Counting matching models…
Carvana has a really unique concept to purchase a car. They have tall towers that they call car vending machines to store and display all of their cars. The Carvana towers are easily recognizable and look so cool seeing the cars displayed…
Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…
The Silvana adapter for Decathlon face masks can be used for CPAP assistance to help fight the COVID-19 disease. The functional design is inspired on Charlotte valve from Italy, redesigned from scratch with the philosophy of making it…
Sylvanas Windrunner from Warcraft rumble, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
I don't know if I should even share these, as they are far too awesome for the general public to handle. BUT! I think Optimus would want it this way. So, here they are: AUTOBOT BADGES FOR YOUR VANAGON! These fit an '88 VW Vanagon 2WD (I…
Sylvanas from Warcraft universe, nendoroid stile
Imprimer le dessin dans une couleur (épaisseur 0.3mm) et laisser le dessin sur le plateau pour imprimer la base du modèle dans une autre couleur au même endroit sur le plateau pour créer une incrustation du dessin.
It's nice to have a Volkswagen Vanagon. But as they are gaining experiance (aka become old), there occure a few technical problems here and there. Very common is that the odometer stops counting the kilometers (yes, metric!). Usually, the…
Nirvana band keychain Print Settings Printer: Anycubic i3 Mega Rafts: Doesn't Matter Supports: No Resolution: 100% Infill: 100% Category: Keychains
Nirvana, smells like ... Fan button! with 2 holes to attach to clothing. The diameter is 21-22 mm (oval shape).
Lo hice muy grande por accidente a un tamaño de 10% debería de estar bien. Scale to 10%.
Nirvana llavero/Nirvana key ring
World of Warcraft Slyvanas Bust
Crests attached to the left arm of Savanaclaw school uniforms. Flat pin back (available online or at your local craft store) is required to attach it to a sleeve. Ribbon is not included. Print in any color/filament type and spray paint…
Peça de substituição, batente fechadura de gaveta autocaravana Burstner que se estragou. Replacement part, Burstner motorhome drawer lock stop that was damaged.
This is another little project for the Volkswagen campervan: The dashboard phone stand. Funny enough, my 1990 Bluestar Multivan has neither Apple Carplay nor Android Auto. Just a little outdated, you think. Well, there is more! As we have…
Since one pin broke of my climate control cover, I designed these pins as replacement. I've removed the second pin with a dremel and replaced both pins with these printed ones. The height of the hole differs in my case. Therefore, there…
Print with PETG Change color on Z=3,60
Print from TPU Infill can be modified in both ends to 100%
HueForge Bart Simpson Nirvana Cover Picture (2 color version) You can resize the model, keep X und Y in the same relation, BUT KEEP Z AS IT IS! Model is 150x112mm in size Model is 200x150mm in size Same instruction for both models: Print…
The best way to write the contents of the storage bags/boxes/etc. you put to your freezer is to use the thinnest painter's masking tape - they will stick and hold properly in the -18 ℃ environment. The STL was generated to hold 2 pcs of…
So a while back I decided to dive into learning to sculpt in Blender and decided I would make some basic six point of articulation action figures in the process. My patrons have had exclusive access for a while but thought it was time to…
Charms for Leona, Ruggie, and Jack Models are 65mm in height. scale them smaller for earrings or bracelet charms. Printed with photopolymer resin on an Elegoo Saturn.
Havana Club Schlüsselanhänger.
This is a replacement interior fridge vent for a VW Vanagon Westfalia, with two 12V power socket mounts. The 45 degree sockets are necessary if you have something other than a stock fridge, since the aftermarket fridges take up…
Replaces defroster vents in VW Vanagon and Synchro vans, made to same dimensions as original vents. Materials Printed components Printing PLA - If you are planning on running heat through the vents use a filament with higher temperature…
A new 3D figurine generated by AI, a Chibi Kurt Cobain (Nirvana). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of…
as you see i removed some armes and some tiny supports You may need to add them yourself Have fun If you remix mark as remixed respect makers creative do not copy and publish
Print with ABS. Dremel, Glue, Done.
a nice 45vinyl adapter with the nirvana smiley
Na jedné fotografii je vidět chyba v citátu. V modelu, který si můžete stáhnout je chyba opravena.
Letrero con pie, con el nombre del grupo NIRVANA. Todo es modificable.
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Die IKEA-Leuchte “Rolfstorp” eignet sich hervorragend als günstige Ersatzleuchte für die original verbaute Transistorleuchte. Mit diesen Befestigungs-Clips lässt sich die Leuchte auch einfach wieder abnehmen um diese z.B. im Notfall im…
This is a remix of DaGaLife's Tiguan wheel cap, for a VW Vanagon. Scaled up for a 56mm hole. The Vanagon's rear axle sticks out significantly past the wheel, so a tall cap is necessary to cover it. It holds OK by itself, but I added a…
This is the updated 3D model pulled from MediaVP upgrade v4.6
This is a small plastic shield to make it easier/safer to connect jumper cables to the + terminal. The frame/body is - so sparks/shorts are an issue. Made in TinkerCad, printed on an AnyCubic i3 Mega S.
First, print the base plate. After printing the base plate, do not remove it. When printing the head image and slicing the head image, raise the coordinate height by 0.2mm to better print on the base plate. The base plate can be in…
Keychains with Nirvana logos. I hope you like it! For two color keychain you have to just pause in the middle of the print. If you like it, please check out my other designs. I'm a new designer so giving a follow would help me so much and…
This is a replacement air vent for GMC Savana / Chevy Express that incorporates a cradle which will allow you to mount an iPhone 14 Pro in an Otterbox case at the air vent on the right hand side of the steering wheel. A lightning charger…
Pieza repuesto de devanador de levanta cristales de puertas para vw gol power.
Desde hace más de 2 años este soporte para copas de vino cumple su función en nuestra caravana. Es sencillo, fácil de imprimir, fiable y colabora en mantener nuestra caravana ordenada. Imprimir con PETG y añadir los perímetros necesarios…
I found this video on YouTube to be incredibly helpful when trying to fix shifting issues in my Vanagon. The poster uses a piece of wood cut down to 23mm to make the spacer. I didn't have a piece of wood, but I did have a 3d printer. The…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
Clamp to secure the gas throttle to the diesel pump. Lost my original one so i designed a printable one.
No supports required. You can find the SVG file for build your owns designs!
This is my very first “personal” lithophane, I could not print it on my prusa MK3 because it is 24 cm high. At first I just wanted to replace a lampshade on a lamp that I had and then I thought that a Nirvana night light would please my…
Just a replacement door stopper for a Vanagon T3. Print it in flexible filament. Included is the STL file and 123D Design file. Category: Automotive
Edit: Added June 12 2026: Split into 3 parts for smaller printers. Edit2: Added June 22 2026, added flanges the 3 part split pieces to make it easier to glue together (more surface area at the joint) These valances are infamous for…
Hello Thanks a lot for the work provided by Vincent Groenhuis and his team for the awesome Silvana face mask adapter ( https://www.prusaprinters.org/prints/27214-decathlon-face-mask-adapters ) Here are some improvements/variants of the…
Injection-moulded Silvana adapter for Decathlon face masks (with white connector). This allows to provide oxygen supply to patients in CPAP applications (or filtered air for healthcare workers in PAPR applications) using the Decathlon…
printed in PLA in two colours
To keep my models free, Please LIKE and SHARE this page. File has been updated May 4, 2024 (fixed wall thickness) Nirvana Lithopane lampshade. Interior litho, exterior of lampshade is smooth. print in light colour, mounting hardware to…
This is for the Gen 4 Smallcar AC dash kit. I didn't like the way that the air vents for the dash were hard up against the brake booster, and the subsequent super tight curves required. I have the large BMW booster, so its probably better…
The auxiliary heater under the bench of the T3 Multivan is notorious to fail (I learnd after mine failed). I did the reasonable thing: I restored the heating unit and … did not install it again (I don't thend to use the car in winter). So…
2 sizes - original approx 5cm, large 7cm diameter Dough thickness best = 5mm
A new 3D figurine generated by AI, Let's Rock (Radiohead - Nirvana - The Offspring). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats,…
VW T3 Vanagon loudspeaker fitting / Halter Lautsprecher Decke VW T3 Caravelle 251035429 / 8 601 360 017
The original speakers of my 1990 T3 Mulitvan Bluestar are tired. Who would complain after 35 years of service. Apperantly they have an odd shape that is not easily available nowadays.. The outer diameter was 122, the bolt sicle diameter…
1:64 Stackable Carvana Storage Diorama stackable glue required optional parts
The original Vanagon charcoal emissions canister has been NLA for a while. A replacement is available (1H0201801C) but the bottom vent is quite different. This adapter makes it easy to hook up a ¼" host in order to plumb it into the air…
MADE WITH AI! Print at your own risk! No guarantees whatsoever. There can be differences to a real savana van. Happy printing (maybe)!
I would recomment printing it atleast in PETG so it doesnt melt in the sun
I used polyflex TPU95 to print. I upgraded my fridge on my vanagon westfalia and needed to block the hole left behind after the fridge was removed so I printed this. on the picture old and new
This is a vent guide for the dash vents on a VW Vanagon. I found the model years ago, printed it in PLA, but when I went to reprint it in PETG, I couldn't find it online. Turns out I had never thrown out the STL but since I can't find it…
This File is 150x170mm . If you have a smaller build plate you can change the size, but DO NOT CHANGE THE Z it will throw the colors off. You are not limited to the colors I used, you do not have to use bambu colors. Using the colors I…
Had a great Saturday scanning The Art Institute of Chicago with Tom Burtonwood . Here's one of the scans we captured with the Sense Scanner . More information about the scanned sculpture can be found below. Serpent medium.obj is the…
Soul Edge and Cursed Nirvana from the original Soul edge and Soul blade series created as a trophy for 404Esports. They are about a foot long but can easily be scaled up to full size should you be so inclined. Stls are watertight ready…
Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc. The weight is on the through-bolt or wood…
Closes the holes i needed to cut into the speaker housings of my Caravelle GL in order to replace the old, defective "Blaupunkt" speakers with those new "Kicker" ones. Nearly any 79mm speaker should fit. Glued everything together with 2K…
Replacement Gas Stove Knob (Westfalia, Vanagon, T3). I printed in PETG. Until now no issues with too much heat. Print Instructions Print on top. No supports needed
This Cup holder is good for not so hot drinks.
I broke another cabinet latch on my 40 year old van, so I decided to print a replacement for the broken part. Take the latch apart with the 3 screws, then use pliers to take out the 2mm pins holding the broken part in place. Put in the…
Stylus holder for UGFPV or Flysky Nirvana Radio. Here is where you can buy the stylus: https://www.amazon.com/gp/product/B07FNKYGD1/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 Category: R/C Vehicles
After a sealing ring of the rear auxiliary heater of my VW Multivan Bluestar failed, dumping the entire coolant into the carpet, I removed the unit. Obviously, I want to protect the plug to be able to reinstall the unit, if I ever want to…
I slightly modified slibbinas NV14 wall mount to add a larger rear flat area for double-sided tape, and scaled it width-wise by 2% for a looser fit on the NV14. Attached is the F360 Archive file to modify it further.
Printed in black ABS. Print Settings Printer Brand: Up! Printer: Up Plus Rafts: Doesn't Matter Supports: Doesn't Matter Category: Replacement Parts
This is a replacement part for the arm that helps move the mirror for the Volkswagen Transporter T3 Vanagon. Prints with only supports on the board. Second version with a specific cut to allow the triangular lever to move through the part…
No supports required. Explore more of my woggle designs and other Guides and Scouts accessories at www.printables.com/@Baloo Be prepared, Do Your Best, and happy scouting! Explora más de mis diseños de pañuelos y otros accesorios para…
Soporte para la bisabra que sujeta ca tapa de la cocinilla de la caravana o camper, se coloca con tornillos de 3x15 y se fija a la encimera con tornillos de 3x35 de acero inoxidable preferiblemente…. tapones hay que imprimir 10…. yo lo…
Using an aluminum tube 12x10mm To assemble, heat the tube with a hot air blower and press on the fittings. Retaining clip for rod is not included (commercially available).
I wanted to spice up my home office (aka "the Nerdcave") and there was a WS2812B LED-stripe laying around… A few moments later my printer started to print the first pieces of a 800x180mm Nerdvana marquee. You need: 750gr black PLA 250gr…
Repuesto para substitución de la tapa de la toma de corriente exterior de autocaravana. Dimensiones 107 mm x 111 mm x 8,1 mm. Recomiendo su impresión en ASA o PETG. Ajustes de impresión: Boquilla de 0,4 mm Altura de capa de 0,2 mm…
The Teavana Teapot is an easy way to brew loose leaf tea. Put in your tea leaves and hot water, let it steep, then set it on top of your mug, and the tea will drain through a strainer out of the bottom. It comes with a base plate to catch…
I printed in PETG with four walls
Einfaches Modell das eine 0,7L Havana Club Rum Flasche und 5 Dosen Cola in Schale wirft. Hatte das Modell direkt im Druck auf der Unterseite noch mit Glückwünschen für den Beschenkten beschriftet. Gedruckt in PETG auf einem Prusa MK4.…
Made a Version with D32mm for larger holes because it seems there are Vanagons with 28mm and with 32mm.
Pot knub for FlySky Nirvana.. The orinigal ones are cute but not practical Print in high resolution.. 0.05mm Category: R/C Vehicles
This is something I designed a while ago and forgot to post. Basically, I saw an Ares Superheavy and I decided to make my own missile boat superheavy tripod with WeaselTech in mind. Stat it as you please! Category: Toy & Game Accessories
Esta es mi interpretación, desde la imaginación y sin modelo, de una CARRETA de las que iban en CARAVANA los pioneros del oeste americano. Como podéis ver se trataba de un carro de 4 ruedas, entoldado de manera que servía de refugio a los…
My rig has enough holes in it so instead of drilling more I made this. Sized for PETG Bolts are M3 anything between 7-12mm should work, #6 should work as well The tension fit comes from the 4 "bumps" (shown in the last pic) that protrude…
This stunning miniature model beautifully captures her fierce, imposing presence, featuring her signature massive draconic horns, heavily spiked armor, scaled tail, and fearsome dragon-claw gauntlets. She is posed assertively atop a…
Had a request for a Lanyard replacement. Tried for awhile and couldn't get a wrap around part to work correctly so I created this. Works great. Print with 3+ walls for strength one shown is all walls (5) Category: 3D Printing
put it up against a light and you'll see it
Just a cake topper that can be used for cakes or cupcakes
Extractor cocina Caravana con dos ventiladores de PC
Had my futon in storage for a while and I lost a roller. I couldn't source a replacement anywhere online. They were all to big or wide. So, I decided to make one. Here is the futon that I have:…
Customized version of https://www.thingiverse.com/thing:1655546 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1655546 Instructions Using the following options: phone_name = S22ultra font_size = 5…
