226 models
Print a piece of Space History Size : 200mm (diameter) x 2.2mm (66% of the real size) The bottom is a reproduction of the Side 1 of the Voyager Golden Record . The top is a reproduction of the record cover diagram that contains the disc…
Print approx. €3.85–€4.71 excl. taxPreliminary estimate for one variant
A communication badge from Star Trek Voyager. This a quick and easy print! The size and shape of this badge should be pretty close to the original TV version. Print instructions Should print in just about any material
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is designed to fit snugly over the magnetic feet that come with the Voyager, which provides a sturdier and…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Double Flashlight Holder for the Wrist (Star Trek: Voyager) Do you remember the "cool" double beam flashlights from the TV series Star Trek: Voyager , which are attached to the wrist? Well, why wait until the 24th century? This 3D model…
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant
This is a major revision of the previous version and reduces the print time/material consumed considerably. No supports needed! This model creates a large, sturdy leg to be used with the ZSA Voyager keyboard for a higher tent pitch. It is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
These keycaps are meant to fit the ZSA Voyager keyboard to allow for more thumb keys. The default configuration for the Voyager keyboard only has 2 thumb keys on each side. I found that too limiting, so by eliminating the number row, all…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Inspired by the original tenting bar published by ZSA and using the STL they published, I created an OpenSCAD model that's fully customizable. Parameters that can be adjusted: lateral tilt angle forward tilt angle magnet diameter and…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
See assembly diagram. The model parts snap together with pins, a drop of super glue in the pins is recommended. The magnetometer is very long. I used 2 of the 3 boom parts in my print (see photo). I added supports in the slice of all…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Introduction All aboard! Its time for the Benchy to embark on a journey… This is a take on a 3d printed version of Tsuro. It includes a new complete set of tiles and a custom-made storage box. It uses tiny benchies as tokens (scaled down…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
This remixes the thumb key design created by rfmarves. The main changes are a slightly larger thumb piece (I have fat thumbs) and the key cap more closely resembles the rest of the keys to make it match the design and fit in a little…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
As with my other 6 mm scale miniatures I am trying to challenge what is possible with regular FDM printer (Prusa MK4 in my case). This over-weaponized mech is my original creation inspired by grimdark fishfolks and that mech wargame…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps, but it works if you just need to replace one or two…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
[EN] This napkin ring model was designed for a friend who recently got married. The model consists of two parts: An airplane with a slightly cartoonish design The ring, which adheres to standard napkin ring dimensions (40 mm diameter) The…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
The black mount featured in the cover photo is the newer slim model using heat-set inserts. For the other red model I used embedded 7/16 nuts with ¼ x 20 thread, for the tripod connection, instead of heat-set inserts, in case you don't…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
I was getting sick and tired of using a pliers to get the sprinkler head out of the ground, so I made a tool that works on the Orbit Voyager II Gear Head Sprinkler this make removing and installing the sprinkler heads easy. I would…
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for one variant
Replacement shift linkage for the 2003 Chrysler grand Voyager
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
As the original handle design is flawed and easily rip from the carrier, I designed a new one that uses a better fastening method. Thank god my pet didn't get hurt from the fall when I was only left with the handle in my hand. I used a…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
This is 3D printable model of the Intrepid Class NCC-74656 Voyager from the Star Trek. The model has the variable geometry pylons so it can be displayed with the pylons down or up like in a warp. It is a kit so no glue needed. The…
3D Printed OFFROAD RC chassis 1/10 scale RC BODY available HERE Stay tuned for exciting new projects on our Facebook group For any technical support please contact the following email : [email protected] The 3 main guide listed…
CHESS VOYAGE FEATURES TWO NEW PIECE DESIGNS *for standard and magnet versions only What is “Braille Chess” version? Braille chess is a specially adapted version of chess designed for visually impaired players . It follows standard chess…
Here's my version of the PADD as seen on Voyager. It's an easy kit to print. No supports needed. Update Log October 6 2024 - V2 update - By popular request the display now has a swappable slide that you can attach graphics to for easy…
There are two inserts - one with a 0.3mm tolerance and one with 0.5mm depending on your printer tolerances. Just print, paint and glue!
I really liked the combadge designed by Aaron Rhodes so I wanted to share the stand I used for it and also a remix to print it easier. The stand has tags for Voyager and Deep Space Nine. I still need to add one for Generations since that…
The model has been cut into several section to be able to print it without support. It has been increased in size to a length of 250mm. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6…
Versions to cover common tenting slopes. The top has alignment pins and recesses for 10 mm x 3 mm magnets. Printed with 10% infill and 4 top shell layers.
The Delta Flyer Commissioned in 2375 & built by the stranded crew of the Starship Voyager. Able to accommodate 3 crew onboard, with several formidable armaments. Model is not my own however I could not find any Delta Flyer models here so…
Did some tinkering, cut the ship in parts and added holes to be able to mount them more firmly. I haven't tested to print but they look OK in S3D. Here is the Fusion file http://a360.co/2yRU6dq The V12 part 4 and 5 is 40% of the other…
Replica of the combadges worn on both Star Trek Voyager and Deep Space 9. We made a video making one of these from brass and aluminum alongside a 3D printed and painted version . The back of the badge has a spot for magnets so you can use…
Just a little "connect 4" gameset you can bring everywhere without any needs of storage bag. Size closed: 90x110x25mm Size opened: 90x110x95mm Un petit puissance 4 de voyage que vous pouvez emporter partout et qui en nécessite pas de sac…
Here is my take on a common medical device seen on Voyager. It was used as a portable brain systems monitor the patient could wear that would not hinder their regular activity. I used supports on the cover part, but if you prefer you can…
Here is my version of the medical dermal regenerator from Star Trek: Voyager. The prop was activated by the gray button and the opposite end would shine a focused blue light to be pointed at the patient. The color scheme had the body…
Here's a 29th century phaser as seen in a couple Voyager episodes. Putting it together should be easy as there are few parts. They are split up to be mostly support-free but only a little bit of support will be needed on the emitter…
Two Part fairly detailed model I knocked up for a friend Print instructions 0.25 nozzle, may use supports on the centre part to prevent warp.
This is a remex of the excellent model by David Metlesits and FleetPrinter: https://www.thingiverse.com/thing:4614314 I have made it more easier to assemble by re-splitting it into parts and adding alignment pins so that the parts go…
This is a simple kit to build the Starfleet cortical stimulator as seen on Star Trek Voyager . As all parts are separated, no painting or colour swapping is required. I modelled the prop to the best of my abilities, using photos of…
Here's my version of the Voyager mobile emitter. It uses 6x2mm magnets. The circuit board uses color swapping to get the green and gold colors. I used Prusaslicer's Arachne perimeter generator setting at .15mm layer height to get the…
Here's the larger version of the Voyager PADD. Graphics included are the 2 shown in the diagram. If you want to make your own graphics the dimensions for the outer edges are 156 x 90mm. The main image dimensions within that should be…
Check out my Amazon Page to see what kind of gear I use to make these models! The Mobile Emitter from Star Trek: Voyager! This model is hollow and made in two pieces, so you can use a small piece of circuit board to finish off the prop.…
Glue in four 6mmx2mm cylindrical magnets to clip this onto your clothing.
A small scale representation of the Voyager spacecraft. Designed in Blender completely from scratch. Can be printed in FDM format but SLA is the best option due to the complex design.
Title says it all
Update: I've made a new dock for the voyager for couch use, check it out here: https://www.printables.com/model/1261759-zsa-voyager-lapdock Updated 21.3.2024 Images show “The Dock” printed with 9% infill, PLA filament and .12mm layer…
oyager 1 and its twin Voyager 2 are the only spacecraft ever to operate outside the heliosphere, the protective bubble of particles and magnetic fields generated by the Sun. Voyager 1 reached the interstellar boundary in 2012, while…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made a stand for the excellent Star Trek - Voyager model by Sccuby. The stand is 200mm long, 60mm wide and 71mm high and designed for a make for the Star Trek - Voyager model by Sccuby and reduced in size to 40% In the pictures, my…
Maquis ranks from Star Trek: Voyager. For black bars use split version and use color swapping. Enjoy! Uses 6x2mm magnets. Buy prints of this model: Trekkie Time ebay -…
So macht das Feierabend machen noch mehr Spaß: Statt USB-C Kabel entknoten und in ein kleines Löchlein stecken, einfach das komplette Headset auf die Ablage legen und das Laden beginnt fast wie von allein. Der Schreibtisch sieht wieder…
Description This is a rigid travel case designed for the ZSA Voyager keyboard. Magnets secure the keyboard inside the case and also serve as the locking mechanism. The case’s hinge is formed from M4 screws and heat-set inserts. A key…
Box for using LTO (lithium-titanate) 66160 cells for replacing automotive 12v lead battery of B20 JIS type with 197×129×227 mm dimensions for Voyah free EV. This model is made with minimal gaps to fit to size of battery mount. ! This…
This is a kit I made for my keyboard ZSA Voyager ( https://www.zsa.io/voyager ) for 3 combined purposes: Add the tenting of the keyboard to 7.5 degrees Provide fixed location for wrist rest pads (model = Fellowes wrist pad for mouse, very…
I loved how Star Trek PADDs became real with tablets. This model was created with photo reference. Its hard to describe the feeling when you have the prop in your hand, but I got it with this one when I assembled it after printing.…
This is an additional version of Part 3 and 4 of the NCC-74959 Voyager. Displaying the model in warp flight with lifted warp nacelles. You will need Part 1 and 2 from this version:…
Hello fellow makers, I love the ZSA Voyager. However, it has become both a blessing and a curse. I take it everywhere with me and found the cloth pouch to not be enough protection for such an expensive keyboard. I created this file that…
Attempted to improve the 29th century Relativity tricorder model. I was motivated by the constant breaking of the original version's lid which led me to making some upgrades for durability and appearance. The new version of the lid works…
The USS Voyager (NCC-74656) was a 24th century Federation Intrepid-class starship operated by Starfleet from 2371 to 2378. One of the most storied starships in the history of Starfleet, Voyager was famous for completing an unscheduled…
A 3D printable mount for attaching a ZSA Voyager keyboard to a tripod. The mount has 4 guide pins for alignment and 5 magnets to hold the keyboard in place. This model is inspired by the first party tripod mount available from ZSA .…
Here is my attempt at the futuristic PADD from the last episode of Voyager. The variants of this PADD were shown in red and dark blue, but since silver is such a normal color for these that would work too. Display stand included. Update…
An easy to print replica of the Voyager spacecraft. For part 3, there is an option for no hook to remove the ring allowing you to hang the model. Piece one should be printed with a layer change. Glue is required to put the model together.…
Hard case for ZSA Voyager. Printing Print with 0.16 layer 15% Infill Lightning Iron all top surfaces Inner/Outer/Inner Support is only needed for the cover. Print with tree support. PLA-CF is recommended as it gives a nice texture and…
Unifying baseplate and aluminium keycap files for Voyager; MX socket plugs for Moonlander. Keycaps designed for aluminium CNC.
Here's a unique combadge created for the 'Hazard Team' from the classic PC game Star Trek Voyager: Elite Force. Uses 6x2mm magnets. The red parts are super tiny so its best suited for multi material printing. Display stand included. Buy…
Voyager 1 is a space probe launched by NASA on September 5, 1977, as part of the Voyager program to study the outer Solar System and the interstellar space beyond the Sun's heliosphere. Hello everyone, I have vectorised a technical…
Print at a low layer height, I used .08mm layers. I used auto body filler, and sanded up to 1200 grit. Use automotive primer and sand again. Painted with: Rust-Oleum Metallic Aluminum Krylon Gold Fusion Krylon Gloss Black And added a…
Print Instructions & Recommendations: It is highly recommended to clean the build plate with warm water and soap prior to printing to eliminate the potential adhesion problems. No support is required. 3MF files prepared in PrusaSlicer are…
This is a remix of the 'Star Trek Voyager Communicator' by 4ndreas, which can be found here. You can use this file, in combination with raft layers and a mid-print pause to make a Star Trek Communicator badge with a pin back encased in…
None of the models I found had screen accurate circuitry modeled in. They either used a paper print out or a cut up piece of actual circuit board. The included PIC is for reference painting. I also made some minor size modifications based…
I highly recommend printing the legs upside down, as this requires way less support. The stand will have to be scaled to fit your requested size. This is a remix of two great models. Thanks very much to Gman and Thingiverse user 4ndreas…
My Brother is a Star Trek fan, so i create some Padds for him. Category: Costume
A remix of the KLP Lamé keycap set by braindefender made specifically for the Voyager from ZSA. These are nice, lightly-curved keycaps for your Voyager that give you a slight keywell effect and infinite color customization possibilities.…
This is a non-exact replica of the stand included with the Star Trek: Voyager Ship toy released by Playmates in the 90s alongside other ships in the line. I've owned the toy for awhile but never had a stand for it as I bought it pre-owned…
It's for G2 bionicle heads (okoto heads). It's a remix
Quick model of the combadge from the Star Trek: The Next Generation / Voyager future timeline episodes. This model uses 8x3mm magnets to allow you to pin this badge to clothing. Just print out the model and pop the magnets in! Check out…
A simple storage case with sliding lid that stores my Plantronics Voyager Legend headset without it rattling around, the ear piece disappearing and a dedicated spot for the short charging USB cable. The lid should slide in easily as long…
English description (deutsch darunter): The insert consists of many practical parts to store all the game material. It also helps with setting up and speeds up the dismantling of the game. The box closes flush and can also be stored…
Voyager -Intrepid Class Star Ship Remixed secondary hull to accommodate for an optional open Shuttle bay. Check out Martin's original model. Great Design & ingenuity. Original model is absolute quality, & now with the optional open…
Protective grille for the lower part of the car bumper Voyah Free Rest 2023-2024
This is a model of the bottom shell for a ZSA Voyager keyboard, which was developed by and originally published on the ZSA site . The model includes exact measurements, screw cutouts, and markings, it is intended to be used to design…
A simple stackable carry case for the voyager. the case can be stacked with the cover, or thanks the small magnets inside the case you can flip it on itself to save a bit of space. you need : 6x3 magnet for the feets and the layers (20 in…
This is a remix of Martin's stand for the USS Voyager
Printed it with PLA+ sideways, added small support for the pin, interface layer won't be visible anyway afterwards.
Remix de l'excellente boite originale, juste pour améliorer l'impression (ASA)
As for the Daft Punk it was an old one I did quite some time back. https://www.thingiverse.com/thing:2395966 But do a search on Daft as there are plenty of better models available ; ) Print instructions Category: 3D Printing
If you downloaded the model, it means you liked it! If you like it, put a like mark!😜😜😜
For when you don't have a table, or if your a couch potato like me Printed with .2mm layerheight, no supports. OpenSCAD model available here if you need to adapt it to your preferences. To print the right half, just mirror the parts in…
The twin spacecraft Voyager 1 and Voyager 2 were launched by NASA in separate months in the summer of 1977 from Cape Canaveral, Florida. As originally designed, the Voyagers were to conduct closeup studies of Jupiter and Saturn, Saturn's…
Wanted to hang this fantastic model of the Voyager ( https://www.thingiverse.com/thing:2556130 ) instead of using the desktop stand. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: Hobby Print…
Boite à fermeture magnétique permettant de transporter le jeu Seven Wonders duel. Plusieurs éléments on été retirés pour optimiser la boîte : les pièces de valeur 6 le pion militaire les règles le pavé de score (seules quelques feuilles…
Star Trek display of Enterprise 1, Enterprise D, Voyager, and Defiant, for mounting to a mirror surface, with magnets. Do not use standard mirrors, they have glass in front of the mirror surface and that will cause a visible gap in the…
A display stand for your BT21 crew, built around a little piece of their story: Tata and Van traveling across the stars from Planet BT to gather their friends and bring them home to Earth. The background is shaped from the BTS wing logo,…
a small and light travel version of Checkers. Token have a small magnet (diameter 10 mm x 1 mm) and a piece of thin thickness iron sheet (for me reused boxes of cigarillos, about 0.3-0.4 mm) glued in between the base and slabs of the…
There are changes in the mounting screws lengths, so take this into consideration. VOYAGER_MK1_NEW_BATTERY-HOLDER_LIPO_60C - require normal supports on build plate All other objects require NO supports - pre-supported by me if necessary.…
Here's my updated version 2 of the Endgame tricorder posted on Thingiverse a long time ago. The v1 was tricky to make with the tolerances being too tight and the .png graphics needing to be fine-tuned to fit. This v2 features options for…
Introducing the Voyager! A shroud for the SB1 blaster by GavinFuzzy. This kit includes a railed and railless option, and options for a standard and extended muzzle. This kit prints with minimal supports, as the only suggested supports are…
Tenting bar for the ZSA Voyager keyboard, which was developed by ZSA and originally published on the ZSA site . The bar creates a 5º angle, includes alignment pins, and has a 10mm x 4mm recess for magnets.
This is a earhook for the Plantronics Voyager Edge Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: Doesn't Matter Supports: No Resolution: 0.10 Infill: 100% Notes: 8 min printing time Category: Audio
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
If you find my designs useful, please consider sending a tip Replacement clip for the Pet Voyager 200 Cat Carrier. I added re-enforced areas which the original don't have to stop it snapping at the weaker points. Can be printed in PLA but…
Assembly You need 8 magnets Outter Diameter: 10mm Inner Diameter: 3mm (with chamfer) Length: 3mm 4 tenting legs (see image) https://www.amazon.com/dp/B0BY8J4L7X
![[EN] Napkin Ring Travel/Airplane Theme [FR] Rond de serviette thème voyage/avion](https://media.printables.com/media/prints/9af40b10-ccd7-435d-8cd1-8d342eda60ad/images/9847238_d8e456b1-9ab3-4671-9fa7-5e2ffb4f86c5_319012ab-c052-4499-bfb6-6bac836509ba/render3.png)
