1,215 models
Design for bigger prints ( 1 meter tall rocket from a standard Prusa i3) : https://www.printables.com/model/467608-huge-moon-rocket A famous comics character's moon rocket. No need for screw, no extra part, no support, no gluing, self…
Print approx. €9.31–€11.38 excl. taxPreliminary estimate for one variant
Princess Luna from My liitle pony serial Printed from Prusament PLA mystic blue. Modes has extra supports for parts whitch need solid fixing. 3 perimeters infill 15% brim 7mm source of model: https://ponysfm.com/
Print approx. €11.05–€13.50 excl. taxPreliminary estimate for one variant
jujutsu kaisen Sukuna keychain single extruder multicolor ready
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Just cutted the model and putted 3 plugs and holes for correct alignment when putting together :-)
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for PETGSource material: PET
This is a kunai fridge magnet done in two pieces so you can get the handle a different color. Layer height .15 For the blade a pause is needed at 4.25 layer to put the magnet in For the handle change the filament at 85.10 Using these…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
My wife has 2 styles of commercial tuna can drainers. But when the can company went to pull tab lids, the commercial models quit working as the diameter of the new lid was slightly smaller. I took some measurements and studied the…
Print approx. €2.26–€2.77 excl. taxPreliminary estimate for one variant
należy dodać podpory
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
It's sturdy. I have printed it at 1.6mm wall with 25% infill
Print approx. €28.94–€35.37 excl. taxPreliminary estimate for one variant
Sollte mit Stützen gedruckt werden, um ein gutes Ergebnis zu erhalten, muss beim Prusa Mini um 45 Grad gedreht werden, damit es passt
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
No supports needed. Screw holes must be manually enlarged on one side of the long piece, to absorb the screw heads.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
holder for iPhone 13, iPhone 14, iPhone 15, iPhone 12
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
This model is based on SRTM 90m projected in WGS84 at 1:200000 scale when printed at 210mm x 250mm x 5.7mm (Like on a Prusa MK4). This means at the designed scale, 1cm on the model represents 2km. The horizontal contour bands represent…
Print approx. €23.89–€29.20 excl. taxPreliminary estimate for one variant
Se imprime en dos partes: la Base y la Tapa. Una vez impresas se unen con pegamento. La antena encaja con poca presión en el soporte. NO requiere soportes. En la parte trasera de la base se coloca cinta doble faz para fijarla a la…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Next iteration of this model. V1 is here: The original plate for inspecting monster health really sucks honestly and takes a lot of place on the table. Therefore I created this stand. Easy to print (with supports) and use a M3 screw to…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
This is v1 of the model. Please see the new model v2 here: The original plate for inspecting monster health really sucks honestly and takes a lot of place on the table. Therefore I created this stand. Easy to print (with supports) and use…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
The pack was meant for decorative purposes. All parts are interchangeable, insert core and glue it. Original upload date: 2023 Dec. 14 Updated Jan. 11, Core pieces.
je potřeba prolomit první vrstvu u čepele
------------------------------------- NEW AND UPDATED VERSION HERE: > Version 2 < ---------------------------------------- Kunai fidget spinner toy. Ball bearing made with 14 airsoft 6mm BBs. Free spinning with pretty low friction. Scale…
Kunai fidget spinner toy V2. Fixed for better printing. Ball bearing made with 14 airsoft 6mm BBs. Free spinning with pretty low friction. Scale by 0.4% (100.4) for PLA or whatever the shrinkage of your material is. Best printed with PETG…
Modified from WF3Ds to fit the one from the game a bit more and to make painting a tad bit easier. Recommended printing vertically with supports (tree supports work wonders on this). NOTE: some printers can handle the overhang with no…
Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…
Finger fits in hole and is able to spin around. Has "Watermark" to show it was made by me. Print Settings Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2mm Infill: 15% Notes: Tree or normal supports, doesn't matter. Category:…
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
This model can be printed in 1 part or 2 parts. 2 parts uses much less plastic because of no supports but it is a hassle to glue together. Enjoy! Cover Photo by @Roiku
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Elegant, minimal, and celestial—the Lunar Crescent Ring Holder is a stunning way to store your favorite jewelry. Designed in the shape of a crescent moon, this piece adds a mystical touch to any space while keeping rings, earrings, or…
This is a 1:32 scale model of the only crewed spacecraft to successfully land on the moon. I’ve spent 5 years carefully researching the LM from the inside-out, consulting thousands of reference photos and technical drawings. Although this…
Original Part : https://www.thingiverse.com/thing:4894625/files
Here is Kiriko Kunai from overwatch 2. I have split the knife into 2 parts and added 2 2mm holes for alignment. For stuff like this I like to use 2 pieces of filament. Im not sure the true scale of her kunai, but they normally range from…
I set out to design an organic version of Luna Lovegood's (second) wand to have a custom model to sell in my Etsy shop. I'm releasing it under a non-commercial license for personal use, because I believe in the open source nature of the…
You don't need any supports or edges. All you have to do is glue the head and fin and the outer parts together. Filling: 15% Expansion: 2 If you want to support me, join my Patreon https://www.patreon.com/Flexi__Maker or my printables…
For smaller prints use the previous version : https://www.printables.com/model/163971-moon-rocket A famous comics character's moon rocket. No need for screw, no extra part, no support, no gluing, self assembling and self standing. This…
Designed with Blender. The idea it's very simple: It is a UV sphere with three modifiers applied: subdivision (x5), displacement (with the height map image) and decimate (for triangle simplification). Then cut off the top and bottom with…
****Find all of my exclusive content on my Thangs.com profile **** Build one of the most iconic vehicles in space exploration with this Lunar Lander kit! The kit is roughly 9 inches (23 cm) tall. Grab the Astronaut model featured in the…
Ikonická královská koruna, která byla navržena tak, aby dominovala každé sbírce nebo kostýmu. Bohatá ornamentika: Spodní obruč koruny je zdobena složitými reliéfními vzory a jemným perlovým lemováním, které podtrhuje její luxusní…
Print two times this half with two connectors and than glue them together :-)
Shuriken and Kunai Hey maker! 👋 A simple and highly printable ninja set. Features: Easy to print design. Print two copies and stick them together for full effect. Great for display or cosplay props. Printing Tips: Print flat for best…
Kunaï Naruto anime style (full size 320mm) + 3 mm diameter pins (Please note attention that some pins have to be cutted to fit properly) Printed with ABS so this can be glued and smoothed with aceton. Shelf has been added for a good…
For the massive weebs out there. This is a high quality, 1:1 accurate version of the Spy's Conniver's Kunai from Team fortress 2. Designed as a prop replica (not a weapon), that you can simply print and put together. full size : 34.6cm x…
The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…
🌘 Las lámparas de luna 3D son regalos personalizados perfectos para hacer con impresión 3D. En este video tutorial os enseñamos el paso a paso de cómo poder imprimir tus propias lámparas de una forma muy sencilla. Ya no tienes excusa para…
En Naruto, el Kunai se usa casi exclusivamente para el combate. Pudiendo servir como arma arrojadiza, arma cuerpo a cuerpo e incluso para fabricar o formar parte de trampas ninja. Debido a su aerodinámica forma, este arma siempre golpeará…
Enjoy my design of the Kunai used in the anime Naruto! I've looked through numerous sites for a Kunai file that looked accurate to the anime and was comfortable in the hand. Granted, any designs in cartoons/anime will vary from episode to…
I printed in PETG with a 20% infill, triangle pattern. Bottom is optional, but print with 0 bottom layers, 10% hexagon infill. May experiment with 2 part silicone as a bottom.
Model fixed to store normal size Joints and prevent the premature damage. 🥶 You can also download my other models. 👇👇👇👇 https://www.printables.com/es/model/490432-joint-holder https://www.printables.com/es/model/534140-ufo-joint-holder
This model is a remix of Sailor Moon Luna's Box by anfelobo on Thingiverse: https://www.thingiverse.com/thing:4601074 I redesigned the box to be 3x times faster to print and to have multiple colours, the original model takes 11 hours to…
I've made a lunar lander inspired base for the 8 inch moon lamp. I've printed it in copper PLA. I was inspired by the Apollo 11 Eagle lander . Print it up side down and use the socket template to build your own socket for E14 or E27. For…
removed all colors for solid color version, added base version, colorized version all credit goes to the original creator: https://sketchfab.com/3d-models/princess-luna-colored-my-little-pony-5d6f1c1ac3ca4181807e484f00af03b5
This model is one single body, and is only possible to print in multiple colors with platform's like Bambu Lab's AMS or Prusa's MMU. A multi-part version will be released soon (ON THIS PAGE) for printers that don't have this capability.
Llavero de Gato en la Luna impreso con nozzle 0.4
Mortal Kombat X's (2015) version of Scorpion's spear/kunai.
This is a remix of Frank Deschner's twist-lock base for the 8-inch moon lamp. The remix allows the use of desk lamp bases with socket diameters of about 36 millimeters and about 28 millimeters. The moon globe itself is unchanged. I have…
You can print as one piece or in 3 Pieces for smaller printers and glue it
Supports: Yes Raft: Doesn't matter Infill: 15%
IF YOU ARE CONFUSED BY ALL MODELS READ THE END OF THE DESCRIPTION FOR ALL COMBINATIONS FOR PRINTING !!! Some other models in Naruto Collection : Kunai Shuriken Flying Raijin Kunai Dimensions (total): Length : 30.00 cm Width : 9.80 cm…
If you're into dark humor and sarcastic home decor this classic architectural sign plate with arched header, filigree, and scrollwork is designed to look like an official Victorian era institutional plaque.
Does your significant other keep buying trending water bottles but has no where to put them when taking walks with the little one? Fear not, this water bottle holder will secure even the largest trendy water bottles. Might work for other…
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
The “Bolter” Angled Foregrip for Picatinny! This Angled Foregrip features a more sturdy, higher surface area gripping surface. It puts a little space between your grip and the center axis of the rifle, which works particularly well with…
Neue Version mit etwas kleineren Löchern.
Are you brave enough to consume the king of curses? 😈👹 Calling all Jujutsu Kaisen fans! Bring the ultimate cursed object into the real world with this hyper-realistic replica of Sukuna's finger. From its repulsive fleshy texture to its…
un corno napoletano pensato per portare fortuna in casa, infatti questo corno puoi tranquillamente poggiarlo nella sua corona e tenerlo su un qualsiasi mobile in casa così da tenere le malelingue fuori dalla portata della famiglia stampa…
I was asked to 3D print a wand and Luna Lovegood's Wand by Jason Foss was the chosen one. I scaled it and add 2mm hole inside using Belnder. I printed it on my Prusa i3 mk3s after splitting it into three parts. The assembly is rather…
Better version: https://cults3d.com/en/3d-model/gadget/minato-s-kunai-guliwer06 This is replica of Minato's kunai from anime "Naruto". Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: Colorfil PLA…
a highly detailed model of the Apollo 11 lunar lander with a scale of 1:44, easy to assemble and print with any printer Lander the final dimensions of the lander are 15,97 cm by 15,97 cm by 14.69 cm the lander has 36 pieces the printing…
Set the wayback machine to a few months ago and I was hyper focused on the Key to Hamunaptra. I wasn't able to get a working model with a FDM printer that has a locking lid but I was able to make this version which does have interlocking…
Originally published here: Luna with exaggerated topography scaled one in twenty million by tato_713 - Thingiverse This model is made using the most up to date topographic map from the NASA site, from the latest MOLA data. The topography…
New and Improved! This improved Lighthouse Puzzle Box makes assembly easier and circumventing the intended puzzle solution more difficult. Magnets located in the Moon Disk and Bottom Shell have been moved for more reliable moon disk…
For dual color switch filament at layer 18
Remeshed and Fixed in Blender and Makeprintable. Scanned by "ミノカサゴ🐟 Luna Lionfish, Pterois lunulata" (https://skfb.ly/orJVW) by ffish.asia / floraZia.com
Feel free to use for your cosplays, to stick it to walls, to toy around with it and so on. It comes in three variations.
Using a map-a-planet image I created this quite hi-res model. Used spray paint and fine mortar to "dust" it. Wikipedia https://en.wikipedia.org/wiki/Mare\_Moscoviense "Mare Moscoviense ("Sea of Moscow") is a lunar mare that sits in the…
Jouet enfant , une voiture qui roule que vous pouvez imprimer en une seule fois sans supports. Dimensions environ 140 x 60 x 50 mm Astuce : une goutte d'huile pour aider la rotation des roues. Model BOUNANA V18 : diamètre des arbres…
This is model of Kunai - throwable cold weapon depicted in comic series Naruto. There are two models - full, which is actual model of the Kunai, and half, for easier print. print it twice and glue together. There are no special…
After printing the original model of the Runabout i wanted te build a bigger version. One that could have LED lights installed to make the model come to life. The model is 1/70 scale and so the total length of the model is 33 cm (13…
Hallo 3D Druckfreunde, ich biete euch hier eine kleine Deko Vase / Stiftehalter zum runterladen an. Das Design ist schlank und modern gehalten. Die Druckdetails findet ihr weiter unten. Abmessungen: Höhe: 90 mm Breite Oben u. Unten: 50 mm…
Hello, here's Miffy, a Dick Bruna's sculpture. Thanks for your download, enjoy the print!
Made it as a little gift for a friend. On my version, I added their initials on one side of the bookmark so I uploaded the f3d-file for you to do it as well if wished. The outer part of the bookmark is thinner than the inner part and the…
Check out the IMPROVED Lunar Lighthouse Puzzle Box here! This lighthouse themed puzzle box has lost its lamp room. Can you open the puzzle, retrieve the lamp room, and restore it to the top of the lighthouse? Bonus: Find the “Bonus Moon”…
Hallo und Heja BVB, was soll ich sagen, es ist eine kleine Lightbox mit BVB Logo und als Basis der Signal Iduna Park! Viel Spaß beim Drucken. Schaut gerne mal bei mir auf YouTube oder Instagram vorbei, da habe ich das ein oder andere mehr…
So this is another variation in the Key to Hamunaptra models I was making a few months back. Unlike the Non-Twist key model I posted this is 200% scale to what the movie had. If you want something more movie like please see my other post.…
Minato Namikaze's Kunai. Ready to print in halves and join with dowels. No supports and very easy to print.
Gemini Lunar Lander UNTESTED FLYING MODEL ROCKET This is a remix of the SpaceX Dragon Lander. I'll be updating this assembly guide over the next few days but a lot of the techniques used in the SpaceX Dragon Lander are applicable here. I…
This model is larger than most, if not all of the plastic models. The scale was chosen so it woud fit on a bookshelf. The ascent and descent stage are held together using 6x3mm magnets. The front of the ascent stage is removable, again…
💥 Double the flex, double the style! Bring the ultimate endgame weapon from Roblox Rivals into reality with this 1:1 scale, highly accurate 3D printable Gold / Champions Dual Kunai. Designed with a sharp, clean low-poly aesthetic that…
it is just a bunch of cool stuff
I am making the Elucidator and I saw this and was like "a metal rod ?!?!?!?!" so here is a 100% 3d printable version using pegs and glue AND THE CORRECT SIZE! Overall Length: 42.25 Inches Blade Length: 30.25 Inches. Here is the Og…
A model of the Conniver's Kunai, a knife for spy from TF2. There were a couple of other kunai models on here and Thingiverse, but none of them were very high quality, or they weren't specifically the Conniver's Kunai. I made the…
Happy printing! Infill: 10 % Nozzle: 0.4mm Support free… Dimensions for grooves: 4 mm width 5 mm width 6 mm width
Resized Bitcoin model to 5, 10 and 20 CZKs. Ideal for shopping carts. bc1qn50lfaawu9344xw2g85v0pl6nk6av644mw7la8
