Search results: unl

Sort order

1,727 models

P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,407
Likes
360
Rating
4.89
P
PrintablesAdjuro

Sunlu Dryer PTFE adapter

I am using the Sunlu Dryer for storing and using my filament. But the simple hole for letting the filament out is not enought. To fix this I designed an adapter to connect a pc4m10 or pc6m10 (conical) pneumatic connection. The hole being…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
989
Likes
152
Rating
4.95
P
Printables3DPrintscher

SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament

Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…

Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant

Downloads
917
Likes
152
Rating
5
P
PrintablesDarkmoon

Sunlu S2 Filament Dryer PTFE Tube

Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
875
Likes
138
Rating
4.96
P
PrintablesMavis1975

sunlu s4 plug

since i have my s4 i also start to use it for longterm storage but to keep the moisture to a minimum i closed the holes update : first version was low profile but you need an little knife to click the ring down but now i made it higher so…

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
287
Likes
59
Rating
5
P
Printableseponymous

Sunlu S2 Base Stabilizer (Mini/+)

Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…

Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant

Downloads
278
Likes
46
Rating
4.71
P
PrintablesMLS

Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner

Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…

Print approx. €8.77–€10.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
235
Likes
45
Rating
5
P
PrintablesGaius Pupus

Sunlu S2 airflow optimizer & active humidity exchange

you can find here the detailed description. this version requires more intervention, but is fully integrated and actively exchanges the moist air with the ambient air. I remixed “ Sunlu S2 base with ventilation ” to have an seperate and…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
37
Rating
5
P
PrintablesDanAndersen

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
21
Rating
5
P
PrintablesGearheadaddy

45 degree Sunlu Drier ptfe connector

This is a piece that will help to dispense filament from the Sunlu Drier... Put a small piece of ptfe in the adapter...I

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
10
Rating
2
P
PrintablesMroadrunnerM

SUNLU FilaDryer S1 Bracket Ankermake MC5

Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…

Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
10
Rating
0
P
PrintablesPnoreck

Sunlu FilaDryer S2 Spacer

I found a couple of spacers for the Sunlu FilaDryer S2, but they were all too loose and/or too big. Since the spacer opens the whole top of the box, it doesn't need to open it up too much. I tried a couple of spacers, and most of them…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
7
Rating
5
P
PrintablesSdvaletonee

HEXed & Brandless SunluS2 Mount

“Hexed pattern, download it while you can! No print profile because why would you print this for a prusa if you have a bambu? silly”

Print approx. €12.40–€15.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
67
Likes
11
Rating
5
P
PrintablesPrusa.printer

Case For Door unlocker chip

So I broke original and make this better case for this chip

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
5
Rating
5
P

Sunlu S2 Filament Dryer Bracket

The original bracket by @Ibot_3D was a great fit with the Sunlu S2 filament dryer, but I couldn't rely on the magnets to hold the bracket on the cart. It was too easy to knock the dryers onto the floor by brushing against them (or perhaps…

Print approx. €14.24–€17.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
5
Rating
0
P
PrintablesTec-Pete

Unleazhed MTB Mudguard hinten

Die Mudguards von Unleazhed sind eigentlich ganz hervorragend. Allerdings ist die Verankerung am hinteren Auslaufenden sehr wackelig (Velcro-Band). Aus diesem Grund habe ich eine etwas massivere Spange entwickelt, die beide…

Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
2
Rating
0
P
PrintablesYetti

Sunlu S1 Fan-Duct hinten für Fan5015

Dies Model ist aus dem gedanken aus folgenden 2 Anleitungen entstanden. Da ich zum einen den Umluft-Lüfter (Danke an Daniel Stahovic) und einen Lüfter zur Abluft einbauen wollte, habe ich dieses Teil entworfen. Die Fanblätter am Auslass…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
1
Rating
0
P
PrintablesTec-Pete

Unleazhed / MR02 / Montagepads

Bin total begeistert von diesen Schutzblechen für das Mountainbike. Leider verliere ich regelmäßig die kleinen Elemente zur Positionierung des Schutz"bleches" an der Strebe. Ohne diese ist das Schild nicht mehr richtig geführt. Das Teil…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
PrintablesFilamentjuppi

Joola Falcon table unlocking part

Joola FALCON TABLE unlocking part Spare Part is a part of the following ID: R-1-11510-71-167 As Joola couldn't or wouldn't provide me with a spare part for the unlocking mechanism, a friend and I designed the broken part. Printed in two…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
1
Rating
0
P
PrintablesJoeB

BirdWatchAI Outdoor bird feeder with camera and AI Species detection with community feed (No subscriptions) print and build it all yourself (or buy it) includes software. NO SUBSCRIPTIONS! Your data stored locally, not in cloud (unless you want it there).

See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4
Likes
5
Rating
0
P
PrintablesRockChewer

Sunlu & JAYO Bambu X1C Profiles for PETG and PLA Plus

For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.

Downloads
5,818
Likes
166
Rating
5
P
PrintablesVoltex

Sunlu FilaDryer S2 Improvement Wedge

So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…

Downloads
5,746
Likes
828
Rating
4.9
P
PrintablesLucio Badtaste

Support - Filament holder for Sunlu FC01 filament connector

The FC01 has just arrived; I've started using it and I'm very satisfied, but I encountered some issues because the FC01 slips on my work table. Additionally, the closer the filaments get to the spool axis, the tighter the coils become,…

Downloads
3,818
Likes
319
Rating
4.87
P
PrintablesPrintForge

Easy-Thread 72mm to 52mm Spool Adapter for Bambu AMS Lite for Sunlu+Anycubic+Crealty

This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…

Downloads
3,094
Likes
193
Rating
5
P
PrintablesDesignCraft

Sunlu Spool Ring Adapter for Bambu Lab AMS

DISCLAIMER: NEW SUNLU spools may be 1mm smaller in diameter. If your spool measures 194mm please try scaling down the model to 99.5% and print the Left-hand side adapter first and test the fit. Please note that this does not appear to be…

Downloads
2,958
Likes
345
Rating
4.98
P
Printablesstarfalk

Sunlu S4 Desiccant Box

A desiccant box with lid for the Sunlu Filamantdryer S4 I printed this in ASA to prevent melting. According to @avastro_56112 PETG works well without warping. Thanks for the Information! Printable without supports. Please let me know if…

Downloads
2,931
Likes
447
Rating
4.96

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Downloads
2,272
Likes
332
Rating
4.94
P
PrintablesJan

Creality K1/K1 Max/K1C Filament Sensor Side Mount Sunlu S2

EDIT: Added second version with bigger spacer, to release the tension on bowden tube. Requires 2x M3x8mm cone bolts, but tbh any M3x8-10mm bolt will do :) Bowden tube is stock, filament sensor bolts are stock! Designed for K1, but should…

Downloads
2,121
Likes
165
Rating
4.92
P
Printablesyn

Bambu Lab AMS Spool Adapter for Sunlu 250g Bambulab

Bambu Lab AMS Spool Adapter for Sunlu 250g filament 27/11/2023: I added some minor changes to reduce the bouncing when winding/rewinding a nearly empty spool. Spool 195mm v12 -------------- I kinda reinvented the wheel. I was surprised I…

Downloads
1,998
Likes
105
Rating
4
P
PrintablesYanneck

Bambulab AMS Cardboard Spool / Coil Adapter for Sunlu & Jayo Filament

Spulenadapter für Jayo & Sunlu Pappspulen, um diese im AMS von Bambulab zu nutzen. Dieser Adapter läuft in meinem AMS bereits seit mehreren Spulen problemlos und lässt sich in etwa 15 Minuten pro Seite (inklusive Kalibrierung) drucken.…

Downloads
1,871
Likes
168
Rating
5
P
PrintablesFurdTerguson

SUNLU S1 Filament Dryer M10 PTFE Guide

Mashup of Jevermeister's https://www.prusaprinters.org/prints/116779 and EveningNewbs' https://www.thingiverse.com/thing:4855279 PTFE Guides for the SUNLU FilaDrayer S1 filament dryer. I wanted a PC4-M10 fitting, and Jevermeister's…

Downloads
1,818
Likes
242
Rating
4.94
P
Printablesbinaryblaze

SUNLU S4 Extension For 3kg Spools

SUNLU S4 extension for 3kg spools. Reuploaded from Sunlu's website for more exposure. Please see the PDF guide for more instructions.

Downloads
1,815
Likes
158
Rating
5
P
Printableseds_3d_shop

Filament spool adapter 72mm to 52mm (Sunlu)

+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…

Downloads
1,769
Likes
70
Rating
4.73
P
Printablesgoonbee

Star Wars Unlimited Tokens - Multicolour

Star Wars Unlimited Tokens ready to print for multi material / multi extruder.

Downloads
1,661
Likes
114
Rating
5
P
PrintablesLordWiggle

Creality CFS lid clip for smaller spools to prevent retraction errors (SUNLU spools and others upon request)

They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…

Downloads
1,537
Likes
145
Rating
5
P
PrintablesD3D-Concept

Sunlu Filament Connector

Optimized kit for using the Sunlu FC01 filament connector. This D3D-Concept design allows you to lock the filament in pl

Downloads
1,525
Likes
205
Rating
4.81
P
PrintablesRagingRoosevelt

Extension Cord Storage from Sunlu Filament Spool (Gen2 & Gen3)

Gen3 Compatibility (update: Oct 20, 2025) Working with @JoshuaFowler_3228464, I was able to add support for Gen3 spools. Gen2 Compatibility It sounds like there's some Sunlu spools that this doesn't work with. The most recent Sunlu spool…

Downloads
1,498
Likes
1,217
Rating
5

Sunlu S2 PTFE Connector

This can fit on the front or back filament output. Sized to fit PC4-M10 fitting. The hole in the dryer lid needs to relieved slightly for the PTFE tubing to fit without interference. I printed this in PLA and attached it to my Sunlu S2…

Downloads
1,497
Likes
222
Rating
4.89
P
Printablesaaaamd

Sunlu 1KG Spool Drawer

There are two versions of the drawers. v1 - For the older sunlu spool (black plastic, 8 small holes for holding filament in place reused for drawer “hinge”) v2 - For the new sunlu spool (blue plastic, 6 small holes for holding filament in…

Downloads
1,458
Likes
487
Rating
5

Air Gap Spacer For Sunlu S2 Filament Dryer

If you own a Sunlu S2 filament dryer, then you probably know that the lack of a fan prevents the humid air from being properly circulated out of the box. One of the simplest ways to get around this is to crack open the case a bit during…

Downloads
1,402
Likes
152
Rating
4.97

SUNLU Dryer S2 Mod

This improved version is designed to prevent the filament from falling off the roller when the filament material is exhausted and to roll well without resistance. Some parts of Multiple Mechanism Auto-Rewind Spool Holder have been…

Downloads
1,390
Likes
238
Rating
3.75
P
PrintablesPugwhan

Star Wars Unlimited Tokens

The manager of our local Game Store wanted some tokens for the Star Wars Unlimited game. He had some examples he wanted copied. So I created these. No includes files for each separate token.

Downloads
1,374
Likes
83
Rating
5
P
PrintablesRon

SUNLU S2 Dryer Net

Two models for SUNLU S2 Dryer that can hold variety of things needed to be dried such as renewable silica and more. Thinner model is as wide as standard filament roll of 1.75mm 1 kg. Wider model is as wide as it can be, to fit nicely…

Downloads
1,365
Likes
410
Rating
4.9
P
PrintablesBusterblake

SUNLU Adapter for AMS lite

There is a slot in the adapter that is meant to be lined up with the little bit of filament that pops out of the inside of the hole. This was designed for the SUNLU PLA Meta, but it also fits some of their other spools. The outer diameter…

Downloads
1,350
Likes
58
Rating
4.77
P
Printables3D PRINT

Sunlu S2 - pad for better ventilation

Sunlu S2 - pad for better ventilation. Enables faster air removal from your filament dryer.

Downloads
1,337
Likes
142
Rating
5
P
PrintablesEric T

Sunlu S1 Filament Dryer Lid Support

Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…

Downloads
1,335
Likes
192
Rating
4.91
P
PrintablesDjngnear

Sunlu S2 Tabletop Tray

My Sunlu S2 would sometimes tip over towards the extruder so I decided to use the original tray to hold the dryer next to my printer. Didn't need the holes to mount it so I filled them. It holds the Sunlu S2 perfectly on a table or…

Downloads
1,334
Likes
166
Rating
5
P
PrintablesK2Van

Clearance test - a new challenge who unlocks the 0.06 mm clearance nut?

Many similar clearance tests are available here and elsewhere in internet. I could however not find one that goes tighter than 0.1 mm so modeled one up in Fusion 360. I have been able to tune my printer (CREALITY CR-6 SE with Dragon…

Downloads
1,232
Likes
93
Rating
4.88
P
PrintablesAndry Maltsev

Filament spool spacer 63mm (Sunlu, NV Print, etc..) for Bambu Lab AMS Lite and AD5X

Collet type expander for filament spool, with an inner diameter of 63mm. Eliminates spool slippage in AMS. I recommend printing from PETG, 2 walls

Downloads
1,223
Likes
141
Rating
4.75
P
PrintablesMartin_au

Sunlu S2 reverse bowden adaptor

Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.

Downloads
1,159
Likes
172
Rating
4.94
P
PrintablesMichaelQ

Sunlu FilaDryer Filament Dryer S2 PTFE Adapter

With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…

Downloads
1,152
Likes
153
Rating
4.94
P
PrintablesAndré Lind

Insert for Gamegenic Deckpod for Star Wars: Unlimited

Also included a taller variant if you want it to go all the way up to the edge of the token box The "special" variant of the insert holds the exact amount of tokens included from GameGenics

Downloads
1,152
Likes
70
Rating
5

Box for FFG Star Wars Unlimited Premium Tokens

A box to store the FFG Premium tokens for the CCG Star Wars Unlimited. There are 3 versions of the lid. One with a design that requires multicolor printing (Lid Design) One plain lid for single color (Lid Plain) One lid with a design for…

Downloads
1,148
Likes
124
Rating
5
P
PrintablesLeen15151

Stackable Sunlu Spool Drawer

Hello, this is a stackable drawer compatible with Sunlu spools. You Just need to print 4 slots and make 4 holes in every spool. Keep attention that every hole has to be aligned between spools if you want to stack them. They are connected…

Downloads
1,028
Likes
262
Rating
4.4
P
Printablesmstoica

SUNLU dryer filament guide

When using SUNLU drybox on top of IKEA Lack enclosure, to make the filament traction smooth I created a filament guide adapter to be used with the lower hole on the case. This was inspired from https://www.thingiverse.com/thing:4833453…

Downloads
1,023
Likes
163
Rating
4.81
P
PrintablesAlex

Stackable Sunlu Spool Organizer

Im Rahmen des Upcycling-Wettbewerbs für Prusament-Spulen habe ich einen Prusament Spool Organizer ( https://www.printables.com/model/1680487-stackable-prusa-spool-organizer ) erstellt. Danach haben mich einige Anfragen erreicht, ob ich…

Downloads
1,005
Likes
419
Rating
4.5
P
PrintablesAsdfg

Sunlu Filadryer S1 Plus/S2 Dryer Rack

Dryer rack that fits like a spool inside your Sunlu Filadryer S1 Plus/S2. Gaps are 1mm wide so your Silica Gel beads wont fall through. Works well with bags and loose beads. Depending on what material you print with you can crank up the…

Downloads
989
Likes
168
Rating
4.9

SUNLU Dryer S2 Mod #2

I updated the Shaft and Nut in addition to improving the Sunlu Dryer I made previously. You can check the improved Sunlu Dryer from the link below. https://www.printables.com/model/247479-sunlu-dryer-s2-mod

Downloads
971
Likes
122
Rating
5
P
PrintablesPC-Tech

Sunlu Spool Adapter for Bambu Labs AMS

Sunlu Spool Adapter for the Bambu Labs AMS. I had a 5 pack of the small Sunlu PETG and wanted to use them in the AMS. The Adapter keys onto the Sunlu Spool. Added a V2 version: Thicken the rails for better stability Thicken the threads to…

Downloads
970
Likes
107
Rating
4.64
P
PrintablesJoesTinman

Sunlu S2 Desiccant dryer tray - Faster print

I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…

Downloads
969
Likes
134
Rating
5
P
PrintablesZeVeX

The All-Age Catapult: Unleash, Educate, Entertain!

Introduction: Welcome to the ultimate playground innovation – the All-Age Catapult! This isn't your average, run-of-the-mill toy. Oh no, this is the pinnacle of fun that defies age, gravity, and possibly the patience of your neighbors.…

Downloads
956
Likes
230
Rating
5
P
PrintablesPreischl 3D

SUNLU FilaDryer S2 PTFE Adapter

Tiny Part, Big Upgrade – TPU PTFE Adapter Hey maker! 👋 This small TPU adapter makes a big difference: Features: Replace your old PTFE piece with this adapter. Insert a standard 4mm PTFE tube, held securely by friction. Quick, tool-free…

Downloads
939
Likes
162
Rating
4.7
P
PrintablesEvaMika

Sunlu S1 Filament Dryer Silica Desiccant Box

Its a fairly easy print. Box and a lid separate. I have designed it for 0.6 nozzle. (But other size nozzles will work) 0.4 layer height works great. You'll need to drill one 4-5mm hole at the back of the lid to fix the box in. How to best…

Downloads
928
Likes
239
Rating
4.76
P
PrintablesPhil-ip

Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer

The output is tangential to the coil which allows the filament to unwind much more naturally than with the original output. It is necessary to glue the part with a heat resistant double sided adhesive, this avoids screwing the part and…

Downloads
915
Likes
153
Rating
4.92
P
PrintablesPjotrStrog

Dunlop/Woods Valve Cap

Dunlop or Woods valves are usually used for inner tubes for bicycles. According Wikipedia these valves are not common in the US and are generally found on bicycles in Europe and Asia. The thread isn't exactly 1:1 to the valve thread but…

Downloads
903
Likes
89
Rating
4
P
Printableshazardous89

AMS SUNLU 250G Spool Adapter

Just a simple spool adapter for the SunLu 250G spools you can get from Amazon to work on the Bambu Lab AMS. I printed them with .16 .20 and .24 layer thickness without much difference. there is a small pin on this spool that locks it into…

Downloads
890
Likes
81
Rating
4.5
P
PrintablesDarrin

Sunlu S2 10mm Bowden Adapter/Wedge

Sunlu wedge/filament guide/bowden adapter for the S2 drier. Keeps filament at a natural unspooling angle for less resistance and in a better location than the factory hole. Threaded for 10mm fitting. Wedge allows humidity to escape.…

Downloads
882
Likes
132
Rating
4.86
P
PrintablesJC_Hood3

Creality K2 CFS 250g Sunlu adapter

I made this to adapt the new style 250g Sunlu mini spools for use in the Creality CFS used with the K2. It is sized to perfectly fit the CFS and just barely touch the top spring sliders. It also has a tab to lock one side of the spool to…

Downloads
880
Likes
98
Rating
5
P
PrintablesRecycled

Sunlu Filadryer S2 Door Vent

It looks like there is room to put a fan on the back panel, but this was much easier. Update: New version stays on dryer and doesn't fall off. Update 2: Filament guide version

Downloads
858
Likes
109
Rating
4.95
P
Printablesjornamon

Silica Gel Desiccant Box for Sunlu S2 Filament Dryer

Enhance your Sunlu S2 filament dryer's performance with this breathable silica gel desiccant box. Designed to perfectly fit inside your Sunlu S2, this box needs no additional hardware or modifications. The box is designed to hold either…

Downloads
844
Likes
132
Rating
4.71
P
Printablesedgett

Sunlu S2 Bowden Adapter

Add a Bowden tube to your Sunlu FilaDryer S2 using this improvement wedge and a M10 Pneumatic Fitting. This remix of RENOxDECEPTION's "Sunlu FilaDryer S2 Improvement Wedge W/M10 Thread + PTFE Tube" simply adds a few fillets to soften the…

Downloads
837
Likes
105
Rating
5

Deck Box for FFG Star Wars Unlimited

A box to store your deck for CCG Star Wars Unlimited. There are 4 versions of the lid. One with the Unlimited logo that requires multicolor printing (Lid Design) One plain lid for single color (Lid Plain) One lid with the Unlimited logo…

Downloads
822
Likes
86
Rating
4
P
PrintablesPlasticmonger

SUNLU S2 Dessicant Drying Tray

The model is designed to be printed in two halves and glued together. I printed mine in eSUN ABS+, but you can also use other high-temperature materials (at least PETG). Note that some PETG blends can go soft if left to cook at 70°C for…

Downloads
807
Likes
185
Rating
4.9
P
PrintablesDjngnear

Sunlu S2 Tray Mount

Mount this tray on top of Elegoo Neptune printers or any printer really. Just need a couple M5 T-Bolts. I used the two that came with my Neptune 3. One model has a hole for the power cord on either side.

Downloads
806
Likes
91
Rating
4.89
P
Printablescrankshaft

Sunlu S2 Stabiliser V4

Without a spool, the Sunlu S2 is very top-heavy and can easily topple over. This is a very simple stabiliser which is mounted to the case and provides a bit more stability. It does need longer screws, I used 18mm long which I happened to…

Downloads
801
Likes
159
Rating
4.81
P
Printablesmikeev

Sunlu S2 Mk3S Mount

Sunlu S2 mount for the top of the MK3S. Requires 2x 16mm M8 bolts to attach the tray to the mount. Requires use of the excellent Sunlu S2 Improvement Wedge . Requires 2x 16mm M8 bolts to attach the tray/base to the mount. The tray's model…

Downloads
797
Likes
170
Rating
4.84
P
PrintablesStonXX

Sunlu Filament Connector Helper Remix

Der Filament Connector Helper ist eine interessante und stabile Konstruktion, vielen Dank an den Ersteller. Ich habe eine Welle für die beiden Arme erstellt und die großen Löcher in den Armen geändert, so das diese mit der Welle…

Downloads
789
Likes
96
Rating
4.93
P
PrintablesPsytropomorph

Sunlu S4 Desiccant (Silica Gel) Dry Basket - Layer Separation Fix

When printing the beautiful original model by schiko in ASA, I experienced issues with layer separation - perhaps due to the cold environment, which prevented the build volume to heat up sufficiently. Nonetheless, I decided to do some…

Downloads
774
Likes
123
Rating
4.96
P
PrintablesHajo

SUNLU dryer holder for Prusa MK3s

A holder for the SUNLU dryer that snaps onto the frame of the Prusa MK3s plus a filament guide. Hints: Suggested PETG for strength, 0.2mm layers. Print the left holder. Then, in the slicer, mirror the holder along Z-Axis to create the…

Downloads
764
Likes
85
Rating
4.3
P
PrintablesFunkyNuggets

Funnel for Sunlu Resin Bottles & Coupler

This model has only been tested with the flat Sunlu resin bottles as displayed in the included photos. Hope you find it useful and please upload your makes! :D No Supports should be needed when printing in the tip up orientation. No…

Downloads
743
Likes
51
Rating
5
P
PrintablesJer

Sunlu S2 Wall Mount and Stand

Fusion 360 file included. I cleaned up and simplified the original mesh as much as possible, made the outer body contoured, and added optional wall mount brackets. Prints without supports. Glue stick and/or brim advised.

Downloads
740
Likes
103
Rating
5
P
PrintablesIbot_3D

Sunlu S2 Dryer Mount

I used 4x 32x8mm 30kg magnets with 4x M5x20 screws. But you can remix the step to your needs.

Downloads
728
Likes
133
Rating
5
P
PrintablesNavierIsStoked

Sunlu S2 Wedge With Angled Bowden Pnuematic Fitting

I recently added a Micro Swiss NG to my Ender 3 V2. I am going a reverse bowden route, with the eventual goal of printing some more hydroscopic filaments. So i purchased a Sunlu S2 filament dryer and used my long Capricorn tube to feed…

Downloads
723
Likes
111
Rating
4.89
P
PrintablesRVfan

QIDI Box adapter for filament rolls with less diameters like SUNLU rolls

This adapter is designed for the QIDI Box, which is a multi material system. Some filament spools—such as SUNLU rolls with a diameter of only ~195 mm—are too small to rest properly on the front and rear rollers. Instead, they sit on the…

Downloads
719
Likes
87
Rating
5
P
Printablesblecheimer

Squishy Bambu Lab AMS Lite Spool Adapter (e.g. for Sunlu)

You can find serveral Bambu Lab AMS lite spool adapters for spools with a larger inner diamenter. Most of them need lots of filament and take a long time to print. I wanted to have something simpler that does not need half a spool of…

Downloads
718
Likes
72
Rating
4.92
P
PrintablesAleksey K

Sunlu S2 Case Spacer

Sunlu filament guide for the S2 drier. Keeps filament at a natural unspooling angle for less resistance and in a better location than the factory holes. Wedge also allows humidity to escape. The hole size is suitable for friction reducers…

Downloads
717
Likes
107
Rating
4.89
P
Printables3D-Print-Bunker

Sunlu S4 knob for lid -BIG-

Englisch: What bothered me was that the knob to open the lid was too small. That's why I constructed a much larger one. This one works wonderfully. Push it on with a little force and it will hold great. The file contains the left and…

Downloads
717
Likes
109
Rating
4.95
P
PrintablesMooseBoys

Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer with holes for M3 screws (remake)

I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…

Downloads
712
Likes
110
Rating
4.9
P
Printablessverreb

Filament profile for Sunlu Easy PA

This profile was tested on a Bambu H2D using Bambu Studio 2.5.0.66 on a engineering plate using Magigoo PA as adhesive It was generated through exporting filament profile from bambu studio. Import by using File > Import > Import Configs…

Downloads
709
Likes
7
Rating
0
P
PrintablesEval

Sunlu Reusable Spool Honeycomb

This is a honeycomb model of a Hex spool compatible with sunlu refill. You can lock it using bambu reusable spool shims. I have added a space for the label.

Downloads
701
Likes
40
Rating
5
P
Printablespetruvius

Sunlu FilaDryer S2 Fix

Those who pre-ordered the Sunlu FilaDryer S2 quickly discovered you need to prop open the lid slightly to release humidity. I've been using a simple binder clip but decided to design a part to do the trick.

Downloads
693
Likes
107
Rating
4.94
P
PrintablesNUeB

Dunlop / Presta – Schrader valve adapter

My bike trailer has these *** Dunlop valves that are the worst. This adapter stays fixed to the valve(s) and makes pumping air into the tyres much easier. Printed in PETG, 0.4 mm nozzle, 0.2 mm layer height, only perimeters, arachne

Downloads
682
Likes
42
Rating
4.75
P
Printablesm0larMechanic

Sunlu S2 Mount for Elegoo Neptune 3 Pro/Plus/Max

A mount for the top of my Elegoo Neptune 3 to hold a Sunlu S2 filament dryer. This uses the screws and holes for the original holder to really secure it to the machine. I have included a two different files. A single piece and one that is…

Downloads
671
Likes
97
Rating
4.8
P
PrintablesSUNLU

Monitor Lifter_SUNLU

Robotic Arm Monitor Lifter This innovative module Robotic Arm Monitor Lifter supports monitors, iPads and laptops. Its robotic arm design is not only aesthetically pleasing but also offers exceptional flexibility and adjustability. Users…

Downloads
666
Likes
83
Rating
5

Sunlu Dryer Holder

This is a remix of SUNLU dryer holder for Prusa MK3s. I used the original model for almost a month and it got the job done. I decided to flatten out the holder so the filament rolled better. I also added spacer blocks instead of using zip…

Downloads
663
Likes
101
Rating
5
P
PrintablesChris A

SUNLU spool drawer

Made for a variant of the SUNLU spools we get in Australia, I got mine from Jaycar. There is a notch in the drawer to avoid the V on the barrel, and a pin that will insert into the slot on the bottom of the hinge barrel to locate top and…

Downloads
660
Likes
214
Rating
4.5
P
PrintablesReferentiel

E-Nable - Phoenix Unlimbited Hand Prothesis

Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…

Downloads
660
Likes
141
Rating
5
P
PrintablesChklnk

Pill Organizer 7-day 1-compartment unlabeled

A 1-week single compartment organizer for medications, small parts, and more. This one has no day labels. The thin, easy-sliding lid reveals one day at a time. 7x compartments, each slightly less than 20 ⨯ 15mm ⨯ 13mm deep (the 7th one is…

Downloads
653
Likes
96
Rating
5
P
PrintablesToxicMedz

Elegoo Centauri Carbon Sunlu S1 Dryer Holder

Simple part adaptation to work with the Elegoo Centauri Carbon, unfortunately its too large to print on the CC so hopefully you have a larger printer as well. Requires 6 heat inserts to attach the side, Fits 4 8x3mm Magnets to help secure…

Downloads
643
Likes
159
Rating
5
P
PrintablesBrody

SUNLU FilaDryer S4 Desiccant Holder

SUNLU FilaDryer S4 Desiccant Holder. FilaDryer S4 comes with two spots that allow for desiccant. I was worried the desiccant would fall through the slots in the container so I created a smaller container that fits in place that has 2mm…

Downloads
638
Likes
112
Rating
5