Counting matching models…
I upgraded to an android Navigation Radio system for my Fiat 500e. Since the vents have to be removed, the air would blow freely into the dash board, These vent redirect models make sure the air goes to the small vent included on the nav…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
The Garmin Oregon 600 Navigation is otherwise a sturdy device but may become non-functional due to the degradation of rubber buttons over time. The recommendation from the manufacturer is to buy a new device, which is very environmentally…
A replacement belt clip for the MGI Zip Navigator remote control. Prints best in PETG, 0.2mm or smaller layer height so it slides on well, 100% infill. Print on its side with supports, to help prevent the little nubs from shearing off at…
I used different cases for my space navigator. All designs I used had at least one flaw: no space for the USB cord if there is space for the cord, it is not very comfortable to put the space navigator into the case So I decided to create…
It's just a mount, which sits on top of the four screw-threads on the backside of the Aoocci C6Pro.
The new Ver 2 can be found here: Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not…
Inspired by the streets of Anandapur in Disney's Animal Kingdom at Walt Disney World, this shack usually marks the entrance to a harrowing trip through the Kali River Rapids. It has that amazing lived-in feel that the rest of the park has…
This is a mount for the Bose Soundlink Flex bluetooth speaker. I wanted to attach it to my electric golf trolley - the MGI Navigator Ai. So I created the bracket for the speaker along with parts to attach it to the trolley. If you are…
A locking mechanism to secure the Garmin Zumo XT into the standard BMW navigation mount. The locking mechanism is split into 2 parts for easy printing and then gluing together. ‘XT Lock Final’ can be used to print the locking mechanism in…
Print on its side with supports so layer lines run along the length of the part (max strength) The thicker version is the re-modelled version - more space for a belt and less likely to break from flexing. I use PETG it has a little…
A mighty owl-man buccaneer with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate…
Was challenged to create a version of this spaceship from the movie. Didn't want it to be exactly…
Inspired by the streets of Disneyland's Adventureland, the Tropical Cantina served drinks to weary travelers in the center of Adventureland opposite the Jungle Cruise's boathouse. Though they closed in 1962 to make way for Sunkist I…
This part was made to replace the original control knob on my old 3dconnexion space navigator. The original rubber coating started to break down one day and was sticky to the touch/falling off the exterior. NOTE: There is a textured…
Replaces the red plastic portion of the spring-loaded clips on a Shark NV370 Navigator Lift Away Bagless Vacuum wand (yes, the handle clip and the extension clip are slightly different thus 2 files). It likely will work on other similar…
Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not compatible with the new EU…
Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…
Unlock the thrill of the unknown with our Mystical Cube Labyrinth! This captivating puzzle cube houses an intricate maze that challenges your wit and patience. Maneuver your marble through the twists and turns, solving the enigmatic…
I made a Remix of the handrest as it didn't fit my newer model spacemouse. while I was at it i added the slot for the Charger cable and a slot to put the usb dongle while its no in use. I like the shape of the original design, so I…
This vacuum attachment is meant for vacuuming in tight spaces. Specifically, it angles “down" along the long edge for concentrated suction.
Ducati Desert X - Navigation System Side-by-Side Mount PDF Instructions included! Here just the important stuff: Mind print orientation - Especially important for Part E and the new shroud for the plug. This has to be printed on the…
After some years of use the knob of my beloved SpaceNavigator became very sticky. Blame the silicon cover for it, the only downside of this great tool. I'd like to recommend using cling film to cover the sticky silicon surface, it's thin,…
This part was made to replace the original control knob on my old 3dconnexion space navigator, and as a further update to the first version, this part is now printable as a solid base and a flex filament outer grip with ridges for better…
Inspired by the streets of Disneyland's Adventureland, Tropical Importers is the spot where the Jungle Navigation Company offloads - er - offers the finest in scratch and dent merchandise brought in via their transportation systems. This…
A one piece CD tray mount for Garmin navigators with the 17mm ball joint. First I used it as is, but then glued the ball joint to the orientation I liked to make sure it doesn't move around. I printed from PLA, but direct sunlight might…
Print 2 damper from TPU. 1x M5 Nut; use Loctite or use a self-locking nut 1x M5x16 countersunk bolt No supports needed!
Bracket to hold bar for your navigation or phone on BMW R1150 GS motorcycle. Important note : This bracket is made for -street- use. If your navigation / phone is heavy and you will be riding a lot of offroad-ing, the vibrations of…
Inspired by the streets of Disneyland's Adventureland, the Bazaar has been hocking fine goods to jungle explorers and tourists alike for decades. Whether it was fine brass goods years ago or rubber snakes today, they have it at the…
A remix from dominic_97 Category: 3D Printing
I was dissatisfied by the typical windscreen or ventilation slot mounts for my Opel Corsa. The windscreen ones usually fall down when it gets hot outside, the ventilation slot mounts are just too much moving and most of them do not fit in…
This is a collection of various navigation mounts which fit on my: Questions? You can post them on reddit or advrider.com If you want, you can buy me a coffee . Chigee AIO-5 Play Requires 3D-printed parts: CRF300L – HeadLite – Navigation…
This a navigation light with the 3 colors (red, green and white) with a 112,5º arc for the green and red and 135º arc for the white light. I printed this on PETG and it has held up well. But you can print on ABS or ASA if you want. The…
Description: (Introduction - The Problem) Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did…
The original holder included with this navigation system did not suit me, because I thought the navigation system protruded too far forward and was either too high or too low. That's why I created this simple mount that held my navigation…
Crevice tools for the shark navigator that can be printed laying flat to improve print strength and stability.
Navigation Chair for the DeAgostini Millennium Falcon Hold area. This is a remix of the model by aasmaticsamurai. The file has been cleaned up a little in Fusion 360, rescaled to a larger size to fit the hold area properly and everything…
In case you have lost or broken the 4th wheel for your zip navigator golf buggy you can now 3d print your own replacement part. The original part is out of stock as I am uploading this model Hardware needed: 1 M8×90mm partially threaded…
What is this This is a ZSA Navigator holder with tenting bar, for the voyager keyboard, it allows you to switch your trackball between left and right side. Included is a second tenting bar without a holder, you should mirror whichever…
Alien - Navigator Joan Marie Lambert - 1979
My 2014 F-150's shifter started to deteriorate, which led me to look for a new shifter since you can't buy the belt cover by itself. I naively bought a shifter from a 2015-2017 Lincoln Navigator (Ford FL7Z-7D443-AA Bezel) assuming it…
Nothing big, I just made some slight adjustments to properly fit the 5-way nav switch available from Adafruit. https://www.adafruit.com/product/504 Red is Tianse PLA, Silk Purple is Amolen PLA, black is Sainsmart TPU. Category: Video Games
I bought an MGI ZIP Navigator AT but needed to lift my old Taylor Made bag about 2.5 cm to fit on buggies support yolks and straps. It took me seven versions of design and testing but this final design fits tight when clipped in, clears…
I have been a fan of this movie since childhood, but I don't remember many toys from it being released. I decided to make a 3D Printable model that can be assembled like an old fashioned model kit. I hope you enjoy it. MAKE IT SO!!!
I have a 2007 Yaris and in the middle of the dash, right in front of the speedometer, there's this convenient spot where I can rest anything flat without it rolling away. So, I made this vertical stand for my iPhone 5s and iPhone 6 (they…
Navigation bar mount for EKIY MTC-14 (same as EKIY L300) Carplay / Android Auto head unit. You can use it to attach head unit to 22mm navigation bar or handlebar of the same size. You would need following fasteners: 4x M3x5 or M3x6 heat…
This is a handrest for the SpaceNavigator Desktop edition. Your SpaceNavigator won't move around anymore when using it! I made DarthBane's model a bit smaller so I could print it on my Prusa Mini. You can either cut the pad out of foam…
A diving line spool for among other things SMB, search, navigation and soon. suitable for aporx. 30 meter (100 feet) of nylon line. Edit: Included the step file, by request, for easy modifications of the design. Print Settings Printer:…
For BMW motorbikes, there are unofficial smartphone holders with two USB charging ports that fit onto the original BMW navigation device holder and connect to the 12V power supply via the contact circuit board on the back. For these…
A flat box for the 3D Connexion Space Navigator with magnetic lid. The magnets are from the Gizeh cigarette papers. 12 magnets are required. They are 5 mm in diameter (the hole is 6 mm) and 1.6 mm high (the hole is 1.7 mm). Fusion 360…
The details to how make yourself a Carplay Navigation for your BMW Motorcycle can be seen in the video
I've seen a few really awesome designs for SpaceNavigator covers that didn't really suit my needs. For starters, I don't really need to move mine anywhere because home is where the desk is. As such I also wanted something that was really…
BMW R1250GS navigation spacer Print with 20% infill
You need brass inserts instead of nuts. A screw has been added for a more fixed installation. I recommend grinding the tip of middle screw to a point.
Diese Druck wurde mit Petg 0,6 Düse mit einer Schichthöhe von 0,35 gedruckt
A nav bar suitable for the 1st gen (2007-2009) Kawasaki Versys. There are 3 files. First part is the bracket to create a connection to the existing tower under the windshield. Second part is the bar itself. Third file is the the two parts…
The LG Magic Remote 2021 (?) suffers from an issue that the navigational/arrow keys eventually need to be pressed harder to be registered. This small shim allows the arrow keys to work again.
Hey there! Because I work as a 3D modeler, I work with a 3DConnexion Space Navigator/Mouse wireless. And at some point I noticed that my wrist hurt after all day using it. So I searched for a ergonomic stand and got inspired by Velcro,…
Shark Navigator adapter for cleaning the filter on a “iRobot Roomba Series ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+” robot. Simple, no support, without snap mechanism. As always, here is a link to the original CAD:…
For BMW motorbikes, there are unofficial (Chinese?) smartphone holders with a Qi wireless charging coil and two USB charging ports that fit on the original BMW navigation device holder and connect to the 12V mains via the contact circuit…
This is a wallmount for a Cisco Webex Navigator. You will need to be comfortable voiding your warrantee and removing the back shell of your table top navigator in order to replace it with this. You will need to add your own hole for…
Navigation Chair for the DeAgostini Millennium Falcon Hold area. This is a remix of the model by aasmaticsamurai. The file has been cleaned up a little in Fusion 360, rescaled to a larger size to fit the hold area properly and everything…
Daylight savings time means it's dark at 5pm and the Royal Enfield internal clock does not turn it to night time dark mode till 7pm. I rarely use my tripper for navigation purposes but I do like the clock function. So I decided to make an…
Make a knob for my car navigation volume I uploaded the original file so you can edit it in Fusion360
These parts allow the Zumo XT to fit into the standard BMW R1250GS Navigator 6 mount and maintains the OEM keyed locking function. The Zumo XT has slightly different dimensions to the OEM system so offset holes need to be drilled through…
A collection of ZSA Navigator shells to use with your Moonlander! First, choose whether you want the thumb shell or the side shell, and what side you want it to be on. Get that STL, then grab the opposite-side wedge STL to make sure both…
Der Halter wird unter das obere (nur drauf gesteckte) Windschild montiert. Dazu das Windschild nach oben aus den Gummis ziehen und die 4 darunter liegenden Inbusschrauben entfernen. Darunter den gedruckten Halter, ggf. mit 15mm längeren…
What is this This is a ZSA Navigator holder, for the voyager keyboard, it allows you to switch your trackball between left and right side. I have also included a (right side) shim if you use your voyager flat on your desk, it will…
Navigation mount for Aoocci U6 unit so it can fit on CF moto 450 mt without any aditional mounts, arms etc that comes in the package. It sits over the main LCD. Best printed in ABS, but you can also try with PETG. Layer height 0.2mm, 3…
In a case of form taking the upper hand on function, I present this "low poly" 3DConnexion SpaceNavigator cover. I wanted to do something more creative for the cover than my previous design. I had this idea that it should look somewhat…
This is a replacement for early model Space Navigator knobs, as over time the rubberized grip starts to severely degrade, characterized by it falling apart and feeling sticky. There are a few revisions of the space mouse. To identify, pop…
Embark on an incredible journey with this meticulously detailed 3D printable explorer figurine that brings adventure right to your desktop! This STL model captures every authentic detail of a classic adventurer - complete with safari hat,…
This is a quick model I whipped up because I always wanted some more buttons for my SpaceNavigator. This is the macropad I picked up to design around - https://www.amazon.com/dp/B0BBS3D3JV My first uploaded model! People on Reddit really…
you need 4 pieces of 2.5mm inserts and 4 screws 2.5x8mm recomended petg, abs or asa
These brackets let you customize how the Navigator trackball integrates with your Voyager keyboard . They reuse the magnet, screws, and back-plate from the original Navigator mount or buy 60x13.5x5mm magnets for example from Amazon and…
Work in progress... I lost the different versions of the freecad file, I'm designing a new one. Category: Automotive
Move your Navigator trackball to your thumb! Please see our blog post for detailed instructions and videos on repurposing the magnets of the Navigator and the Voyager tenting legs for this project. This project includes a number of files…
I do not leak, you leak! 8x3mm magnet to be glued in. Example used 15% infill. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for more pop culture magnets)
My old Space Navigator looked very terrible ;) I ve made a ring to make this thing look better and one to protect my newer Navigator! works fine for me! Printed with Prusament PETG / no Supports / 0.15 quality / 8 perimeters for non…
Replacement button for the Nissan Navigation system for my 2006 Titan. Should work for Armada and possibly other Nissan products. I printed mine in abs and smoothed it. Held up for several years in my truck till I sold it.
printed without supports, on flat side .2mm layers 2 walls Just quick fix Fits snugg
Ve sliceru je nutno rozdělit na objekty. Spojení dvou dílu bylo použito M3 šroub delka 25mm a matice.
Part of this is a remix from https://www.thingiverse.com/thing:2123500 uploaded by https://www.thingiverse.com/OE1CGS/about . The reason for the remix is because window glass available locally here in the US would not fit in the slots on…
If one of these goto mounts gets bounced around or knocked over, you stand a good chance of causing this slip nut to break inside the drive unit. Your scope will be virtually useless due to a $2 part that failed. This nut will get you…
I designed this model for my Microsoft Flight Simulator cockpit. I primarily use it with the Got Friends AS33 MSFS sim glider, but it should work with any other glider or simulator that allows undocking the LXN instrument via HDMI and…
The Ancient Compass Relic is a beautifully carved stone compass that looks like a forgotten navigation artifact from a lost civilization. The compass face features intricate markings and a prominent directional needle, all set within a…
English version below Schützt die Schnittstelle der GPS-Halterung vor Staub und Dreck, falls die Halterung nicht verwendet wird Kleine Aussparung vorgehalten, um die Blende mit dem Autoschlüssel aushebeln zu können Aus ASA gedruckt, um…
Cover for Bmw Navigator IV V VI Spare part: Bmw 77527726412 All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx All trademarks, logos and brand names…
Anyone who uses 3D CAD software needs a 3D mouse!. I have the 3Dconnexion Space Navigator, and this Thing is a wrist rest surround for it. It is in two parts which hold the 3D mouse in place to make it more comfortable and more like the…
throwback to the old days, i printed with logo facing the build sheet.
I was shocked by the high prices that are asked for navigation lighting on sailing vessels. Especially for smaller boats which have other rules concerning the lighting than larger vessels. For that reason, I bought two lights and combined…
Wydrukuj 5 warstw górnych i dolnych, 4 ściany, wypełnienie 40% trójkąt. Śruby z łbem imbusowym M5x50 (na zdjęciu zbyt długie). 4x nakrętka M5.
Navigation light for on a boat. Fits a 15mm rod as mast (in my case a stick) Print in PETG, Needed: 50cm 5mm LED COB light strip, for example https://nl.aliexpress.com/item/1005007532172895.html…
A raised "Navigator Consol" or what ever you want it to be. i use it for one of my builds it is 8" wide, each step is 10mm. the raised platform is 30mm high. there is room for miniatures at the consol i am using it for DND
This is a holder for a Bepocam navi for the Yamaha Tenere 700. The unit features GPS, optionally tyre pressure and temperature and optionally two cameras for front and back: https://de.aliexpress.com/i/1005010477994256.html The photos…
Replacement hook for shark vacuum Navigator. After printing part I would use super glue to glue it. Part dimensions 30mm x 55.1mm x 42mm Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Supports: No Filament: Hatchbox PLA…
Diametro esterno tubo aspirazione 24,6 mm Stampato in PetG Print instructions 3 perimetri 0 supporti 5mm brim
Dies ist eine 3D-Druck-Datei für einen Ersatz-Batteriedeckel, passend für den “ Massoth 8134801 DiMAX Navigator” . Ideal für Anwender, die ihren Batteriedeckel verloren haben oder deren Originaldeckel beschädigt ist. Mit diesem…
Overview This is a lightweight, 3D-printable handlebar mount tailored to the UNIT 1 Navigation Remote. It fits standard 7/8″ (22.2 mm) handlebars, offering a cleaner, more permanent installation alternative to the stock rubber-band dock.…
