Counting matching models…
Dieser liebevoll gestaltete Bilderrahmen „Mein erster Schultag“ ist perfekt, um das Einschulungsfoto deines Kindes stilvoll in Szene zu setzen. Der Rahmen enthält eine dekorative Schultüte und große, gut lesbare Buchstaben. Ideal als…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for one variant
A warrior-prince from the middle east. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE A bald…
Printed the iconic Sultan Ahmed Mosque using PLA and FDM technology! A masterpiece of architecture recreated in stunning
I have created a model that fits perfectly for the Hultafors Magic Square. The M3 insert is used for mounting in the Honeycomb Storage Wall. I used a 10 mm M3 screw in addition to an M3 nut.
!!! Allready I printing test model. I'll test it next week, so be careful now !!! Designed for resin printers. Printer: Anycubic M5s
A little pin to prevent the hooks from falling of when grabbing something from them.
Printing Material: TPU Perimeters/Walls: 5 Installation Push the part into the frame before inserting the slat Dimensions The Part is designed to fit 70 x 12 mm slats
Support test of your 3d printer. By activating Tree Support > Hybrid you will be able to test both the normal support on the horizontal overhang and the tree support on the inclined overhang.
I've designed this simple holder for the Hultafors Talmeter measuring tape that fits in the Gridfinity system. It's made for the 3 m version that I got, but probably fits others as well. I've made one version with text and one without.…
The black hooks that are available for the Hultarp kitchen rail can easily fall off the rail when jostled. These retaining pins lock into the hole on the hook. Print using clone tool to get the number you need. Recommend PETG with 4 walls…
ENGLISH: Case designed to protect and hide an airtag device from view and to be able to have your scooter located without anyone noticing. Avoid thefts and losses in the simplest way Instructions: Layer height: maximum 0.28, recommended…
Catapulta funcional para impressão 3D! Imprimir e colocar elástico nos furos de tração!
I reproduced the IKEA HULTARP hook for my kitchen. https://www.ikea.com/us/en/p/hultarp-hook-black-10444445/ Printed in PLA 0.2mm layers Supports with model printed on the side as seen in the picture Brim (I made a raft for some reason)…
These tiny clips keep the Hultarp hook in place. They allow for a free swivel, but will stop the hook from being lifted. You need 2 parts per hook with total print time @ 5 minutes and 0,4g of filament. insert clip Please PRINT MULTIPLE…
Mount IKEA's magnetic Hultarp knife rack to the Skadis pegboard. No extra hardware needed, just a flat head screwdriver to twist in the pins. Print one of each pin. The orientation of each corresponds to the holes in the Hultarp's…
Mounting clips for your hultafors knife on your molle panel
Hürrem Sultan, also known as Roxelana , was a captivating figure who rose from humble beginnings to become one of the most powerful and influential womentoman history. Her story is one of ambition, intelligence, and a relentless pursuit…
I have created a model that fits for the Hultafors Talmeter. The M3 insert is used for mounting in the Honeycomb Storage Wall. I used a 10 mm M3 screw in addition to an M3 nut.
This is simple hook for mounting 38 cm Hultarp magnetic knife rack on Skadis pegboard . No supports needed Tested PLA and PETG layer height 0,2 8 perimeters 15-04-2022 V2 Minor corrections. 29-08-2025 V3 Added chamfer on outer edges.
16.5mm inner diameter, 42mm support leg length from center of rod/hook. Negative volume blocks can be moved in prusaslicer to adjust holder pins/support size somewhat.
EL MODELO ESTA DISEÑADO PARA IMPRIMIRSE EN MULTI COLOR, SE CUENTA CON DOS VERSIONES DEL ARCHIVO UNO DODNE VIENE COMPLETO Y SE PROGRAMA EL CAMBIO DE COLOR Y TAMBIEN SE ENCUENTRA DIVIDIDO DONDE SE CUENTA CON EL ARCHIVO DE BASE Y LA PARTE…
wide enough to hold the Hultafors speedsquare that is 29mm wide.
Flash Gordon - Lord Vultan Birdman - 1936 3D printable model.
Mounting bracket for Luxarflex roller blinds. Support pour rideau roulant occultant Luxarflex. Print Settings Rafts: No Resolution: 0.2 Infill: 80% Filament brand: - Filament color: White Filament material: PETG Notes: No supports
The Sultan makes his arguments known through the roar of artillery, and here on the Wall, debate is a much appreciated artform. My take on the Sultanate Grand Cannon, loosely based off of the French Mle 189 75mm cannon, mixed with the…
Fatih Sultan Mehmed Silüeti. Yazıcıdan baskı alıp, kağıt üzerinde damga baskı için kullanılabilir.
Grug Pebblepolish - Chief Rock Softness Consultant
I didn't like any of the current phone mounts for the Ford 22-24 Maverick so I made a horizontal shaded mount for a Samsung Galaxy S24 Ultra. It will fit a 170mm x 85mm x 12mm phone. The mount just clips right onto the top of the…
A pin that can be pushed into IKEA Hultarp hooks to stop them from falling off the rail. This remix has slightly modified dimensions to improve the fit when printed with my Prusa Mini+. Print Settings printer: Prusa Mini+ filament: Prusa…
Why I made this I wanted a compact and smart way to store my multicutter accessories in my L-BOXX. When I saw a magnetic knife holder(HULTARP) at IKEA, I thought it would be a great idea to install it in my L-BOXX. How to print it I…
Wall mount for Hultafors SM "DIY-er" spirit level.
This 3D-printed holder is specifically designed to fit Hultafors tape measures and easily mounts onto an IKEA Skådis pegboard. It's perfect for keeping your tape measure organized and within reach in your workshop or hobby space. The…
Wanted to add my Hultafors woodworking pencil to my HSW Wall System, but couldn't see anything on Printables yet… so I made my own. It is designed to be used in conjunction with a single M4 HSW insert (along with an M4 screw & nut). If…
Sultan Ahmed Cami İstanbul Türkiye Lithophane
Anhåll till Hultefors Meterstock G59 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category: Hand Tools
Love my hanging Ikea Hultarp buckets, but I needed some added organization. For more variations see https://cults3d.com/:1495503
I created this template for my workshop and it's really useful, so I decided to share it. I'm sure it will make your work easier. If you'd like me to upload a specific design, don't hesitate to ask.
Sultan of Magic Scrolls Category: Creatures
The model is really stable, so it can be printed with most types of filament. I recommend using PTEG or ASA, with layer height set to 0.10 mm and the setting for “support everywhere” must be turned on. The size of the magnets to be glued…
Wanted to keep the frequently used kitchen utensils ready for quick grabs. There are 4 versions, that basically covered all my needs. 7.5mm short 7.5mm 10mm 20mm The files are names accordingly, if you just need one size. Hope you like…
I have an 1974 Bultaco and want to recreate the tank badge. The original is clear plastic with the image engraved from the back and painted.
My attempt to create a statue of Prince Vultan from Flash Gordon. You may need to resize to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
Espresso organizer to hang on the Ikea Hultrap System Top row is designed to hold 2 espresso cups, 1 espresso measure cup. Bottom row holds the portafilter, scoop/tamper and different filters.
The mausoleum of the Sultan of the Seljuk Empire " EMIR SALTUK " . grave
Mini catapulta: piccola ma potente. Scaglia a grande distanza piccoli oggetti e prova a colpire il tuo bersaglio.
Es una representación bastante fiel (aunque no funcional) de una CATAPULTA del Imperrio Romano siglos I y II D.C. Se trata de un diseño 100% original. Se proporciona un archivo ZIP que incluye 8 archivos STL con un total de 29 piezas para…
-Imprimir con 3 perimetros como minimo. -Sin necesidad de soporte
Recreación fan wearable del casco Mark VI [GEN3] de Master Chief en Halo Infinite, preparada como kit modular para impresión FDM doméstica. Mantiene la silueta, el visor dorado, el panelado lateral, la mentonera y el conjunto trasero…
Sultan Ahmed Cami İstanbul Türkiye Lithophane
Voici le clip pour tenir les lames occultation. J'ai besoin car les miennes de clips sont casses. J'ai reproduit en PLA. Je vous conseille prendre le filament plus souple que pla.
Sultan Ahmed Cami İstanbul Türkiye Lithophane
Sultan Ahmed Cami İstanbul Türkiye Lithophane
Wanted easier access to our tea bags, so made this rack to be hung above the counter. I'm a little unsertain about the hooks, but hope their last 😂 Made a different model earlier, where the hooks were printed seperatly. They have lasted…
escurridor de cubiertos para poner fuera de la bandeja y no molestar a los platos
I got annoyed by that the hooks of the IKEA Hultarp kitchen organizing rail (see Ikea Screenshot) all the time fell out of the rail when taking off some things for cooking. Therefore I printed these little locking parts. They lock into…
A simple keyring i've made for a friend of mine, it uses the original bultaco logo's font.
Small screws are more than enough to hold. Screws can be inserted sideways through the hex as the head is too large to fit through screw driver hole. IKEA HULLTARP https://www.ikea.com/us/en/p/hultarp-container-black-30444454/
This is a remix of the Bultaco 3D Logo by Supergus 1968. I didn't do much, just removed the stand and increased the size of the base to make it into a flat paperweight. Printed on fastest on an Ender 3, it took 8 hours. Takeaways: I…
Si tratta di una replica stilizzata della catapulta di Leonardo da Vinci realizzata per un laboratorio a scuola Qui troverete i disegni anche per il laser…
Hey everyone, YVR3DPrints here with a stand for the Echo Show 8 specially designed for the Ikea HULTARP rail hooks. The first iteration was a bit too small (as per the pictures) so I scaled it a bit larger in Fusion so it should fit…
This is a REMIX of the Prusa Mini Z-axis support brace by Fada to escape from interfering to a camera mount. Target camera mount is “Fixed Prusa MINI+ Printbed Camera Mount - Correct Hole Position” by kentnek .…
Used to connect two sections of the Ikea Hultrap Rail that I made together 03/09/2023 First attempt did not work, will update as I tinker
Bóveda de municiones para ocultar dinero
Ikea hultarp organiser box use M3x10 screw and M3 nut for hooks Print settings 0,2mm layer 5 walls no supports use brim for hooks
A holster thingy to carry Hultafors minicrowbar in your pants without destroying them. As those who own one of these crowbars knows, they are sharp when new and will rip shit up. I got tired of them making holes in my pants. Printed in…
I decided I wanted a custom gopro mount that will allow me to do horizontal and vertical recording at the same time without using multiple adapters. The dual Gopro mounts I did find would put the gopros in the same general orientation.…
Risers for mounting the IKEA hultarp farer away from the wall. You have to glue this riser to the wall. If you scale the model, only in the Z axis, you can make different distances. On top there are 2 holes made for heat set inserts. You…
PETG, layer 0.2 mm 4 loop walls
IKEA Kalas is a little leight mug (not only for toddlers) which has the ideal size for rooting plants. I took https://www.thingiverse.com/thing:3036580 and adjusted for my purposes it so that it can be clipped onto a tube of 1.6cm…
This allows you to use a M5 screw to secure for example a Ikea HULTARP magnet to a SKADIS wall. Hardware needed a M5 hex nut and bolt. insert nut into printed part and then insert into SKADIS from the back.
Spare part for Ikea Sultan Lovene slat slider (slatted frame). Print Settings Printer brand: Sovol 3D Printer: Sovol SV06 Rafts: No Supports: No Resolution: 0.2 Infill: 0% Filament brand: unknown Filament color: black Filament material: TPU
want a squishy cup, then print this. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Infill:** 20 Filament: PolyMaker TPU orangePost-Printing wash very well, as 3d prints can become very good mold…
use solid infill and use supports recomended support material: dissolvable filament it will test perscition
Arabian Desert Sultan, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
Simple pipe holding brackets to keep two pieces of conduit from rolling away from each other. The weight of the spools hold the conduit pipes in position. I cut mine to the width of the existing shelf in my closet, and removed the old…
organiser votre bureau avec ces supports pour 3 moniteurs avec tirroir (facultatif), epaisseur du bois plateau en 16mm a prevoir non inclus et 70cm lomg et 24cm large. sur le plateau du milieu prevoir des pieds de 5cm hauteur sur 24cm de…
This design was inspired by this piece of merch on WIll Wight's store: https://thewillwightstore.com/products/the-consultants-guild-mens-classic-tee Apparently nobody reads this series, but I really liked it. Category: 2D Art
This is a detailed 3D scan of an original Hultafors Talmeter 3M measuring tool. The scan was primarily made for creating custom workshop storage solutions and perfectly fitted organizers, while preserving the exact external geometry of…
Pir Sultan Abdal Statue Bring one of the most iconic figures in Anatolian folk song and Alevi culture to life with this unique 3D model of Pir Sultan Abdal. Designed with respect for his historical and spiritual significance, the statue…
Snap fit divider for the Ikea Hultarp mesh container. May also work with the non mesh containers
Este tapón es un diseño propio basado en el original de BULTACO. Para ensamblarlo, es necesario utilizar un DIN 4017 M6x16mm a mitad se impresión o en la CAPA 240. Impreso en ABS. Bajar la velocidad, debido a que es una pieza cilíndrica.…
Bezeichnung: Schultaschenhalterung zur Befestigung an einem Tischbein (3D-gedruckt) Verwendungszweck: Diese Halterung dient dazu, eine Schultasche oder einen Rucksack ordentlich und sicher an einem Tischbein aufzuhängen. Dadurch wird…
EN: Remix of the original bultaco logo keychain. Includes a standard and a taller version with a redesigned, smaller, rounder keychain loop. ES: Remix del llavero con el logo de Bultaco. Incluye una versión normal y otra mas alta, ambas…
My attempt to create Prince Vultan from Flash Gordon in Chibi form. You may want to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to…
Made a spacer to be able to use IKEA Hultarp for hanging clothes at angle in my 35mm deep Pax wardrobe.
RailRest is a one-piece cradle that hangs a cased tablet (landscape) or a phone on a round 16 mm kitchen rail - the size of IKEA HULTARP - so a recipe stays at eye level and off the counter. It clicks onto the rail from the front , swings…
A fluffy kitten in a feathered, jeweled turban with a purple ruff, huge glossy eyes and a bendy 5-link tail that prints in place. PRINT NOTES Size: 43 x 120 x 70 mm, scalable in the slicer - Printer/profile: Bambu Lab A1 mini, 0.4 nozzle,…
I attached an IKEA Hultarp rail to my aquarium cabinet and made a holder for the Chihiros feeder to go with it. v2: I’ve also added my TDS/temp meter and syringe to it.
I got annoyed by that the hooks of the IKEA Hultarp kitchen organizing rail (see Ikea Screenshot) all the time fell out of the rail when taking off some things for cooking. Therefore I printed these little locking parts. They lock into…
The Sultan makes his arguments known through the roar of artillery, and here on the Wall, debate is a much appreciated artform. My take on the Sultanate Grand Cannon, loosely based off of the French Mle 189 75mm cannon, mixed with the…
![Halo Infinite Mark VI [GEN3] R2 - Visión oculta](https://media.printables.com/media/prints/de1d5249-fd82-40f3-ad75-356fd32c94ee/images/13714879_4bdb5c05-7423-470b-b238-51541fd54182_58414f3f-3ba3-4caa-b08c-9982be6e41c2/inventarix_halo_infinite_mark_vi_gen3_r2_4x3.png)
