ using PrusaSlicer's 0.2mm settings.
Centauri Carbonのノズルの左右一体のコネクター取り外しジグです。 個人的には左右は独立したジグの方が左右一体型よりも使いやすいと感じました。 Elegoo Centauri Carbon Right and Left combined Nozzle connector puller. In my experience, having independent jigs for the left and right connectors offers…
A set of rulers for centering out your graphic designs on t-shirts. You can print one color the first 0.6 and change color after that to make the lettering and numbers more visible. Additionally, you could use your Cricut or similar…
for full size automotive fuse
Thank you for looking. Please like, share and download.
When I went to change strings on an old guitar I had trouble getting the bridge pins out. I scuffed them up with my needlenose pliers and also pinched my fingers. This is a small lever that fits around the bridge pin so that it's easy to…
A simple tool to help pulling the keys/keycaps of a keyboard.
Uses the original model and adds in a USB sized handle to make for easier storage and purchase when in use.
Keycap Puller: Print-in-Place --------------------------------------------------------------------------------- About: Print-in-place keycap puller that safely removes keycaps from a mechanical keyboard Inspired by Nikoraasu's keycap…
When you have to take your x-axis apart to replace the bearings and/or rods, this printable rod puller makes it a little easier with some spare hardware from your spare parts bags. All you need in addition to printing the parts with PETG,…
Easy to use compact tool for whenever you restring your guitar. Easily slip the far end of the tool under any string while resting the proximal end on top of the string. Add leverage to stretch the string as you slowly move up the fret…
For pulling CAT5/6/7 cable snag-free through other mess of cables / drop-ceiling / raised floor Works when pulling just one cable out of a mess of cables, or when pulling a new cable through to replace a broken cable. Note: Always use…
The fuse puller that came with my car (Astra J) broke the first time I used it so I re-created it in fusion. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament:…
The key cap puller that came with Corsair K70 Keyboard broke. So I modeled an exact copy. Make sure to sand lightly around the arms so the keys don't get scratched when you pull them. Category: Computer
Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…
Designed a replacement keypuller for my Corsair wrist rest that I have on my K95 keyboard. Fits perfectly in the existing location so its perfect if you've lost or broken yours. It also works great as a general use key puller, PLA and…
Centauri Carbonのノズルのコネクター取り外しジグです。 配線を引っ張ると壊れる事例があるようなので作りました。 This is a jig designed to remove the nozzle connector of the Centauri Carbon. I created it because there have been cases where pulling on the wiring caused damage.
Cheap keybak alternative: https://www.amazon.de/ZDNT-Automatischer-T%C3%BCrschlie%C3%9Fer-Automatisch-T%C3%BCrschliesser/dp/B0BQRGTR8B Even cheaper when buying from aliexpress: https://www.aliexpress.com/item/4001346125084.html 800gr or…
A practical, small, easy to use battery puller. Snaps on with a firm satisfying "CLICK" and easily slides off. Easy to hang on to, but small enough to clip on to your drone bag or keep in your pocket without losing it. Based off this…
With this adapter you can build towers with Duplo and switch over to the Kulerbü stud format. That way you can go as high as the number of Duplo bricks you have. Both the fit to the Duplo bricks as the fit to the Kullerbü units is snug.…
Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…
It is still experimental! For now, please only print it if you own a 3D printer. I'd be happy about feedback. This is a switch puller for Kailh Choc V1 (PG1350) Switches. It will only work with switches in a plate. Layer height doesn't…
I lost mine so I modelled one up. It's designed to slightly bend and then hook itself under the keycap. You only need to hook one end and the friction alone on the other side will give it a secure enough of a grip to remove the keycap. I…
I made this to more easily lift the lever on SFPs inserted into densely packed ports. Happy making! For what it's worth I printed mine in ASA and those little fingers are plenty strong.
I designed this tool as a handy way of pulling tent stakes from the ground. Use the long claw to get the stake started and use the smaller hook on the back to finish pulling the stake. Printing: The handle components should be printed…
A simple hook for grabbing rope and pulling underneath bands or cuffs for shibari or other rope bondage. This was designed as an accessibility aid for those with reduced finger mobility and strength, but helpful for anyone dealing with…
It may be smart to print in PETG or Nylon, it works in PLA but is more susceptible to failure.
This particular keycap puller was designed and tested with Logitech G512 keyboard, but might very well work with other models and brands. For the best results use the 0.25 nozzle.
Spring has sprung, and a lot of weeds have sprung up with it. Without the use of weed killer, removing weeds from a garden before planting can be a time consuming task. This tool helps with hard to remove weeds by loosening their roots!…
Fuse puller for AGC type cylindrical glass fuses. Remix of thing:4833779 Category: Tools
I liked the Original design but i found out that it was short for my liking, so i extended it little bit and made the bottom flat so i don't use support or deal with overhangs. All right goes to Chienline for the Original design Category:…
When disassembling the MK4s to convert to the CoreOne one of the pulleys was stuck on the motor shaft. Instead of yanking on the shaft I designed and printed this simple puller to print on the Mini+. Printed in PETG with 40% fill, flat…
Simple yet effective fuse puller for your car.
Have you ever experienced plastic print-file style film storage pages and how tricky it can be to insert/drag out a negative when there's a humidity in the air? Use this negative puller to pull them out or drag them in. Category: Camera
There are two models: the loose one - in the pictures - is for normal thickness PET bottle strip, the other is for thin PET strips (on normal thickness, it creates quite some friction ). Printed in PETG, for smoothness, 0.28mm layer, 3…
For getting multi colour print on one colour printed use post procesing script pause at height and change the filament to other colour ( USE PLA TO PLA not PLA TO PETG IT WONT STICK TOGETHER.) - choose this file : Ruller TEXT OUT for…
Suggested to me by Dave Rome of CyclingTips ( @romeandstuff on Instagram) when he noticed a similar tool in the CeramicSpeed hub bearing tool kit . The tool slips over press-fit end caps found on many hubs, especially those with 12 and…
Simple endpiece for a Kullerbü track. Will catch 5 to 6 balls from running around in your home. I printed this from PLA.
Yet another keycap puller, this time in OpenSCAD. Use this to remove 18mm Cherry style keycaps without damaging the stem or stabilizers. You don't want to break your fancy keyboard while removing Hot Pocket and Cheetos crumbs, do you?…
Schnell und einfach die Tasten deiner mechanischen Tastatur entfernen.
Pretty straightforward here, I used PLA no supports 80% infill, you will need a m5 X 50 screw and nut.
I've made two version of this arrow puller, that needs to be printed with a flexible filament. The original (photo) and a mk2. The mk2 is wider in the center and has secondary grooves for fat arrows. Print Settings Printer Brand: Prusa…
I have been using a pulltruder ( PETamentor2 by Ondřej Šraitr ) for almost a year now, and my biggest pain point was that after every PET bottle that I converted into 3D printer filament, I had to unwind it from the puller spool, and…
A few people have been talking about keycap pullers with a stack component in the Mechanical Keyboard space. I quick designed one in tinkercad as none of them were free. So heres one thats free. The purpose of this is to be able to…
Switchpuller for CherryMX switches. Prints fast and is sufficiently rigid while slim enough to not collide with neighboring switches. Adjacent keycaps have to come off for it to fit. Print with a 0.4mm nozzle and manually place the seam…
German: Verloren, kaputt oder einfach nicht genügend dabei; an den Säulenverbindern für die Kullerbü mangelt es bei uns fast immer. Darum habe ich mir dieses einfach und ohne Support zu druckende Ersatzteil gebastelt. Über…
Print with some strong settings. I printed this with 3 perimeters, 50% infill, PETG, 0.6 nozzle. I printed it on its side (as seen in the picture and also add some supports to help keep it on the bed). When I used it, the plastic bent a…
Puller for slot car motor pinion gears. You will need a 1/4-20 bolt and nut to complete the thing. Step file included so that you can modify as necessary. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Remix of the hamano's paperclip . We only had the kind of paper clips in the pictures and many of the already done paper clip pullers did not fit to them, so I made my own from scratch. All the credits should go to the original creator…
This is my version of PET bottle recycler gear reduction machine designed to pull and wind string made from recycled PET bottles. you can see assembling process here: parts you need: Screw M3x20 Screw M3x10 Bearing 608 4x 8mm shaft 2x
To assemble the puller, you need an rubber band. Just put the two halves together and screw on the nut. Put the rubber band in the grooves in two or three layers. In V2 roundings on supporting surfaces have been removed. The stability of…
How to show the structure of some carbon structures to pupils? One option is to use 3D printed model :-). This set includes: nanotube(6,6), nanotube(8,3), nanotube(10,0), fullerene C60, graphene. The models carbon diameter is 10 mm (the…
The new cooling duct on the MK4S makes it very difficult to remove the silicone sock, since access to the top of the heat block is obstructed. This simple tool is designed to hook the silicone sock, so it can be pulled downward and…
A neighbor's son had gotten his mouthpiece stuck in his trumpet late on a Sunday evening and we were unable to remove it. Searching online I noted a variety of simple ‘puller’ options available for purchase and wondered if I could model…
Recomended for SLA print.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This tool was designed to make changing MicroSD cards in a GoPro a lot easier. The MicroSD card slot in the current generation GoPro has a tendency to launch cards across the room/field/car. If you avoid ejection it can be a bit tricky to…
As I was trying to pull some weeds from my lawn without pulling up the grass, this idea came to me. This tool lets you pull leaves and stems of broadleaf weeds while leaving the grass alone. This does not pull the roots out (maybe it will…
This track piece is ment to combine two tracks into one. Speed of the balls cannot be to high or they will not stay in the track.
My wife lost one zipper puller on her backpack, cord just pulled of it, so I printed replacement. Initially I created two part piece with idea to put cord and assemble afterwards. But after some tests I realized that solid piece will be…
BOM: Printed with ROSA3D Starter PLA Black A must-have utility tool for any mechanical keyboard enthusiast! Clean your board or swap out your keycaps instantly with this lightweight, support-free design. This keycap puller is specifically…
Easy to print cable puller with magnet slots inside. You can use the pre-configured gcode that has pause in right time, or you can add your own pause. I used 3 of 12x1mm magnets inside the slot to have extra strong attraction. You can use…
I saw something like this some years ago, and as my Mother is now becoming frail I decided to update the idea, to a solid object. The 3 pin fit is snug, to stop the plug falling out when removed from socket, and stops fingers or objects…
Drucktipps Sie können die Kappe mit dem kleinen Loch auf das Druckbett setzen. Keine Supports erforderlich. Empfehle einen äußeren Rand. TIPP: Wenn Sie das Loch schließen möchten, damit Pulver nicht versehentlich ausläuft, können Sie…
Simple tool to pull miniature light bulbs from strings of lights.
Edit The standard piece has a 0.2 clearance in the carabinier, in my case it opens just fine after a little initial resitance, but I added 0.3 and 0.4 clearance versions in case the standard ones bind too much on different…
Flywheel puller for if you over press your flywheel. This will not completely remove the flywheel. It will pull it flush with the motor stud. Works with a Gryphon with Kraken 130 motor and Kepler flywheel. Needed: 4mm nut and bolt Print…
Lost the fuse puller for my 2016 Kia Soul. When I found it again, I decided to make sure I had an extra. Not an exact match, but it does fit in the storage location in the under hood fuse box and will pull fuses as expected. My print was…
This is a keycap puller I designed to be material efficient and quick to reprint since cats seem to keep depriving me of my injection molded ones. (great for using up small strands too) I was worried about scratching, so I tried to make…
I got tired of destroying my fingers trying to pull/wiggle stubborn JST-XH plugs out of their sockets, or destroying the plug by trying to grip it with pliers. This simple tool securely grips 2, 3, or 4-pin JST-XH plugs (2.5mm pitch)…
![V1.0 Universal Keycap Puller [Apex 9/Pro Replica] *V2.0 AVAILABLE*](https://media.printables.com/media/prints/1063837/images/8051042_4dbcd059-28ff-4873-a9ae-ae9c975cb571_2dfe49e3-f5d3-408a-8202-62989a22972f/20241105_191539.jpg)
![V2.0 Universal Keycap Puller [Apex 9/Pro Replica]](https://media.printables.com/media/prints/1f9a9d88-2dac-4e47-823a-53d92cf34cbc/images/9808445_750f55ef-e2b5-4fdf-a0f6-3074765a5d06_1e58dbe8-4296-4f9f-9802-0a9876495451/1.webp)
![[Experimental] Kailh Choc V1 Switch Puller](https://media.printables.com/media/prints/222949/images/2038495_66998148-ec2b-405b-a55c-6b11be07f2b3/dsc07159.jpg)
