Counting matching models…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
Parametric Model Maker: I’ve created a parametric version of this model using the Parametric Model Maker, offering an even simpler way to customise the length to your needs without any 3D editing software. Give it a try here:…
This adjustable set of drawer dividers comes in two heights, 50mm and 70mm, and various lengths from 200 to 520mm. For one divider you have to print two "HxL_TWall.stl" and one "HxL_Connector.stl" file of the same height. The first number…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
Print it and add O-Rings 15,8x3,1 Print Orientation with support for enforces only.
A modular drawer divider system that joins the esthetics of 3D printing and woodworking. 3D-Printed parts All printed parts can be customized to meet your dimensions with the parametric ModularDrawerDivider.f3d file in Fusion360.…
Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source file: https://a360.co/3vbu9B5 These are perfect for storing small parts and long,…
Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.
NOTE: If you need even more organization, you can print the “ Any Size Hanging Trays for "Modular Drawer Dividers" (Parametric ) ” to provide even more space for your stuff! These trays work great for utilizing the unused vertical space!…
I've made 25 different sizes, so hopefully you will find the one perfect for you.
I found this helped keep my Skadis Containers slightly more organised and stopped tall items falling out
I don't like to throw all of my utensils into one big container, so I've designed this internal divider for the Ikea ORDNING utensils holder. It's designed to snap into place (the upper part has a lip that grips the edge). There's also a…
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
Please checkout my other free designs at https://makerworld.com/en/@Westly Description Attached you will find several card storage dividers that fit standard BCW long boxes, Multi row boxes, and MTG Fat Packs / Pokemon Elite Trainer…
The original model from @sraj had these both sizes of boxes, but the biggest one was presented only with internal dividers. I needed it without the divider, so I needed to remix it for myself. Boxes are simple, versatile and perfectly…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
Highly customizable drawer dividers, works not only for IKEA Alex Drawer Units created by Ralf Meier
Needed a way to start better organizing my MTG collection and separating decks within boxes. These dividers make it super simple to just segment things, and visually (clearly) see what chunk of cards is “below” the divider (once you apply…
Description: Basic labeled dividers for organizing records, or other things. I included two sets of dividers, one contains a notch (works great on the IKEA Kallax shelves) to keep the dividers from sliding in too far. The other set does…
Re-posting of Yawghmoth's card dividers plus a colorless one I designed to match.
UPDATE (Mar 3, 2025): Added a divider for the long bin of the Milwaukee Packout Low-Profile Organizer I wasn't satisfied with the existing models that I've tried for the Milwaukee Packout Low-Profile Organizer : some were too thick; some…
I only use this for the top drawer of my ALEX Drawer Unit, where I have all the tools I regularly use. It is much more fun when you always have all the tools at hand and do not have to constantly rummage for them. You can scale the rails…
Divide your boxes to sort different pieces. NEW! obj. file included
Update released! Includes Maxi box (⅔ of the Trofast drawer). Set of drawer divider/inserts for IKEA Trofast - you can mix and match them however you want. Originally designed for LEGO (and hence big fillets at the bottom making it easy…
Updated 25.08.2025 Added new STLs for trays with double heights. with more room for bricks! Added 8-split 12-split and 16-split for smaller bricks. Remixed the original tray for smaller amounts of parts. 2-split, 3-split, 4-split, 6-split…
Help keep your Pokemon TCG cards organized, especially when it comes to your energy cards and/or bulk! These multi-color print dividers are the general size of a Pokemon card with a tab to help make it easy to see and get to the different…
These bin inserts are for the Akro-Mils small parts organizer to allow storage of a larger variety of small parts without worrying about them working their way under the dividers included with the storage system. Step files included for…
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Dividers for the IKEA Boaxel wire baskets. The design has holes, so the dividers can be fixed in place with cable ties. Additionally the design comes with a sliding mechanism so that the individual halves can easily be printed on a Prusa…
Check out this Remix by Kinexus A stackable TCG drawer with dividers. Uses about 350g filament , and stores 400+ penny sleeved cards. How to print : Print the Drawer flat onto the bed. Print the Drawer Base with the opening upright. Might…
Lots of different divider options to choose from. Pick the one that best fits your needs! __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about…
These little dividers are amazing for keeping your products neat and organized in acrylic nail polish displays! They are great for artist alley displays, markets, or for storefront displays. The bottom has a small tab designed to be used…
A flexible Sink Caddy for your indoor or outdoor sink. Dimensions (with lower cup): L:180mm; W:92mm; H:135mm Features Store your soap; sponges and brushes in a flexible configuration. Divider allows for 1/2 split or 1/3-2/3 split. More if…
This is a tool to split and mark any length into equal spaces with ease. The picture only shows 4 points but you can easily print more parts and add more points. In action Print instructions Make sure to assemble from the bottom. You can…
What even is this? If you're interested in a sturdier card box that uses more filament, check out Dre Wizards Stackable Trading Card Drawer . I designed this one from scratch with their design in mind (same internal drawer dimensions).…
This is a kit of brackets for making your own drawer organisers, suitable for organising drawers in the kitchen, office or workshop. The brackets are designed to be used with 3.5 mm plywood or 1/4" (6.35 mm) plywood. The height of the…
This is a card divider for standard size TCGs with similar design and measurements as those made by Ultra PRO and Ultimate Guard. As such it should be compatible with most of their current accessories. The model is oriented upside-down to…
Spare parts and complementary accessories for your Milwaukee Packout storage boxes and organizers! Accurate fit, extremely stable (more stable than the original) and suitable for all variants. With the dividers you can divide your boxes…
Additional insert options and reduce wall thickness to cut print material/time by over 50%. Remixed from benjamenjohnson design, https://www.thingiverse.com/thing:3371609 , Naming scheme: # upper/lower (deep/shallow)_alt "#" - Number of…
A sturdy, modular set of kitchen storage boxes / organizers designed for organizing packets and sachets such as baking powder, yeast, spices, and seasoning mixes. The boxes are available in widths from 70 mm to 130 mm and feature…
I printed in PLA+ at 0.28 layer height. the overall height is just under 7 CM to fit in the drawer of my tool box I also did a filament colour change to have a black base and red dividers
Use this divider to separate your Ikea MALM drawers into separate spaces. This can be useful if you have your socks, pants and tops in one drawer but don't want them to mix up. You need a build plate with at least 213mm length. No screws…
Milwaukee Packout Toolbox tray bins to help organize your toolbox trays. Bins are a very snug fit, you could just use a single bin, or an entire side. Several different combinations, including short and tall heights. The 87mm Bins make…
125mm & 150 mm sandpaper holder with floating dividers for easier organisation in the workshop. The Cradle is not my design I have remixed it a bit for my needs. I added the dividers since the use for me depens on the type of job I do. So…
I remixed the excellent Improved Milwaukee Slim Packout Bin Cross Divider for a 6 way to fit the big bin and a 3 way for the square bins.
Adds features for charging cards, ball pens and shopping cart chips to the center console divider of the VW ID.4 and ID.5. Fits for 1 Euro coins. If you need a different coin dimension, please contact me. You can print it in dual color to…
UPDATE: All new files plus 62 more sizes are now posted on MakerWorld.com . Join me over there and leave a 'Boost' if you find these helpful! Unable to print? Visit my Etsy or eBay links to purchase the prints instead! — — — — — — — — — —…
There are two different heights (100mm and 50mm) and three different divisions (quarter, eighth and sixteenth). It is possible to stack 2 dividers 50mm high on top of each other. If it dont fits in your drawers, try to tighten the screw…
I was looking for a card separator for the Pokemon TCG to divide the different types of cards but only found stuff related to Magic the Gathering. So here's my rough take. The separators are just high enough to see the top of it over the…
Modeled from scratch to optimise for strength, rigidity and a quality feel, not for “fast print”. Slightly deeper than standard bins. No magnet holes. Walls are 2.6mm thick.
Added parametric values to make the number of dividers fully customizable. Added optional filled inner lid to keep items from jumping bins Smoothed out top latch so it does not need supports added Added extra material to latch for strength
For the rest of my SKADIS things look HERE UPDATE: Added a version with 110cm internal width. I wanted a slim container for some tools on my IKEA SKADIS, So I made a box aproximatly 70x40mm inside. with 2mm walls. This uses the universal…
Alphabetic divider for vinyls plus one that reminds you where you took the last vinyl to play.
Dividers numbered 1-8 staggered so you can easily sort through. DIviders 1-4 you put in the top and middle clip while 5-8 you put in the bottom and middle clip. Each divider uses 7g of filament each.
This divides and holds the Milwaukee M18 Fuel Oscillating tool model 2836-20 in a Packout Compact organizer. Designer with print in place springs to hold various size cutters on bottom half and sandpaper with mount in top half. Added…
Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…
rambox dividers. Just getting started on this project but finally have something that fits flat on a prusa build plate. V4 has a ram logo I got from here: https://www.thingiverse.com/thing:3134647 V10 - V3 was similar to some commercial…
The original model by Noahghclark was too tall for me to fit into my tins, as the lip around the top was narrower than the body. I adjusted it to make it shorter and added slots for your thumb to slip in and grab cards easier. Also…
I wanted to separate the various junk I keep in my glovebox. I didn't find any dividers that would work for the Maverick, so I designed one. Since the glove box narrows slightly closer to the door, and that's a very difficult design, this…
13APR2023 - updated with new connectors with better tolerance to make it easier to remove and reconfigure the setups. First set of connectors were really tight tolerances and virtually impossible to remove without breaking the divider…
This is a divider for the Ford Maverick rear under-seat compartment, it utilizes the Ford FITS integrated mounts. The design is comprised of two main parts, the divider and the FITS brackets. The brackets bolt on to the divider using…
Please measure your drawer before printing. These are made for the drawers with a exact width of 29,5 cm. Apparently there multiple version of the IKEA Alex with different dimensions. If yours is wider they will be quite loose and you'll…
There are many variations of the packout dividers on Printables and Thingaverse, but I created a new model from scratch using OpenSCAD. The reason to create my own model was so I could create custom variations such as the ‘H’ shape for…
Remixed from Yawghmoth's card dividers , this time for card types and gold cards.
EDIT: Here are the Half-Height Bins . EDIT2: It took a lot longer than I anticipated, but. . . Here are the full height divided bins. Since I have already duplicated the: Milwaukee Packout Low Profile Organizer bins and the Packout…
I want to use some empty filament spools to store electric wire - but my wires are not that long, so I could fit more than one on a spool. So - parametric spool dividers it is! The OpenSCAD file can create circular dividers for spools…
Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…
Trays, dividers and labels to fit the Ridgid Pro Gear 2.0 Drawer toolbox. Should also fit Keter, Magnusson and other rebrands. You'll probably need to print the divider on the diagonal, and the trays standing up at 45 degrees with some…
2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
I created these simple dividers to separate sections of 3-ring binders. They've worked for me for a few years as both dividers and as place-markers. Printing instructions Nothing special - just slice it and print it. I used solid 100%…
Half-Width Gridfinity Divider Bins I use these to organize my small electronic components. Included Divider Bins: 3x.5 1U Divider Bin 3x.5 .5U Divider Bin 2x.5 1U Divider Bin 2x.5 .5U Divider Bin STEP files are also included if you would…
See if my improved version works better for your needs, otherwise the original still works great. These are inserts into the existing bins. Maximize space while still having the ability to remove the inserts without pulling the entire…
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Customizable drawer divider Features: created using openscad create dividers of any height, length, and thickness create connectors for dividers bigger than you can print and join two or more tight tolerances, but easy to install no…
This is a set of modular dividers to suit the Tool Box Parametric Mini . The dividers created by Ross King for the full sized tool box were the inspiration for this, but rather than a remix, these have been created from scratch to suit…
German version Für Schubladen des Sideboards im Büro brauchte ich eine Unterteilung, wollte aber die Schubladen nicht beschädigen - nicht schrauben, nicht leimen, nicht dübeln… somit habe ich Halter konstruiert, welche mit doppelseitigem…
-simple card divider for your MTG Deckbox
Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source file: https://a360.co/3v8mtzG These modified divider bins have one wall replaced with…
General Information: This is my version of a proportional divider / scale tool for artists. This tool is essential for accurately replicating the correct proportions from real life to paper/canvas. It has a modern and simple design. The…
A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…
This model is compatible with the lego system.
This is a remix of @Argo's storage boxes for the Honeycomb Storage Wall . I added dividers and made the walls a little thicker, from 1.2mm to 2mm. Huge thanks to Argo for providing .step files!
I need a solution to keep MtG cards in 800 count long boxes neatly stacked/packed at one end when the box is not full. Unfortunately, you need to print these flat on their “back” so that the thin flange does not snap along the layer lines…
Divider bins for the IKEA Trofast trays. The bins are angled nicely to use all of the space in the bin (they are wider slightly at the top) and go all the way to the top ridge so a lid can still be used. 6 bins can be put in to one…
My wife wanted some hanger dividers for our daughter's closet, so here they are :-) There are 4 with text and one blank stl. If you want to make ones with different text, I've also included a link to a model on tinkercad with two text…
These bins include cutouts specifically designed to avoid interference with the registration protrusions on the Dewalt box lids. These small triangular protrusions in the lid are intended to secure the bins in place, but with my original…
Original model was really good, but I prefer simpler shapes. Also, I cleaned up tolerances a bit, so tiny pieces, like washers, do not travel between compartments.
I have a diabetic cat, wanted to use glargine and didn't have the correct pen so I adapted to a NovoPen Echo. Its not perfect but it works so feel free to make it better if you can. It prints just ok with a 0.4 nozzle ("just") but this…
I was tired of of my work bench drawer always being disorganized, especially when opening / closing the drawes. Even drawer trays didnt help, they just moved and spilled. These pieces are designed to to work with thin strips of MDF /…
I recently bought a Stanley Storage Box, and to my surprise, the drawers did not have dividers. I made those for the Stanley 1-93-980 and 1-93-981 storage boxes, which fit perfectly. There are two types of separators: for small drawers:…
Ikea Helmer drawer dividers perfect for vase mode. Save your filament for more visible print. These drawer organizers can be printed in vase mode and will fit perfectly. I've printed them 0.3mm If you don't use the vase mode you might…
A parametric mode for creating connectors for draw dividers. the model allows you to set: The connector wall thickness The connector height The divider material thickness The number of attachments and the angle of the attachment Pre…
Using Fusion 360 and an 8-compartment model by reddaugherty I created a few different variations of a 7-day pillbox with an 8th space free for Altoids or candy of your choice! Different variations include: Starting Sunday with text on…
The film industry uses Milk Crates for many things, but I couldn't find a divider or organizer for them anywhere so I created one. The divider allows for verticle and horizontal dividers to be put into the milk crates. You can purchase…
These parametric models support toggling of label shelves, magnet pockets, Refined mounting screw. This is all in the Gridfinity Refined model standard base format. There are two types of this model, the “Standard Labels” has a label…
Divider for the PARKSIDE organizer. FOR: https://www.lidl.cz/p/parkside-organizer/p100351309
