558 models
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
Extruder Visualizer for Ender 3 V3 SE Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA
This is an extruder visualizer designed for the Original Prusa to replicate the iPad settings/downloading icon. It would likely fit others as well. It is for use with 8mm rare earth magnets. I added a photo of the brand I used that was…
Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
A simpre mill extruder visualizer. No magnets required. Just push it to the extruder motor shaft. EDIT: Print at 98% scale Remixed from: https://www.printables.com/model/152587-mega-extruder-rotation-visualizer-bundle/files
Do you like print like in a race? Then you will need a good brake (just joking). How to print it? - Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake…
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!
Hi ! This is a simple little gadget for Elegoo Neptune 4 Pro. You don't need to change anything on the 3D printer. It is connected to the gear on the top of the extruder. The extrusion and retraction of the filament becomes visible. The…
Laser visualizer of sound waves Sound propagates as mechanical waves through air molecules. This device contains a rubber membrane that vibrates in response to sound waves. On the membrane is a small mirror, onto which a laser is…
With the model, you can visualize how the addition of one layer looks and feels. The model can also be used as a thickness measure gauge.
All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…
Spins as extruder ejects material. Not really useful but a fun addition to your ender 3 v3 se printer.
I was fascinated by the Hypnotic Extruder Visualizer by Clement and decided to remix all three styles to fit my Ender 3 S1 Pro. Special thanks to Lasse Lausen for their remix of the same project that helped me get the right sizing to…
A scythe extruder visualizer for sprite extruders Simple print. No magnets required. Just push it to the extruder motor shaft. EDIT: Print at 98% scale and mirror X
Inspired by hitechguy2000's axis cover , I thought I definitely need a mini spool as an extruder visualizer for my sprite extruder. Luckily, Pixelle shared their beautiful mini spool design to remix and actually kineticgeek already had…
Based on the idea of many existing visualizers, see for instance Prusa's article for more information, but this one is based on the Biohazard symbol. See it in action on Youtube at https://youtu.be/k7Vee8Zn6uc . This is designed to work…
A pretty spinny thing for the front of your extruder.
Description : This 3D printable model is designed to enhance both the look and functionality of the Creality K1 and K1 Max printers. Mounted on the side fan intake, this fan visualizer spins as the fan operates, offering a visually…
This model consists of 10 parts - 1 sun gear, 1 internal gear, 1 backplate, 1 holder which attaches to stepper motor, 3 planetary gears and 3 caps which holds planetary gears in place. All parts are possible to print without any supports.…
Kinetic visualizer pistons for a more discernibly active extruder, inspired by extruder visualizers from other designers. Reciprocating Engine built to attach to your direct dive extruder motor. Can also attach to any motor which has…
This is a motor visualizer like a turbine. The model consists of three parts: the propeller, the tip and a connecting pin. It mounts interlocking. It has been printed in PETG with nozzle 0.4mm, layer height 0.15mm. The tip should be…
A simple extruder visualizer, honeycomb style. Here printed in two colors with supports, to have a black background. Check other honeycomb designs : Ender 3 S1 honeycomb collection . If you like it, then… like it! If you print it, please…
This can be used on direct drive extruders. Tested on ender 3 s1 but should work on Prusa MK3, too. I didn't use magnets, I just put it on the shaft using the hole on the back. Don’t forget to check out my other models too.
Extruder Visualizer for 6x3 Neodymium magnet filament: OVERTURE PLA mat white
Wanted a simpler version of the Hypnotic Extruder Visualizer, that fittet the Ender 3 S1 Sprite Extruder. It's two parts that i printed in PETG with 0.2mm layer height. They are made to pressfit onto the extruder stepper motor axle, and…
0.12 mm layer PLA WORKS FINE no supports no infill
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
If knickers is reading this and you'd like me to take this down, please let me know!
Simple visualizador del extrusor para la lineal de impresoras Ender S1 y S1 Pro. No requiere de imanes ni accesorios para su anclaje. traba justo con el eje del motor del extrusor.
A collection of extruder spinners I designed for the Ender 3 S1 Pro sprite extruder. I'm unsure if they will work with other makes/models but they print quick, so give it a go! You will need to buy some 4mm dia x 3mm thick magnets for…
A small collection with Saringan used by the Uchija Clan in Naruto Series. Can be used with a 8x3 magnet in the center. The design is two different Height, so can be used in MMU with two colors.
A small quality of life remix to this cool extruder visualizer gear because it was falling off constantly.
A remix of premolar's MTB Visualizer modeled after my Diamondback Release. Printing I printed mine with a 0.2mm layer height and a 0.4 nozzle and a brim on the axles. The suspension, frame and grips were modeled at increasing layer…
Just a little visualizer I whipped up
The outside swirl pattern will give the illusion of rotating 378° when the dial only move 1.8° (360°/200 steps). This is possible due to the interference of different number of windows and color notches in the base. The angle of the…
This is a Kinetic Extruder Visualizer, should work on most extruder motors. Tight tolerances, small features, challenging print (use 0.1mm layers and reduce print speeds). Magnet: 8x3mm print in place, have to insert pause to gcode,…
Just a visualizer from demon slayer. 2 files, stl and 3mf for mmu. With a hole for the magnet.
Not very much to say. It indicates extruder movement for sprite extruder
I modified a design made for an Ender 3 to work with a Prusa Mini. Original link: https://www.thingiverse.com/thing:4054237 Super glue a 8mm X 3mm rare earth magnet to the bottom. Print instructions 40% Infill Use supports
I couldn't find any extruder Visualizers that i liked that didnt require a magnet so i made my own
I wanted to create a cool X-axis visualizer for the Prusa Mini. I designed this based on a similar concept that I saw for the MK3S. This visualizer requires (1) 8x3mm magnet and super glue to attach the magnet to the X-Axis. The two…
I fixed the concentricity of the visualizer, and strengthened its connection where the coupling starts, made it easier to print as well. I had made a couple improvements to the original design and made it work with the Taurus Cooling Duct…
Because all the similar visualizer I found are either much to big (hit the fan on extruder head) or need magnet or fall off or are just “to much” I did a fast create of this small and easy version to clip on (5mm axis) the stepper motor…
I decided my Prusa MK3s needed a really cool extruder visualizer - and decided to design an animated Rick and Morty Portal. Animated Gif of the visualizer in action . Please see the Prusa Blog for details on building the inner, spinning,…
Floating ring extruder visualizer Simple and minimalist floating ring to visualize the extruder motor movements. You need to glue an 8x3mm neodymium magnet.
This is a visualizer for the extruder motor of the stock Ender3V2 as a air-cooled combustion engine design. The crankshaft, rod and piston is a print in place design and for the housing you need some support. Sure some improvements can be…
This is a test print to see what different layer heights look and feel like. This has two versions: For 0.6 mm nozzle which shows layer heights from 0.10 mm to 0.45 mm in 0.05 mm increments For 0.4 mm nozzle which shows layer heights from…
A small, discreet extruder indicator. A magnet with the size of 8x3 or 6x3mm is required.
Cult of The Lamb Visualizer
Just another Extruder Rotation Visualizer "Radioactive" Follow the Instructions here: https://blog.prusaprinters.org/visualize-extruder-motor-movements_7392/
All of us have been camping, tripped over a rope and dropped something. well I certainly have which is why I designed this simple guyline highlighter. Now you can freely walk around at night without fear of tripping over. Quick Print :)…
Use these as brass instrument players to see what your embouchure looks like when you’re playing.
The back piece should press fit into the back of the stock stepper motor. The front piece goes on the shaft. I have not tested this with the extruder housing installed since I run modified cooling. Printed in PETG at 0.2mm layer height.…
This model requires supports under the handles and inner wheel. The material that is used in the creation of this model does not matter all that much :)
How-To Print: Recommended layer height: 0.10 mm Color Change (Please see the tutorial below) Support: No needed Let the Visualizer cool down slowly on the printing plate to avoid being bent. How-To Change Filament Color: Montage: Just…
Just another visualizer for the Prusa i3 MK3S extruder. You can watch the stepper motor spin clockwise as the extruder works to push the filament out through the nozzle, or anti-clockwise when it retracts. Not that useful but nice to…
Helm wheel extruder visualizer. Attach with 6x2mm magnet. Print instructions Printed shaft-side down with supports to maintain the detail on the front surface.
Fun extruder visualizer designed for Creality Sprite extruder. layer: width .4 height: .2
A simple atomic model visualizer for extruder or other motors, designed on the Prusa i3 MK3S+. Can be connected to the extruder with 8mm magnets without adhesive.
Small gadget to help you visualize a standard XYZ coordinate system
A simple yet complex looking visualizer for the Ender 3 Extruder. Printed at .16 layer height. Takes 30 mins!
Below is a video of the x-axis motor visualizer in action when the MINI is printing the motor visualizer itself: You can see that it creates a stunning 3D optical illusion when it is moving. The disc is attached by gluing a 8 x 3 mm…
This is an Extruder Visualizer based on the epic John Cleese character from the Ministry of Silly Walks sketch by Monty Python. Check out https://www.prusaprinters.org/visualize-extruder-motor-movements/ for more info on how to use it. I…
This is a remixed version of the ninja shuriken extruder visualizer. I made the model a bit smaller to fit the sprite extruder. I also made it possible to attach it without any magnets. If the model is a bit to thight or loose, scale the…
The Prusa i3 MK3S+ LCD Knob Extruder Motor Visualizer is a scaled-down version of the LCD Knob for the MK3S+ which has an embedded rare-earth magnet for use as an extruder motor visualizer. Also works great as a refrigerator or…
Intro. This is a remix of my original geared visualizer. I have repositioned the secondary gear because I realiser that it would hit the top of my enclosure if I ever printed something that required the full height capacity. I have also…
I printed a very rough first draft of which you see in the pictures. The turret will spin around as your Z-Axis raises up. I used a good amount of support for this and printed the turret inside the warthog already. Be very careful…
Made for my Mini+. I found that magnets want to stick to the edges of the opening instead of the spinning part in the middle. I noticed the top of my Z axis rod had a small 2mm hole in the center of it so I modified this to press into…
You can easily see movement of the X, Y, and Z axes, but extruder movement is invisible. This ornament fixes that, because it rotates with the extruder motor. Now you can easily see even tiny movements of the extruder. It is simple to…
Halloween inspired visualizer
I designed this extruder visualizer based off the logo for Aperture Labs from the video game Portal for my shiny new Prusa MK3. I didn't want to deal with support material, so it lays completely flat on the print bed. In order to glue the…
Extruder movements on both MK2/S and MK3 can be quite difficult to see. Even though these rotation indicators are mostly just for a cool look, they can be surprisingly handy when you’re dealing with a jammed extruder, overtightened idler…
a miniature Prusa Mini to act as a Z-axis motor vizualizer filament swaps were used on the axis part as well as the screen part. Everything is superglued together. I used 2 8x3mm magnets to attach to the printer
Base and Rooster are designed to fit without glue, just insert the rooster into the base and you are good to go. Glue the magnet to the base and place it on Z Axis motor on your mini :). Enjoy and share your print.
Update: V2 remix with only two parts to print This is specific to Prusa mini extruder motor so you will need to modify the base snap thingy and the triangle to fit your printer's motor. (I also added an unverified version to be used for…
This is a tank shaped z-axis motor visualizer for Prusa Mini+ with an articulate turret. My Prusa Mini looked like a tank after the base upgrade, so I thought it would be cool to add a battle tank visualizer. This base design is from…
Easier to print extruder visualizer with a mount specifically designed to fit the Ender 3 V3 SE. If you just want to snag the rotor and calipers and reuse the snap on style mount from the original, it will still work. I REALLY liked the…
No magnets, perfeclty fit on motor shaft, with no interference with motor base. Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 15% Filament : HyperPLA white
Star Wars Imperial Crest Extruder Visualizer 3D printed in 2 colors, white and black. I do not have an Multi Material Unit (MMU) for my Prusa. I had to insert a filament change command in the G-code so I could change the color. It can be…
This world needs more "Resident Evil" stuff. So I created an extruder visualizer for my MK3s. Designed for a 3mm magnet. This is designed for MMU/Palette or other multi-color printers. Print instructions Category: 3D Printer Accessories…
Simple Archimedes spiral extruder visualizer. Color change at 1mm level. Glue/use 3x 8x2mm magnets (or 2x 8x3mm magnets) on the back in the recessed circle. Print in PETG/ABS if you have an enclosure, otherwise it will likely warp from…
Depending on the width of the perimeters, some parts may need to be glued or loosened a little. It is important that the parts fit freely on each other, and the rubber bands only need to be tightened slightly
Just a mangekyo sharingan for the extruder visualizer.
simple visuaizer to see steppermotor work en see any skipping used a 8 x4 mm round rear erth magnet glued in to hole. Print instructions Category: 3D Printer Accessories
To see how the extruder works in Creality Ender 3 V2/S1/S1Pro printers, I designed a nice visualizer in the shape of an alien head to be mounted on the extruder's stepper motor axis. Installation is easy, just put it on the axis of the…
Something for Mtb bikers, He still wants to fine-tune it a bit, the parts have to be loose, it may be necessary to adjust some of the holes. It is necessary to play with the length and tension of the rubber bands, they must not be very…
Just a fun visualizer for the Creality Ender 3 S1 sprite extruder (may work on others, but not sure). There's two versions of the moustache as I decided I wanted one that looks a little cooler while spinning. No supports! Prints very…
This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…
I really loved Cocian's beautifully simple extruder visualizer but I wanted something for the Z axis extruder on the Prusa Mini. Requires one 6x3mm magnet. I would recommend 4 perimeters and 100% infill, it's a very quick print! Please…
Extruder rotation visualizer. Three different models depending on the size of the magnet that you have available: d 6mm x h 8mm d 6mm x h 6mm d 8mm x h 6mm Just insert the magnet in the center. Molded in PETG, nozzle 0,4mm and layer…
May need to carve out the inner cylinder a little, depending on your printer's tolerances. It's a tight fit.
This is a extruder visualizer of a 3 blade airplane prop.
A visualizer styled like a throwing star! Printed at .16 layer height. Approx. 25 mins.
Until today, I missed the right extruder motor movement visualizer ;) Do dnes my chyběl ten správný ukazatel otáčení motoru extruderu ;) Print instructions No support, simple print... In this case PLA. Bez podpor, jednoduchý tisk. V mém…
This is a hypnotizing X-axis visualizer for the Prusa Mini. Stare at the center and hypnotize yourself while your printer prints!! ***Edit: Added a smaller version of the model to fit with the MK3S extruder motor. Print Instructions:…
Extruder visualizer Prusa mendel i2 style. No glue, No support\ It needs 3 magnets (8x3mm) to work.
Remixed a design I found on thingiverse because I have had that since I got the printer, but now wanted multicolor. Followed a tutorial from MosaicManufacturing on youtube: Thingiverse: https://www.thingiverse.com/thing:3624524 Original…
Just a simple crank for the extruder visualizer, you will need a 7x4mm magnet to attach it to the extruder as well as some glue. If you liked this project, you can now support me by buying me a pizza :)!…
