Counting matching models…
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
The seashell model was made out of a 3D Scan. Printing: The seashell model was printed upright with support to have a higher resolution on the surface.
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Based on the Kurama figurine as seen in Boruto (screenshot below), this little nine-tail fox demon is a print in place, with supports. I printed in orange PLA and painted with acrylic paints.
Print approx. €1.88–€2.29 excl. taxPreliminary estimate for one variant
Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Replacement blades for the Durafly Auto g2 V2. The blades are designed to be printed in 3 pieces with ColorFabb LW-pla (regular PLA may also work). Print vertically with no supports, no infill, using the supplied config file. I found that…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
As described above - 4 off versions currently. I had better success printing in PETG with textured spring steel sheet, as the PLA did not want to seem to stay stuck - YMML. Updated 12/11/2022 to include ‘Nukeproof’ logo type model…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
!!! Please Read The Description Before Printing !!! Key features: Customzie: you can choose your width of your strips, the No complicated vitamins: no bearings, or complicated components needed: .step files are provided: easy to modify…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Tomé el diseño elaborado por BAIRAMOSMANOVV en CULTS (https://cults3d.com/en/3d-model/home/serenity-sculpture), lo dimensioné para que tuviera una altura de 34 cms , luego lo corte para imprimirlo en dos partes. Utilicé soportes Orgánicos…
Print approx. €16.03–€19.60 excl. taxPreliminary estimate for one variant
Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
EN version: The original Scan was made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . :) I fixed the model to make it printable. The skull is not…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Lum - UruseiYatsura
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
Futaba Sakura A bit disappointed. I had a pretty natural looking pose until I turned it around and her hair had solidified halfway down her torso and would not turn with her body. So much work to fix… gave up and started over and ended up…
Print approx. €9.30–€11.37 excl. taxPreliminary estimate for one variant
Good news, everyone! This Planet Express logo is designed to be printed in multiple colors with filament switching. The diameter of the outer ring is 100mm. With this logo added to your spaceship, there is a good chance you will survive…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Wall Art Silhouette model of the Lamborghini Huracan STO. Adjustable size. I accept model suggestions or ideas.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
I wanted to modify how the rear of my Sakura D6 shock mounted - I wanted the mount lower and extended - so created this file! Printed in PLA with 50% infill works great. The lower screw hole is tight - but it will get there. Two files are…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Use a PC disk drive externally with this cover
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
An easy to print model. Print this angel flat with no supports. Works great in glow in the dark, gold, or white filament! Happy Holidays!
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Wall Art silhouette of the Lamborghini Huracan. Adjustable size. I accept any model suggestions you might have or want.
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
Want to travel the space? Just save your money and enjoy the ride before you grow up! Space for money? Checked! Hyperspace circuits? Checked! Quantum engine boost? Checked! Comfy chairs for the crew? Checked! On-board antigravity source?…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
Toilettenschild aus den Jurassic Park Filmen Alle Farben könne einzeln gedruckt werden oder ihr nutzt die Datei mit zwei Farbwechseln (blau, schwarz, weiss) Die Datei habe ich für den MK3s auf 80% skaliert.
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant
Please consider posting a make! Thank you! This is an adapter you can slide into a BambuLab Spool to make it compatible with FormFutura's ReFill spoolless filaments (750 grams). They have there own master spool but I don't want to make…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Ce modèle est une reproduction 3D précise du Support mural Somfy 2401496 officiel, conçu pour les caméras Somfy Security ou Somfy Indoor Camera . Il conserve les dimensions d’origine : environ 70 × 38,3 × 65 mm.…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
This is a penholder and flowerpot with fluting, that can be printed single color or with color change in layer.
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant
A configurable battery holder which can either be created as a single piece or as multiple pieces that fit in each other as a puzzle. To configure use OpenScad , you just open the .scad file and use the customizer to generate your…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant
English UPDATE: Updated stl of the space-time curvature models. In this update I have slightly modified 1/2 of the equation and made some subtle changes to the surface curvature. I include the 3mf file with the settings for the MK3.5S…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant
Magura MDRP Drinks coaster - made another but added as a remix as got the idea from original.
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Most of the work was done by MZ4250 if you somehow dont know them allready check them out, they are a genius. Thank you for allowing remixes. Yes, I only made this because of a silly joke. If you love this design and want to see more fun…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for one variant
Yamaha XT600E Secondary carb butterfly valve needs 7mm opening in primary carburator slide prior to it's opening. This tool is to make synchronization adjustment easier. Just slide this tool under the carburator slide, obviously flat side…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Disclaimer: This is a remix of the model ‘Voronoi Lattice Benchy’ by @OverflowTesting, but since the original model is deleted, I can't properly mark it as remix. His model was a single benchy, which I just copied six times and rotated…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
ENGLISH VERSION A pill box that everyone can organize according to their needs. Either for daily sorting with morning, afternoon, night, or daily Monday to Sunday. If desired, the lid can be secured magnetically. The magnets are inserted…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Use supports for the top lid. You need to open the access ports necessary for your setup with a N#11 Xacto knife, for example throttle, right aileron, Sbus an DSM Satellite, this way ports you do not use are covered. Close with 4 M2x10…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €10.45–€12.78 excl. taxPreliminary estimate for one variant
LAMBORGHINI Miura SV
Print approx. €6.25–€7.64 excl. taxPreliminary estimate for one variant
Murasaki Shikibu Murasaki Shikibu (c. 973–1014) was a Japanese novelist, poet, and lady-in-waiting at the Imperial Court during the Heian period. She is best known as the author of The Tale of Genji ( Genji Monogatari ), which was written…
Print approx. €13.40–€16.38 excl. taxPreliminary estimate for one variant
Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…
Print approx. €12.55–€15.34 excl. taxPreliminary estimate for one variant
Pour les imprimantes SV01 Pro Upgrade avec le heatbreak fullmetal https://www.amazon.fr/gp/product/B0BJTWZ5C5/ref=ox_sc_act_title_1?smid=ASUA3ZY196WTJ&psc=1 Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
I am a Big Yugioh Fan and i wanted a special Deckbox for my Cards. So i printed myself one. The Box closes not bad but you have to clean a little bit around to make sure it closes and opens properly. The first Time when i closed the Box,…
Print approx. €17.39–€21.25 excl. taxPreliminary estimate for one variant
Have a rounded emoji box for your stuff - now the box itself says what's inside! Customizing Use OpenSCAD or the makerworld customizer to adapt the emoji and sizes as needed! Multicolor model Create with type set to: “both”, and save as…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Kurama Mask : Nine-tales mask : Naruto To Boruto Designed to be easily Painted. Large offsets.
Print approx. €6.84–€8.36 excl. taxPreliminary estimate for one variant
A guide for cutting 80mm x 80mm wood beams with a circular saw with a cutting depth not big enough to cut the whole beam.
Print approx. €3.73–€4.55 excl. taxPreliminary estimate for PETGSource material: PET
Wall mount for an inroning board (optimized for LauraStar) or any other brand that uses round tubes for the base. Can be fastened to the wall using screws with 4.5mm diameter (the ones coming typcially with 6mm dowels
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Many do not know that Benchys as we imagine them were never mentioned in the Holy Book “Prusa 3D Print Manual”. Instead the test prints mentioned can be reconstructed to look a little more like this model. This e.g. also tests supports.
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
Bitte nehmt an einer Abstimmung teil, damit ich abschätzen kann, wieviel Aufwand ich in meine Beschreibungen einbringen sollte.: https://www.pww2.com/abstimmung NEU: Es gibt zwei Varianten, die sich durch die Art der Wandbefestigung…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Ersatz für Originalschlüssel Jura. Auf Wunsch - jetzt auch die STL ;-).
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
EN: The stand in the style of Greek architecture is modular and consists of the following parts: - a universal column with a thread for head screwing - 3 versions of interchangeable heads (Doric, Ionic and Corinthian) - 5 length…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
MArcador de Matelasse Rombos textura. Para decorar tortas
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Sakura elements for a coin chain. Just put a string through the two holes and align the coins evenly.
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Heads in Jars was invented sometime by the 23rd century, created by Ron Popeil . They can be used to store and preserve the heads of celebrities, and even long dead historical figures, from presidents to historical villains, through…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
A minimalist pen holder for 7 Sakura Pigma Micron pens , designed for clean looks and efficient printing. Optimised for 0.6 mm nozzle with single-wall extrusion for a light yet rigid design. Works perfectly with a 0.4 mm nozzle if you add…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Adapter Przetwornicy lampy Dodge Durango Przejście z przetwornicy kwadratowej na przetwornicę okrągłą. Może komuś się przyda
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET
pieza 14
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Duravit Klobrillen Puffer
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
C'est un support pour chargeur de batteries 18 volt de modèle DC18RC. Ce support ce fixe au mur grâce à 6 point de fixation pour vis de diamètre 4.5. Il est recommandé d'utiliser une attache de collier afin de le maintenir sur le support,…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
pieza 21
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
pieza 28
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
na pesca, por vezes temos nas canas linha metálica com este avaliador fica justo e seguro
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
copertura vetrino laser edile
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
No tiene mucha ciencia es algo en lo que estoy trabajando para pulirlo. Es un cuadro con una ranura para colocarle un vidrio y la foto por detras pegada. La idea es que vaya con luces tambien, pero estoy en proceso de encontrar los…
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
Komashura : Yo-kai Watch
Print approx. €6.61–€8.08 excl. taxPreliminary estimate for one variant
Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…
Remix of flioink's amazing samurai-inspired mask #3 (my personal favorite of them all). Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces…
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
Mini Samurai Decor . This time, I’m offering you a miniature Samurai figurine. You can freely enlarge or delicately reduce its size, while keeping in mind that to preserve all the details, maintain the layer height at 0.1mm-0.14mm . If…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
This is a scaled version of Zagatorz's amazing fidget toy. My friend had printed another version of the spiral passthrough that would break when dropped, so when I found Zagatorz's one with the thick base, I was elated! However, the shape…
This is a Remix of the awesome Samurai Mask Model 3 by flioink. I split the tooths and fangs so they can be printed in different colors on a regular printer. Just cut the imperfections with a knife on the teeth and mask to prevent a gap…
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link). I split, rotated, and…
Best printed in 1 piece standing up Should fit standard beds
Please give it a 💖 if you like it 🥰 Edit 2024-08-29 : Import error of the Ender 3 V3 Plus for Cura solved Edit 2024-07-28 : Added a “Quality Profile” Added the Ender 3 V3 Plus 👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 SE…
Get the 4 in 1 Bundle here: https://www.etsy.com/iliaspolitis3D/listing/1355739219/samurai-mask-stl-4-in-1-bundle
Samurai Warrior Figurine If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo All my photos are real and show an actual 3D-printed figure photographed by me. As always! The key to…
Print details: 0.4mm nozzle 0.2mm resolution Printed with supports for the tusks and teeth Filament: Amazon Basics Black PLA
I needed an accurate (tighter tolerance) cleat for the bottom of the Milwaukee Packout so I started from scratch and modeled my own.
Summary: The 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
Whole piece has slightly more flexion in the pinky than the split up version. Either one will need supports. Peg was designed for printing the model at full size. Base is if… I dunno, you want to remix into a lamp or something.
Ice Scraper for Car – Durable Winter Tool This sturdy ice scraper is designed to clear frozen car windows quickly and efficiently. Its ergonomic handle with a reinforced grid structure ensures strength while saving material. The wide…
Remix of flioink's amazing samurai-inspired mask #2. Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces together. Option 2 : Print the “Assembly -…
The Gura Gura no Mi is a Paramecia-type Devil Fruit which allows the user to create vibrations, or "quakes", making the user a Tremor Human. It was eaten by Edward Newgate, but upon his death, its power was stolen by Marshall D. Teach. A…
It seems as if this does not work flawlessly for everyone anymore. At the moment, I do not own a Bambu Lab Printer - therefore this project is no longer continued/updated and has not been updated for quite some time. For safety measures,…
I made another samurai inspired mask. This one is a bit bigger so it should fit wider faces without any resizing. Since there are some thin areas, to keep it light, scaling down should be done only after you verify with you slicer. Had A…
if you like this kind of stuff consider supporting me on patreon.com/wekster
I designed a mask believed to have been worn by real samurai to ward off evil spirits according to their beliefs, while also intimidating their enemies. Note: I recommend printing it using your printer’s standard settings; this model…
Update 28 July 26: regarding the seal at the bottom of the pot A user pointed out to me that the actual wall thickness at the bottom of the pot was not thick enough, resulting in a sealing problem. It took me a while to respond, and I…
Heyho Here I have a completely 3D printable pulley for you! I recently designed an attachment for my clothesline (which also works great!) and of course the idea came up to simply use a pulley! Previous designs I found online always…
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
Description Utilize the serenity of a samurai to hold your incense stick, creating a tranquil environment perfect for stress relief and wellness focused activities. Meticulously detailed, the model showcases a samurai figure with an…
I'll be honest, I didn't like some of the current cut and paste versions of the R2D2 Alexa Echo Dot 3 docks available, some of them had a lot of errors when slicing. I decided to make a "as close as possible" screen-accurate version from…
Link, Purah, and two Zeldas. They’re definitely going to need supports, and I also recommend scaling them up nice and big before slicing, assuming you want the fine details. Have fun with these, and if you want to see more, give a like…
![Futurama Space Ship - Piggy Bank Rocket [Futurama Inspired Cosmic Ship]](https://media.printables.com/media/prints/654736/images/9098547_fb814b0e-3ecf-4ca0-be08-6bf452b7e64c_5284d75e-103d-4256-ab0a-184357911a24/space_piggy.png)
